Hi anybody able to get panda gamepad activated for switch it will not let me connect to the computer to activate it.
I got panda working no problems, but did a refund, it's just inferior to tincore, though it's easier to set up. Panda can't customize left analog swipe type... Drove me nutz.
MasterZeroFX said:
I got panda working no problems, but did a refund, it's just inferior to tincore, though it's easier to set up. Panda can't customize left analog swipe type... Drove me nutz.
Click to expand...
Click to collapse
Could you please explain how you got it to work as for me when I start a game the touch stops working and I have to restart the nintendo switch.
Related
Hey there! Having a bit of trouble getting my wired Razer Onza Xbox 360 controller (Tournament Edition) working with the Nexus 7.
I was browsing through the forums for a bit and the user 'sleeplessninja' posted some information saying that each controller you plug in gives out a unique Product and Vendor ID. So your third party controllers give out a different ID compared to the official MS branded ones and whatnot.
I downloaded the file inside the thread and renamed it to the Onza's VID/PID, which ended up being Vendor_1689_Product_fd00.kl I put that in the directory /system/usr/keylayout/ and rebooted the tablet but it's still not doing anything! The four lights around the Xbox button in the middle just keep flashing over and over. I do have the official Xbox branded steering wheel controller, I plugged that in and it works flawlessly, but I really want to get my Razer Onza working!
Any help would be greatly appreciated, thanks!
Bump! Still no luck here so far.
Just a little update, I've plugged in an official Xbox branded steering wheel controller and it works flawlessly, I've also tried a little $10 crabby USB keyboard, it works just fine too.
For some reason I just can't get this Razer Onza controller working! It's a bit frustrating.
Just another quick bump for the day, I've made no progress at all. Controller just has the 4 green rings around the Xbox button in the middle flashing on and off, doesn't do anything other than that.
The official steering wheel controller has all 4 lights blinking as well, but after 2-3 seconds it only shows the top left light turned on indicating player 1's controller is ready and it works fine.
Again, from the first post I've tried to add the file with the Razer Onza's Product and Vendor ID but it hasn't seemed to do anything.
u ever get it working
?
https://lkml.org/lkml/2012/7/17/644
Its everything I found. Looks like this controller works on Cyanogenmod 12 perfectly, but one drawback is that its Home button (5.0.2)
I have the same issue. I am able to use the controller with happy chick emulator playing family computer games. but when it comes to playstation games, it doesnt do anything.
Hi folks,
I have been using my Optimus 7 WP approximately 1.5 Years and Touch stopped responding few months back which is not shocking as I have already understood that this is common. I gave a try changing the Touch/Digitizer in a local shop and found it to be worthless. So the problem exists somewhere else which I am currently not worrying about. Since touch screen is just an input device, I am just curious to know if I can have some other device (Keyboard, Mouse, Joystick etc.) acting as the input.
Thought of just reusing the product before I could recycle it :angel:
Thanks & Cheers
kksridh
kksridh said:
Hi folks,
I have been using my Optimus 7 WP approximately 1.5 Years and Touch stopped responding few months back which is not shocking as I have already understood that this is common. I gave a try changing the Touch/Digitizer in a local shop and found it to be worthless. So the problem exists somewhere else which I am currently not worrying about. Since touch screen is just an input device, I am just curious to know if I can have some other device (Keyboard, Mouse, Joystick etc.) acting as the input.
Thought of just reusing the product before I could recycle it :angel:
Thanks & Cheers
kksridh
Click to expand...
Click to collapse
I doubt it. My first thought was a bt device but it won't be possible as you cannot interact with your phone to establish the connection. I'm not even sure that there are compatible input bt devices.
etrosce said:
I doubt it. My first thought was a bt device but it won't be possible as you cannot interact with your phone to establish the connection. I'm not even sure that there are compatible input bt devices.
Click to expand...
Click to collapse
Thanks for the reply. If you find something interesting to me, it will be great. :highfive:
Try, power off the phone, press:
camera, vol up, vol down buttons and connect to pc via usb, "DON´T" release any button until the lock screen
i had the same problema and replace the digitizer with no luck. so i tried to do a hard reset to fixit but instead i do this combination and the touch screen start working again.
Is there another way to calibrate this thing or do I just have a $50 paper weight ?
The left stick on my C.T.R.L. recently went out of whack, it is always moving the pointer down unless I hold a bit of "up" on it.
I tried the calibration steps from the Mad Catz site and it will not work. ie: no flashing purple light. I tried it on my M.O.J.O. and my PC, same problem.
Thank You for any help.
Soooo, paperweight then. Great!
vwtazzman said:
Soooo, paperweight then. Great!
Click to expand...
Click to collapse
Did you put in a support ticket with MadCatz? May be a defunct unit.
christoph80 said:
Did you put in a support ticket with MadCatz? May be a defunct unit.
Click to expand...
Click to collapse
Yup and it looks like the unit went bad. They will warranty it but why bother.
The sad thing is that this whole console has failed in one way or another.
I tried to pair my NYKO to it which pairs with every other android device I own and....will not pair, WTF?
And I am SO tired of seeing "not compatible with M.O.J.O." in the google store!
I have a MK908 and MK802 that will work with everything.
What't the hell MadCatz?
I should have bought a Shield.
By by MOJO
vwtazzman said:
Yup and it looks like the unit went bad. They will warranty it but why bother.
The sad thing is that this whole console has failed in one way or another.
I tried to pair my NYKO to it which pairs with every other android device I own and....will not pair, WTF?
And I am SO tired of seeing "not compatible with M.O.J.O." in the google store!
I have a MK908 and MK802 that will work with everything.
What't the hell MadCatz?
I should have bought a Shield.
By by MOJO
Click to expand...
Click to collapse
Did you update to the latest firmware? Check the MOJO icon on your homescreen, go to the fifth step and get the 205-TS firmware as that will make a huge difference to the "not compatible" incidence rate.
We've had no issues pairing the Nyko or OUYA controller with MOJO though - are you correctly placing the Nyko pad into pairing mode?
Dunno if this is resolved but for future users having an issue
The re-calibrate process for the C.T.R.L.R is as follows
Make sure the C.T.R.L.R is paired and connected to a host
Press and hold A, B, X, Y, L1 and R1 for 3 seconds – the status LED will turn purple
Press the Back button once – the status LED will begin to flash
Move each stick and trigger through their full range of movement 4 times
Press the Start button once – the status LED will return to blue to show the pad is in normal operation
According to madcatz
Edit: Dunno if I even read the first post Jesus,
also stated this before in the correct thread but the update dramatically increased the incompatible message for me, hardly saw it before now its every other app and loads that used to be compatible ain't. Controller is much much better. Just now I've got the choise of laggy controller and loads of apps or brilliant controller and no apps. Lose lose
Ash180287 said:
Dunno if this is resolved but for future users having an issue
The re-calibrate process for the C.T.R.L.R is as follows
Make sure the C.T.R.L.R is paired and connected to a host
Press and hold A, B, X, Y, L1 and R1 for 3 seconds – the status LED will turn purple
Press the Back button once – the status LED will begin to flash
Move each stick and trigger through their full range of movement 4 times
Press the Start button once – the status LED will return to blue to show the pad is in normal operation
According to madcatz
Edit: Dunno if I even read the first post Jesus,
also stated this before in the correct thread but the update dramatically increased the incompatible message for me, hardly saw it before now its every other app and loads that used to be compatible ain't. Controller is much much better. Just now I've got the choise of laggy controller and loads of apps or brilliant controller and no apps. Lose lose
Click to expand...
Click to collapse
interesting instructions.. read more like a finishing move lol
Yeah, sucks google play is stuffed.. I tried going back to the previous firmware update but the rooting doesn't fix it :/
I am having the same issue with my Mac. Tried to recalibrate but its stuck at the bottom left of the screen.
phone was working fine but from last two week the screen starts moving automatically, Wi-Fi turns on automatically at any time. the install button of Google play doesn't work (seems like touch issue) but when i touch the same spot with camera application, it works fine. i am on stock ROM (4.4.2, kernel 3.4.0, KOT49l ) and tried resetting the phone multiple times but facing the same issue.
please help me resolving this issue.
regards.
Just flash the firmware again !!
-iNCEPTiON- said:
Just flash the firmware again !!
Click to expand...
Click to collapse
These are not software problems (dead touchscreens spots), your knock on will not working. It's hardware issue, I think you need sending it back to LG
bluesky2307 said:
These are not software problems (dead touchscreens spots), your knock on will not working. It's hardware issue, I think you need sending it back to LG
Click to expand...
Click to collapse
You are just scaring ppl .. You said that my phone has probblem too .. So just dont scare ppl .. and try to help them..
i had this kind of issue with my other phone, I just downgraded to Jelly Bean and it worked fine ... and did the touch drivers update from the hidden menu 3845*#802# ...
i think you have a dead section along the top of your screen, about half an inch down. Its been fairly common. Its not real noticeable at first , bc that area of the screen isnt used often, but its EXACTLY where the play store install button is, and your knock on will no longer work. you need a new screen. or flip it to landscape whenever (seldomly) you need that area of screen. you can test it by getting LCD tester from the playstore , or by using quickmemo to draw on your screen.
findinghomer said:
i think you have a dead section along the top of your screen, about half an inch down. Its been fairly common. Its not real noticeable at first bc that area of the screen isnt used often, but its EXACTLY where the play store install button is, and your knock on will no longer work. you need a new screen. or flip it to landscape whenever (seldomly) you need that area of screen. you can test it by getting LCD tester from the playstore , or by using quickmemo to draw on your screen.
Click to expand...
Click to collapse
This happened to me exactly, about a month back. It seems to be right across where the 2nd from the top messages are. You can download YAMTT https://play.google.com/store/apps/details?id=com.rn.yamtt&hl=en
I use the PAINT option and move my fingers around the top. It was a solid strip out near the top. Knock On will no longer work, but Knockoff will.
findinghomer said:
i think you have a dead section along the top of your screen, about half an inch down. Its been fairly common. Its not real noticeable at first , bc that area of the screen isnt used often, but its EXACTLY where the play store install button is, and your knock on will no longer work. you need a new screen. or flip it to landscape whenever (seldomly) you need that area of screen. you can test it by getting LCD tester from the playstore , or by using quickmemo to draw on your screen.
Click to expand...
Click to collapse
when i touch the same spot with camera application, it works fine.
cheekugr8 said:
when i touch the same spot with camera application, it works fine.
Click to expand...
Click to collapse
that could be because the camera button has more "active area" meaning, it will still work if you tap near but not exactly in the same location. the install button on the play store is very very precise. if your knock on does work, then its probably just software. but if your knock on does not work, i recommend testing the hardware with quick memo.... draw lines all the way up and down your screen slowly, and see if there is a break in that area. if its not the screen, unroot, and go all the way back to stock
i don't know how but it has started working automatically form last 10 minutes and google play button is now accessible.
i hope it wont give that error again.
thanks for all good suggestions.
cheekugr8 said:
i don't know how but it has started working automatically form last 10 minutes and google play button is now accessible.
i hope it wont give that error again.
thanks for all good suggestions.
Click to expand...
Click to collapse
In developer options. Tick Show Touches option. you touch any area on touch screen and check dead zone or using Quick memo
Just seen the news on Xperia Blog.
first thing i noticed after the update to the ps4 and playstation app now the device is listed as "Sony/5803"
edit:
work like a charm hope it will not require the drm so it will have a chance to not be locked on non sony devices.
Any plans for PS3 remote by Sony?
Someone try it on their Z3 Compact and post an initial impression! I'm at work...just started my day!...damn...
Can I use a dualshock 3 on my z3 compact with remote play?
war1 said:
Any plans for PS3 remote by Sony?
Click to expand...
Click to collapse
No, this feature is only for PS4
squadz said:
Can I use a dualshock 3 on my z3 compact with remote play?
Click to expand...
Click to collapse
No, this feature is only for PS4s dualshock
I'm also interested in initial impressions of remote play for Z3C. Especially regarding screen size and lag.
Played with it a bit last night. It definitely works if you have a fast connection. I was able to play Shadow of Mordor even.
But with the size of the screen it's pretty hard to really see any details or text. I think it would be much much cooler on the Z3 or the tablet. The screen size makes it kinda pointless, but some arcade games may work really well.
On the other hand, I couldn't get the ps4 controller to repair with my ps4 after! Anyone have any ideas?
Alex2x3 said:
Played with it a bit last night. It definitely works if you have a fast connection. I was able to play Shadow of Mordor even.
But with the size of the screen it's pretty hard to really see any details or text. I think it would be much much cooler on the Z3 or the tablet. The screen size makes it kinda pointless, but some arcade games may work really well.
On the other hand, I couldn't get the ps4 controller to repair with my ps4 after! Anyone have any ideas?
Click to expand...
Click to collapse
You tried re-pairing it using the charging cable, right? That should do it instantly.
schnidex said:
You tried re-pairing it using the charging cable, right? That should do it instantly.
Click to expand...
Click to collapse
Yea, tried it in a bunch of different ways. With the controller on and off, holding the PS button, and tried it while booting the ps4 up. Also was sure to disconnect from the app itself, and have my phones bluetooth off. The controller light just continuously blinks.
Idk what was going on, hoping it'll start working today.
Alex2x3 said:
Yea, tried it in a bunch of different ways. With the controller on and off, holding the PS button, and tried it while booting the ps4 up. Also was sure to disconnect from the app itself, and have my phones bluetooth off. The controller light just continuously blinks.
Idk what was going on, hoping it'll start working today.
Click to expand...
Click to collapse
did you try resetting the controller first? there's a reset button on the back of the controller. i think it's near the left trigger buttons (under the light bar). then after that you redo the pairing process.