Hi
I have a legend Chinese smart watch and I want a custom ROM for it.
Hrishabh2005 said:
Hi
I have a legend Chinese smart watch and I want a custom ROM for it.
Click to expand...
Click to collapse
I can't tell if you're being sarcastic or not. Is legend the name of the brand, or is it a generic damned chinese smartwatch like the DZ09 or the GT08?
It is the name of the brand and looks like dz09 but not sure
Hrishabh2005 said:
It is the name of the brand and looks like dz09 but not sure
Click to expand...
Click to collapse
If it has the mtk6260/6261 chipset, you can try one of the many roms from here that suit you (the list hasn't been compiled by me, I found it on the dz09 thread on xda). Some cause inverted screens, inverted touch axes or no display/sound or nothing at all, but you can again flash it with another firmware with spflashtool.
Or you could try searching on needrom or similar sites, like this or this.
Make sure to make a backup of the original firmware. Happy flashing!:good:
Related
Hi all..!
I need Chinese Rom for my Trinity device.But i can't found it
Anyone can help me ?
Thanks so much
One website has chinese rom before.....
but don't know why the website is down now.........
I also want Chinese rom too...
kayzee said:
One website has chinese rom before.....
but don't know why the website is down now.........
I also want Chinese rom too...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=1415421&postcount=13
go to http://www.ooppc.com/
there are tons of chinese rom there.
if you can read chinese. xD
zercy1346 said:
go to http://www.ooppc.com/
there are tons of chinese rom there.
if you can read chinese. xD
Click to expand...
Click to collapse
It`s right, now has a new rom for test(20270) will coming soon~
Boyvn said:
Hi all..!
I need Chinese Rom for my Trinity device.But i can't found it
Anyone can help me ?
Thanks so much
Click to expand...
Click to collapse
Really depends what do you mean by "Trinity Chinese"
If you want a pure Chinese Trinity ROM, you should visit a Chinese site and pick a right type of Chinese.
If you want an English ROM but capable to display Chinese without add-on program, then you come to the right forum. Yaka's ROM can display both types of Chinese, Japanese and Korean plus some others.
Hello everyone,
I am living in Hongkong, and i just bought a Touch pro2 from SGP, so far everthing is fine, beside i can not find any chinese input, i used to use "ChangJie" and "Quick" input.
also do you think i can download the offical eng rom from HTC? and flash it?
any risk if i flash the TP2 rom by myself?
tks
micmicsa said:
Hello everyone,
I am living in Hongkong, and i just bought a Touch pro2 from SGP, so far everthing is fine, beside i can not find any chinese input, i used to use "ChangJie" and "Quick" input.
also do you think i can download the offical eng rom from HTC? and flash it?
any risk if i flash the TP2 rom by myself?
tks
Click to expand...
Click to collapse
Yes, Unlock and Load baby
Moved to Software Sub Forum.
With regards to ROM flashing, see this thread : http://forum.xda-developers.com/showthread.php?t=550540
I don't know anything about Chinese iinput though, sorry .
Dave
micmicsa said:
Hello everyone,
I am living in Hongkong, and i just bought a Touch pro2 from SGP, so far everthing is fine, beside i can not find any chinese input, i used to use "ChangJie" and "Quick" input.
also do you think i can download the offical eng rom from HTC? and flash it?
any risk if i flash the TP2 rom by myself?
tks
Click to expand...
Click to collapse
Use A4 for input. I use MSYH6.0 for display but the cab is too big to be attached.
Leechoonhwee said:
Use A4 for input. I use MSYH6.0 for display but the cab is too big to be attached.
Click to expand...
Click to collapse
hello Lee,
does A4 input supporting "Quick"? and i heard from other forum that A4 does not suppport the physical keyboard, it that ture?
tks
mic
You can also try CE-Star Suite 2.8R3 or Studio KUMA
Had you bought TP2 in HKG, it would have come with Chinese support (I think it comes with "CangJie" among other inputs but I don't use it)
Hi all
i saw in Dubai the HTC Hero Chines mobile copy past from the orignal, so im planing to buy but first i want ask about it if ther is any Cooked rom can install it??
Waiting for reply
MD LUFFY said:
Hi all
i saw in Dubai the HTC Hero Chines mobile copy past from the orignal, so im planing to buy but first i want ask about it if ther is any Cooked rom can install it??
Waiting for reply
Click to expand...
Click to collapse
No Bro, Probably Not Because Chinese mobiles hardly support Java so, it might be no you can not customize it ... Cant install themes , cant install Apps I am living in Tianjin/China ..
Chinese Mobiles are just piece of crap nothing else
maheshpatel said:
No Bro, Probably Not Because Chinese mobiles hardly support Java so, it might be no you can not customize it ... Cant install themes , cant install Apps I am living in Tianjin/China ..
Chinese Mobiles are just piece of crap nothing else
Click to expand...
Click to collapse
hahaha im with you Bro but ther is some Peple thy ask me to bring for them thy like it for me nothing like the orignal, orignal always the best
many thanx bro
where i can fine rom for this watch?
I break my smartwatch with the incorrect rom.
I need please the original
Anyone send me the rom???
mtk 6261da
u8 plus
Try this. You should of back up your firmware before you flash
AerogamingHD said:
Try this. You should of back up your firmware before you flash
Click to expand...
Click to collapse
sorry dont work
AerogamingHD said:
Try this. You should of back up your firmware before you flash
Click to expand...
Click to collapse
I have GT08 clone watch and your firmware i can flash to my watch but dont work touchscreen.
It will start, show the home screen and lockcreen button is working too but the touch screen do nothing. :crying::crying::crying:
Golem_s DZ-09 Firmwares arent not good for GT08, because the screen on this watches is mirrored, camera is upside-down ,...
touchscreen
AerogamingHD said:
Try this. You should of back up your firmware before you flash
Click to expand...
Click to collapse
touchscreen doesnt work
bjoesoft said:
touchscreen doesnt work
Click to expand...
Click to collapse
cmike32 said:
I have GT08 clone watch and your firmware i can flash to my watch but dont work touchscreen.
It will start, show the home screen and lockcreen button is working too but the touch screen do nothing. :crying::crying::crying:
Golem_s DZ-09 Firmwares arent not good for GT08, because the screen on this watches is mirrored, camera is upside-down ,...
Click to expand...
Click to collapse
The problem is its a clone. It isn't official that means that the watch has some random clone firmware which no body really knows whats on it.
The screen dose'nt work because the touchscreen is incompatible with the firmware. The only thing you guys could do is keep searching for GT08 32MB firmwares and keep flashing until you find the one for your watch
Also Where did you buy the watch?
I was buy this smartwatch on Aliexpress.com.
My problem is solved. :victory:
Solution :
I find ROM on 4DA russian forum of my GT08 clone (MTK61D_btdialer_11c) and i flash (FlashTool_v5.1420.00 Azeem) it and everything works.
Then I have a problem with Invalid IMEI.
I was use SN write tool and bplgu file from Golem_s firmwares of GT08 (MT6260) and i writen to the watch a correct IMEI number.
Now is my smartwatch like a new and everything is OK.
Big thanks to Golem_ and AerogamingHD.
Yay
cmike32 said:
I was buy this smartwatch on Aliexpress.com.
My problem is solved. :victory:
Solution :
I find ROM on 4DA russian forum of my GT08 clone (MTK61D_btdialer_11c) and i flash (FlashTool_v5.1420.00 Azeem) it and everything works.
Then I have a problem with Invalid IMEI.
I was use SN write tool and bplgu file from Golem_s firmwares of GT08 (MT6260) and i writen to the watch a correct IMEI number.
Now is my smartwatch like a new and everything is OK.
Big thanks to Golem_ and AerogamingHD.
Click to expand...
Click to collapse
cmike32 said:
I was buy this smartwatch on Aliexpress.com.
My problem is solved. :victory:
Solution :
I find ROM on 4DA russian forum of my GT08 clone (MTK61D_btdialer_11c) and i flash (FlashTool_v5.1420.00 Azeem) it and everything works.
Then I have a problem with Invalid IMEI.
I was use SN write tool and bplgu file from Golem_s firmwares of GT08 (MT6260) and i writen to the watch a correct IMEI number.
Now is my smartwatch like a new and everything is OK.
Big thanks to Golem_ and AerogamingHD.
Click to expand...
Click to collapse
Hi bro
What is the difference between the original firmware come in your watch and the new one which you flash.
Did you get any new options in your watch?
Did you add any new watch faces ?
Share us your experience with your watch
Add photos if possible.
Thanks and good luck
super leb said:
Hi bro
What is the difference between the original firmware come in your watch and the new one which you flash.
Did you get any new options in your watch?
Did you add any new watch faces ?
Share us your experience with your watch
Add photos if possible.
Thanks and good luck
Click to expand...
Click to collapse
It is just original firmware, but it is work good. It is the same like it was in watches when i bought it.
No new options, no new faces...
visit needrom.com/download/u8-modificated-firmware
/
nf1974 said:
where i can fine rom for this watch?
I break my smartwatch with the incorrect rom.
I need please the original
Anyone send me the rom???
mtk 6261da
u8 plus
Click to expand...
Click to collapse
try needrom.com for the u8 working rom ....
AerogamingHD said:
Try this. You should of back up your firmware before you flash
Click to expand...
Click to collapse
Hi, I am facing a similar problem with my gt08. its a mtk6261DA, 32mb winbond rom. i have tried all the roms posted here and on the google drive. i still couldnt find one that works for me.
I have these problems when i flash with 32mb firmware:
1. the display has inverted colors like a photo negative.
or 2. the touch doesnt work
0r 3. the touch is inverted
or 4. the screen is inverted but touch doesnt work.
or 5. the screen is inverted in colors and shifted a bit up from bottom which looks like a broken display with vertical lines.
or 6. in some cases it may be the combination of two or three of the things listed above
i just got these watches a dz09 and a gt08 both have the same board and specs.. i even verified it by opening them. but unfortunately and stupidly i didnt take a back up of the firmware and because of my bad luck i couldnt find any firmware working with that. can you help me? i saw ur firmwares on the drives.. i hope you or someone can help me thanks.
I no long have this watch.so I no longer now
even if you had a backup you cannot reflash it because on these fake watches there is no space allocated for installing anythink even 1mb of data.
Could someone find a way to put wear os on mi watch global?? The base software isn't useful/can't install my own apps
Its not possible unfortunately. Even if someone did find a way, the actual SoC is pretty weak and it doesn't have enough ram to run wearos even in theory.
if it may interest you after some research I saw that the Chinese version of the watch allowed the installation of the application and I also found a tutorial to switch from a global version to a Chinese version then another tutorial to add gapps on it with a little bit of file manipulation
I have not tested yet because I receive the watch in a few days
https://www.reddit.com/r/Xiaomi_Mi_Watch/comments/e6ga4q
[MOD] Convert your Chinese Wear OS to Global Wear OS
If you bought your Android Wear devices in China, and decided to install Google on it without actually installing Global ROM, you are in the right place. This tool lets you convert your Chinese Wear OS ROM to a "Global ROM". It works by deleting...
forum.xda-developers.com
I also forgot to specify that the majority of xiaomi products offer the English language on the Chinese version so there will only be the configuration which will be complicated once this step is over you will be easy I don't think I'm too wrong in saying that.
Pikatsuto said:
if it may interest you after some research I saw that the Chinese version of the watch allowed the installation of the application and I also found a tutorial to switch from a global version to a Chinese version then another tutorial to add gapps on it with a little bit of file manipulation
I have not tested yet because I receive the watch in a few days
https://www.reddit.com/r/Xiaomi_Mi_Watch/comments/e6ga4q
[MOD] Convert your Chinese Wear OS to Global Wear OS
If you bought your Android Wear devices in China, and decided to install Google on it without actually installing Global ROM, you are in the right place. This tool lets you convert your Chinese Wear OS ROM to a "Global ROM". It works by deleting...
forum.xda-developers.com
Click to expand...
Click to collapse
If I will mess something is there way to bring it back to global version?
Winiary said:
If I will mess something is there way to bring it back to global version?
Click to expand...
Click to collapse
honestly I can't tell you because I made the choice not to do it on my watch. you should know that when you make changes it's a risk to take. After doing some research I think you can find it. I couldn't find any, but I only did a search or two. and I think you will find answers more easily than me because you are English. I am French, so the content of help sites on this kind of subject is less well provided for me
Pikatsuto said:
honestly I can't tell you because I made the choice not to do it on my watch. you should know that when you make changes it's a risk to take. After doing some research I think you can find it. I couldn't find any, but I only did a search or two. and I think you will find answers more easily than me because you are English. I am French, so the content of help sites on this kind of subject is less well provided for me
Click to expand...
Click to collapse
actually im from poland
I also think that,iit is not possible unfortunately but this one. Even if someone did find a way, the actual SoC is pretty weak and it doesn't have enough ram to run wearos even in theory.
i am using xm129 version i want to revert back to xm128 version, is there any method to do that