My x722 has a boot loop, and I had not enabled usb debugging on it, now or the pc does not recognize, there is some way to solve
I had that Problem, too!
But I got it back going!
First, try to get into twrp again and re-flash your Rom+ Gapps.
If you have any other working ROM on your internal memory, you better flash that one!
If both is not available, conneect your leeco via USB to another phone and there, activate Media Transfer! On the other phone, you should See your Lex722 and can now send Files to it. Just replace your Pc with another Android. For me, that worked to get it going after hard brick. Was not recognized by PC and booted only into fastboot. Data were formatted...
Related
I have installed a nightly update for Cyanogen 7 and since then the phone is stuck on the Cyanogen logo.
I can get into recovery but since I don't have any firmware files on my SD I can't reinstall the ROM. I just need a way to put the files on my internal SD.
I have tries ADB which didn't detect my phone. I have installed the driver (The phone is found as the Nexus S for some reason) .
I also couldn't get into download mode although I don't have the hardware lock as I can get into recovery.
What can I do in this situation? I am already thinking of opening the phone, swapping out the internal SD and transferring the files through the computer. I would like to know if there's any other way.
Thank you!
romitkin said:
I have installed a nightly update for Cyanogen 7 and since then the phone is stuck on the Cyanogen logo.
I can get into recovery but since I don't have any firmware files on my SD I can't reinstall the ROM. I just need a way to put the files on my internal SD.
I have tries ADB which didn't detect my phone. I have installed the driver (The phone is found as the Nexus S for some reason) .
I also couldn't get into download mode although I don't have the hardware lock as I can get into recovery.
What can I do in this situation? I am already thinking of opening the phone, swapping out the internal SD and transferring the files through the computer. I would like to know if there's any other way.
Thank you!
Click to expand...
Click to collapse
Plug phone into computer and boot in recovery. If still not recognized by adb go to advanced and select reboot recovery. This should get you adb. ADB push "namehere".zip sdcard.
If still having problems Odin back to stock and start over. To get to download mode make sure phone is off, battery pull if necessary. Plug USB to phone press volume up and down and hold and plug USB into computer.
Sent from my GT-I9000 using XDA Premium App
Awesome! Thanks to you I have managed to get into download mode now.
All the guides that I found says I should use the power button. You said only up and down while connecting. That worked.
I am very grateful.
Hi there,
So I did something really stupid and I wiped my phone while in recover mode trying to install a new ROM. And now I'm stuck with a useless phone that can only go into TWRP and Firmware Update Mode.
I've tried every method to unbrick my phone, and have a previous thread on this forum trying to get help (http://forum.xda-developers.com/showthread.php?p=48914581#post48914581), but nothing is working.
My question now is I'm running TWRP 6.3.2.2, If I buy a USB OTG cable and put my rom files on a USB thumbdrive, can I then install the rom from the usb? If so, where in the filesystem does this usb storage show up?
BraydenJW said:
Hi there,
So I did something really stupid and I wiped my phone while in recover mode trying to install a new ROM. And now I'm stuck with a useless phone that can only go into TWRP and Firmware Update Mode.
I've tried every method to unbrick my phone, and have a previous thread on this forum trying to get help (http://forum.xda-developers.com/showthread.php?p=48914581#post48914581), but nothing is working.
My question now is I'm running TWRP 6.3.2.2, If I buy a USB OTG cable and put my rom files on a USB thumbdrive, can I then install the rom from the usb? If so, where in the filesystem does this usb storage show up?
Click to expand...
Click to collapse
I believe only TWRP 2.6.3.4 can support OTG (I've been happy with it).
I think you may have to ADB push the files from PC over while in recovery (may need to look around).
I have a dilemma. This morning my usb was working fine but I needed to get back to stock and unrooted. I flashed the system.img from the NDR90X factory image and wiped my data (not userdata however because I didn't want to lose everything) the phone booted up just fine and operates fine, other then it doesn't mount on my pc anymore. fastboot and adb do not work for me either. I tried mounting on both windows and linux, I tried using another computer, and I have tried mounting through the recovery. none of these have worked. I cant try going back to complete stock because fastboot is not recognizing the device either. the phone still charges fine with no problems. But I still am getting the feeling that maybe the usb port has malfunction. I was hoping that maybe someone could help me with this problem and reaching a solution. I don't know if I can contact google about this problem because my device cannot be returned to completely stock.
I forgot to mention that after flashing the stock system.img I also flashed TWRP, and since then I am back on a custom rom to see if maybe that would fix my problem. However it still persists.
I have uploaded a picture showing what error message I am getting on windows.
Reinstall the USB drivers
hd-renegade said:
Reinstall the USB drivers
Click to expand...
Click to collapse
Turns out it was the USB that doesn't work. When I got home I tried another USB that I have and it works fine.
Sent from my AOSP on angler using Tapatalk
i made the boneheaded mistake of deleting everything off my phone in twrp (3.2.1-0) and ive had little success in trying to recover it.
1. my pc will not recognize it when its plugged in, this was also an issue when it had an os on it. ive tried to install the google usb drivers as well as the hisuite drivers with no success
2. i bought a usb otg adapter so i could possibly push the new os through there but when ever i try i get 0mb when trying to select the storage in the mount section of twrp. ive also tried reformatting the usb multiple times but that didnt work either.
3. there is no connectivity while in fastboot as well as adb
I'm caught in a tight situation and don't have the means to buy a new phone if anyone could help me out i would greatly appreciate it
shpadza said:
i made the boneheaded mistake of deleting everything off my phone in twrp (3.2.1-0) and ive had little success in trying to recover it.
1. my pc will not recognize it when its plugged in, this was also an issue when it had an os on it. ive tried to install the google usb drivers as well as the hisuite drivers with no success
2. i bought a usb otg adapter so i could possibly push the new os through there but when ever i try i get 0mb when trying to select the storage in the mount section of twrp. ive also tried reformatting the usb multiple times but that didnt work either.
3. there is no connectivity while in fastboot as well as adb
I'm caught in a tight situation and don't have the means to buy a new phone if anyone could help me out i would greatly appreciate it
Click to expand...
Click to collapse
Powerdown your phone and boot to bootloader by pressing powerkey and holding vol- then connect to your computer you should see the Nexus 6p on your pc and. from your computer download any rom of your like,gapps,root optional and copy it to your internal storage. Then just flash.
Gearswar said:
Powerdown your phone and boot to bootloader by pressing powerkey and holding vol- then connect to your computer you should see the Nexus 6p on your pc and. from your computer download any rom of your like,gapps,root optional and copy it to your internal storage. Then just flash.
Click to expand...
Click to collapse
that doesnt work either. i have all of the appropriate drivers and still nothing.
That could be your pc. Try a different port or even better another pc.
My phone felt in the water yesterday and I think my usb port is broken now . Can't connect to pc via usb, adb doesn't recognize my device but fastboot and charging are working fine.
Before I knew that my usb port wasn't working, I decided to flash a new custom ROM (was in LineageOs and decided to try Havoc, android 10) so I formatted the data and lost everything. After formatting that I discovered that I couldn't connect to pc :/
So I went to fastboot and tried to flash Global stock rom and it didn't work. The process went smoothly, but when booting I got stuck in MIUI logo screen.
So I tried to boot with chinese rom and everything went well, but I still can't connect to pc to transfer files and I don't want to keep with MIUI.
Is it possible to flash a custom rom without wipping all my data? What are my options?
use ftp like filezilla to copy files
Try reinstalling the drivers, or use a different computer. If you don't have an other one and reinstalling does not fix it you could buy an usb-c otg adapter. For flashing the data partition has to be wiped prior to installing a rom so it's not possible to copy the files from the cloud.
I solved the problem by not formatting internal storage. Just installed Havoc and its working fine now.
But the problem probably lies in my usb port, as fast charging is not working anymore aswell