hi,i need some help flashing Resurrection Remix R24 5.1.1.
Currently my D802 running on CloudyG2 3.3 + dorinmanx 8.9,but before flashing Cloudy 3.3,running on stock LP without flashing any bootstack.
I have latest Blastagor TWRP installed on my D802.
yesterday i tried to flash RR but stuck in LG logo,should i flash any bootstack and what bootstack should i flash?
thanks.
First of all you need to install it https://drive.google.com/file/d/0BxADHj0aSysFN1Zqc2lwRU94WUk/view?pref=2&pli=1 after that reboot the recovery and install the loki bootstack for your lg g2 variant https://drive.google.com/file/d/0BxADHj0aSysFN1Zqc2lwRU94WUk/view?pref=2&pli=1 then install the rom and the gapps. After these passage reboot the device and wait 3/4 minutes
Thanks,i finally success flashing RR LP.
BTW,if i want to flash RR MM,do i need to flash patch to LP then hybrid bootstack or i just need to flash bootstack?
You can choose both the patch because every rom mm that i've tried boot with both
Related
Hi. After flash LP 5.0.1 i need to flash KDZ. Now i have old TWRP with JB bootloader.
1. What is defference between loki and bump ? What does that mean bumped
2. When i have bumped 2.8.4.0 i can upgrade to KK bootloader and flash all custom ROMs or only with BUMPED tag ?
For now i flash all roms on JB bootloader and 2.7 TWRP and all works well (stock, optimus, claudyfa)
witek_77 said:
Hi. After flash LP 5.0.1 i need to flash KDZ. Now i have old TWRP with JB bootloader.
1. What is defference between loki and bump ? What does that mean bumped
2. When i have bumped 2.8.4.0 i can upgrade to KK bootloader and flash all custom ROMs or only with BUMPED tag ?
For now i flash all roms on JB bootloader and 2.7 TWRP and all works well (stock, optimus, claudyfa)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=58770769
thanks a lot. I know now everything. So i flash KK bootloader and TWRP 2.8.4.0 now. Thread to close.
after install TWRP and KK bootloader i have SECURE BOOT error. I think problem is flash kk bootloader at stock rom from KDZ
witek_77 said:
thanks a lot. I know now everything. So i flash KK bootloader and TWRP 2.8.4.0 now. Thread to close.
after install TWRP and KK bootloader i have SECURE BOOT error. I think problem is flash kk bootloader at stock rom from KDZ
Click to expand...
Click to collapse
If you flashed KK bootloader, you had to flash bumped kernel too (or stock KK not bumped kernel if you are on stock firmware), did you it ? If you have flashed bumped recovery and kk bootloader, you can acces to recovery with hard key combo, and flash a bumped kernel now, for being able to boot your firmware.
For answering your question in my thread, my 20H for bumped recovery contains the bootloader and the modem, as mentionned in this OP thread, so, with it, no need to flash kk bootloader manually.
You had a secure boot error because in your situation (stock D80220H with JB booloader + lokified patched kernel), to migrate to a bumped recovery, you needed to return to 20H originals bootstack (bootloader + others partitions => aboot,tz,sbl1,rpm,persist,laf,dbi) + originals 20H kernel with original 20H system/lib/modules (or bumped custom kernel).
now i know I flash KK bootloader AFTER clean KDZ. I didn't reflash boot after KK bootloader. Thanks a lot. My education was stopped on loki a year ago so now i need to reeducation
Hi guys,
I've got a LG G2 (d802) and recently i've flashed on it the latest cyanogen12. But now the problem is that i can't flash any other ROM! I've tried to flash the CloudyG3 2.0 but after the reboot it stucks on the logo for a minute and then enters again in the recovery. The only ROM that i can flash, and fully working, is Resurrection Remix (modified cyanogen12)!
Please help I want to get back to CluodyG3 or Lg G2's stock rom!
Thanks
Hi,
Thanks for using XDA Assist Please Standby when our Moderators move your post to your Device Specific Forum
!!!wolverine!!! said:
Hi guys,
I've got a LG G2 (d802) and recently i've flashed on it the latest cyanogen12. But now the problem is that i can't flash any other ROM! I've tried to flash the CloudyG3 2.0 but after the reboot it stucks on the logo for a minute and then enters again in the recovery. The only ROM that i can flash, and fully working, is Resurrection Remix (modified cyanogen12)!
Please help I want to get back to CluodyG3 or Lg G2's stock rom!
Thanks
Click to expand...
Click to collapse
CloudyG3 = http://forum.xda-developers.com/lg-g3/development/rom-cloudyg3-1-0-t2917467
CloudyG2 = http://forum.xda-developers.com/showthread.php?t=2783192
Which one are you trying to flash exactly? CloudyG3 is only compatible with D855 F400S/L/K, D802 is NOT supported.
If you're trying to install CloudyG2 the reason you're getting into a bootloop is because when you updated to Lollipop, a few of your partitions changed as well, so you need to revert your partitions back to KK partitions before flashing a KK based ROM.
There are 2 options you have available:
Option 1: (recommended)
- Visit http://www.lg-firmware-rom.com, enter your IMEI and download the firmware file it gives you.
- Follow the LGG2 - Return to Stock Guide.
- You will be back on Stock KK firmware and be completely unrooted. You will need to root and install a custom recovery, then install CloudyG2 if you wish.
Option 2:
Luckily you have a D802 and somboons has created a flashable .zip which you can flash via TWRP and get your KK partition layout back. - D802 ONLY!
How to restore KK partitions/flash other ROM (credits to @[B]somboons[/B]) - #2
- Download this flashable zip: Download
- Reboot to recovery and flash LGG2 -droidth-fixed-KK-partition.zip
- Flash other G2 stock based ROM (in your case CloudyG2)
- Reboot
Click to expand...
Click to collapse
I have not yet tested this KK partition zip so I advise you to use the Return to Stock method.
Hello, today I decided to install Google Edition 1.4 rom, just after flashing I bricked my G2, and my PC detected a lot of partitions. I fixed that, flashed stock KDZ with LG Flash Tool, started again. And its the same result. Then after installing stock rom, I tried to install another Lollipop rom (Cloudy G2 3.3) and again PC detected only a lot of partitions.
Sorry for pure English.
Dovi2kas said:
Hello, today I decided to install Google Edition 1.4 rom, just after flashing I bricked my G2, and my PC detected a lot of partitions. I fixed that, flashed stock KDZ with LG Flash Tool, started again. And its the same result. Then after installing stock rom, I tried to install another Lollipop rom (Cloudy G2 3.3) and again PC detected only a lot of partitions.
Sorry for pure English.
Click to expand...
Click to collapse
what twrp version you are using.?
did you root your phone? did you use auro rec for KK?
did you installed this bootstacks for your varian
5.02 xxxx bumped KK bootstacks.
did you reboot into recovery flashing bootstacks to take effect.?
http://forum.xda-developers.com/lg-g2/development/lg-g2-bootstacks-t3173715
Prerequisites: D802, 32 GB, Stock 4.4.2. I believe "Int" version (original motherboard was replaced)
I tried to upgrade stock 4.4.2 with CM13 and failed with the brick result (LG logo for a couple of seconds and the black screen then).
Now the recovery mode is available (TWRP 3.0.2 bump blastagator) but there is no android image loaded except CM 13.0 snapshot 20160418 which causes the brick state.
The questions are following:
What was wrong?
What proper android image can be used to unbrick?
How to load image on the phone?
Since I found Mount->USB-OTG checkbox in the TWRP, then I hope the OTG cable can be used to load image from USB flash drive. Unfortunately I can check it now.
Will be appreciate for the help.
KK bootloader, that's the reason. If you want to have stock bootstack you need to update to 5.0.2 stock, root and then flash TWRP and CM13. Everything'll work fine.
edi194 said:
KK bootloader, that's the reason. If you want to have stock bootstack you need to update to 5.0.2 stock, root and then flash TWRP and CM13. Everything'll work fine.
Click to expand...
Click to collapse
Thanks edi.
Do I need to replace TWRP bootloader with another one (I guess stock) and then update to 5.0.2 or I can start updating 5.0.2 with TWRP?
If you want to stay with stock bootstack:
You need to flash 5.0.2 KDZ file with download mode.
If you want to do it fast:
You need to flash hybrid bootstack.
Thanks a lot.
Fixed.
Does anyone know how to fix the bootloop when flash custom ROMs after the 7.0 update? I have a xt1575 and I updated to stock 7.0 via stock recovery. But now whenever I flash twrp and try to flash a custom ROM, it gets stuck in a bootloop. Does anyone know how to fix this?
Just Flash a mm like RR and than a N (RR) overwriting last ROM without wiping anywhing. After that back to twrp And flash any N ROM again. It worked for me.
Flash MM modem for your region.