Related
I noticed the first scratch on the corner of my Jam today. Since electronics always take the most abuse on the corners, I devised a quick and easy way to protect the corners of my Jam while I'm in Europe for the next 3 weeks. Take electrical tape or clear satin tape and place a piece over the corners. Works best if you cut a slit in the tape so you can fold it around the corner without wrinkles. In all probability the device will land on its corners if dropped or take the most abuse on the corners if scraped against something. Thus, problem solved; I did it to my digital camera too. It doesn't look half bad on either device, and if you can't stand the black corners, just use clear tape. Any tape works as long as the adhesive won't stick to the advice after you remove the tape.
damn that's dead sexy :lol:
Damn! Why didn't I think of that????
Why don't you run the tape all the way round? I think it will look somewhat better!... :wink:
I'm sorry, but that has to be the stupidest looking thing I've seen in a long time. Why don't you just get a silicon case for about $10 off of EBAY? I mean, if you REALLY need electrical tape and that's all you can find...great. But just get a cheap latex or silicon case such as the ones from JavoEdge.com.
Do you put electrical tape on the front and rear bumper of your car too?
GHETTOOOOOOO
Just curious, what specifically do you expect to happen in Europe over the next three weeks that would necessitate such a precaution when you don't prepare against similar risks at home :wink: ?
hehehehe... Good point JPreston!!! :lol:
I don't get it! People seem to get very upset when they discover they scratched the ball mirror on the back of their JAM. Now we have a JAM covered in electrical tape. Should we all carry our devices in the original box? Or better yet never use them to keep them in pristine condition? I am not saying I didn't get a little ticked off when I found a nice big scratch in the corner after a small drop but come on! I think we're all getting a bit too precious. Anyway, to each their own.
Of far more concern is the gunk that gets on the screen from my face every time I hold the JAM to my head! I mean yuck! What the heck is up with that? Is there that much oil on my face??? I just washed it! I gave my phone to my friend the other day to make a call and his face left some sort of super oil on the screen that wouldn't scrub off for several minutes! Its gross and embarassing! I think we need some sort of face oil protector!
Does anybody have any idea for cheap screen protection? I think the prices are outrageous for the slices of film sold as protectors.
I use the cheapest of them all...
They are made for Palm devices and are sold on flea markets or "One Dollar" stores... :lol:
They cost $1 dollar the 12 Pack!
Just cut them to size and go!
scratch? i've droped my mini 2 times and got 3 dent edges. damn sad. The stupid casing they gave me is getting pretty loose. I put it on my belt.... so everytime i knock it seems that pouch just flings out. The screw and the plastic seems to have worn off.
I think i'm gonna go to a skinning shop to hide the dent edges.
try to buy a leather case for Nokia 7610. it fits.
You dont use that in the box lether case. It will easily fall of that tiny hook.
Wit the lether case of Nokia, it is mounted sideway into the belt by a leather that is sewed.
mine has never fallen. Even if it falls off the belt when you undress, the leather case is so stiff that it will not dent the mini.
@Emil...
Can you post a picture of your JAM in the Nokia case for us to see?
vmirage said:
scratch? i've droped my mini 2 times and got 3 dent edges. damn sad. The stupid casing they gave me is getting pretty loose. I put it on my belt.... so everytime i knock it seems that pouch just flings out. The screw and the plastic seems to have worn off.
I think i'm gonna go to a skinning shop to hide the dent edges.
Click to expand...
Click to collapse
Dropped mine on a concrete floor from about 1.5 meters and got a really ugly dent on one of the corners of the battery cover. The cover wouldn't even go back on!
Easy fixed though. Just took a plastic pen and pushed the dent out from the inside. It still shows a slight dent and small scratches if you look closely, but what the heck...
Anyone know of any metallic paint (model, SKU, UPC code) that I could use on my JAM? I rarely put on my seatbelt, and the one time that I decide to play safe, I scratch up the corner of my JAM. I'd never go "ghetto" as one person put it in the thread, but I'm sure there's something out there to match it up. Any ideas?
Get the jam off of your belt and put it in a proper car holder and you will not only protect it from getting scratches from your seatbelt, you will also get it charged while driving. And also one less reason not to wear a seatbelt that could save your life in the case of an accident.
Incidentally, can anyone recommend a decent car kit for the JAM? I want one I can mount with some amount of ease somewhere on the console... I don't like those ones that stick on the windscreen.
elyl said:
Incidentally, can anyone recommend a decent car kit for the JAM? I want one I can mount with some amount of ease somewhere on the console... I don't like those ones that stick on the windscreen.
Click to expand...
Click to collapse
www.brodit.com
Just don't order it from Expansys as all their product descriptions for Brodit are messed up. Does anyone know where else to buy Brodit because I still need the mounting clip for my car (Expansys kept sending the wrong one). Can you buy from them (Brodit) directly?
Thanks.
Well there seems to be a lot of views about the best cases out there, just wondered what the most 'pocket friendly' case was?
Don't care about the material as long as it isn't a sock or a stick-on option (ie an actual case)
Definitely no belt loop, preferably a very low profile clasp etc...
Basically just want something that is likely to stop it getting scratched up in a bag or if it was dropped, but don't need full armour!
Any good suggestions?
I've been looking for something pocket friendly as well... I'm almost ready to just get a thin sunglass pouch... currently I'm using a case for a Sprint Mogul, but it has a belt clip...
i use an ipod slip case, and have pulled off the belt clip, gives good protection to the screen,
going to order a leater slip case from www.pdair.com to see what thats like
I've got one of these - http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=6561
Doesn't add much to the size at all, and I keep mine in my pocket all the time.
Here is what I'm using, it comes in Black, Brown or Pink:
http://www.wirelessground.com/tiltflipblack.html
It covers the back and front very well, the cut outs are aligned very well, it has a slimmer form factor than the Krussel Orbit I normally use.
Here is the one my spouse uses, it comes in Black or White:
http://www.boxwave.com/products/dlsleeve/at_t-tilt-designio-leather-sleeve_2906.htm
I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
SpeedRazr said:
I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
2) If the slide up and tilt works fine with the case on
3) The general quality and how bulky it is in a pocket
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone
scharnet said:
Here is what I'm using, it comes in Black, Brown or Pink:
http://www.wirelessground.com/tiltflipblack.html
It covers the back and front very well, the cut outs are aligned very well, it has a slimmer form factor than the Krussel Orbit I normally use.
Here is the one my spouse uses, it comes in Black or White:
http://www.boxwave.com/products/dlsleeve/at_t-tilt-designio-leather-sleeve_2906.htm
Click to expand...
Click to collapse
The "tiltflipblack" is made by PDair and is available for 1/2 that price. I've had one for several weeks and it still looks new, and I wear it every day. It's the perfect case for me.
The slimest most "pocketable" case I've found yet, is the formfitting Noreve case as seen here:
http://www.pocketpcfreak.com/archive/00006945.htm
It is also one of the very few - true - formfitting cases (using a laminated leather design, w/o the ugly and disturbing plasting cover over the KB. It protects the front and back really well, if not so much the sides. Easy to use and good workmanship.
Actually it IS meant (IMO) for pocket carrying.
Have it for about a month, still looks as new. If however looking for a drawback, then to my daily use pattern there is one. While in the case using the Kaiser/Tilt for navigation (in a cradle) needs taking it out of the case.
======
Saar
I've tried several ...
Tothotspur said:
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
2) If the slide up and tilt works fine with the case on
3) The general quality and how bulky it is in a pocket
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone
Click to expand...
Click to collapse
Just wanted to add my comments based on owning 4 different cases for the Tilt/Kaiser ...
The PDAir aluminum cased is good and pocketable. It is a little on the heavy side, but I've carried it arond now for a couple of weeks and it's all right. The downside is that there is a hard plastic protector over the touchscreen of the Tilt. You have to open the case to use the touchscreen or you have to take the hard plastic out. You can either cut out or push it out with some force, but the plastic is glued in and is under the neoprene that cushions the Tilt against the case. Not the smallest feel in the pocket, but no leather covered cardboard bulk feel. The size of this reminds me of a naked 8125 in my pocket (did that without disaster for almost 2 years).
I also tried the PDAir leather flip case. That one is definitely not pocketable unless you have some REALLY big pockets. And I'm not a big flip cover guy. Another strike is the plastic keyboard cover.
I also tried the Noreve and it's a nice leather case. I would consider this one pocketable, it's rather slim. But it has the flip cover. The good thing is that it has no plastic keyboard cover. It's a little loose when you close the cover with the snap. It's not loosely held in ... that's a good fit. But the snap doesn't hold the flip cover down as firmly as I'd like.
Lastly, I JUST snapped on one of the plastic snap-on kind. Good fit, but not sure how much the plastic will help in a fall. It snapped on tightly ... so tightly it took 15 minutes to get it off! I did not like that at all. If something goes wrong and you need to drop the battery quickly ... 'quickly' won't happen with this case. You can still use the touchscreen and it's a very tight snap on fit. Doesn't add much bulk or weight for pocket storage. NOTE: if you pick one of these up, be careful and check whether the belt clip button on the case is screw on or permanent. The permanent ones won't be pocketable.
The best feel in the pocket is the plane Tilt/Kaiser with no case. But I know I'm pushing my luck if I continue to do that. Still switching up to see what I end up liking most. Hope this info helps folks.
Tothotspur said:
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
YES!
The openings for the keypad and LCD are tappered to provide the best access to the edges but they become alittle harder to get at due to the thickness of the plastic.
2) If the slide up and tilt works fine with the case on
Yes the screen slides out and up to the normal position. The upper softkeys are silightly harder to get at when tilted due to the tickness of the plastic.
3) The general quality and how bulky it is in a pocket
Fit was tight, and snapped into place. I do not plan to use the clip as it is optional, but I will follow up with a proper review and test it out. I will get exact mesuraments later but it is not a big change and well worth the extra size.
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone
Click to expand...
Click to collapse
Yup! Cheap Too!
I will follow up with a better review tonight.
What I do not understand about using the transparent plastic snap, is why the hack would one need a case at all when all the really "pocket sensitive" components (Touch screen, Camera lens) are not covered at all... IMO if one is indiferent to this, they may not need a case at all.
I guess that all cases are kind of trade offs. Whatever protects adds bulk in the zones protected, light protection protects less than heavy armor but presents snappier use and so on.
The potentially best solution I've seen yet is actually not offered for the Tilt/Kaiser. It is made by EB Cases and called the eNovo. It is made of sturdy yet thin laminated leather, offering a form fitting case with an optional leather flip.
http://www.ebcases.com/-strse-3333/eNOVO-PAQ-6500/Detail.bok
I'm trying for some time to convince EB, Noreve and BoxWave (the ones apparently having the technology) to think about it...
Cheers,
======
Saar
thanks kahibbi and SpeedRazr for your input, i look forward to your review
SpeedRazr said:
I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
I picked this up from DayDeal.com and it didnt' fit my ATT tilt. the back does but the front will not stay on
i picked up the alum. case for travel and biking it is perfect. also from DayDeal
I wanted to know if anyone had any good or bad experiences with clear cases like this one
http://www.amazon.com/AT-Fuze-Activ..._75?ie=UTF8&s=wireless&qid=1227055029&sr=1-75
I want to get a case that will protect the fuze from drops. I drop my previous phone the 8525 twice and because I'm in a city the first drop was on one of those metal grates and the phones edges got scratched up more than I would have liked and the second time was on a concrete side walk. Both times I was pulling out my phone from my case on my hip and lost grip. I was interested in getting a case that I can pull my phone from the top. That may help prevent me losing grip. But I still want to put something on the phone incase I loss grip again and drop the phone. And I was looking for something that will not put that much bulk or take away from the looks of the phone. If anyone has any suggestions or experence with cases or skins that I can put on the phone to try and protect it from a drop I would like to read about it
I had the boxwave clear case for my 8525, and it saved my phone several times. There were a couple problems though. For starters, the gaps between the plastic and the phone get covered in dirt, and you have to remove the case to clean it out. The case snaps on to your phone will little plastic tabs. If one of those breaks, part of your case will be loose.
However, I will certainly give the case full marks for protecting my phone. It survived drops, throws, smashes, and just about everything else you can imagine would happen if a 1 year old got a hold of your phone. So, if you don't really care about the phone getting dirty and whatnot, the boxwave case provides some good protection while adding a minimal amount of bulk to the phone.
I had a case similar for my HTC Tilt and I loved it, it saved my phone several times too and it has a belt clip which I loved! Also if you get that case they have it on eBay for cheaper... I believe it was $9.99 or something like that, I was looking earlier today and saw it on there but I bought a Hot Pink Rubberized one instead. But I like the cases, of course it's your own personal preference though. Hope I'm not too late with the eBay info though lol. Here's my search link, there are a couple cases for it.
http://cell-phones.shop.ebay.com/it...=m270.l1313&_odkw=htc+touch+pro&_osacat=20336
Search for the body glove case. It is rubberized, not the best looking of cases, but might protect it the best. I bought mine on ebay.
I bought the official AT&T 2-piece case for $29.99 (-30% FAN discount).
It fits, but tabs that hold it on make the phone seem like it's going to get stuck in a half open position.
I wanted to thank everyone for there suggestions.
NotATreoFan is this the case you bought at ATT
http://forum.xda-developers.com/showthread.php?t=446555
Because thats one of the options I was thinking of or the crystal case. I'm going to The ATT store to check it out.
How do you like your case?
Thanks
rrider77 said:
I wanted to thank everyone for there suggestions.
NotATreoFan is this the case you bought at ATT
http://forum.xda-developers.com/showthread.php?t=446555
Because thats one of the options I was thinking of or the crystal case. I'm going to The ATT store to check it out.
How do you like your case?
Thanks
Click to expand...
Click to collapse
That's the case.
$1.99 free shipping.
http://forum.xda-developers.com/showthread.php?t=450611
HTC Touch Pro Case Protection
For those of you who have a Touch Pro and have the Sprint included HTC brand case, you probably have the same gripe about it as I do. There is very little protection to the side of the phone as the OEM case has several gaps in it. Also using the case for a few weeks, the velcro begins to lose its hold and the case may not shut properly. I have customized my case to fix these problems and would encourage others to do the same. Here is what you will need:
-Small elastic material (available at any craft store or Wal-Mart!)
-3M double sided tape
-Velcro strips
-5 minute epoxy (Wal-Mart)
Directions: Cut a piece of elastic the same length as the open portion of the side of the case. Cut out small pieces of double sided tape and apply to the black cross sections of the case. Apply the elastic and cut to size. For the the velcro fix on the front of the phone, cut a strip of the velcro and fit to size on the front of the case. Mix the 5 minute epoxy and apply to the back of the velcro strip you just cut. Apply the velcro to the case and allow to dry (apply pressure to ensure a tight fit). Enjoy your case!
emobileinhand.com has teamed up with Amazon and they're selling the Seidio Innocase for $24.85 shipped. I added Priority shipping and the total was $26.85. I bought my first Innocase from them but I got wasted on St. Patricks Day and broke it. The phone is fine, thank God.
The Seidio Innocase is hands down, THE BEST case for the Kaiser. The holster (strongly recommended) really keeps the device safe.
Right now, I'm using my Boxwave as a backup. I like it, but the belt clip forces you to wear it with the screen facing out which could lead to damage.
This is a great deal.
http://emobile-in-hand.amazonwebstore.com/search.htm?keyword=B0012Y4IQA
I have this case and imo its overpriced crap. The thing rarely stays on all the way. It seems there's always a corner or something to press down on again to get it to stay on it.
If you want a nice case cheap, just buy a cheapy. I bought one off Amazon for less than $5 and it stays on all the time never have to worry about it at all. The only difference is the holster and finish. The Seido has a nicer feel to it due some coating they put on it. And the holster for the cheapy is one of those screw on job's.
But hey if you want to spend $20 on a coating for something that will fall off, go ahead its on sale!!
Satisfied
I've used it for 2 weeks now and it stays on, feels great on hand, and haven't found any peeling of the rubberized layer.
I used to put on PDAir Aluminium for my SE M600 and it also go roughed up. So you can imagine my usage habit and this Seidio performs beyond my expectation.
Yea, I dunno man, I never have had a problem with my Seidio. You just have to make sure you have it on correctly. The boxwave is a very close second though. I wish Boxwave had a holster similar to Seidio's.
The great thing about the Boxwave is that it has a "notch" for the reset hole so it's almost impossible to miss and end up messing up your USB port.
-haze- said:
Yea, I dunno man, I never have had a problem with my Seidio. You just have to make sure you have it on correctly.
Click to expand...
Click to collapse
I don't know how someone could fit it on incorrectly. It only goes on one way and its pretty obvious which way that is.
My biggest problem w/the case is that if i slide that keyboard out it will knock off the bottom hinges.
IMO its not a secure case. Is it designed well as far as all the little notches and slots? Yes. Does it feel nice in your hand? Yes. Does it look nice? Yes. Is it worth more than $5? No.
Is this really much different to the 'crystal cases' that you can buy from the markets and crack after a week in your pocket?
Dont u dare!
Dont even think about buying this pathetic case. after much debate i bought this hoping it would protect my kaiser. i spent a week looking for the perfect case, went through everything i could find. i received the case, it snapped on easily, i hardly had an issue with the little hinges, the case lasted me a good 18 months. the rubberised outside is a nice touch, imo the phone doesnt look good with the case, but i stuck with it coz it protects your phone, right? well not quite. what the assholes at seidio dont tell you is that yeah they've rubberised the outside but done nothing inside the case. its plastic, which means after a couple of months you start to accumulate **** inbetween the case and the outside of the fone. ordinarily it might not be a problem, but if like me the fone spends most of its time in the back pocket, in bags etc then any grainy kind of crap between a plastic cover and a kaiser = ? you guessed it, major dents, scratches, gouges etc. i didnt check the phone for a good 3 months after i put the cover on, when i took it back off my phone looked like id rolled it down a hill and then threw it back up again. its ruined my kaiser and now i cant sell it on unless i buy another housing and put it on myself. it may be error on my part assuming that a protective case protects the outside of your fone, i dont know. this is my experience of this ****ty case, take it or leave. i think you'd be better off buying the cheapy crystal ones, coz then atleast you can see when your phone needs cleaning and you dont end up ruining it.
sorry for going on and on.
paradoox
Thanks for your feedback paradoox,
anyone else have similar long term reports?
On a separate note, i found out that Boxwave do a very similar (nearly identical) case and holster. Anyone handled both the Seidio and Boxwave for a comparison?
yep thats pretty much what i thought
paradoox said:
Dont even think about buying this pathetic case. after much debate i bought this hoping it would protect my kaiser. i spent a week looking for the perfect case, went through everything i could find. i received the case, it snapped on easily, i hardly had an issue with the little hinges, the case lasted me a good 18 months. the rubberised outside is a nice touch, imo the phone doesnt look good with the case, but i stuck with it coz it protects your phone, right? well not quite. what the assholes at seidio dont tell you is that yeah they've rubberised the outside but done nothing inside the case. its plastic, which means after a couple of months you start to accumulate **** inbetween the case and the outside of the fone. ordinarily it might not be a problem, but if like me the fone spends most of its time in the back pocket, in bags etc then any grainy kind of crap between a plastic cover and a kaiser = ? you guessed it, major dents, scratches, gouges etc. i didnt check the phone for a good 3 months after i put the cover on, when i took it back off my phone looked like id rolled it down a hill and then threw it back up again. its ruined my kaiser and now i cant sell it on unless i buy another housing and put it on myself. it may be error on my part assuming that a protective case protects the outside of your fone, i dont know. this is my experience of this ****ty case, take it or leave. i think you'd be better off buying the cheapy crystal ones, coz then atleast you can see when your phone needs cleaning and you dont end up ruining it.
sorry for going on and on.
paradoox
Click to expand...
Click to collapse
I had a similar experience as paradoox, bought it, thought it looked crap but left it on to protect fone, few weeks later discovered one of the little little tabs holding the top half of the case on snapped so it wouldn't stay on.. this is when i found scratches and dents under the case too. imo ... the case is just too expensive for how it performs... better to go thu 3 cheapies i think..
It all depends on your usage and carry habit.
I carry my phone on a leather pouch on my belt, with the Seidio snuggly fit on it, so it won't slip whatsoever.
It does make sense that some grits, etc. will get under the case, but I just opened it up 1-2 weeks ago and found nothing. Remember, I live in Jakarta, taking public buses and lots of fumes, dust, etc. around the air.
Of course it has to be also counted that I rarely open my phone in public (dusty, windy area) mainly for security reasons. I don't flaunt my belongings. I worked in an office building, and the phone is often out, but it's a clean environment.
Again, YMMV. For someone who wants no dust, I read somewhere there's a waterproof case for Kaiser ..
For my use, Seidio works great.
Wondering if the Tetrax magnet will hold Nexus 4 at the back?
http://www.tetrax.com/us/
I have this for my Galaxy Nexus, but I had to stick a metal at the back. Because I want to use the wireless charging in the future, I don't think its a great idea to stick the small metal at the back of the phone.
I'm not sure if the Nexus 4 actually have enough (metal/something magnetic) on the back of the inside of the phone to stick on the magnet? Not sure anyone tried this. Because I dropped my Galaxy Nexus and cracked it(in Canada), I'm still waiting to order one!
I'm so use to using this stuff, its really hard to go back to using a car holder.
If anyone know if this one would stick to a magnet, please let me know! Thanks.
I have no familiarity with that product but I just took the strongest magnet off of my fridge (holding up a 1lb whiteboard on there so it's not "industrial" strength but it's not a super weak one either) and I could barely feel the pull between it and my N4. In fact, now that I've done this, I'm concerned that it will be very difficult for them to make the Orb hold this phone at an angle without it sliding off.
Based on this and what I know of that product, I wouldn't expect it to work. That said, I'm not sure how super powerful that magnet is so it's kinda hard to say for sure.
HTH
I think a solution would be to put the metal on a TPU case like the Rearth Ringke Slim and then if you don't want to use the case daily, just leave it magnetized to the Tetrax in your car. That way you just created a dock for yourself in the car to use, a case if you want to use it, and you can even put a NFC tag on the case so that whenever you "dock" it in your car, it activates whatever car mode features you want.
facetubespam said:
I think a solution would be to put the metal on a TPU case like the Rearth Ringke Slim and then if you don't want to use the case daily, just leave it magnetized to the Tetrax in your car. That way you just created a dock for yourself in the car to use, a case if you want to use it, and you can even put a NFC tag on the case so that whenever you "dock" it in your car, it activates whatever car mode features you want.
Click to expand...
Click to collapse
That's what I plan to do when my nexus arrives. I have my GNex set up this way with Incipio Feather case, but I don't leave it on the magnet.
aichemist said:
Wondering if the Tetrax magnet will hold Nexus 4 at the back?
http://www.tetrax.com/us/
I have this for my Galaxy Nexus, but I had to stick a metal at the back. Because I want to use the wireless charging in the future, I don't think its a great idea to stick the small metal at the back of the phone.
I'm not sure if the Nexus 4 actually have enough (metal/something magnetic) on the back of the inside of the phone to stick on the magnet? Not sure anyone tried this. Because I dropped my Galaxy Nexus and cracked it(in Canada), I'm still waiting to order one!
I'm so use to using this stuff, its really hard to go back to using a car holder.
If anyone know if this one would stick to a magnet, please let me know! Thanks.
Click to expand...
Click to collapse
I've tried this with the Nexus 4 and the metal plates some right off of the glass back when you try to mount it on the XWAY. I'm looking for a solution to this. I love the XWAY and used it for quite a while with my SGS2. It was great with that but the Nexus 4's glass back is so smooth anything you stick on it will come off fairly quickly.
I am in the same boat, the stupid metal won't stick at the back. I'm going to contact my friend at 3m to see if they have any other double side tape that would work, I don't want to use something too strong that I can't pull it back out and not break the back glass =(
Why not put a screen protector on the back and then the metal thing on that?
Let's you still see the back, and when you want to remove the metal thing, you won't have to worry about hurting the phone.
aichemist said:
I am in the same boat, the stupid metal won't stick at the back. I'm going to contact my friend at 3m to see if they have any other double side tape that would work, I don't want to use something too strong that I can't pull it back out and not break the back glass =(
Click to expand...
Click to collapse
I'm thinking of getting one of the dBrad Black Carbon skins then sticking the XWAY plate on it. The reviews say it sticks really well to the Nexus 4's glass back.
http://dbrand.com/submodels/nexus-4
Although I might just take some super glue or something to assist the XWAY plate in adhering to the glass.
budbear1 said:
I'm thinking of getting one of the dBrad Black Carbon skins then sticking the XWAY plate on it. The reviews say it sticks really well to the Nexus 4's glass back.
http://dbrand.com/submodels/nexus-4
Although I might just take some super glue or something to assist the XWAY plate in adhering to the glass.
Click to expand...
Click to collapse
FYI - I took some super glue gel and glued the XWAY mount to the back of my Nexus 4, waited a couple hours for the glue to cure and it's working fine now. I figure I can always take a razor blade and scrape it all off sometime if the future since it's glass, after all. I can't say if it will work long term, it's stuck on there good and tight now. Cheers!
The metal plate slips off the back of my N4 too. I contacted Tetrax with no reply. So much for that.
any update for this? it seems that on website Nexus4 is supported:
"Suitable for the LG Google Nexus 4"
http://www.buybits.com/Product/1653...visible-Attraction-Phone-Mount-sku-16535.aspx
i'm wondering if it's a special metal pin with special glue or it's the standard one
pgr1979 said:
any update for this? it seems that on website Nexus4 is supported:
"Suitable for the LG Google Nexus 4"
http://www.buybits.com/Product/1653...visible-Attraction-Phone-Mount-sku-16535.aspx
i'm wondering if it's a special metal pin with special glue or it's the standard one
Click to expand...
Click to collapse
It's the same, just a website lying on its product. It don't works well with nexus 4's back.... The only sollution is glue or phone case...
Err0r-4o4 said:
It's the same, just a website lying on its product. It don't works well with nexus 4's back.... The only sollution is glue or phone case...
Click to expand...
Click to collapse
What about between the phone and case?- or is it too thick....
ddiehl said:
What about between the phone and case?- or is it too thick....
Click to expand...
Click to collapse
After getting it, i can assume that an 1mm sylicone case between magnet and chip on phone wont be stable, not strongh enough.
Btw, even Glue (superglue 3 universale) had some troubles to hold chip on phone (Our nexus is too smart to be glued^^).