Hello, I have a ATT v20 that was running lineageos 14.1. I booted into twrp and wiped everything. I went to install the 16.1 rom but now the model is showing as f800, the korean variant. I can still get into twrp + fastboot, but Idk where to go from here. Is it stuck as f800 or is it just being read wrong? Would I need to flash a stock rom with lgup and start over?? Thanks.
Related
So i have a jdi panel d800 g2 ( iwas on 20k). i rooted with ioroot and installed TWRP then flashed a jdi KK kernel to avoid white lines. Then i followed the steps to install g3 rom. cleared memory etc and flashed baseband. when i flashed the g3 rom it seemed to go well and then asked me to set it up by choosing my carrier and such. when it was finished it asked me to reboot and then proceeded to get stuck on the lg logo.. so i flashed baack to 20c and got the ota update to 20y did everything again except install the Baseband and rom... how can i get it on right? couldnt find advice on cloudyg3 rom thread... any help appreciated!
So, first got my LG G2. Was on 4.4.2. Managed to get custom recovery on it, cool. Attempted flashing resurrection remix. Success, bootloop.
TOT'd back to stock firmware, 4.2.2. Managed to root device, and place custom recovery on it after multiple apps because I don't understand what the f*** "Loki" Is, or anything. So I attempted to flash 4.4.2 ROM, failed. Cool. Attempted to flash resurrection remix again, got aboot error, and loki-ifying failure of some stuff. Rebooted device, bootloop. Cool. So, how do I place lollipop on the LS980 4.2.2?
@edit, got LiquidSmooth 4.4.4 ROM on there from 4.2.2. Had audio error, flashed newer nightly of LiquidSmooth, got bootloop. Flashed KK Baseband from Cloudy's thingy for the LS980, ran CloudyG2 LP Rom, installed via aroma, now I'm stuck in fastboot. gg.
Are you sure you're flashing the right versions? i.e. D801 for T-Mobile, etc
zeeebs said:
Are you sure you're flashing the right versions? i.e. D801 for T-Mobile, etc
Click to expand...
Click to collapse
Yeah, it was stated on by the pages of which, LS980 (Sprint), VS980(Ver) 802, int.. Etc.
Now I'm having to attempt to modify tot files to change model versions because my phone
Appears to be model LG-F320S in Download mode, but it's not. I flashed CloudyG2 3.0, and his LS980 KK Baseband
And that's what occured me to get stuck in fastboot mode. Now I've been reflashing stock firmware img's and I can't
Get back into fastboot mode, so I'm stuck in Downloading Mode but as I modify the hex, and try to do the tot file, I
Continuously get wrong model number. It's kinda aggravating...
@edit, managed to get back to 4.2.2 stock firmware with this http://forum.xda-developers.com/sprint-g2/general/dll-to-bypass-lg-flash-tool-model-check-t2990665
Now how do I upgrade to Lollipop?
hi. i have G2 which is infact AT&T model D800.
i have stock rom on it. 4.2.2 jelly bean.
i rooted it and also installed recovery using flashify software from playstore/
i downloaded Cloudy rom 3.3
and i first wiped, then i installed the bootloaded which was kk bootloader (this is the main issue i guess) then i flashed the cloudy rom and CHOOSE MY AT&T model.
after that it restarted and then i got into this weird boot issue.
now whenever i start phone it goes to firmware update page.
i go to lg flashtool and i try to flash the stock rom 4.2.2 for D800 but it says failed for model is different.
i choose D802 and it says same
i see that in firmware update page on phone, it says cloudy 3.3 and it says mobile version is 802 but my phone is actually 800.
but now neither 800 nor 802 stock firmwares are working on this piece of ****.
i also have backup of my stock rom in twrp but i cant go to twrp.
can someone help me what to do now?
aami.aami said:
hi. i have G2 which is infact AT&T model D800.
i have stock rom on it. 4.2.2 jelly bean.
i rooted it and also installed recovery using flashify software from playstore/
i downloaded Cloudy rom 3.3
and i first wiped, then i installed the bootloaded which was kk bootloader (this is the main issue i guess) then i flashed the cloudy rom and CHOOSE MY AT&T model.
after that it restarted and then i got into this weird boot issue.
now whenever i start phone it goes to firmware update page.
i go to lg flashtool and i try to flash the stock rom 4.2.2 for D800 but it says failed for model is different.
i choose D802 and it says same
i see that in firmware update page on phone, it says cloudy 3.3 and it says mobile version is 802 but my phone is actually 800.
but now neither 800 nor 802 stock firmwares are working on this piece of ****.
i also have backup of my stock rom in twrp but i cant go to twrp.
can someone help me what to do now?
Click to expand...
Click to collapse
Hex edit the tot to be a d802 then flash it
Sent from my LG-D800 using Tapatalk
hi,i need some help flashing Resurrection Remix R24 5.1.1.
Currently my D802 running on CloudyG2 3.3 + dorinmanx 8.9,but before flashing Cloudy 3.3,running on stock LP without flashing any bootstack.
I have latest Blastagor TWRP installed on my D802.
yesterday i tried to flash RR but stuck in LG logo,should i flash any bootstack and what bootstack should i flash?
thanks.
First of all you need to install it https://drive.google.com/file/d/0BxADHj0aSysFN1Zqc2lwRU94WUk/view?pref=2&pli=1 after that reboot the recovery and install the loki bootstack for your lg g2 variant https://drive.google.com/file/d/0BxADHj0aSysFN1Zqc2lwRU94WUk/view?pref=2&pli=1 then install the rom and the gapps. After these passage reboot the device and wait 3/4 minutes
Thanks,i finally success flashing RR LP.
BTW,if i want to flash RR MM,do i need to flash patch to LP then hybrid bootstack or i just need to flash bootstack?
You can choose both the patch because every rom mm that i've tried boot with both
Prerequisites: D802, 32 GB, Stock 4.4.2. I believe "Int" version (original motherboard was replaced)
I tried to upgrade stock 4.4.2 with CM13 and failed with the brick result (LG logo for a couple of seconds and the black screen then).
Now the recovery mode is available (TWRP 3.0.2 bump blastagator) but there is no android image loaded except CM 13.0 snapshot 20160418 which causes the brick state.
The questions are following:
What was wrong?
What proper android image can be used to unbrick?
How to load image on the phone?
Since I found Mount->USB-OTG checkbox in the TWRP, then I hope the OTG cable can be used to load image from USB flash drive. Unfortunately I can check it now.
Will be appreciate for the help.
KK bootloader, that's the reason. If you want to have stock bootstack you need to update to 5.0.2 stock, root and then flash TWRP and CM13. Everything'll work fine.
edi194 said:
KK bootloader, that's the reason. If you want to have stock bootstack you need to update to 5.0.2 stock, root and then flash TWRP and CM13. Everything'll work fine.
Click to expand...
Click to collapse
Thanks edi.
Do I need to replace TWRP bootloader with another one (I guess stock) and then update to 5.0.2 or I can start updating 5.0.2 with TWRP?
If you want to stay with stock bootstack:
You need to flash 5.0.2 KDZ file with download mode.
If you want to do it fast:
You need to flash hybrid bootstack.
Thanks a lot.
Fixed.