Related
Motorola XT1563 Bricked
Hi guys, a Motorola XT1563 ( moto x play) was bricked. I try flash a original rom via rsd lite software and fastboot console cmd. No sucess because a bootloader is locked. I have make this steps in the support site oficial of Motorola for get the unike key and done. But... I try send comand fastboot oem unlock (code) when said:
...
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
finished. total time: 0.004s
Well, this phone was bricked and don't boot... Why i check this setting if device didn't power on????
A biggest error of development i think.
Someone help me to find a solution?
Jhornands said:
Motorola XT1563 Bricked
Hi guys, a Motorola XT1563 ( moto x play) was bricked. I try flash a original rom via rsd lite software and fastboot console cmd. No sucess because a bootloader is locked. I have make this steps in the support site oficial of Motorola for get the unike key and done. But... I try send comand fastboot oem unlock (code) when said:
...
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
finished. total time: 0.004s
Well, this phone was bricked and don't boot... Why i check this setting if device didn't power on????
A biggest error of development i think.
Someone help me to find a solution?
Click to expand...
Click to collapse
Can you boot into fastboot mode?
If yes...then boot into fastboot mode and reflash stock firmware using fadtboot commands
droider007 said:
Can you boot into fastboot mode?
If yes...then boot into fastboot mode and reflash stock firmware using fadtboot commands
Click to expand...
Click to collapse
For this i need unlock bootloader.
Example:
Device in fastboot mode
Conected in pc
Command in console cmd:
fastboot flash recovery recovery.img
Then
(Bootloader) preloader
FAILED (remote failure)
Errors..
I need help to unlock bootloader of device whitout check allow oem unlock in device because it no power on!!!
Check how to boot (not flash) to TWRP from fastboot. When you get into TWRP do a Factory Reset and reboot.
mausv said:
Check how to boot (not flash) to TWRP from fastboot. When you get into TWRP do a Factory Reset and reboot.
Click to expand...
Click to collapse
fastboot boot recovery.img
Jhornands said:
Motorola XT1563 Bricked
Hi guys, a Motorola XT1563 ( moto x play) was bricked. I try flash a original rom via rsd lite software and fastboot console cmd. No sucess because a bootloader is locked. I have make this steps in the support site oficial of Motorola for get the unike key and done. But... I try send comand fastboot oem unlock (code) when said:
...
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
finished. total time: 0.004s
Well, this phone was bricked and don't boot... Why i check this setting if device didn't power on????
A biggest error of development i think.
Someone help me to find a solution?
Click to expand...
Click to collapse
same issue with me any solution for this.?
m not able to flash stock firmware it says
E:footer
E:signature failure
and when m unlocking boot loder it says oem unlock error
anujanuj said:
same issue with me any solution for this.?
m not able to flash stock firmware it says
E:footer
E:signature failure
and when m unlocking boot loder it says oem unlock error
Click to expand...
Click to collapse
someone found the solution:?
What error in bootloader log?
Enviado desde mi XT1563 mediante Tapatalk
Can you, at least, boot in stock recovery mode? If you can already boot in fastboot mode, you can use volume up and down keys to toggle between all the options, toggle it until you see "Recovery mode" and then push power button. Your phone will reboot in recovery mode and an option to do factory reset should be there. Stock recovery is less powerful than TWRP recovery but, it if you have a hard time installing TWRP, it could be another solution.
OTA possibly flashing, pushing the sd fastboot
Enviado desde mi XT1563 mediante Tapatalk
check this for enable
http://android.stackexchange.com/qu...ndroid-if-forgotten-pattern-for-screen-unlock
flopezm said:
check this for enable
http://android.stackexchange.com/qu...ndroid-if-forgotten-pattern-for-screen-unlock
Click to expand...
Click to collapse
what if phone shows internal and external memory not mounted
fix of hardbikd ....
here u go ...1st go fastboot mode n flash the stock file on fastboot mode the ...press power bottom 20 time fastly then u see warning bootloder logo the wait 5min after completing go 2 developsr allow oem ........
anujanuj said:
what if phone shows internal and external memory not mounted
Click to expand...
Click to collapse
Can you explain?
Sent from my XT1562 using Tapatalk
K.khiladi said:
Can you explain?
Sent from my XT1562 using Tapatalk
Click to expand...
Click to collapse
nothing this is too old post now my issue is solved
anujanuj said:
nothing this is too old post now my issue is solved
Click to expand...
Click to collapse
Mate your posts are everywhere on the forum.. ??
Sent from my XT1562 using Tapatalk
K.khiladi said:
Mate your posts are everywhere on the forum..
Sent from my XT1562 using Tapatalk
Click to expand...
Click to collapse
yes because my phone was dead and i had fade up
Jhornands said:
Motorola XT1563 Bricked
Hi guys, a Motorola XT1563 ( moto x play) was bricked. I try flash a original rom via rsd lite software and fastboot console cmd. No sucess because a bootloader is locked. I have make this steps in the support site oficial of Motorola for get the unike key and done. But... I try send comand fastboot oem unlock (code) when said:
...
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
finished. total time: 0.004s
Well, this phone was bricked and don't boot... Why i check this setting if device didn't power on????
A biggest error of development i think.
Someone help me to find a solution?
Click to expand...
Click to collapse
Just get flash stock android 5.1.1 rom from fastboot if that doesn't work try getting into recovery mode and flashing the stock rom via adb sideload.
motorola x play ...stuck in boot
I am using a Motorola X Play 32 Gb Dual Sim phone with a Marshmallow 6.0.1
I'm now stuck at bootup with Start Up Failed.
Startup failed Error
your device didn't start up successfully
use the software repair assistant on computer
to repair ur device.
connect ur device to your computer to get
the software repair assistant
AP fastboot flash mode (Secure)
hab check failed for boot
Failed to verify hab image boot
failed to validate boot image
Error: failed to pass validation. backup to fastboot
Fastboot Reason: Fall-through from normal boot mode
pls Help by step by step methods I am Stuck.....Please
scorpionking3010 said:
I am using a Motorola X Play 32 Gb Dual Sim phone with a Marshmallow 6.0.1
I'm now stuck at bootup with Start Up Failed.
Startup failed Error
your device didn't start up successfully
use the software repair assistant on computer
to repair ur device.
connect ur device to your computer to get
the software repair assistant
AP fastboot flash mode (Secure)
hab check failed for boot
Failed to verify hab image boot
failed to validate boot image
Error: failed to pass validation. backup to fastboot
Fastboot Reason: Fall-through from normal boot mode
pls Help by step by step methods I am Stuck.....Please
Click to expand...
Click to collapse
same thing for me, been weeks cant find any solution
Hey guys.... I have a Motorola xt1563 dual sim. A week ago I was trying to flash my phone with this rom:
XT1563_LUX_RETCA_5.1.1_LPD23.118-10_cid14_subsidy-DEFAULT_CFC.xml
But unfortunelly doesn't boot. The display only show me a text:
AP Fastboot Flash Mode (Secure)
failed to validate system image
ERROR: Failed to pass validation, backup to fastboot
Fastboot Reason: Fall-through from charger boot mode
My phone is not unlocked and no root.
I really don't know what to do, anybody can help me? Any idea?
Thanx a lot....
cybergonvergalarga said:
Hey guys.... I have a Motorola xt1563 dual sim. A week ago I was trying to flash my phone with this rom:
XT1563_LUX_RETCA_5.1.1_LPD23.118-10_cid14_subsidy-DEFAULT_CFC.xml
But unfortunelly doesn't boot. The display only show me a text:
AP Fastboot Flash Mode (Secure)
failed to validate system image
ERROR: Failed to pass validation, backup to fastboot
Fastboot Reason: Fall-through from charger boot mode
My phone is not unlocked and no root.
I really don't know what to do, anybody can help me? Any idea?
Thanx a lot....
Click to expand...
Click to collapse
the problem is so flashing diferent firmware or downgrade you need bootloader unlocked
i do it...
aldoblq said:
the problem is so flashing diferent firmware or downgrade you need bootloader unlocked
Click to expand...
Click to collapse
Aldo.
I do it, I try to unlock this device but nothing happends.
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
finished. total time: 0.053s
Do you have any other idea? Thanks, man.
I assume you have a mexican or brazilian XT1563 the firmware you used is not made for it. I looked around and found a file factory page
http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=100&page=1
My BLIND guess is
XT1563_LUX_RETLA-IUSMX_5.1.1_LPD23.118-6.2_cid12_subsidy-IUSMXLA_CFC.xml.zip
this based on the IUSMX (which I assume means U.S and MEX)
Again it is a blind guess so double check, then triple check and proceed with caution.
not sure if I can actually link out to another page if not mod let me know and I'd be happy to take it down. Otherwise I have previously stumbled upon some forums in Spanish and Portuguese which point to the right firmware. I'd suggest look into those as well.
As usual google is your friend.
Hope it helps.
hey Joeanca....
I read your comment and that's true I have a Mexican XT1563, I will download all the firmwares and I try it, thats interesting.
About your blind questions.
IUSMXLA means
IUSACELL (name of the cellphone Company)
MX means Mexico
LA means Latinamerica
I will do it with caution, but let me explain you. I even downloaded the original firmware from motorola's webpage and also follow the instructions but nothing happends, the phone still show me the bootloader options with this message.
AP Fastboot Flash Mode (secure)
failed to validate system image
ERROR: Failed to pass validation, backup to fastboot
Fastboot Reason: Fall-through from normal boot mode
I'm not sure what's happening. And you say it, google it's a great tool, but I have a week searching for a solution but I can't find it.
Thanks for the advice Joeanca. Have a nice day. And if you know any other idea please let me know.
Go to About Phone in Settings.
Then click build number 6-9 times until it shows 'you are now a developer'.
Then go to Settings > Developer Options and select OEM unlock.
Then unlock you bootloader.
Flash a custom recovery (TWRP).
After that root your device.
And finally flash a custom rom.
Hey Sid.X
When I turn on the phone only shows the display in recovery mode, unfortunelly I can't do it all con can say. And the phone can't load Android, so that´s the problem. I can't find the solution because my phone is not working. I try to install the original rom from motorola's web page and nothing happends.
The phone also is oem locked and never root, and I buy it 2 months ago.
Do you have any other idea? Thanks for the advice, I hope somebody can help me.
All comments will be wellcome.
Thanks anyway, have a good day.
Hi, cybergonvergalarga.
You could fix your cell phone? I have the same problem.
Thank you
cybergonvergalarga said:
When I turn on the phone only shows the display in recovery mode, unfortunelly I can't do it all con can say. And the phone can't load Android, so that´s the problem. I can't find the solution because my phone is not working. I try to install the original rom from motorola's web page and nothing happends.
The phone also is oem locked and never root, and I buy it 2 months ago.
Do you have any other idea? Thanks for the advice, I hope somebody can help me.
All comments will be wellcome.
Thanks anyway, have a good day.
Click to expand...
Click to collapse
how were you flashing RSD LITE or manually??? dis you flash bootloader. bin and gpt.bin ??
if you have the bootloader blocked even have guarantee of purchase go claim it...
about warranty thing...they are saying motherboard is locked...they have to change it...which cost too much...also try using RSDLite...I am having same problem but RSD Lite could not recognise my device...Try fix it through varizon wireless repair assistant...If that doesn't work too let me know which version of firmware you were using before you did this to your phone.
same issue
aldoblq said:
the problem is so flashing diferent firmware or downgrade you need bootloader unlocked
Click to expand...
Click to collapse
bro can u send me the link file i has the same issue to my phone
bro even me ...facing same problem.....help
encontraron alguna solucion tengo el mismo problema? necesito ayuda urgente
solution
sinaloa080409 said:
encontraron alguna solucion tengo el mismo problema? necesito ayuda urgente
Click to expand...
Click to collapse
Original:
surch for:
"Já está no ar a nova atualização para o nosso Moto X Play XT1563 para o Android 6.0.1 do começo do mes de março/2016."
This forum does not allow me to post link ...
Failed to boot, not access to operative system, recovery or any tool
Hi, I only can turn on my phone on Fastoboot mode, I format all system but this system don't boot because I install a wrong firmware. When I try to install any firmware launches error.
I have the unlock code but when I try to unlock I receive this message
...
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
finished. total time: 0.012s
I can't launch the OS to enable this feature, is possible to unlock bootloader bypassing this flag?
People need help. Sorry if'm posting in the wrong place, I'm new here.
I have a Moto X Play (XT1563) And after I flash it to the stock rom 6.0 he installed it right more at the time of restart he did not call more, no charges and no starts in fastboot.
The bootloader it was unlocked, and the battery was at 20% load.
When I plug it in the PC it is recognized as UNKNOWN DEVICE. What I do to try to recover it? as seen videos of people recovering MOTO G1 AND 2, MOTO X 1 and 2. Thank you in advance!
Rwaan said:
People need help. Sorry if'm posting in the wrong place, I'm new here.
I have a Moto X Play (XT1563) And after I flash it to the stock rom 6.0 he installed it right more at the time of restart he did not call more, no charges and no starts in fastboot.
The bootloader it was unlocked, and the battery was at 20% load.
When I plug it in the PC it is recognized as UNKNOWN DEVICE. What I do to try to recover it? as seen videos of people recovering MOTO G1 AND 2, MOTO X 1 and 2. Thank you in advance!
Click to expand...
Click to collapse
1st thing is please Charge your moto x play First ,it must be charged at least 50%
2nd I cant understand what u want to say .
So, Please calm Down and Explain It.
xpectedme094 said:
1st thing is please Charge your moto x play First ,it must be charged at least 50%
2nd I cant understand what u want to say .
So, Please calm Down and Explain It.
Click to expand...
Click to collapse
My bike x play does not turn over and not charge or enter the fastboot mode, I was in the custom rom RR 6.0 went back to the stock and the battery was only 20% used the following commands FlashFile file in cmd ...
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot reboot
* q in the last command is to restart it hung up and did not care anymore.
Rwaan said:
My bike x play does not turn over and not charge or enter the fastboot mode, I was in the custom rom RR 6.0 went back to the stock and the battery was only 20% used the following commands FlashFile file in cmd ...
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot reboot
* q in the last command is to restart it hung up and did not care anymore.
Click to expand...
Click to collapse
If its not charging then there might be problem in your Charging Jack.
First press power Button ( Around 10 sec ) When Screen Off Immediately press Power and Volume less Button.
Bootloader Mode opens .
Connect Your Charger and Check whether Charger Connected or Not ??
Now
I
Came To Your Question * q in the last command is to restart it hung up and did not care anymore. ??
When You Command " fastboot reboot " it hang up to " Bootloader unlock Screen" Its Because might be While Flashing TWRP You by mistakely Remove Your "Boot Image" and Thats Why your Mobile Hang Up.
You should Also Note That All Moto X Play dont have same Boot Image .
You First Need To Download Boot Image Flash It Then Your Problem will sohrtout For Sure.
xpectedme094 said:
If its not charging then there might be problem in your Charging Jack.
First press power Button ( Around 10 sec ) When Screen Off Immediately press Power and Volume less Button.
Bootloader Mode opens .
Connect Your Charger and Check whether Charger Connected or Not ??
Now
I
Came To Your Question * q in the last command is to restart it hung up and did not care anymore. ??
When You Command " fastboot reboot " it hang up to " Bootloader unlock Screen" Its Because might be While Flashing TWRP You by mistakely Remove Your "Boot Image" and Thats Why your Mobile Hang Up.
You should Also Note That All Moto X Play dont have same Boot Image .
You First Need To Download Boot Image Flash It Then Your Problem will sohrtout For Sure.
Click to expand...
Click to collapse
Yes, he hung up and did not care anymore. when I command "Fastboot reboot" he simply hung up and now does not care and neither starts in fastboot and also does not charge. It kind "put out the fastboot mode system" and is being recognized the computer as "unknown device" and has no way gives the flash rom stock because does not start in fastboot mode. He got hardbrick.
more where I download the boot image of it? 're Almost impossible to find a solution to this problem.
* Very need your help, Thank you!:crying:
Rwaan said:
Yes, he hung up and did not care anymore. when I command "Fastboot reboot" he simply hung up and now does not care and neither starts in fastboot and also does not charge. It kind "put out the fastboot mode system" and is being recognized the computer as "unknown device" and has no way gives the flash rom stock because does not start in fastboot mode. He got hardbrick.
more where I download the boot image of it? 're Almost impossible to find a solution to this problem.
* Very need your help, Thank you!:crying:
Click to expand...
Click to collapse
Try Flashing Firmware through RSD Lite ( Note RSD Lite Cant support Window 10)
and Please Give me Some more information .
1. Do Bootloader Mode Open or Not.
2. What Command You Exactly use when your cell Bricked .
and please reply fast.
xpectedme094 said:
Try Flashing Firmware through RSD Lite ( Note RSD Lite Cant support Window 10)
and Please Give me Some more information .
1. Do Bootloader Mode Open or Not.
2. What Command You Exactly use when your cell Bricked .
and please reply fast.
Click to expand...
Click to collapse
1. He does not enter the bootloader mode. You can not use RSD Lite to be able to give him the flash, the RSD does not recognize him because he does not enter the fastboot mode, moto x play he does nothing're completely off. when I connect the computer it is always recognized as "unknown device" so I can not give it flash or the cmd and not by RSD Lite.
2.I used all of the commands but did not pay attention had given error in any command more in the last it is simply reset the device he hung up and did not care anymore. Ai can not do anything it just know that he ta working as it appears on the computer when I connect it, the following NOTIFICATION ...
"USB Device Not Recognized,
* installing drivers ... failure.
* Unknown device. "
Every time I connect it to the computer appears such reports and have all the drivers installed and already uninstalled and installed back more not decided.
someone there gives me the file "bootloader singleimage.bin" Moto X Play (XT1563) and drivers "Qualcomm HS-USB qdloader 9008 (com12)" for me to recover my device a Hard Brick. Thanks in advance.
I have the same problem
Rwaan said:
someone there gives me the file "bootloader singleimage.bin" Moto X Play (XT1563) and drivers "Qualcomm HS-USB qdloader 9008 (com12)" for me to recover my device a Hard Brick. Thanks in advance.
Click to expand...
Click to collapse
I have the same problem, Can you send me the files? please. do you advance with the thing? (sorry for my poor english)
laloraptor said:
I have the same problem, Can you send me the files? please. do you advance with the thing? (sorry for my poor english)
Click to expand...
Click to collapse
I have the files that can fix my machine, since'm two months without any solution. I need the files to resurrect my Moto X Play With HardBrick.
Who has the files please makes a uploud and I send. My Gmail is [email protected].
thank you!
I have same problem, my moto x play is hard bricked and gets only detected as qdloader Q9008. I am looking for the blank flash files, something like prog_emmc_firehose_8939.mbn
i also have hard bricked ( Qloader 9008 )
Did someone find a solution? Mine is also hard bricked the exact same way.
hi there I am in the same situation! any solution? any ideas?
gilbertoperezx1 said:
hi there I am in the same situation! any solution? any ideas?
Click to expand...
Click to collapse
It can be revived either by Blank flash files or by easy jtag emmc flash.. Unfortunately no one is having blank flash files.. Hopefully someone will come up with a blank flash file.. If you want to fix it quicky, then only way is flashing emmc by easy jtag box.. Like the video below..
https://www.youtube.com/watch?v=t7ZzeRGOoEw&feature=youtu.be
Moto x play hard brick
Moto x play turned off after an update and did not turn on nor does it give a precise signal of the files BlankFlash for XT1563
alexmota00 said:
Moto x play turned off after an update and did not turn on nor does it give a precise signal of the files BlankFlash for XT1563
Click to expand...
Click to collapse
Its hard bricked and no blank files aren't working as of now.. We have started a telegram group of those who got their MXp's hard bricked.. You can join too if like.. Here is the link : https://t.me/Unbrick_MXP
i have the same problem hardbrick please send me file. my mail [email protected]
david livingstone said:
i have the same problem hardbrick please send me file. my mail [email protected]
Click to expand...
Click to collapse
There is no working files available as of now..
share to me please have the same problem
Have the same problems please share to me this files
[email protected]
[Help] fastboot error "Loading keystore failed status 5 [600] USB init ept @0x8f2270"
ok so i have a device, LG spirit H440n.
and i cant get it work.
if im trying to get into download mode, make a factory reset through the stock "recovery" mode or to boot normally i get this:
boot certification verify
Secure bootung Error!
Cause: boot certification verify.
i just cant do anything.
but i can enter fastboot mode. but when i enter i get the following:
fastboot_init()
Loading keystore failed status 5 [600] USB init ept @0x8f2270
udc_start()
-- reset --
-- portchange --
fastboot: processing commands
from there i cannot apply fastboot comands. if ill send "fastboot devices" i can see the device attached.
if i send "fastboot reboot" i dont get any error but device doesnt reboot, i just see in the device screen a new line "fastboot: reboot".
and if im trying to flash somthing i get an error "failed remote unknown command".
any solution?
Shlomi93 said:
ok so i have a device, LG spirit H440n.
and i cant get it work.
if im trying to get into download mode, make a factory reset through the stock "recovery" mode or to boot normally i get this:
boot certification verify
Secure bootung Error!
Cause: boot certification verify.
i just cant do anything.
but i can enter fastboot mode. but when i enter i get the following:
fastboot_init()
Loading keystore failed status 5 [600] USB init ept @0x8f2270
udc_start()
-- reset --
-- portchange --
fastboot: processing commands
from there i cannot apply fastboot comands. if ill send "fastboot devices" i can see the device attached.
if i send "fastboot reboot" i dont get any error but device doesnt reboot, i just see in the device screen a new line "fastboot: reboot".
and if im trying to flash somthing i get an error "failed remote unknown command".
any solution?
Click to expand...
Click to collapse
Fastboot commands are disabled on lk user builds (LittleKernel (Bootloader most of qcom devices use)) That means while you can see device in fastboot mode you cant interact with it since it has no commands implemented there is no way around it but why dont you just use lg flash tool? from my experience you should still have access to it also more info about lk here check out page 14 for info about fastboot and how it is disabled, No this doesnt mean we can recompile lk before someone asks since we dont have sign keys
Ivan_Meler said:
Fastboot commands are disabled on lk user builds (LittleKernel (Bootloader most of qcom devices use)) That means while you can see device in fastboot mode you cant interact with it since it has no commands implemented there is no way around it but why dont you just use lg flash tool? from my experience you should still have access to it also more info about lk here check out page 14 for info about fastboot and how it is disabled, No this doesnt mean we can recompile lk before someone asks since we dont have sign keys
Click to expand...
Click to collapse
can i use LG flash tool when device is in fastboot mode?
how?
and i will take a look on what you send me. thanks!
Shlomi93 said:
can i use LG flash tool when device is in fastboot mode?
how?
and i will take a look on what you send me. thanks!
Click to expand...
Click to collapse
No not really but you should be able to put it in lg's download mode, That file just documents lk quite interesting stuff but cant help in unlocking bootloader in anything before somebody asks
Ivan_Meler said:
No not really but you should be able to put it in lg's download mode, That file just documents lk quite interesting stuff but cant help in unlocking bootloader in anything before somebody asks
Click to expand...
Click to collapse
no matter what i send i get the same error. and according the guild that you gave me these commands should work..
i just cant get rid off this error.
any idea??
examples:
C:\Users\Shlomi>fastboot reboot-bootloader
rebooting into bootloader...
FAILED (remote: unknown command)
finished. total time: 0.010s
C:\Users\Shlomi>fastboot continue
resuming boot...
FAILED (remote: unknown command)
finished. total time: 0.008s
C:\Users\Shlomi>fastboot oem device-info
...
FAILED (remote: unknown command)
finished. total time: 0.006s
Shlomi93 said:
no matter what i send i get the same error. and according the guild that you gave me these commands should work..
i just cant get rid off this error.
any idea??
examples:
C:\Users\Shlomi>fastboot reboot-bootloader
rebooting into bootloader...
FAILED (remote: unknown command)
finished. total time: 0.010s
C:\Users\Shlomi>fastboot continue
resuming boot...
FAILED (remote: unknown command)
finished. total time: 0.008s
C:\Users\Shlomi>fastboot oem device-info
...
FAILED (remote: unknown command)
finished. total time: 0.006s
Click to expand...
Click to collapse
According to what i sent you nothing will work in fastboot actually it just explains every single command is disabled just wanted to clearify fastboot commands are completely disabled
Ivan_Meler said:
According to what i sent you nothing will work in fastboot actually it just explains every single command is disabled just wanted to clearify fastboot commands are completely disabled
Click to expand...
Click to collapse
goddammit
so im basically fu*ked?
Shlomi93 said:
goddammit
so im basically fu*ked?
Click to expand...
Click to collapse
Power Off your device
Now press the Volume Up button and hold it
Plug in your device into your computer using a microUSB cable
After a few seconds it should jump into download mode
try to reproduce those steps you should see lg's download mode apear on the screen
Ivan_Meler said:
Power Off your device
Now press the Volume Up button and hold it
Plug in your device into your computer using a microUSB cable
After a few seconds it should jump into download mode
try to reproduce those steps you should see lg's download mode apear on the screen
Click to expand...
Click to collapse
when im trying to get into download mode i get this again:
boot certification verify
Secure bootung Error!
Cause: boot certification verify.
UP
I have the same issue with lg spirit 4g (h440n) on hutchison three uk. boot certification verify in download mode, and then off in 3-4 seconds. fastboot mode stays on without going off, with the same error as the original poster. But no fastboot commands do anything. Annoying because nothing dodgy has been done with this phone, and it is always treated with the utmost care. Need to fix because settings produces "unfortunately settings has stopped", after a factory reset, even in safe mode.
Shlomi93 said:
[NORMAL][Ayuda] error de arranque rápido "Error en el estado de carga del almacén de claves 5 [600] USB init ept @ 0x8f2270"[/NORMAL]
ok, entonces tengo un dispositivo, LG espíritu H440n.
y no puedo hacer que funcione.
Si estoy tratando de ingresar al modo de descarga, realice un restablecimiento de fábrica a través del modo de "recuperación" de stock o para iniciar normalmente obtengo esto:
verificación de certificación de arranque
¡Error de arranque seguro!
Causa: verificación de certificación de arranque.
simplemente no puedo hacer nada
pero puedo entrar en modo fastboot. pero cuando entro me sale lo siguiente:
fastboot_init()
Estado de error al cargar el almacén de claves 5 [600] USB init ept [MENCIÓN = 1163592] 0x8 [/ MENCIÓN] f2270
udc_start()
-- Reiniciar --
-- cambio de puerto --
fastboot: procesamiento de comandos
desde allí no puedo aplicar comandos fastboot. Si envío "dispositivos de arranque rápido", puedo ver el dispositivo adjunto.
si envío "reinicio de arranque rápido" no obtengo ningún error pero el dispositivo no se reinicia, solo veo en la pantalla del dispositivo una nueva línea "arranque rápido: reinicio".
y si estoy tratando de flashear algo, aparece el error "comando remoto desconocido fallido".
¿alguna solución?
Click to expand...
Click to collapse
Please, please, someone solve it? I have the same problem after trying to install twrp on my lg leon lte h340ar and I can only access fastboot mode and factory data reset, which only allows me to restore it but the "secure booting error" message reappears
Can't relock bootloader with
Code:
fastboot oem lock
fastboot says boot.img is not signed
I tried the boot img from PPO29.0114-16-5, PPO29.0114-16, and PPO29.80-61. All it says are unsigned.
Now system update says this (screenshot attached):
Head on over to https://support.lenovo.com/us/en/downloads/ds101291 and download the tool, after installed put your phone in bootloader/fastboot mode and go through the rescue steps up until the firmware is downloaded, do not click rescue after the firmware is fully downloaded just head on over to C:\ProgramData\LMSA\Download\RomFiles and open the downloaded firmware and take the boot image from there and copy it to your fastboot tools folder and flash that boot.img check that the firmware matches the version installed on your phone before flashing the boot.img.
sd86 said:
Head on over to https://support.lenovo.com/us/en/downloads/ds101291 and download the tool, after installed put your phone in bootloader/fastboot mode and go through the rescue steps up until the firmware is downloaded, do not click rescue after the firmware is fully downloaded just head on over to C:\ProgramData\LMSA\Download\RomFiles and open the downloaded firmware and take the boot image from there and copy it to your fastboot tools folder and flash that boot.img check that the firmware matches the version installed on your phone before flashing the boot.img.
Click to expand...
Click to collapse
I'll try that out.
ptn107 said:
I'll try that out.
Click to expand...
Click to collapse
It worked?
Marcondes BR said:
It worked?
Click to expand...
Click to collapse
Yes.
I tried this and when I flashed boot.img from LMSA I got `(bootloader) Image signed with key bad key`
And then on the last fastboot oem lock command I get `(bootloader) Still require signed boot.img`
ptn107 said:
Can't relock bootloader with
Code:
fastboot oem lock
fastboot says boot.img is not signed
I tried the boot img from PPO29.0114-16-5, PPO29.0114-16, and PPO29.80-61. All it says are unsigned.
Now system update says this (screenshot attached):
Click to expand...
Click to collapse
https://forum.xda-developers.com/moto-g7/development/moto-g7-river-xt1962-1-firmware-29-114-t3913673/page2
posts 12 & 13
It worked!
The trick is to run `fastboot oem lock` 3x (not 2x) before flashing boot.img, and then run `fastboot oem lock` one last time after this is done.
Who would have thought?
MOTO G7 POWER ocean retbr ROM: PPO29.80-54
Marcondes BR said:
It worked?
Click to expand...
Click to collapse
This procedure will return my original bootloader locked? en
Este procedimento retornará meu bootloader original bloqueado? ptbr?
I unlocked but I regretted that I could not install neither twrp nor magisk en
desbloquiei mas me arrependi pois não consegui instalar nem twrp nem o magisk ptbr
I want back as it was before, will it be possible? en
quero volta como era antes, será possivel? ptbr
Ajuda eu marcondes
marcelo3m said:
This procedure will return my original bootloader locked? en
Este procedimento retornará meu bootloader original bloqueado? ptbr?
I unlocked but I regretted that I could not install neither twrp nor magisk en
desbloquiei mas me arrependi pois não consegui instalar nem twrp nem o magisk ptbr
I want back as it was before, will it be possible? en
quero volta como era antes, será possivel? ptbr
Ajuda eu marcondes
Click to expand...
Click to collapse
I will let you know Im in the same situation as you. I unlocked the bootloader to root my device. But after trying what was available couldn't root my device. Not even patching the boot.img with magisk as the tutorial says. It didn't worked for me and it soft bricked my device so I decided to go back and locked the bootloader but this is the first time that I have an issue locking back a Motorola bootloader I don't know what moto did this time but things don't work as before. Im downloading the firmware through this tools and see if its any different to the firmware available at lolinet repository. If it work with the boot.img from this zip its downloading then it meas that the latest firmware available at lolinet is not the final or not signed or anything. lets see I let you know.
Omar04 said:
I will let you know Im in the same situation as you. I unlocked the bootloader to root my device. But after trying what was available couldn't root my device. Not even patching the boot.img with magisk as the tutorial says. It didn't worked for me and it soft bricked my device so I decided to go back and locked the bootloader but this is the first time that I have an issue locking back a Motorola bootloader I don't know what moto did this time but things don't work as before. Im downloading the firmware through this tools and see if its any different to the firmware available at lolinet repository. If it work with the boot.img from this zip its downloading then it meas that the latest firmware available at lolinet is not the final or not signed or anything. lets see I let you know.
Click to expand...
Click to collapse
So what are you doing and what actually happens when you attempt to re-lock? Keep in mind that you need to run the fastboot oem lock command multiple times.
sd86 said:
Head on over to ...... and download the tool, after installed put your phone in bootloader/fastboot mode and go through the rescue steps up until the firmware is downloaded, do not click rescue after the firmware is fully downloaded just head on over to C:\ProgramData\LMSA\Download\RomFiles and open the downloaded firmware and take the boot image from there and copy it to your fastboot tools folder and flash that boot.img check that the firmware matches the version installed on your phone before flashing the boot.img.
Click to expand...
Click to collapse
Out of curiosity, since I am not familiar with the Lenovo/MOTO software tool, why can't you just hit recover? If the goal is to go back to full factory, from the box condition? Does it do something bad if you have an unlocked bootloader?
moto almost bricked
Hi guys i have a g7 (river) i tried to unlock the bootloader and root the devices to install android 10 launcher with animations.
and i was able root it with magisk and also installed twrp now my problem is my device is stuck and all i can access is "android recovery mode" i tried flashing official rom latest version
using this tutorial ON GETDRIOD TIPS but on adb after running the command "adb devices" i get this:: "adb server version (32) doesn't match this client (41); killing..."" on cmd
if i try on windows powershell it says after running the install command "adb sideload moto.zip" it returns this " oading: 'moto.zip'
* cannot read 'moto.zip' * i dont know what to do am a newbie i just wanna get back to normal stock mode. PLEASE HELP
skuppej said:
It worked!
The trick is to run `fastboot oem lock` 3x (not 2x) before flashing boot.img, and then run `fastboot oem lock` one last time after this is done.
Who would have thought?
Click to expand...
Click to collapse
That little "trick" helped me a lot!
After the 3 commands, I did boot then the sparse chunks, then vendor.img and oem.img
finished with original command...
(bootloader) Lock complete! Flash signed images after reboot if needed
OKAY [ 0.099s]
finished. total time: 0.101s
PS C:\ProgramData\LMSA\Download\RomFiles\SURFNA_PPB29.73_59_cid50_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml>
*Different phone, E6. But your post here may help other models as it did for me. Thank you!*
Does anyone help how to lock the bootloader moto g7 play?
How can I lock the bootloader back, every time I try to code the '' fastboot oem lock '' several times says that the error, someone can help me undo this:
Try...
I can try and help...
Are you running stock firmware?
You can get official firmware from Lenovo assistant.
Once it is installed, the only thing left is locking.
Do a factory reset after your phone is flashed and do your dev options stuff.
What is your region... What state is your phone in?
Give as much info and steps as possible.
mindlery said:
I can try and help...
Are you running stock firmware?
You can get official firmware from Lenovo assistant.
Once it is installed, the only thing left is locking.
Do a factory reset after your phone is flashed and do your dev options stuff.
What is your region... What state is your phone in?
Give as much info and steps as possible.
Click to expand...
Click to collapse
yes, I installed the firmware from lenovo's program, turned off the phone, plugged in the pc and opened adb, typed '' fastboot oem lock '' 3x and nothing happened, says I need a similar developer permission;(
Ok. You still need to turn on developer options and usb debugging. After going back to stock, do the dev options stuff and then plug into your computer and make sure to get the screen where you can always trust the pc... Then adb reboot bootloader from there.
Give that a go!
mindlery said:
Ok. You still need to turn on developer options and usb debugging. After going back to stock, do the dev options stuff and then plug into your computer and make sure to get the screen where you can always trust the pc... Then adb reboot bootloader from there.
Give that a go!
Click to expand...
Click to collapse
does this work on model g7 play xt1952-2? because I tried everything and was not even installed with lenovo the firmware anyway the error in adb!
these are my commands
fastboot oem lock
fastboot oem lock
fastboot oem lock
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash system_b system_b.img_sparsechunk.2
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot oem lock
but i still get this at the end
(bootloader) Check 'Allow OEM Unlock' in Android Settings > Developer
(bootloader) Options
OKAY [ 0.011s]
and bad key when i boot up
finished. total time: 0.013s