Related
Hello,
There have been a log of helpful posts on the forum about what you can do with the Amazon Fire TV, but they are all in separate threads. I create this thread to put all of those guides together, along with whatever tips/tricks you can do on the Fire TV. I will try to credit where I found all the information. If the mods can make this a sticky thread, it will be awesome. I will try to update it when I find new information.
1/ BASIC
First step is to allow ADB over internet. Go to Setting ---> System ---> Developter Options ---> ADB Debugging ON
Here are 2 commands that you will need for sideload all apps in FireTV
adb connect xxx.xxx.xxx.xxx
(xxx.xxx.xxx.xxx is your IP address. Go to Setting ---> System ---> About ---> Network to find it.
adb install name_of_your_apk
Remember when you use adb, try to be in the same folder where the apk is located, so you don't have to type in it path. Also, make sure there is no space in the name of the apk or the install command won't work. Please note that you can also sideload apps into Fire TV if you have an Android device (tablet, phone, whatever..) Install Terminal Emulator, type cd sdcard/Download to go the Download folder where all your downloads usually located.
Also, in this guide, there is a few part that I mention reboot the device. Either follow the reboot step, or manually press both the select and the play/pause button and your Fire TV will reboot.
2/ ROOT
taken from this thread (http://forum.xda-developers.com/showthread.php?t=2783805)
Go to: http://towelroot.com/ and click the red button to download the APK:
Download the Chainfire SU APK from the Playstore: http://apps.evozi.com/apk-downloader/?id=eu.chainfire.supersu
Sideload both APKs.
Run Towelroot, hit "Make it Rain" and then your FTV will reboot.
After reboot, open SuperSU, install SU. Go to Setting and set default access to "Grant" if you don't want the prompt to appear asking for superuser for each app.
Download Busybox APK: http://apps.evozi.com/apk-downloader/?id=stericson.busybox
Launch it and install busybox.
3/ DISABLE FIRE TV UPDATER
Type adb shell in your terminal
Type su to ask for root (a pop up will appear on your Fire TV asking for superuser if you did not set "Grant" as default)
Type pm disable com.amazon.dcp
4/ CONTROL AMAZON FIRE TV WITHOUT USING MOUSE/KEYBOARD
For certain apps to work in Fire TV, you might need a mouse/keyboard since the app is design for touch base environment. To work around this, what you can do is install a VNC server and control the Fire TV using VNC Viewer.
The VNC Server app that I used is called VMLite VNC Server. Here is its link in the Playstore:
https://play.google.com/store/apps/details?id=com.vmlite.vncserver&hl=en
I will not post the apk to this link since it is a paid app and the developer has specifically asked me not to. So to get the apk, there are 2 ways.
A) Go to the developer website and buy the apk: http://www.vmlite.com/purchase.html
B) Install the apk on your Android device from the Play store. Here is how you can download the apk from the Play Store using Chrome extension (this will only work if you have bought the apk from the Play store)
Go to http://apps.evozi.com/apk-downloader/ in Chrome and scroll down.
Install the APK Downloader v2.1.3 extension.
Once install, go to the extension setting, fill out all that information ( username, password, and Google ID)
Go to this link https://play.google.com/store/apps/details?id=com.vmlite.vncserver&hl=en
Click Install, choose your Android device, and a symbol will appear in the URL bar allowing you to download the apk
Once you have the apk, sideload it. Open the app, press the Menu button on your remote, a bottom bar will appear.
Select Setting ---> VNC password to set your VNC Server password
Select Setting ---> VNC port to set your VNC Server port
Select Setting ---> Autostart Server at boot
Then press the big Green Start Server button
EDIT: there are several VNC server available for Android. Some are paid, some are free. As long as it is working with a password, you should use it. You don't have to use VMLite VNC Server. I use it because I have it for a long time and it works great on all my Neuxs 7, 10, and 5.
Once done, you can use a VNC viewer to control your Fire TV.
For Android device, use this app https://play.google.com/store/apps/details?id=com.realvnc.viewer.android&hl=en
For iOS device use this app https://itunes.apple.com/us/app/vnc-viewer/id352019548?mt=8&ign-mpt=uo=4
For Desktop, go to this link and download the one for your OS https://www.realvnc.com/download/vnc/latest/
5/ INSTALL PLAY STORE
taken from this thread http://forum.xda-developers.com/showthread.php?t=2787813
Download and install the "Xposed Framework" http://dl-count.xposed.info/modules/de.robv.android.xposed.installer_v32_de4f0d.apk
Download and install the "HDXPosed.apk" file. http://forum.xda-developers.com/attachment.php?attachmentid=2538185&d=1390657381
Launch the "Xposed" application. Go to Framework and click Install. Don't reboot yet.
Go to modules and enable HDXPosed ( you need a mouse for this part or VNC server)
Go back to Framwork and click Reboot
Go download these apks
https://mega.co.nz/#F!8Q10yAiZ!4GVoGr7FJtXauVI3kvPSMQ
Mirror
https://onedrive.live.com/redir?res...4&authkey=!AIVXLFXAOWDeM0Q&ithint=folder,.apk
Sideload/Install all those apps (the apks for some of the apps contain space. Change the name or put the name in quotation mark to make it work)
Reboot. Play Store will appear in your application list.
WARNING: there is a bug in this step. For some people, first installation and reboot won't work. Don't panic. Sideload/Reinstall the app a second time will make it work, but use this command below
adb install -r name_of_your_apk
Remember to reboot your device.
6/ ENABLE INSTALLATION OF UNKNOWN SOURCES
taken from this thread http://forum.xda-developers.com/showthread.php?t=2784173
Install SQLite Editor https://code.google.com/p/xdroidx/downloads/detail?name=SQLite Editor-9.apk
Launch SQLite Editor, granting it SU access
Select "Settings Storage"
Select "settings.db"
Select the "global" table
Highlight the record "install_non_market_apps"
Hit the Menu button and select "Edit Record"
Change the Value to "1" and save the record (you will need a mouse/keyboard for this step)
Reboot
This is the only part in the guide that I have not tried yet. Some people say that by changing the internal database, you might mess up your Android device. I don't know this is true or not, but since I have not done it on any Android devices ever yet. I am still waiting for people result on this. The advantage of allowing installation of unknown sources is you can use ES File Explorer to install apps that are not in the Google Play store. No need to use adb to sideload apps and you don't have to open adb all the time, less vulnerability on your Fire TV.
7/ ACCESS YOUR AMAZON FIRE TV INTERNAL FILE STRUCTURE REMOTELY
If you choose to enable installation of unknown sources (the step above this), then you can use this step to install all apk from now on, without using adb ever again. There are two ways of doing this:
A) Install ES File Explorer from the Play Store or sideload it http://apps.evozi.com/apk-downloader/?id=com.estrongs.android.pop
Launch it. On the left side bar, select Remote Manager, select Turn On. Input the address on your PC and you can transfer any files from your PC to your Fire TV using WIFI. If you enable root in ES File Explorer, you can also copy/paste files from root but be careful about that.
B) Set up a SSH server.
Sideload SSH Daemon http://apps.evozi.com/apk-downloader/?id=web.oss.sshsftpDaemon
Configure password, and enable autostart on boot (this is the most frustrated part of the guide since the screen will be sideway. It might help if you have VNC server install since you can control it using VNC viewer)
SSH with username root and password abc123 (configurable in SSH Daemon)
You can also access the SSH server using ES File Explorer on your Android device. Select Network ---> FTP ---> New ----> choose SFTP ---> Username/Password
8/ ALTERNATIVE LAUNCHER FOR FIRE TV
Here is the link: https://github.com/Redth/FiredTVLauncher
Once install, when your press Home button, this launcher will launch instead of the default one.
Pros: since Amazon Fire TV won't show any apps that is not install from Amazon store. Using this launcher will display all your apps in normal Android device style. You can also rearrange them or show/hide certain apps.
Cons: lose the Amazon Fire TV default launcher. However, you can still access the default launcher, there is an icon to go back to the default launcher.
9/ INSTALL XBMC AND COPY OVER YOUR USERDATA FOLDER
Pretty self-explanatory, with XBMC, Amazon Fire TV turns into a "media box" beast that we all want.
Install from here (select ARM download link please) http://xbmc.org/download/
Launch XBMC. Exit. Then copy over all your userdata/addons folder.
If you have XBMC install on any other platforms and want to copy all of your settings/addons over to Fire TV, please remember that the best skin for Fire TV is Confluence. If you are using a touch-based skin, please switch it to Confluence or similar non-touch based skin.
This link tells where the default userdata folder is located:
http://wiki.xbmc.org/?title=Userdata
This is where you will place your userdata folder on your Fire TV
/sdcard/Android/data/org.xbmc.xbmc/files/.xbmc/
Please remember that this method works for all platform, if you are using XBMC on Windows, iOS, etc... you can just copy everything over and it will work.
Example:
I can copy over my userdata and addons folder from my Nexus 10. It is located at
/sdcard/Android/data/org.xbmc.xbmc/files/.xbmc/addons/
/sdcard/Android/data/org.xbmc.xbmc/files/.xbmc/userdata/
Then I paste them to Fire TV here and replace the original folder
/sdcard/Android/data/org.xbmc.xbmc/files/.xbmc/
Please remember to never copy over the temp folder. It might mess up your XBMC on Fire TV. If you do that, just delete it and launch XBMC.
10/ PLAY ANY VIDEO ON THE INTERNET USING CLOUDCAST ON ANOTHER ANDROID DEVICE
Install Cloudcast (it won't appear in Google Play store due to device restriction)
Download apkhere
http://apps.evozi.com/apk-downloader/?id=com.appestry.cloudcast
Once install, you need to buy the in-app purchase (price is only $1.60, support the developer) to watch video longer than 10 minutes. The in-app purchase is authenticated through Google Play Store so only need to buy it once.
Once you have buy the in app purchase. Go to your other Android device, go to Play store and install the Cloudcast app in your other Android device
With both Fire TV and your Android device has Cloudcast, go to Devices --> Pair a new devices to link them up. From now on, any video you watch on your Android devices can be cast to the Fire TV. This app is based on Chromecast and it works great for me.
Here is a video of the developer explaining how his app work
https://www.youtube.com/watch?v=1ftqC1NvTPw
11/ OTHER LINKS AND THREADS
Spark : Desktop mirroring and web casting apps
http://forum.xda-developers.com/showthread.php?t=2766019
The Spark app is a hit/miss for me. It has a Chrome extension that will cast your Chrome tab to the Fire TV screen. Also, it has a Window/Mac program that supposedly mirror your entire desktop screen to the Fire TV. From my experience, the Chrome extension works for me in some way. The Chrome tab will appear in the Fire TV but it is not true mirroring. Certain videos won't load and the lag timing is around 3-5 seconds. The Window desktop program did not work for me. It will give me a black screen. If I play a video, sound will come out of the TV but no picture/image showing up. You can try it and let me know.
Airplay fully working and Mirroring too.. AndroidApple Tv allinOne
http://forum.xda-developers.com/showthread.php?t=2764848
Airplay to Fire TV. Did not try it since I don't have an iOS devices.
Working Sideloaded APK List - Updated Daily
http://forum.xda-developers.com/showthread.php?t=2756608
Self explanatory. Very good list of what app works on Fire TV and what not.
Links for Viki, Cruncyroll and Drama Fever for Google TV
http://www.4shared.com/zip/RlFwc6Ixce/gtv_apks.html
Dropbox Mirror:
https://www.dropbox.com/s/acilpqm3qbtub8v/gtv_apks.zip
The Google TV version of Viki, Crunchyroll and Drama Fever. Only Viki and Drama Fever works for me. Crunchyroll gives you a sideway screen. Please install the Google Play version below:
http://apps.evozi.com/apk-downloader/?id=com.crunchyroll.crunchyroid
Links for Dolphin Browser and Flash
http://forum.xda-developers.com/showthread.php?t=2267390
The thread above contains link to Dolphin browser which support Flash. You can also install Dolphin Jetpack (link below, which supposedly makes your Dolphin browser experience even faster. Warning: need mouse to navigate browser, remote control alone is not enough.
http://apps.evozi.com/apk-downloader/?id=com.dolphin.browser.engine
Good stuff. Thanks.
There is a method in another topic that makes it easier to sideload apps while no longer needing a PC after installing certain apps.
Could you change the ADB part to tell people to sideload "terminal emulator" and a file explorer for easily sideloading any apk without a PC/straight from FTV storage then deleting the apk file,and a recommended web browser for downloading apk files to sideload via terminal emulator?
I got Opera as my first browser to sideload when it was a 21.x version and it ran decently,but the recent 22.x updates are unstable with flickering rendering.
If you pick Opera,I suggest you try and find a 21.x version from somewhere like Aptoide.
Just want to help make it easier when you can install apps without needing a PC after the first few sideloaded apps.
You have apps from 1Mobile,Appchina,Wandoujia,SlideME,Aptoide
(after sideloading Aptoide Market app from m.aptoide page),Voga360,and the free apps from Play Store via Evozi and APK Leecher.
All of these can be accessible from a sideloaded browser on your Fire TV for sideloading with the Terminal Emulator after finding out the name and directory (usually sdcard/Download/appname.apk) using a file explorer like ES File Explorer.
Yea, I am going to write more sideloading browsers and other apps. There are several methods for installing apk on the Fire TV once it is rooted. Using browser to download, then use ES File Explorer to install, or terminal emulator to install is fine also.
For the browser part, so far, I had installed a modified version of Dolphin browser that support Flash. It works great but you need a mouse to move around. I will add more stuff or link to other threads that contain useful info later on.
retroben said:
There is a method in another topic that makes it easier to sideload apps while no longer needing a PC after installing certain apps.
Could you change the ADB part to tell people to sideload "terminal emulator" and a file explorer for easily sideloading any apk without a PC/straight from FTV storage then deleting the apk file,and a recommended web browser for downloading apk files to sideload via terminal emulator?
I got Opera as my first browser to sideload when it was a 21.x version and it ran decently,but the recent 22.x updates are unstable with flickering rendering.
If you pick Opera,I suggest you try and find a 21.x version from somewhere like Aptoide.
Just want to help make it easier when you can install apps without needing a PC after the first few sideloaded apps.
You have apps from 1Mobile,Appchina,Wandoujia,SlideME,Aptoide
(after sideloading Aptoide Market app from m.aptoide page),Voga360,and the free apps from Play Store via Evozi and APK Leecher.
All of these can be accessible from a sideloaded browser on your Fire TV for sideloading with the Terminal Emulator after finding out the name and directory (usually sdcard/Download/appname.apk) using a file explorer like ES File Explorer.
Click to expand...
Click to collapse
cloudcast
i see cloudcast here
https://play.google.com/store/apps/details?id=com.appestry.cloudcast&hl=en
Has any one found a good alternative to VMLite VNC Server? I would like a free one or maybe one that does give you some trial period, I don't mind paying for it if it work but I'm not sure that I will work for what I'm trying to do.
I got terminal emulator working. All you need to do is change settings so that it uses word keyboard. Then, when you wanna type something, hit the 3 bars key. Then click 'toggle soft keyboard'.
cloning firestick
I am trying to take my "jailbroken" Firestick and copy it's info to a new firestick. So I will have two that have kodi and I can use one downstairs, I thought I could just back it up on perhaps my desktop and than restore on the new stick. Is this going to work or will I just crash the new one. Any suggestions would be greatly appreciated. I am good with my comp, but can't write code or anything like that. Thanks!
kimoleary3 said:
I am trying to take my "jailbroken" Firestick and copy it's info to a new firestick. So I will have two that have kodi and I can use one downstairs, I thought I could just back it up on perhaps my desktop and than restore on the new stick. Is this going to work or will I just crash the new one. Any suggestions would be greatly appreciated. I am good with my comp, but can't write code or anything like that. Thanks!
Click to expand...
Click to collapse
It won't work mate, the only way to root is to solder mod it for root, think there is a guide on xda or aftv news or Google it? A soft mod root is not possible anymore
Sent from my SM-G900F using Tapatalk
Hello,
I want to remotely access an amazon fireTV from my PC. I try with TeamviewerQS but, 1) I cannot take control of the desktop of the FireTV to make changes. 2) I always need permission from the remote which is very complicated. Is there a way to use a different program to do this easier? Maybe I can pre-install the correct programs into all of the FireTV's before I ship them out? Please help. JR
I'm0.
Here's how to disable the most troublesome system apps and services.
I use the pm disable command throughout, but unless otherwise noted OS 4 can use "pm block"
To re-enable an app, run the same command replacing "disable" with "enable" (or block with unblock)
See end of post about how to run the commands.
OTA updatesRooted
OS4
pm block com.amazon.otaverifier
Rename /system/priv-app/DeviceSoftwareOTA.apk to DeviceSoftware OTA.apk_
0S5
pm disable com.amazon.otaverifier
Rename /system/priv-app/DeviceSoftwareOTA/DeviceSoftwareOTA.apk to DeviceSoftware OTA.apk_
Unrooted
Run these with: adb shell pm . . .
OS4
pm block com.amazon.otaverifier
pm block com.amazon.dcp
OS5 (below 5.1.1)
pm hide com.amazon.otaverifier
pm hide com.amazon.device.software.ota
OS5 (5.1.1 and above) - OTA can't be prevented on unrooted devices at this timeAmazon launcher
> "pm disable" (or block) the stock launcher to make your custom launcher the default (credit: Powerpoint45).
> "am start" the stock launcher (after re-enabling) to run the Amazon UI.
. . See bibikalka's post about using enable and start in a script to switch launchers with one tap.OS 4 - pm block com.amazon.kindle.otter
am start -n com.amazon.kindle.otter/com.amazon.kindle.otter.Launcher
OS 5 thru July 2015 - pm disable com.android.launcher
am start -n com.android.launcher/com.android.launcher2.Launcher
OS 5 Sept. 2015 and later - pm disable com.amazon.firelauncher
am start -n com.amazon.firelauncher/.LauncherAmazon appstore
> Stop the prompt to open appstore when you press an in-app link to Play Store.
. . Handy in scripts with the launcher commands. Reminder: When disabled, the system sees the Appstore as uninstalled.
. . > Some apps (es file explorer) will prompt to delete data. Say no!
. . > If you try to open Appstore while disabled, the system throws a freak-out error. Just re-enable it.pm disable com.amazon.veneziaLockscreen ads
> Replace lockscreen ads with Amazon's stock wallpapers. OS 5
pm disable com.amazon.kindle.kso
OS 4
> Note: The OS 5 command may cause bootloop on tablets using Freetime.
. . JMZ's Fire tool makes perm changes and you get a message with each reboot. This command avoids both issues.
Code:
pm disable com.amazon.kindle.kso/com.amazon.kindle.kso.lockscreen.LockscreenUpdateService
Wifi off (or on)
> "Disable" (or "enable") is required in all versions.
> OS 4 note: Some apps may not run or could go wonky with wifi off; just re-enable if things get weird.svc wifi disable------------------------------------------------------------------
How to Run the Commands
The OTA verifier, stock launcher and appstore can be disabled/frozen with whatever app you use for that.
If you disable/enable regularly (to use the Appstore, for example), it's easier to do with scripts and launcher shortcuts.
From Fire HD:
Shortcut on launcher (fast and easy for any command) - See bibikalka's post for switching launchers and my post below it.
Terminal emulator app:
su
command
From computer:
GatesJunior's Debloater tool (fast and easy for OTA, launcher, appstore)
Manually with adb: Not all commands require root but most do, so . . .
adb shell
su
command
I was only able to pm enable/disable after going > adb shell > su, but it works. When I had it disabled I couldn't register the device with Amazon until I disabled it again. I'm working with Kindle Fire HD 6 Kids Edition Fire OS 5.2.2, HDXposed enabled, working GAPPS and rooted with Go Launcher EX launcher
---------- Post added at 06:10 PM ---------- Previous post was at 05:54 PM ----------
I did the pm disable com.amazon.venezia and went into Applications > ALL and the App Store (Amazon) didn't show up at all. I enabled it and it's there again. Just wanted to share since I want to use the Amazon App Store and know now that I have this option. I also disabled com.amazon.otaverifier and can use the App Store no problem. Thank you!
I'm running fire HD6 devpreview 5.2.0 +root
Disabled ota verifier
Renamed DevicesoftwareOTA.ask
Automatic update is disabled in Amazon app store.
Still they managed to send and install Washington post app in my device. it was not there earlier.
I'm doubt about how to prevent Amazon altering my device.
Sent from my KFARWI using Tapatalk
llranga said:
I'm running fire HD6 devpreview 5.2.0 +root
Disabled ota verifier
Renamed DevicesoftwareOTA.ask
Automatic update is disabled in Amazon app store.
Still they managed to send and install Washington post app in my device. it was not there earlier.
I'm doubt about how to prevent Amazon altering my device.
Click to expand...
Click to collapse
Changes you made for ota verifier and DevicesoftwareOTA prevent Amazon from forcing an updated OS onto device, which would "break" root. Assuming you're still rooted, this didn't happen and you're seeing the Wash post that got installed when you installed/upgraded Lollipop. You can uninstall it and it will stay gone. If you did get updated, you didn't block OTA before turning on wifi and Amazon installed 5.2.2--build date July 2015 in Device settings--and you're no longer rooted. Better check!
build date is june 13, 2015.
still i have root access.
however i did uninstall it again. let me check if it may get installed again or not.
thanks a lot
Updated for 5.2.2u2, which I'm calling OS 5.0.1, September 2015 release.
Is there anyway to disable the lockscreen itself? I want to use the lockscreen from smart launcher 3 but I need to first disable the system lockscreen first for it to work properly.
rlattin24 said:
Is there anyway to disable the lockscreen itself? I want to use the lockscreen from smart launcher 3 but I need to first disable the system lockscreen first for it to work properly.
Click to expand...
Click to collapse
Nope.
DoLooper said:
Nope.
Click to expand...
Click to collapse
Well that's a bummer . Oh well I'll just to get over dealing with Amazon's random selection of wallpspers lol thanks for the reply
Updated! :good:
HELP ME!!!!!!
Im on KindleFire HD 6, i just updated to OS 5.1.1 newest Fire OS. Whenever i try to do the command pm block com.amazon.fire launcher it says Error: java.lang.SecurityExemption. Someone please tell me how to fix it. I wil include a screenshot to show you what is happeing.
cbcava said:
Im on KindleFire HD 6, i just updated to OS 5.1.1 newest Fire OS. Whenever i try to do the command pm block com.amazon.fire launcher it says Error: java.lang.SecurityExemption. Someone please tell me how to fix it. I wil include a screenshot to show you what is happeing.
Click to expand...
Click to collapse
Please relax!!!
Look at the bottom of the post for instructions on running the commands. You need to be in su. You're rooted, right?
adb shell
su
pm disable com.amazon.firelauncher
If not rooted, try: adb shell pm hide com.amazon.firelauncher
Not working!
I did what you said to do, dolooper, but the launcher isnt disabled. Am I still doing something wrong, I really want to disable the terrible fire launcher.
cbcava said:
I did what you said to do, dolooper, but the launcher isnt disabled. Am I still doing something wrong, I really want to disable the terrible fire launcher.
Click to expand...
Click to collapse
Press the Home key, choose Nova and tap Always. Reboot.
But it doesn't show the option to choose it as default!!
cbcava said:
But it doesn't show the option to choose it as default!!
Click to expand...
Click to collapse
Tap Nova in firelauncher app drawer to go to Nova. Now tap home key. If it takes you back to firelauncher, idk the problem because idk what you did. How about you post whether you're rooted or not, the exact commands you entered, and what the output was.
Dolooper, I don't have root
The command that I entered was pm hide com.amazon.firelauncher.
adb shell pm hide com.amazon.firelauncher
I feel stupid asking this so please forgive my ignorance but I searched around and could find the answer.
Can someone please tell me the command to check the status of a service?
For example, I'd like to be able to check and see if a command I ran like one of the ones above, worked or not. Or to check on a different service. I'd like to be able to run a command that shows a list of services and their status or a single service and check its status.
Would it be something like pm status [process name]?
So I've been trying to bypass this frp google lock on my tablet with samfirm and got it to the point where i can open youtube or google or any of the allowed bypass on it and have been trying to install apks such as apexlauncher and by the time i click on "settings" to allow 3rd party installs it quickly crashes the popup only and have to re-click the apk to install but does it over and over.
how can i fix this issue to bypass the lock screen?
Galaxy tab a 8.4 2020 M-T307U
Hi!
I have a iiyama te6503mis-b1ag and was playing around with it. It has android so you can install apps, but you either have to download an apk from the browser and install it from the finder or install it from a USB stick using the finder.
I tried using Aptoide but when I try to install an APK it says "unknown apps can't be installed by this user" although both the system and the app itself have permission to install unknown apps. It has this issue too for installing APKs from within other apps. I can just install APKs from within the build in finder.
I also tried installing both play services and play store, but when I open the play store it immediately crashes.
Does anyone know how I can get either Aptoide or the play store working?
Toom_Raider said:
Hi!
I have a iiyama te6503mis-b1ag and was playing around with it. It has android so you can install apps, but you either have to download an apk from the browser and install it from the finder or install it from a USB stick using the finder.
I tried using Aptoide but when I try to install an APK it says "unknown apps can't be installed by this user" although both the system and the app itself have permission to install unknown apps. It has this issue too for installing APKs from within other apps. I can just install APKs from within the build in finder.
I also tried installing both play services and play store, but when I open the play store it immediately crashes.
Does anyone know how I can get either Aptoide or the play store working?
Click to expand...
Click to collapse
Enable install from unknown sources in settings security section
marlen07 said:
Enable install from unknown sources in settings security section
Click to expand...
Click to collapse
No that doesn't work. As I said: both the system and the app itself have permission to install unknown apps.
Toom_Raider said:
No that doesn't work. As I said: both the system and the app itself have permission to install unknown apps.
Click to expand...
Click to collapse
Download kingo root https://root-apk.kingoapp.com/kingoroot-download.htm
install it, open it connect wired/wireless mouse, press get root, wait for it to get root, if it is stuck at 90%, press back and an error will appear, ignore it, close the app, delete kingo root from settings app section. turn off and turn on again, then you will have root, then try to install any app form aptoide, it will say root is detected, would you like to use root to install apps? click yes and wait for the app be installed.
I had the same problem, i bought an iiyama 55" touchscreen with iiware 9.0
The solution is very simple and works:
- Activate developer mode in the settings (tap on build number several times)
- Enable USB debugging
- Download and unpack adb platform-tools
- Move desired .apks to platform-tools folder
- Connect to adb via WiFi or LAN connection
Example: adb connect 192.168.1.1
Install the app using the following command:
adb install kodi.apk
Best regards de3ph4xx0r
The instructions below reflect the process I followed to install the Google Play Store on my Fire TV Stick 3 (sheldonp) which I have been using for a month now. To be clear, I am not responsible for anything that happens to your device as a result of following this guide.
If you already have knowledge of the process, then it is simply setting up microG Istaller Revived with the Android TV Google Play Store.
If you are new to this, then the entire process is explained below. It is assumed that the Fire TV is already rooted and has Magisk installed.
Download the following and transfer the files to the Fire TV using adb, file transfer apps or a file manager with LAN/Cloud access.
LSPosed
FakeGApps
Google Play Store (Android TV)
microG Installer Revived
LSPosed is available in two variants as of now, but the Zygisk one is considered to be the way forward. So, in case you are using the Zygisk release, then you need to enable Zygisk from Magisk settings as well.
Go to the Modules section of Magisk and select ‘Install from storage’, following which, choose the LSPosed zip. This step was tricky for me because it opens the DocumentsUI for selection, which doesn’t quite work with the remote. I used a wired mouse with OTG, but that too was quite wonky. Eventually, I managed to enable ‘Show internal storage’ from the right-hand menu and then internal storage from the left-hand menu. The good news is that once you select a folder and module, then the same folder always remains open in DocumentsUI, making future module installations easier. Reboot as required.
It is most likely that you will not see the LSPosed app on your homescreen, so navigate to /data/adb/lspd using a root file manager or adb and install the manager.apk file present in that folder to get the LSPosed app on the homescreen.
Install the FakeGapps apk and enable the module from within the LSPosed app.
Rename the Android TV Play Store downloaded earlier to Phonesky.apk and copy it to /data/adb using a root file manager or adb.
Install the microg Installer Revived module from within Magisk and reboot when prompted.
After reboot, you should see the Google Play Store icon in your app drawer. Open it, choose sign-in, after which it will redirect you to the Google web login process through microG.
That’s it! You should now have a fully functional Play Store on the Fire TV.
Bonus: Some specific apps from the Play Store fail to invoke the Amazon keyboard for input fields. In that case, you can download a keyboard from the Play Store and make it the default one. I did so for Gboard installed from the Play Store and the command to do so was as follows:
Code:
ime list
ime enable com.google.android.inputmethod.latin/com.android.inputmethod.latin.LatinIME
ime set com.google.android.inputmethod.latin/com.android.inputmethod.latin.LatinIME
Hello!
I don't see the Play Store app in the drawer even after placing the Phonesky.apk at /data/adb. I only see the Microg Revived app that I installed via Magisk
supermutant2299 said:
Hello!
I don't see the Play Store app in the drawer even after placing the Phonesky.apk at /data/adb. I only see the Microg Revived app that I installed via Magisk
Click to expand...
Click to collapse
If during the microG Installer Revived installation you see "Installing real Play Store", then it means the store was installed properly.
I have been using the FireTV Leanback Launcher since day 1 since I absolutely hate the KFTV launcher interface which also happens to not display all sideloaded apps. Not sure if you are using the default launcher then.
Thank you for the procedure, I can now use application which needs google services.
But I can't use google play store because I can't log in. Every time I enter my login, I become back to begening of login procedure. Is there is something I should do ? Thanks
xtof05 said:
Thank you for the procedure, I can now use application which needs google services.
But I can't use google play store because I can't log in. Every time I enter my login, I become back to begening of login procedure. Is there is something I should do ? Thanks
Click to expand...
Click to collapse
I ran into the same problem. Every time I entered my email address microG's Login Activity would crash. What fixed this for me was downgrading to an older version of microG. Now I'm using the version packaged with microG Installer Revived v2.4.0, and have had no issues logging in. If you're using v20.4 Magisk Manager then this the version available to download straight from the app.