My s10 plus is stuck on download mode and has a black screen with text when I try to boot it. I used the original factory unlocked firmware but no luck, I tried samsung emergency restore with smart switch but it doesnt recognize the phone. I even used different versions of the software and odin but still no luck. Anyone know what's going on?
Images:
ht tps://ibb.co/3rDvhPs
ht tps://ibb.co/myLzhcy
did you unlocked OEM before you flashed?
Did your phone's model number and the update file's model number match?
Yes, the phone is factory unlocked and I matched the correct model which is SM-G975U1
Have you tried a Factory Reset?
Related
So i have G935A galaxy s7 edge att 32gb model, and when i was about to unroot my device, i got a [aboot] fuzed 4 > Binary 1 then i got an erro has ocurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software. I was running a custom rom, and so smart switch said my phone was unsupported when plugged in, i tried manually typing in model number and s/n. Smart Switch crashed. I dont know what else to do and am hella stressed.
UPDATE: I got the phone out of that because i couldnt turn it off, it would flash black screen. now it is stuck in recovery mode and im like freaking out
UPDATE 2: phone got ****ed and att replaced it haha thanks to everyone who tried to help
I've used Samsung Kies in the past to get me out of a couple jams. Try the emergency firmware recovery using that software and see how that goes. Not sure if its the same recovery that's in Smart Switch. Never used Smart Switch.
morganmiranda said:
So i have G935A galaxy s7 edge att 32gb model, and when i was about to unroot my device, i got a [aboot] fuzed 4 > Binary 1 then i got an erro has ocurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software. I was running a custom rom, and so smart switch said my phone was unsupported when plugged in, i tried manually typing in model number and s/n. Smart Switch crashed. I dont know what else to do and am hella stressed.
UPDATE: I got the phone out of that because i couldnt turn it off, it would flash black screen. now it is stuck in recovery mode and im like freaking out
Click to expand...
Click to collapse
Can you get to download and if so Odin back to your stock firmware.
"Zed? Zed's dead baby Zed's dead"
Sent from my Echoe Powered Official Nougat G935f
Try download mode and flashing via odin
theorioles33 said:
I've used Samsung Kies in the past to get me out of a couple jams. Try the emergency firmware recovery using that software and see how that goes. Not sure if its the same recovery that's in Smart Switch. Never used Smart Switch.
Click to expand...
Click to collapse
i tried kies, would glitch out and keep sayin enter model number when i already did
As said above, use Odin and flash original firmware.
I got an error once when flashing stock firmware, then I wiped the phone from stock recovery, and that worked.
Almost impossible to brick a phone with locked bootloader. Odin always work.
Helo Guys i want to try re flash firmware 5.1.1 on s6 edge+ (all methods tried but failed) plz help me.
Method Tried
Samsung Smart Swtich ( Error Please check model name or s/n and enter again)
Tried odin3 almost all version failed ( screen shot attached) with error.
and one thing more i want to share you that my device showing me model name SM-G928F in software info and on other hand it showing me model SM-G928A in downloading Mode.
please guys help how to restore it on stock firmware
Did u go to settings>about phone, tap build # 7 times, go to settings>developer options>enable OEM unlock?
yes tried failed.
Are you trying to downgrade from marshmallow?
furqansaeed18 said:
Helo Guys i want to try re flash firmware 5.1.1 on s6 edge+ (all methods tried but failed) plz help me.
Method Tried
Samsung Smart Swtich ( Error Please check model name or s/n and enter again)
Tried odin3 almost all version failed ( screen shot attached) with error.
and one thing more i want to share you that my device showing me model name SM-G928F in software info and on other hand it showing me model SM-G928A in downloading Mode.
please guys help how to restore it on stock firmware
Click to expand...
Click to collapse
so which one is actually your device?
AT&T's or the other?
other
maybe it's failing cause it needs the actual odin files for SM-G928A...
Sent from my SM-G925F using Tapatalk
I purchased handset from market the model is sm-G928f and the software installed showing me sm-g928a in recovery mode and in download mode.
Hello everybody, I have a huge problem removing frp from this tablet. It came with last firmware T580XXU3BRF1
What I have tried:
flashing combination T580XXU3ARG1, combination flash ok; I have flashed after that T580XXU3BRF1_T580PHE3BRF1_PHE; T580XXU3BRF1_T580OXA3BRF1_DBT; T580XXU3BRF1_T580BTU3BRF1_BTU frp remains.
also tried combination, then ABD frp remove from octopus, flash sboot, boot, system, recovery, cache, and after reboot I get device storage corrupt.
Tried UART option from octopus, I get sboot version not supported. Tried downgrading sboot; I get device 3 binnary 2;
Tried flashing only boot from combination to get to ABD I got stuck on black screen after samsung logo.
Tried flashing boot from combination and I get tablet recognized by pc abd on so I tried octopus abd frp option, then reflashed original boot and I get same device storage corrupt.
Tried FRP factory services from octopus. payed service; it doesnt recognize tablet
Every try to downgrade fails device 3 binary 2
I am at dead end now, there are few releases of new firmware and I have tried them all; downgrade imposible, other methods wont work...
Any advice appreciated I have all recent tools z3x; octopus chimera, infinity etc?
I'm sorry for bad english; greetings from France.
nesafox89 said:
hello everybody, i have a huge problem removing frp from this tablet. It came with last firmware t580xxu3brf1
what i have tried:
Flashing combination t580xxu3arg1, combination flash ok; i have flashed after that t580xxu3brf1_t580phe3brf1_phe; t580xxu3brf1_t580oxa3brf1_dbt; t580xxu3brf1_t580btu3brf1_btu frp remains.
Also tried combination, then abd frp remove from octopus, flash sboot, boot, system, recovery, cache, and after reboot i get device storage corrupt.
Tried uart option from octopus, i get sboot version not supported. Tried downgrading sboot; i get device 3 binnary 2;
tried flashing only boot from combination to get to abd i got stuck on black screen after samsung logo.
Tried flashing boot from combination and i get tablet recognized by pc abd on so i tried octopus abd frp option, then reflashed original boot and i get same device storage corrupt.
Tried frp factory services from octopus. Payed service; it doesnt recognize tablet
every try to downgrade fails device 3 binary 2
i am at dead end now, there are few releases of new firmware and i have tried them all; downgrade imposible, other methods wont work...
Any advice appreciated i have all recent tools z3x; octopus chimera, infinity etc?
I'm sorry for bad english; greetings from france.
Click to expand...
Click to collapse
hi where did you get combination file - provide link to try and will update you with result.
chopwell20 said:
hi where did you get combination file - provide link to try and will update you with result.
Click to expand...
Click to collapse
I bough it from gem flash I think, I'm going to upload it and I'll post a link today.
nesafox89 said:
I bough it from gem flash I think, I'm going to upload it and I'll post a link today.
Click to expand...
Click to collapse
mediafire com/file/ocgohafnt5ntf77/COMBINATION_FA60_T580XXU3ARG1_CL10816856_QB18828314_REV00_user_mid_noship.tar.zip/file
add dot after mediafire
Flash with combination and FRP reset via UART vith octopus.
yoya said:
Flash with combination and FRP reset via UART vith octopus.
Click to expand...
Click to collapse
Hvala zemljace probacu kasnije.
I'm trying to remove the frp on this. I don't have a box or anything to help me. What are my options?
Was any solution ever found on this?
Hello guys. I know there are many topics about this, but I need a help about my Samsung Galaxy S8 (normal one, not Plus or Edge) G950F.
I tryed many method and I saw many videos and guides, but still it doesnt work.
My Galaxy S8 is brand with Tim (Italy) so I dunno if this could create issues or not.
I downloaded Combination Firmware 8.0 but I always have the error "SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 2, BINARY: 1" on Mobile and Fail on Odin... this just can mean that the Combination Firmware isnt the right one.
I downloaded the right 8.0 Tim Original Firmware and tryed with Odin. It pass and everything go well, but still ask me for the old Account Gmail to verify the Account etc even if Odin did good.
I guess that I need to use that Combination first and put USB Debug (as I'm seeing in many videos) but I can't put this Combination Firmware for the error I said above.
What can I do? What is the right Combination file for a Galaxy S8 8.0 Tim (Italy)? I can't now naither turn on the device because it says to me in loop "An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC Software" in a green screen.
Thanks for any help you can give. I just want use back this mobile.
Did you tried to boot in download mode and then use smart switch ? Smart switch can recognize a phone when you boot at recovery. Then try to repair.
Concerning the combination this error mean that the combination file are too old. I had the same issue long time ago ( Device 2 Binary 1).
What mean the Google Gmail thing ? At boot they ask you the mail ? Why don't enter it then ?
Tell me if something worked. Try to find a newer "combination".
SoDeadly said:
Did you tried to boot in download mode and then use smart switch ? Smart switch can recognize a phone when you boot at recovery. Then try to repair.
Concerning the combination this error mean that the combination file are too old. I had the same issue long time ago ( Device 2 Binary 1).
What mean the Google Gmail thing ? At boot they ask you the mail ? Why don't enter it then ?
Tell me if something worked. Try to find a newer "combination".
Click to expand...
Click to collapse
I can't enter the Account Verification because the one who used this phone wont tell me the email and psw for it (he was the partner of my mom, but now they fighted and my mom wanted back her's phone.. but now, for vengeance/spite he wont tell us his data). I knew about Combination was old but where can I find the newer one? I am surfing on internet and can't find the right one I tryed many). My Firmware code is 8.0.0/R16NW/G950FXXU2CRED so I need a Combination Firmware eligibile with that.
I cant access the Device to install Smart Switch etc.
You don't need to access to the device. Just download the Samsung utility on your computer and connect your phone thought the download mode.
The name of the Samsung thing is Samsung Kies or something like that. Search for it.
And actually I never saw a phone asking for account verification ... I can't really help if this method don't work.
---------- Post added at 02:08 PM ---------- Previous post was at 02:07 PM ----------
Or, flash twrp. Obviously the warranty will trip. And then delete everything, also the system. Then install back the firmware through Odin
Naruke said:
Hello guys. I know there are many topics about this, but I need a help about my Samsung Galaxy S8 (normal one, not Plus or Edge) G950F.
I tryed many method and I saw many videos and guides, but still it doesnt work.
My Galaxy S8 is brand with Tim (Italy) so I dunno if this could create issues or not.
I downloaded Combination Firmware 8.0 but I always have the error "SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 2, BINARY: 1" on Mobile and Fail on Odin... this just can mean that the Combination Firmware isnt the right one.
I downloaded the right 8.0 Tim Original Firmware and tryed with Odin. It pass and everything go well, but still ask me for the old Account Gmail to verify the Account etc even if Odin did good.
I guess that I need to use that Combination first and put USB Debug (as I'm seeing in many videos) but I can't put this Combination Firmware for the error I said above.
What can I do? What is the right Combination file for a Galaxy S8 8.0 Tim (Italy)? I can't now naither turn on the device because it says to me in loop "An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC Software" in a green screen.
Thanks for any help you can give. I just want use back this mobile.
Click to expand...
Click to collapse
The combination firmware needs to match the current firmware of the phone. Example if you have CRC7 then you need combination firmware CRC7
Please help, can't find combination file for sm-g9500 for latest upgrades. Firmware G9500ZHU2CRE1
Hello guys,
just received S7 (G930V) and I need to fix it. previous owner tried to flash exynos? rom onto it so now im stuck here (see image) I can¨t use ODIN, because it didnt recognize this device, (but Korean 930s does) and even it restarting automatically every few seconds and its shows "This is old binary, please update latest binary! (boot.img)"
Can you help me with this please?
SkopiX said:
Hello guys,
just received S7 (G930V) and I need to fix it. previous owner tried to flash exynos? rom onto it so now im stuck here (see image) I can¨t use ODIN, because it didnt recognize this device, (but Korean 930s does) and even it restarting automatically every few seconds and its shows "This is old binary, please update latest binary! (boot.img)"
Can you help me with this please?
Click to expand...
Click to collapse
Install all needed drivers, and dowload latest firmware here's link (you can try to flash universal snapdragon firmware):
Download Samsung Galaxy S7 SM-G930U USC USA (US Cellular) G930UUES8CRK1 firmware
Fast download latest Samsung Galaxy S7 firmware SM-G930U from USA (US Cellular) with G930UUES8CRK1 and Android version 8.0.0
www.sammobile.com
Thank you for your reply, but I cant flash new fw because my PC dont see phone and phone itself cant go to .proper download mode, only to this fail screen. I have drivers installed and PC and odin sees other galaxy s7 so its probably not driver issue..
SkopiX said:
Thank you for your reply, but I cant flash new fw because my PC dont see phone and phone itself cant go to .proper download mode, only to this fail screen. I have drivers installed and PC and odin sees other galaxy s7 so its probably not driver issue..
Click to expand...
Click to collapse
What is your Odin version???
Try this one:
Odin3 v3.12 (PrinceComsy).zip | Tool by psouza4 for Galaxy S7
PrinceComsy's Odin3 v3.12 hash skip version.
androidfilehost.com
I tried this one, but still, if I cant go to download mode, how can odin flash anything? So still no succes
SkopiX said:
I tried this one, but still, if I cant go to download mode, how can odin flash anything? So still no succes
Click to expand...
Click to collapse
If you press power more than 10 sec. and press vol- + home it drops you back to this mode???
yes, EVERY action ends on this screen if I hold power more than 1 sec +-, it just restarting and restarting...
Hey guys, just a fast info:
I bought this special cable from aliexpress
https://www.aliexpress.com/item/32966775653.html?spm=a2g0s.9042311.0.0.32dd4c4dxNJCmM
thanks to this I could boot into DL mode (which I couldnt before) and I flashed newest USA FW with odin
So now, its working!