A2017 Unable to flash ROM from SD - ZTE Axon 7 Questions & Answers

Was trying to root my phone and after unlocking the bootloader, the flash failed somewhere so I have no OS. Now it just boots to the bootloader. I've tried to use a SD to flash a ROM in stock recovery mode but I get
"This Package is for "ailsa_ii" devices; this is a " ".
E: Error in /sideload/package.zip (Status 8) "
USB Debugging is disable so I can't use ADB and MiFlash isn't working.
What should I do?
Thanks.

Are you able to get into EDL by holding up power + vol down+vol up for 10 seconds? The red led will blink if you succeed, If you are able to get there, then use Axon 7 EDL tool, flash full EDL rom, find them on axon 7 forum

Related

[Q] Huawei C8815 not able to Boot "Image Signature Verify Fail"

I have Huawei C8815, I am facing the following situation
I installed the stock ROM with 3 keys method, than i unlocked the network with networkunlock.bat file.
Later I tried to install one ROM by CWM Recover and I toggled Signature Verification to OFF
When I restarted my phone, It Shows "Image Signature Verify Fail"
1. My phone is not going to Recovery Mode Menu by Vol+ and Power button.
2. My phone is not going to ADB mode by VOL- and Power button.
In both these situations my phone shows "Image Signature verify fail" Install the image with correct signatures.
3.When I try to install the stock ROM by pressing Vol+ and Vol- and Power button, after step 1 in step 2 it says Update failed.
As per my knowledge when network is unlocked the phone will not accept the stock ROM. For Relocking the network we have a tool OFFICIAL FIRMWARE.BAT but for running the bat file the phone must be loaded in ADB mode. My phone is not loading adb drivers in any situation.
It is showing only drivers Android Sooner adb interface.
In this driver environment i cannot do any adb function with my phone.
What to do? I am stuck
I dont know much about JTAG and all. If anything is possible to do with JTAG or any other method, Please guide me in this matter
This is for Motorola Defy and Defy+. You might be in the wrong section, my friend.
Have you worked it out? I flashed OEM partition carelessly with the img from g610c and get exact that you faced. btw, does your networkunlock.bat file work with the simlock ? please share if you don't mind, thanks
pragyavan said:
I have Huawei C8815, I am facing the following situation
I installed the stock ROM with 3 keys method, than i unlocked the network with networkunlock.bat file.
Later I tried to install one ROM by CWM Recover and I toggled Signature Verification to OFF
When I restarted my phone, It Shows "Image Signature Verify Fail"
1. My phone is not going to Recovery Mode Menu by Vol+ and Power button.
2. My phone is not going to ADB mode by VOL- and Power button.
In both these situations my phone shows "Image Signature verify fail" Install the image with correct signatures.
3.When I try to install the stock ROM by pressing Vol+ and Vol- and Power button, after step 1 in step 2 it says Update failed.
As per my knowledge when network is unlocked the phone will not accept the stock ROM. For Relocking the network we have a tool OFFICIAL FIRMWARE.BAT but for running the bat file the phone must be loaded in ADB mode. My phone is not loading adb drivers in any situation.
It is showing only drivers Android Sooner adb interface.
In this driver environment i cannot do any adb function with my phone.
What to do? I am stuck
I dont know much about JTAG and all. If anything is possible to do with JTAG or any other method, Please guide me in this matter
Click to expand...
Click to collapse
nothing happened, i sent back device to China and they sent new one. now working great

Huawei nova instal update failing, "your device has failed verification etc." HELP!!!

Huawei nova instal update failing, "your device has failed verification etc." HELP!!!
So, i have unlocked bootloader (can l-11), and then flashed stock firmware b350. After that my device is stucked on b350. System update is failing after few % same as dload method. HiSuite says that device is updated to newest version but it isnt. Bootloader is unlocked and i cant relock it becouse its failing in adb and fastboot. After rebooting the message "your device has failed verification etc." is showing.
i tried to restore in recovery, factory reset, flashing firmware again. Nothing worked.
Please help
sorry for picking wrong forum category
plenikowski.michal said:
So, i have unlocked bootloader (can l-11), and then flashed stock firmware b350. After that my device is stucked on b350. System update is failing after few % same as dload method. HiSuite says that device is updated to newest version but it isnt. Bootloader is unlocked and i cant relock it becouse its failing in adb and fastboot. After rebooting the message "your device has failed verification etc." is showing.
i tried to restore in recovery, factory reset, flashing firmware again. Nothing worked.
Please help
sorry for picking wrong forum category
Click to expand...
Click to collapse
Did you put the update.app in a folder called dload. Then unplug phone and reset the phone holding the vol + and vol - buttons as it boots? It always fails for me if the usb is plugged in.
Cooks_08 said:
Did you put the update.app in a folder called dload. Then unplug phone and reset the phone holding the vol + and vol - buttons as it boots? It always fails for me if the usb is plugged in.
Click to expand...
Click to collapse
No, i did it after unplug

Huawei P9 Lite VNS-L31 stuck in error mode, please help!

I've been trying to update my phone to emui 5.0, every time it just says update failed. I also tried to flash custom roms through twrp, which always make my build number to something about test-keys. Maybe I'm just to dum. I wiped the system and tried again, but when booted to fastboot it says locked bootloader(it isn't what I want) so I unlocked the bootloader. Now it somehow only boots into the error mode: NO11(recovery image) and NO2(load failed).
I tried button combinations, it just keeps booting to error mode(I also read through other threads, but the solutions like waiting till the phone dies, than press volume - and connect to pc didn't work).
PLEAEAEAS Help!!!

[bricked][help] bricked nokia

so this is status of my device
bootloader ...locked
recovery....ok
fastboot mode .....ok
so i tried two options make ota zips and flash them via stock recovery (i coded update script and signed it but it says verfication failed ).
and i tried all fastboot options.
i tried flashing with ost.
i tried QFIL but it dosent recognize my devize .
edl cable just boots device in download mode,

[HELP] MI A1 Failed to load BCB message, failed to fsync (operation not permitted).

Yesterday suddenly while turning on my device it stuck at android one logo.
Device status : Bootloader locked, No Root. Never hard reset in past. it was running as it was out of the box with latest May 2020 security update.
So, i tried to unlock bootloader with adb which offcourse failed.
then i tried to hard reset, as i opened recovery mode (power + vol+) there was an error E: failed to load bcb message, failed to fsync : operation not permitted.
still i choose wipedata/factory reset. it stuck at [wiping data... formatting disk...] for 5 hours. i understood it wont proceed.
Then, i opened the device went to unlock bootloader with EDL method as shown in few videos ( by connecting pins and plugging usb to pc). it showed in the pc ( qualcomm was listed in device manager> ports)
Then i downloaded Mi flash and official rom, was unable to flash with error "ack count don't match".
Again reading here and there, i downloaded miflash-beta, it was able to flash the device successfully.
disconnected the usb, connected the battery strap and started device > Again it stuck at android one screen for 1 hour.
So, i again went to recovery mode to find out that the error " E: failed to load bcb message, failed to fsync : operation not permitted." Still exists.
Read here in some thread that it is related to partition damaged, but no solution anywhere.
Please help me with solution. This is my only phone. i don't have any job nor money to buy other phone during lockdown.
HELP.
Thanks everyone for this wonderful forum.
MIA1_Stuck said:
Yesterday suddenly while turning on my device it stuck at android one logo.
Device status : Bootloader locked, No Root. Never hard reset in past. it was running as it was out of the box with latest May 2020 security update.
So, i tried to unlock bootloader with adb which offcourse failed.
then i tried to hard reset, as i opened recovery mode (power + vol+) there was an error E: failed to load bcb message, failed to fsync : operation not permitted.
still i choose wipedata/factory reset. it stuck at [wiping data... formatting disk...] for 5 hours. i understood it wont proceed.
Then, i opened the device went to unlock bootloader with EDL method as shown in few videos ( by connecting pins and plugging usb to pc). it showed in the pc ( qualcomm was listed in device manager> ports)
Then i downloaded Mi flash and official rom, was unable to flash with error "ack count don't match".
Again reading here and there, i downloaded miflash-beta, it was able to flash the device successfully.
disconnected the usb, connected the battery strap and started device > Again it stuck at android one screen for 1 hour.
So, i again went to recovery mode to find out that the error " E: failed to load bcb message, failed to fsync : operation not permitted." Still exists.
Read here in some thread that it is related to partition damaged, but no solution anywhere.
Please help me with solution. This is my only phone. i don't have any job nor money to buy other phone during lockdown.
HELP.
Thanks everyone for this wonderful forum.
Click to expand...
Click to collapse
did you find any solution
Same with my phone. Did you find any solution ?

Categories

Resources