Hello! I have an P8Lite ALE-L21 unlocked and by mistake I delete the system.. Now I don't have OS to boot
What can I do now to have back?
Download the rom for your phone then install the rom using the recovery system op the phone.
If that doesn't work try flashing the rom through fastboot.
EpicBas said:
Download the rom for your phone then install the rom using the recovery system op the phone.
If that doesn't work try flashing the rom through fastboot.
Click to expand...
Click to collapse
I tried both but it dosen't work
I don't find source with system.img
Use this http://forum.xda-developers.com/showthread.php?t=2433454&page=31 to extract the system.img
- Fastboot flash boot boot.img
- Fastboot flash recovery recovery.img
- Fastboot flash cust cust.img
- Fastboot flash system system.img
- Fastboot reboot
Use those commands and I hope it will be fixed.
I was on cm-13 nightly builds and had error "asus_trustzone==1".So I had to go back to stock rom,I tried to flash back2stock.zip and sideload but failed. So I flashed Asus pre-rooted rom using cmd ie....
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
From then bootloader oem commands are not working, twrp is not re-booting into twrp and fastboot mode and I'am not able to flash any custom rom .
Please Help!!!
Niteesh kumar said:
I was on cm-13 nightly builds and had error "asus_trustzone==1".So I had to go back to stock rom,I tried to flash back2stock.zip and sideload but failed. So I flashed Asus pre-rooted rom using cmd ie....
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
From then bootloader oem commands are not working, twrp is not re-booting into twrp and fastboot mode and I'am not able to flash any custom rom .
Please Help!!!
Click to expand...
Click to collapse
Goto the thread below and unlock bootloader as described and then try to flash custom ROMs.
http://forum.xda-developers.com/zenfone-2-laser/general/guide-unlock-bootloader-asus-unlock-app-t3405850
redmi 2
still have the luck?
no recovery mode, just fastboot
i have tried
- flash twrp ( restart and back to bootloop logo)
- fastboot reboot-edl ( still back to loop)
- flash with miflash
- repartition - https://forum.xda-developers.com/redmi-2/how-to/how-to-erase-partition-table-redmi-2-t3520410
- fastboot flash direct method - https://forum.xda-developers.com/redmi-2/how-to/error-resolved-t3324791
any suggest?
Thank you in advance
1.try miflash and flash rom according to your device... and look at progress (some doesnt flash just shows and finish fast) then try with another version of miflash, flash it it will take few minutes
2.if u r still in bootloop after these all ( i faced so many times dnt wrry )
then flash twrp, fastboot boot twrp...
flash any custom rom
I had the same problem, flash twrp and install a custom rom, it worked for me
Tried this method.Worked for me
1.Download the official fastboot rom from the official miui site
2.Check whether ur device is recognised or not
3.Install minimal adb and fastboot
4.Type these commands
fastboot flash system system.img
enter
fastboot flash boot boot.img
enter
fastboot flash recovery recovery.img
enter
fastboot flash cache cache.img
enter
if u want to remove all userdata then
fastboot erase userdata
fastboot flash userdata userdata.img
fastboot reboot.done!!!
I have same issues, when I unplug the charge the phone restart with bootloop, it is on, off and on and off, i cant go to recovery mode if not i charge, i just can go to fastboot mode if I don't plugged in my charge. And I can't go to bootloader menu's
Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus 8 in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus 8 to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
DOWNLOAD
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus 8
BRANDED PHONE
For now branded device are not supported
MANUAL FLASH: Windows - OSX - Linux
If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here
Is reccomended to format data or the rom cannot boot:
Code:
fastboot -w
Others Commands to flash a fastboot rom
Code:
fastboot flash aop aop.img
fastboot flash bluetooth bluetooth.img
fastboot flash boot boot.img
fastboot flash dsp dsp.img
fastboot flash dtbo dtbo.img
fastboot flash LOGO LOGO.img
fastboot flash modem modem.img
fastboot flash oem_stanvbk oem_stanvbk.img
fastboot flash qupfw qupfw.img
fastboot flash storsec storsec.img
fastboot flash multiimgoem multiimgoem.img
fastboot flash uefisecapp uefisecapp.img
fastboot flash recovery recovery.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
fastboot flash opproduct opproduct.img
fastboot reboot fastboot
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot reboot
REMEMBER
"Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
If the device automatically reboot in Stock Recovery mode don't reboot it and wait the flash end.
These ROMs can't be used to update or downgrade your phone but just to restore your phone.
If the rom seems doesn't start go in recovery stock and follow this guideline: English -> Wipe data and cache -> Erase everything.
If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide
If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/
If you got some problems like write error or no partition, check this: https://forum.xda-developers.com/showpost.php?p=76658555&postcount=34
DONATE LINK
If you want to support this and others my projects please consider making a donation, thanks.
Branded devices is for example a Chinese version with HydrogenOS to which OxigenOS has been installed? If so, how can a branded device be recovered?
Thanks
Hi guys, i'm here again to ask for your support, actually with android 10 Google introduced a lot of changing, from dynamic partitions to the new keymaster 4 encryption/decryption. Teamwin is working hard to update TWRP but they will still take some time. Currently some things already work but there are difficulties in bringing them to the OnePlus 8/8 Pro, for example decryption already works but creates some problems on the OnePlus devices. That's why I decided to create a Paypal moneybox to be able to bring you the latest updates in the shortest time possible. As I have previously done, I assure you of a support of at least 2 years (within the limits of my possibilities). In addition to the TWRP I will improve the fastboot roms and add OnePlus 8/8 Pro to my TOOL ALL IN ONE (and maybe I will also bring the RevengeOS). By getting hold of a OnePlus 8 or 8 Pro I will also be able to improve the TWRP for OnePlus 7T and 7T Pro.
OnePlus 8/8 Pro PayPal MoneyBox: https://www.paypal.com/pools/c/8pfrIOL3Qa
If you are unable to participate in the PayPal moneybox, you can make a normal donation (perhaps specifying that it is for the moneybox), however all private donations that I will receive for this or other projects will be included in the moneybox.
Private PayPal Donations: https://www.paypal.me/MauronofrioTool
Why after flash it, it boot up to Qualcomm crashdump mode and how to fix?
sakun-ice said:
Branded devices is for example a Chinese version with HydrogenOS to which OxigenOS has been installed? If so, how can a branded device be recovered?
Thanks
Click to expand...
Click to collapse
I think unbranded devices mean the device bought from T-Mobile or Verizon. Nothing to do with chinese versiion flash oxygenOS, if I'm not wrong.
Can't seem to get this to work. I'm trying to flash a stock rom for my OnePlus 8 after bricking it during a rooting process.
The device' bootloader is obviously unlocked and i can get the phone into Fastboot mode and connected to my PC.
The only issue is when i execute the flash-all.bat file, it can't seem to flash any of the files and gives an error consisting of the message "FAILED (remote: 'Flashing is not allowed for Critical Partitions').
What to do guys? Can anyone help me out.
Does anyone know where to find mobile oneplus 8 5g tmobile from mine is bricked I had same error as post above
KJStar said:
Can't seem to get this to work. I'm trying to flash a stock rom for my OnePlus 8 after bricking it during a rooting process.
The device' bootloader is obviously unlocked and i can get the phone into Fastboot mode and connected to my PC.
The only issue is when i execute the flash-all.bat file, it can't seem to flash any of the files and gives an error consisting of the message "FAILED (remote: 'Flashing is not allowed for Critical Partitions').
What to do guys? Can anyone help me out.
Click to expand...
Click to collapse
Try to flash fastboot rom with "tool all in one),It worked for me.
I needed modem I forgot to fastboot reboot fastboot guy in post 6 that's all you need to do is reboot fastboot then flash all I was looking for different file
Never mind I fixed it by downloading ota and going to system updates in settings because fastboot won't flash to modem right
I am having issues flashing. flashing not allowed on critical partition. please help I tried to use the large address aware program but nothing has changed.
bluemoel said:
I am having issues flashing. flashing not allowed on critical partition. please help I tried to use the large address aware program but nothing has changed.
Click to expand...
Click to collapse
Make sure your on the latest update: 10.5.8
mauronofrio said:
Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus 8 in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus 8 to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
DOWNLOAD
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus 8
BRANDED PHONE
For now branded device are not supported
MANUAL FLASH: Windows - OSX - Linux
If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here
Is reccomended to format data or the rom cannot boot:
Code:
fastboot -w
Others Commands to flash a fastboot rom
Code:
fastboot flash aop aop.img
fastboot flash bluetooth bluetooth.img
fastboot flash boot boot.img
fastboot flash dsp dsp.img
fastboot flash dtbo dtbo.img
fastboot flash LOGO LOGO.img
fastboot flash modem modem.img
fastboot flash oem_stanvbk oem_stanvbk.img
fastboot flash qupfw qupfw.img
fastboot flash storsec storsec.img
fastboot flash multiimgoem multiimgoem.img
fastboot flash uefisecapp uefisecapp.img
fastboot flash recovery recovery.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
fastboot flash opproduct opproduct.img
fastboot reboot fastboot
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot reboot
REMEMBER
"Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
If the device automatically reboot in Stock Recovery mode don't reboot it and wait the flash end.
These ROMs can't be used to update or downgrade your phone but just to restore your phone.
If the rom seems doesn't start go in recovery stock and follow this guideline: English -> Wipe data and cache -> Erase everything.
If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide
If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/
If you got some problems like write error or no partition, check this: https://forum.xda-developers.com/showpost.php?p=76658555&postcount=34
DONATE LINK
If you want to support this and others my projects please consider making a donation, thanks.
Click to expand...
Click to collapse
Hi, do you know if patching with local update a Oxygen OS Europe release from a Global release may cause problems to the fingerprint? I have a IN2010 with the Global OxygenOS but I would like to switch to the European versione becasue I live in Italy like you
Why not flash reserve.img?
nnyd said:
Why not flash reserve.img?
Click to expand...
Click to collapse
Because it is placed in userdata and not in a dedicated partition
I have an issue trying to flash on fastboot. It's says I can't flash on critical partitions. Yes I know alot of people are saying that but what I haven't seen is this:
This is my problem:
Fastboot get device-info
(Bootloader) device unlocked:true
(Bootloader) device critical unlock: false
(Bootloader) charger screen enabled: true
I have already tried "fastboot flashing unlock_critical"
It says bootloader already unlocked. I then re lock bootloader which I know is not a good idea( reflash stock with msm tool) and it lock then I try unlock critical command again and it still says device critical unlock: false
i need help please ..
i tried this method not the latest version i tried the 10.5.4 global
so it gave me all failed and error to foramt and others
then it restart my phone to show me crashdump
what should i do ?
should i use latest version ?
i hope you replay fast .. thank you
Alucardo1 said:
i tried this method not the latest version i tried the 10.5.4 global
so it gave me all failed and error to foramt and others
then it restart my phone to show me crashdump
what should i do ?
should i use latest version ?
i hope you replay fast .. thank you
Click to expand...
Click to collapse
Try again with 10.5.7. When it reboot to recovery, let it continue to run till it reboots on its own.
Unbrick from fastboot method
I hope I can help someone since I spent the whole night trying various methods to unbrick my Oneplus 8 and only this one worked for me JUST FOR INTERNATIONAL VERSION
You must have the drivers installed (Adb & Fastboot)
You must have your phone with the bootloader unlocked
1.- Download the file
2.-Unzip it
inside you will find Flash-all.bat
3.-Enter Fastboot mode
4.-Double click on the Flash-all.bat command
5.-It will direct you to the recovery, select the English language and restart in fastboot mode so that the process continues, wait for it to finish flashing everything and ready, the phone restarts on the latest version
https://mega.nz/folder/8tpUSSrR#7wH4NX_ccr2a6Ub8LXpsEA
Donate Link to support my work
https://paypal.me/pakomorales?locale.x=es_XC
cannot relock bootloader on oneplus 8
bro thanks for fastboot room for oneplus 8,i flash your fastboot room 10.5.9 everthing ok,but i relocked to boot loader it the phone be correpted. what should i do ,
please help me.
Got this working with Lineage ok but decided to go back to stock. I downloaded the stock recovery rom from NV and set everything up. Inside the recovery bundle is a bat file. Usually I would flash all files manually but this time I used the bat file. It manged the first 3 or 4 commands then came up with error. The box is now stuck in a boot loop and I am unable to access over adb.
Can anyone please suggest a way around this.
Thanks
Here is the bat file
fastboot flash staging blob
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash dtb mdarcy.dtb.img
fastboot flash vbmeta vbmeta.img
fastboot oem lock (optional step: required for certain functionality)
fastboot reboot
EDIT:
Eventually managed to flash lineage zip again. Used USB keyboard to access recovery
may i ask, what kind of keyboard did u use?
thanks in advance