can't relock bootloader g7 - Moto G7 Questions & Answers

can't relock bootloader g7 - Moto G7 Questions & Answers

Can't relock bootloader with
Code:
fastboot oem lock
fastboot says boot.img is not signed
I tried the boot img from PPO29.0114-16-5, PPO29.0114-16, and PPO29.80-61. All it says are unsigned.
Now system update says this (screenshot attached):

Head on over to https://support.lenovo.com/us/en/downloads/ds101291 and download the tool, after installed put your phone in bootloader/fastboot mode and go through the rescue steps up until the firmware is downloaded, do not click rescue after the firmware is fully downloaded just head on over to C:\ProgramData\LMSA\Download\RomFiles and open the downloaded firmware and take the boot image from there and copy it to your fastboot tools folder and flash that boot.img check that the firmware matches the version installed on your phone before flashing the boot.img.

sd86 said:
Head on over to https://support.lenovo.com/us/en/downloads/ds101291 and download the tool, after installed put your phone in bootloader/fastboot mode and go through the rescue steps up until the firmware is downloaded, do not click rescue after the firmware is fully downloaded just head on over to C:\ProgramData\LMSA\Download\RomFiles and open the downloaded firmware and take the boot image from there and copy it to your fastboot tools folder and flash that boot.img check that the firmware matches the version installed on your phone before flashing the boot.img.
Click to expand...
Click to collapse
I'll try that out.

ptn107 said:
I'll try that out.
Click to expand...
Click to collapse
It worked?

Marcondes BR said:
It worked?
Click to expand...
Click to collapse
Yes.

I tried this and when I flashed boot.img from LMSA I got `(bootloader) Image signed with key bad key`
And then on the last fastboot oem lock command I get `(bootloader) Still require signed boot.img`

ptn107 said:
Can't relock bootloader with
Code:
fastboot oem lock
fastboot says boot.img is not signed
I tried the boot img from PPO29.0114-16-5, PPO29.0114-16, and PPO29.80-61. All it says are unsigned.
Now system update says this (screenshot attached):
Click to expand...
Click to collapse
https://forum.xda-developers.com/moto-g7/development/moto-g7-river-xt1962-1-firmware-29-114-t3913673/page2
posts 12 & 13

It worked!
The trick is to run `fastboot oem lock` 3x (not 2x) before flashing boot.img, and then run `fastboot oem lock` one last time after this is done.
Who would have thought?

MOTO G7 POWER ocean retbr ROM: PPO29.80-54
Marcondes BR said:
It worked?
Click to expand...
Click to collapse
This procedure will return my original bootloader locked? en
Este procedimento retornará meu bootloader original bloqueado? ptbr?
I unlocked but I regretted that I could not install neither twrp nor magisk en
desbloquiei mas me arrependi pois não consegui instalar nem twrp nem o magisk ptbr
I want back as it was before, will it be possible? en
quero volta como era antes, será possivel? ptbr
Ajuda eu marcondes

marcelo3m said:
This procedure will return my original bootloader locked? en
Este procedimento retornará meu bootloader original bloqueado? ptbr?
I unlocked but I regretted that I could not install neither twrp nor magisk en
desbloquiei mas me arrependi pois não consegui instalar nem twrp nem o magisk ptbr
I want back as it was before, will it be possible? en
quero volta como era antes, será possivel? ptbr
Ajuda eu marcondes
Click to expand...
Click to collapse
I will let you know Im in the same situation as you. I unlocked the bootloader to root my device. But after trying what was available couldn't root my device. Not even patching the boot.img with magisk as the tutorial says. It didn't worked for me and it soft bricked my device so I decided to go back and locked the bootloader but this is the first time that I have an issue locking back a Motorola bootloader I don't know what moto did this time but things don't work as before. Im downloading the firmware through this tools and see if its any different to the firmware available at lolinet repository. If it work with the boot.img from this zip its downloading then it meas that the latest firmware available at lolinet is not the final or not signed or anything. lets see I let you know.

Omar04 said:
I will let you know Im in the same situation as you. I unlocked the bootloader to root my device. But after trying what was available couldn't root my device. Not even patching the boot.img with magisk as the tutorial says. It didn't worked for me and it soft bricked my device so I decided to go back and locked the bootloader but this is the first time that I have an issue locking back a Motorola bootloader I don't know what moto did this time but things don't work as before. Im downloading the firmware through this tools and see if its any different to the firmware available at lolinet repository. If it work with the boot.img from this zip its downloading then it meas that the latest firmware available at lolinet is not the final or not signed or anything. lets see I let you know.
Click to expand...
Click to collapse
So what are you doing and what actually happens when you attempt to re-lock? Keep in mind that you need to run the fastboot oem lock command multiple times.

sd86 said:
Head on over to ...... and download the tool, after installed put your phone in bootloader/fastboot mode and go through the rescue steps up until the firmware is downloaded, do not click rescue after the firmware is fully downloaded just head on over to C:\ProgramData\LMSA\Download\RomFiles and open the downloaded firmware and take the boot image from there and copy it to your fastboot tools folder and flash that boot.img check that the firmware matches the version installed on your phone before flashing the boot.img.
Click to expand...
Click to collapse
Out of curiosity, since I am not familiar with the Lenovo/MOTO software tool, why can't you just hit recover? If the goal is to go back to full factory, from the box condition? Does it do something bad if you have an unlocked bootloader?

moto almost bricked
Hi guys i have a g7 (river) i tried to unlock the bootloader and root the devices to install android 10 launcher with animations.
and i was able root it with magisk and also installed twrp now my problem is my device is stuck and all i can access is "android recovery mode" i tried flashing official rom latest version
using this tutorial ON GETDRIOD TIPS but on adb after running the command "adb devices" i get this:: "adb server version (32) doesn't match this client (41); killing..."" on cmd
if i try on windows powershell it says after running the install command "adb sideload moto.zip" it returns this " oading: 'moto.zip'
* cannot read 'moto.zip' * i dont know what to do am a newbie i just wanna get back to normal stock mode. PLEASE HELP

skuppej said:
It worked!
The trick is to run `fastboot oem lock` 3x (not 2x) before flashing boot.img, and then run `fastboot oem lock` one last time after this is done.
Who would have thought?
Click to expand...
Click to collapse
That little "trick" helped me a lot!
After the 3 commands, I did boot then the sparse chunks, then vendor.img and oem.img
finished with original command...
(bootloader) Lock complete! Flash signed images after reboot if needed
OKAY [ 0.099s]
finished. total time: 0.101s
PS C:\ProgramData\LMSA\Download\RomFiles\SURFNA_PPB29.73_59_cid50_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml>
*Different phone, E6. But your post here may help other models as it did for me. Thank you!*

Does anyone help how to lock the bootloader moto g7 play?
How can I lock the bootloader back, every time I try to code the '' fastboot oem lock '' several times says that the error, someone can help me undo this:

Try...
I can try and help...
Are you running stock firmware?
You can get official firmware from Lenovo assistant.
Once it is installed, the only thing left is locking.
Do a factory reset after your phone is flashed and do your dev options stuff.
What is your region... What state is your phone in?
Give as much info and steps as possible.

mindlery said:
I can try and help...
Are you running stock firmware?
You can get official firmware from Lenovo assistant.
Once it is installed, the only thing left is locking.
Do a factory reset after your phone is flashed and do your dev options stuff.
What is your region... What state is your phone in?
Give as much info and steps as possible.
Click to expand...
Click to collapse
yes, I installed the firmware from lenovo's program, turned off the phone, plugged in the pc and opened adb, typed '' fastboot oem lock '' 3x and nothing happened, says I need a similar developer permission;(

Ok. You still need to turn on developer options and usb debugging. After going back to stock, do the dev options stuff and then plug into your computer and make sure to get the screen where you can always trust the pc... Then adb reboot bootloader from there.
Give that a go!

mindlery said:
Ok. You still need to turn on developer options and usb debugging. After going back to stock, do the dev options stuff and then plug into your computer and make sure to get the screen where you can always trust the pc... Then adb reboot bootloader from there.
Give that a go!
Click to expand...
Click to collapse
does this work on model g7 play xt1952-2? because I tried everything and was not even installed with lenovo the firmware anyway the error in adb!

these are my commands
fastboot oem lock
fastboot oem lock
fastboot oem lock
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash system_b system_b.img_sparsechunk.2
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot oem lock
but i still get this at the end
(bootloader) Check 'Allow OEM Unlock' in Android Settings > Developer
(bootloader) Options
OKAY [ 0.011s]
and bad key when i boot up
finished. total time: 0.013s

Related

[GUIDE] Return to stock and "Official status" - Moto X 2014

Return to stock - Moto X 2014
What you need:
Minimal ADB and Fastboot
Stock ROM Alternative 1 (Faster option)
Stock ROM Alternative 2 (Downloads speed are super slow if you are not premium)
Moto fastboot (mfastboot.exe) (This one is only needed if the file system.img is too big to flash (More than 500MB))
Steps:
Connect your phone to your computer and make sure to have "USB Debugging" enabled (About phone > Tap several times "Build number" > Go back > Developer options > Enable USB debugging)
Make sure your phone is at least 50% charged
Open ADB cmd (MAF32.exe)
Run this command to make sure it recognizes your phone.
Code:
adb devices
After it recognizes it, run the command (It should reboot into bootloader)
Code:
adb reboot bootloader
Unzip the downloaded STOCK ROM into the same folder as where you installed minimal ADB (C:\Program Files (x86)\Minimal ADB and Fastboot)
Open the "flashfile.xml" file with any text editor
The file tells you how to flash the files into your phone
Mine said:
Code:
fastboot oem fb_mode_set oem
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
The sistem.img part was a big file divided into 9 files about 250MB each. If your system.img is bigger than 500MB you'll need to use mfastboot.
Do the commands one by one.
After you are done with everything, reboot and it should say in the Status: Official
EDIT 24/04/2016:
- Added faster alternative download to stock ROMS.

Tovagulet said:
Return to stock - Moto X 2014
What you need:
Minimal ADB and Fastboot
Stock ROM (That's the only download page with like all the stock ROMs, downloads speed are super slow if you are not premium)
Moto fastboot (mfastboot.exe) (This one is only needed if the file system.img is too big to flash (More than 500MB))
Steps:
Connect your phone to your computer and make sure to have "USB Debugging" enabled (About phone > Tap several times "Build number" > Go back > Developer options > Enable USB debugging)
Make sure your phone is at least 50% charged
Open ADB cmd (MAF32.exe)
Run this command to make sure it recognizes your phone.
Code:
adb devices
After it recognizes it, run the command (It should reboot into bootloader)
Code:
adb reboot bootloader
Unzip the downloaded STOCK ROM into the same folder as where you installed minimal ADB (C:\Program Files (x86)\Minimal ADB and Fastboot)
Open the "flashfile.xml" file with any text editor
The file tells you how to flash the files into your phone
Mine said:
Code:
fastboot oem fb_mode_set oem
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
The sistem.img part was a big file divided into 9 files about 250MB each. If your system.img is bigger than 500MB you'll need to use mfastboot.
Do the commands one by one.
After you are done with everything, reboot and it should say in the Status: Official
Click to expand...
Click to collapse
the easiest way is using RSDlite and chose flashfile.xml to flash. Done !

md07 said:
the easiest way is using RSDlite and chose flashfile.xml to flash. Done !
Click to expand...
Click to collapse
Not everybody uses windows. I am a linux user, so no RSDLite is available. Also not available for mac. This guide is great for people who can't use RSDLite or need to do specific steps only instead of blindly trusting RSDLite.
Sent from my XT1095 using Tapatalk

Thanks, I'm also not fond of flashing ROM images via program scripts, I prefer the old step by step method. :thumbup:

Any word on XT1095 or XT1097_retca-retca? How freaken hard is it to capture an OTA or factory image these days?

I still get "Software status: Modified"

md07 said:
the easiest way is using RSDlite and chose flashfile.xml to flash. Done !
Click to expand...
Click to collapse
AGISCI said:
Not everybody uses windows. I am a linux user, so no RSDLite is available. Also not available for mac. This guide is great for people who can't use RSDLite or need to do specific steps only instead of blindly trusting RSDLite.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Also, RSDLite does not work in Windows 10.
Thanks for tutorial.

Is this for Stock 6.0 Firmware : VICTARA_RETEU_XT1092_6.0_MPE24.49-18_cid7_CFC.xml.zip

thomstrack said:
Also, RSDLite does not work in Windows 10.
Click to expand...
Click to collapse
it works with Windows 10... try to upgrate RSD to the latest version

nikky2u20 said:
Is this for Stock 6.0 Firmware : VICTARA_RETEU_XT1092_6.0_MPE24.49-18_cid7_CFC.xml.zip
Click to expand...
Click to collapse
well, it's got all the right words and numbers (although the one I'm running from the TWRP method thread is MPE24.11-18, and this appears to be MPE24.49-18). I'm downloading it now - has anybody else tried it?

niciolaux said:
it works with Windows 10... try to upgrate RSD to the latest version
Click to expand...
Click to collapse
The latest version that I see is the 6.2.4, and does not work in Windows 10.
There is another version?

unfnknblvbl said:
I still get "Software status: Modified"
Click to expand...
Click to collapse
I think "Modified" means you unlocked the bootloader, right?
I used to successfully update my xt1095 to 5.1 by these steps:
unroot by using the uninstalling root function in the SEusers, and flash the stock recovery.img back.
download the OTA update, and let it flash my phone automatically.
got a stock 5.1. then you may do whatever you want.

unfnknblvbl said:
I still get "Software status: Modified"
Click to expand...
Click to collapse
+1
This method don't change to Status Official.
thomstrack said:
Also, RSDLite does not work in Windows 10.
Thanks for tutorial.
Click to expand...
Click to collapse
RSD Lite works perfectly in Windows 10.

I followed these steps, and reflashed to 5.1-21.3, then update to 21.6 (security patch).
Now I'm running 6.0! The OTA works!

We def need to get this stock image re-upped, because I could get gray hairs waiting for this to download... Anyone have any other links? Thanks

help!!! I downloaded the recovery image from the official motorola site, i have system image of 2 Gb and have no idea about how to flash the system image. I have a folder called windows(which was included in the recovery image zip that i downloaded) that folder contains a fastboot.exe file so is that the mfastoot file?If yes then how do i use it?
EDIT- Solved!

nikky2u20 said:
Is this for Stock 6.0 Firmware : VICTARA_RETEU_XT1092_6.0_MPE24.49-18_cid7_CFC.xml.zip
Click to expand...
Click to collapse
unfnknblvbl said:
well, it's got all the right words and numbers (although the one I'm running from the TWRP method thread is MPE24.11-18, and this appears to be MPE24.49-18). I'm downloading it now - has anybody else tried it?
Click to expand...
Click to collapse
Can confirm, this is the real deal. Works a treat, and none of those RPC errors that plagued me on the TWRP backup image.

I am on Brazilian frimware with 6.0 now on my device, but my actual model of the device is xt 1092 Indian version.
I want to go back to Indian frimware. Have anyone tried downgrading from 6.0 Brazilian frimware to 5.1 Indian frimware, is it possible? Is full image of 6.0 out for xt 1092, if so please share the link.
Sent from my XT1097 using Tapatalk

unfnknblvbl said:
Can confirm, this is the real deal. Works a treat, and none of those RPC errors that plagued me on the TWRP backup image.
Click to expand...
Click to collapse
Thnx for the info m8.
Could you upload it to something that is faster then filefactory perhaps? Cause this **** is SLOW
Thnx in advance
Cheers
Edit: it is also available here: https://mega.nz/#F!ow8igZRL!Z7vmN8GOpez2bVMYDvEKkg!IkEVHRxS
With thnx to @salaesp for finding the MU folder

Used this firmware on my MotoX
VICTARA_RETEU_XT1092_6.0_MPE24.49-18_cid7_CFC.xml.zip
And was able to get back to the stock state. The Bootloader is still unlocked but that I guess I can lock via OEM lock way?
Since this is the latest one couldn't verify if the OTA works or not.

[Guide]relock your bl

This guide will help you re lock the bootloader and fix the bootloader is damaged error download a stock rom for the cedric extract it into adb and fast boot . (Not into its own folder just all the files in adb ) link to stock roms :
Now copy these commands
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash boot boot.img
fastboot oem lock
If it worked there shouldn't be a bl warning and in fastboot it should say flashing-locked
Note any problems caused are not my fault I have tested on my device and on g5+ both are fine !

Thank you so much, my Bootloader is locked again.
̶C̶a̶n̶ ̶y̶o̶u̶ ̶p̶l̶e̶a̶s̶e̶ ̶g̶i̶v̶e̶ ̶u̶s̶ ̶f̶i̶r̶m̶w̶a̶r̶e̶ ̶f̶i̶l̶e̶ ̶t̶h̶a̶t̶ ̶y̶o̶u̶ ̶u̶s̶e̶d̶?̶

First its the command to relock de BL?
before the commands to flash system?

AlmapekeDj said:
First its the command to relock de BL?
before the commands to flash system?
Click to expand...
Click to collapse
You need to reflash system

With me didn't worked. It says "Not signed rom"

CypherPotato said:
With me didn't worked. It says "Not signed rom"
Click to expand...
Click to collapse
Redownload stock

CypherPotato said:
With me didn't worked. It says "Not signed rom"
Click to expand...
Click to collapse
Did you get it already? Still need it?
Anyway, if anyone else needs it https://forum.xda-developers.com/g5/development/official-stock-moto-g5-cedric-firmware-t3733897
This is the only one that worked signed for me, XT1672

my imei is 0 already tried everything but I did not have any results help me please it's an xt1672

jonathars said:
my imei is 0 already tried everything but I did not have any results help me please it's an xt1672
Click to expand...
Click to collapse
Reflash stock rom

CypherPotato said:
Reflash stock rom
Click to expand...
Click to collapse
I already did this and it did not work
---------- Post added at 02:36 AM ---------- Previous post was at 02:30 AM ----------
CypherPotato said:
Reflash stock rom
Click to expand...
Click to collapse
I already did this and it did not work

infixremix said:
This guide will help you re lock the bootloader and fix the bootloader is damaged error download a stock rom for the cedric extract it into adb and fast boot . (Not into its own folder just all the files in adb ) link to stock roms :
Now copy these commands
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash boot boot.img
fastboot oem lock
If it worked there shouldn't be a bl warning and in fastboot it should say flashing-locked
Note any problems caused are not my fault I have tested on my device and on g5+ both are fine !
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------------------------------------
You are amazing !!

Hi,
doesn't work for me. Tried from here:
https://forum.xda-developers.com/g5/development/official-stock-moto-g5-cedric-firmware-t3733897
Moto G5 - Jan 2017 firmware NPP25.137-15 and
Moto G5 - Nov 2017 firmware NPP25.137-93 (Moto G5 - Aug 2017 firmware NPP25.137-33/NPP25.137.33-10 not tested yet).
Error when flashing boot.img:
C:\g5\010117\platform-tools>fastboot flash boot boot.img
(bootloader) has-slot:boot: not found
Sending 'boot' (16384 KB) OKAY [ 0.583s]
Writing 'boot' (bootloader) Security version downgrade
(bootloader) Image boot failed validation
(bootloader) Preflash validation failed
FAILED (remote failure)
Finished. Total time: 1.035s
anyone an idea what's going wrong?
D.

CypherPotato said:
Reflash stock rom
Click to expand...
Click to collapse
can I reflash stock ROM with locked bootloader?
how can do that? using adb fastboot or RSD lite?
i just want to change my channel (today is retin, but i've got a stock ROM with retbr and want to use that)

carlapazin said:
can I reflash stock ROM with locked bootloader?
how can do that? using adb fastboot or RSD lite?
i just want to change my channel (today is retin, but i've got a stock ROM with retbr and want to use that)
Click to expand...
Click to collapse
Yes - via fastboot
I don't know why you would want to change though
You risk either not getting ota updates or potentially hard bricking your device if you flash a future ota update if you have flashed firmware that was not designed for your phones specific varient
Unless you have physically moved locations & the firmware you are using is not compatible with the countries mobile networks I see no benefits in changing firmware versions

TheFixItMan said:
Yes - via fastboot
I don't know why you would want to change though
You risk either not getting ota updates or potentially hard bricking your device if you flash a future ota update if you have flashed firmware that was not designed for your phones specific varient
Unless you have physically moved locations & the firmware you are using is not compatible with the countries mobile networks I see no benefits in changing firmware versions
Click to expand...
Click to collapse
thanx!!!

carlapazin said:
can I reflash stock ROM with locked bootloader?
how can do that? using adb fastboot or RSD lite?
i just want to change my channel (today is retin, but i've got a stock ROM with retbr and want to use that)
Click to expand...
Click to collapse
RSD Lite only emulates Fastboot inside the application.
Idk if you can flash the stock rom with an locked bootloader, if it is signed, you can, otherwise, no.

How to not loose your imei !

Are you on a 64bit rom ? If yes please read on!
Us developers have had reports of you guys loosing imei number. We can re gain your imei number however you will no longer have 4g.
HERES HOW TO FIX LOSS OF IEMI
Install 32 bit twrp
Go back to stock with fastboot method using full commands
Fastboot 32 bit twrp
Flash no verity zip
Reboot twrp
Wipe data
reboot recovery
Install 64 bit twrp
Reboot recovery
Install any 8.1 ROM
Reboot on first boot.
IF U DO NOT FLASH 32 BIT TWRP YOU WILL NOT GAIN IMEI NUMBER BACK
*THE CAUSE*
THE MAIN CAUSE OFF LOSSING IMEI IS FASTBOOTING STOCK WHILST HAVING 64BIT RECOVERY , ROM AND MODEM SO MOVE TO 32BIT BEFORE FLASHING STOCK . I REALLY DONT RECOMMEND YOU GO BACK TO STOCK UNLESS YOU KNOW WHAT YOU ARE DOING.STOCK FLASHIBLE WILL NOT LOOSE IMEI!

I'm just staying on a fully working 7.1.2 rom until an official oreo rom comes out, I'd say that's the wisest choice at this time.

Exanneon said:
I'm just staying on a fully working 7.1.2 rom until an official oreo rom comes out, I'd say that's the wisest choice at this time.
Click to expand...
Click to collapse
Very true!

infixremix said:
Are you on a 64bit rom ? If yes please read on!
Us developers have had reports of you guys loosing imei number. We can re gain your imei number however you will no longer have 4g.
HERES HOW TO FIX LOSS OF IEMI
Install 32 bit twrp
Go back to stock with fastboot method using full commands
Fastboot 32 bit twrp
Flash no verity zip
Reboot twrp
Wipe data
reboot recovery
Install 64 bit twrp
Reboot recovery
Install any 8.1 ROM
Reboot on first boot.
IF U DO NOT FLASH 32 BIT TWRP YOU WILL NOT GAIN IMEI NUMBER BACK
*THE CAUSE*
THE MAIN CAUSE OFF LOSSING IMEI IS FASTBOOTING STOCK WHILST HAVING 64BIT RECOVERY , ROM AND MODEM SO MOVE TO 32BIT BEFORE FLASHING STOCK . I REALLY DONT RECOMMEND YOU GO BACK TO STOCK UNLESS YOU KNOW WHAT YOU ARE DOING.STOCK FLASHIBLE WILL NOT LOOSE IMEI!
Click to expand...
Click to collapse
oh wow ...so there no way to get back 4g???

infixremix said:
We can re gain your imei number however you will no longer have 4g
Click to expand...
Click to collapse
So there's no way to get 4g working?

Can I get volte by doing this.? because I had lost volte,lte works fine.

infixremix said:
Are you on a 64bit rom ? If yes please read on!
Us developers have had reports of you guys loosing imei number. We can re gain your imei number however you will no longer have 4g.
HERES HOW TO FIX LOSS OF IEMI
Install 32 bit twrp
Go back to stock with fastboot method using full commands
Fastboot 32 bit twrp
Flash no verity zip
Reboot twrp
Wipe data
reboot recovery
Install 64 bit twrp
Reboot recovery
Install any 8.1 ROM
Reboot on first boot.
IF U DO NOT FLASH 32 BIT TWRP YOU WILL NOT GAIN IMEI NUMBER BACK
*THE CAUSE*
THE MAIN CAUSE OFF LOSSING IMEI IS FASTBOOTING STOCK WHILST HAVING 64BIT RECOVERY , ROM AND MODEM SO MOVE TO 32BIT BEFORE FLASHING STOCK . I REALLY DONT RECOMMEND YOU GO BACK TO STOCK UNLESS YOU KNOW WHAT YOU ARE DOING.STOCK FLASHIBLE WILL NOT LOOSE IMEI!
Click to expand...
Click to collapse
Hi,
My G5 is on Atomic 8.1 ROM. If i want to return to stock ROM and IF i apply your commands, i won't loose IMEI ?
Regards

006fazer said:
Hi,
My G5 is on Atomic 8.1 ROM. If i want to return to stock ROM and IF i apply your commands, i won't loose IMEI ?
Regards
Click to expand...
Click to collapse
No , u need to flash 32 bit recovery without stock then a 32 bit rom.

infixremix said:
No , u need to flash 32 bit recovery without stock then a 32 bit rom.
Click to expand...
Click to collapse
Ok and after a 32 bit rom I can flash the stock rom ?

An advice, please. Which is a fully working 7.1.2 custom rom?

salsaelpato said:
So there's no way to get 4g working?
Click to expand...
Click to collapse
This would be up to Lenovorola, whether or not they want to provide a fix for a flaw in their phones design
What interests me, is the varying degrees of severity. Some have no issues, some lost only VOLTE, some lose 4G/VOLTE altogether. It's well past time for an official statement from the developers of the phone. Maybe it's why an official Oreo update is taking so long and they are hiding behind the "your fault, you unlocked your phone" banner instead of acknowledging their ineptitude, whether purposefully or not, really messed up some of these devices.

Lol. A design flaw...... seriously? We are talking about custom roms NOT about an official software from Motorola! =))

Necesito ayuda quien me podrá a ayudar o explicar bien como puedo recuperar mi imei de mi moto g5 por favor
2211190794 manden whats si me podrán ayudar

Ema172161 said:
Necesito ayuda quien me podrá a ayudar o explicar bien como puedo recuperar mi imei de mi moto g5 por favor
2211190794 manden whats si me podrán ayudar
Click to expand...
Click to collapse
Please read the rules again - you have only just signed up!
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature).
Click to expand...
Click to collapse

I installed Lineage on my XT1672, but can not call anyone on Phone app, Google Camera does not work (if I update the app, I discovered that ...), Netflix is not compatible...
I installed stock ROM and bazinga... Without SIM signal... I am very sad...
I will stay in Lineage, because the things that not work are less important ... At least I have SIM signal...

Hi,
I restored with success the Lineageos 14.1 ROM from Atomics 8.1 Oreo ROM, no imei lost.
Should i can test a fastboot flash of the stock ROM Motorola ?
Regards

Hi,
i can confirm that we can return to stock !!! ;-D without loosing IMEI
- Reflash a 32bits TWRP recovery
- wype DATA
- reboot to bootloader
- use this command to flash stock ROM :
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Don't run those commands (IMEI = 0) :
fastboot erase modemst1
fastboot erase modemst2
After that you can boot the stock rom.
If you want to relock the boot loader, use this :
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash boot boot.img
fastboot oem lock
Reboot
After i immediatly receive notofication for OTA update, download in progress....
EDIT : I can confirme that OTA updates are fully working
EDIT : after the OTA of january security patch : IMEI = 0 i test with the OTA with march security patch....

006fazer said:
Hi,
i can confirm that we can return to stock !!! ;-D without loosing IMEI
- Reflash a 32bits TWRP recovery
- wype DATA
- reboot to bootloader
- use this command to flash stock ROM :
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Don't run those commands (IMEI = 0) :
fastboot erase modemst1
fastboot erase modemst2
After that you can boot the stock rom.
If you want to relock the boot loader, use this :
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash boot boot.img
fastboot oem lock
Reboot
After i immediatly receive notofication for OTA update, download in progress....
EDIT : I can confirme that OTA updates are fully working
EDIT : after the OTA of january security patch : IMEI = 0 i test with the OTA with march security patch....
Click to expand...
Click to collapse
Hello!
So I installed this update and lost IMEI.
Now I am trying flashing 32 bits twrp and stock rom and no success...
Can anybody help me please?
Thank you!

infixremix said:
Are you on a 64bit rom ? If yes please read on!
Us developers have had reports of you guys loosing imei number. We can re gain your imei number however you will no longer have 4g.
HERES HOW TO FIX LOSS OF IEMI
Install 32 bit twrp
Go back to stock with fastboot method using full commands
Fastboot 32 bit twrp
Flash no verity zip
Reboot twrp
Wipe data
reboot recovery
Install 64 bit twrp
Reboot recovery
Install any 8.1 ROM
Reboot on first boot.
IF U DO NOT FLASH 32 BIT TWRP YOU WILL NOT GAIN IMEI NUMBER BACK
*THE CAUSE*
THE MAIN CAUSE OFF LOSSING IMEI IS FASTBOOTING STOCK WHILST HAVING 64BIT RECOVERY , ROM AND MODEM SO MOVE TO 32BIT BEFORE FLASHING STOCK . I REALLY DONT RECOMMEND YOU GO BACK TO STOCK UNLESS YOU KNOW WHAT YOU ARE DOING.STOCK FLASHIBLE WILL NOT LOOSE IMEI!
Click to expand...
Click to collapse
OMG! Thnks!
I spend all day, testing a bunch of solutions and finally I have my phone back, thank you a lot, I can confirm that this works, tomorrow im gonna focus on get the 4G back, if something works, I let you guys know

https://forum.xda-developers.com/g5/how-to/how-to-recovery-4g-moto-g5-t3787208 this tutorial saved my 4G signal :good:
Just a little edit: for getting H+ signal in first step, I recommend installing PixelExperience ROM (based on Android 8.1.0) along with LATEST 64bit TWRP.
PixelExperience for G5: https://forum.xda-developers.com/g5/development/rom-pixelexperience-t3756673
TWRP x64 for G5: https://androidfilehost.com/?w=files&flid=236353
No verity opt (flashable TWRP zip, I recommend version 6.0, use in case if you are installing TWRP on stock ROM- without flashing this file on first run of TWRP, stock ROM won't boot): https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
EDIT2: It may take a little bit longer to establish network after boot with restored EFS (for me, it took almost 30 seconds). If phone logins into 3G network, just go to settings and make it search for all possible networks in range (there should be your 4G network also).
I AM NOT RESPONSIBLE FOR ANY DAMAGE, YOU ARE DOING THIS AT YOUR OWN RISK!

Stuck in Bootloop

I'm currently stuck in a bootloop with a rooted (Prime Exclusive) Moto G5 Plus. Every time I turn on the phone or restart the phone, I keep getting sent to TWRP Recovery, and can't boot into the system. What I want to do is just restore this phone to the stock firmware and factory reset my device. Please help me.

FamilyGuy0395 said:
I'm currently stuck in a bootloop with a rooted (Prime Exclusive) Moto G5 Plus. Every time I turn on the phone or restart the phone, I keep getting sent to TWRP Recovery, and can't boot into the system. What I want to do is just restore this phone to the stock firmware and factory reset my device. Please help me.
Click to expand...
Click to collapse
Download your actual firmware, unpack it into your fastboot folder (recommend: Minimal ADB & Fastboot), bring your device in fastboot mode and flash everything one after the other:
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
Sent from my Moto G5 Plus using XDA Labs

@Wolfcity Can you be more clear as to what you mean by my "actual firmware"? I'm not sure what firmware version my device is on, nor can I find any repository on the Internet to download said firmwares for the (Prime Exclusive) Moto G5 Plus.

FamilyGuy0395 said:
@Wolfcity Can you be more clear as to what you mean by my "actual firmware"? I'm not sure what firmware version my device is on, nor can I find any repository on the Internet to download said firmwares for the (Prime Exclusive) Moto G5 Plus.
Click to expand...
Click to collapse
As you have flashed a TWRP you must have your bootloader unlocked. You need the firmware that your device was on when you did that.
Downgrading i.e. flashing an older firmware can brick your device.
The newer firmwares for reteu/retus are ending on 93-x, like
POTTER_NPNS25.137-93-4 (january security patch)
POTTER_NPNS25.137-93-8 (march security patch)
POTTER_NPNS25.137-93-10 (april security patch)
Earlier ones had another number scheme.
Firmware for India, Brazil and Asia Pacific is ending on 92-x.
I don´t know the Prime exclusive edition but I don´t think that it uses another firmware. But I heard of a Amazon version with ads and an unlockable bootloader?
How did you unlock then? Or are there different versions?

@Wolfcity I really don't know how to respond, but I can't figure this out. I don't know what firmware version to install, I don't know where I can find the firmware version, and whenever I try to run a fastboot command through adb I get stuck on an infinite "waiting for device" message. Can you please help me with step-by-step instructions on how to fix this?

FamilyGuy0395 said:
@Wolfcity I really don't know how to respond, but I can't figure this out. I don't know what firmware version to install, I don't know where I can find the firmware version, and whenever I try to run a fastboot command through adb I get stuck on an infinite "waiting for device" message. Can you please help me with step-by-step instructions on how to fix this?
Click to expand...
Click to collapse
Here are some firmware sources:
https://androidfilehost.com/?a=show&w=files&flid=171014
https://mirrors.lolinet.com/firmware/moto/potter/official/RETAIL/
http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=25&page=1
I can´t tell you on which firmware you were when you unlocked your bootloader. And the next problem is that you can´t run any fastboot commands, you need fastboot to flash the stock firmware with the commands I posted above.
Have you the latest Motorola drivers and something like Minmal ADB & Fastboot installed?

1) from TWRP run "Bootloader reboot"
2) send the command "fastboot devices" receive the serial number of the phone. Once you have obtained the serial download "POTTER_NPNS25.137-93-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.info.txt" and execute the commands as suggested.

@Wolfcity, @antonio52 Thank you guys SO much! I finally got around to doing this, and my device is running perfectly well now! I couldn't have done it without you!

FamilyGuy0395 said:
@Wolfcity, @antonio52 Thank you guys SO much! I finally got around to doing this, and my device is running perfectly well now! I couldn't have done it without you!
Click to expand...
Click to collapse
You're welcome. Nice to hear you got it working again.
Sent from my Moto G5 Plus using XDA Labs

[ROM][STOCK][FASTBOOT][OP8] Stock Fastboot ROMs for OnePlus 8

Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus 8 in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus 8 to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
DOWNLOAD
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus 8
BRANDED PHONE
For now branded device are not supported
MANUAL FLASH: Windows - OSX - Linux
If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here
Is reccomended to format data or the rom cannot boot:
Code:
fastboot -w
Others Commands to flash a fastboot rom
Code:
fastboot flash aop aop.img
fastboot flash bluetooth bluetooth.img
fastboot flash boot boot.img
fastboot flash dsp dsp.img
fastboot flash dtbo dtbo.img
fastboot flash LOGO LOGO.img
fastboot flash modem modem.img
fastboot flash oem_stanvbk oem_stanvbk.img
fastboot flash qupfw qupfw.img
fastboot flash storsec storsec.img
fastboot flash multiimgoem multiimgoem.img
fastboot flash uefisecapp uefisecapp.img
fastboot flash recovery recovery.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
fastboot flash opproduct opproduct.img
fastboot reboot fastboot
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot reboot
REMEMBER
"Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
If the device automatically reboot in Stock Recovery mode don't reboot it and wait the flash end.
These ROMs can't be used to update or downgrade your phone but just to restore your phone.
If the rom seems doesn't start go in recovery stock and follow this guideline: English -> Wipe data and cache -> Erase everything.
If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide
If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/
If you got some problems like write error or no partition, check this: https://forum.xda-developers.com/showpost.php?p=76658555&postcount=34
DONATE LINK
If you want to support this and others my projects please consider making a donation, thanks.

Branded devices is for example a Chinese version with HydrogenOS to which OxigenOS has been installed? If so, how can a branded device be recovered?
Thanks

Hi guys, i'm here again to ask for your support, actually with android 10 Google introduced a lot of changing, from dynamic partitions to the new keymaster 4 encryption/decryption. Teamwin is working hard to update TWRP but they will still take some time. Currently some things already work but there are difficulties in bringing them to the OnePlus 8/8 Pro, for example decryption already works but creates some problems on the OnePlus devices. That's why I decided to create a Paypal moneybox to be able to bring you the latest updates in the shortest time possible. As I have previously done, I assure you of a support of at least 2 years (within the limits of my possibilities). In addition to the TWRP I will improve the fastboot roms and add OnePlus 8/8 Pro to my TOOL ALL IN ONE (and maybe I will also bring the RevengeOS). By getting hold of a OnePlus 8 or 8 Pro I will also be able to improve the TWRP for OnePlus 7T and 7T Pro.
OnePlus 8/8 Pro PayPal MoneyBox: https://www.paypal.com/pools/c/8pfrIOL3Qa
If you are unable to participate in the PayPal moneybox, you can make a normal donation (perhaps specifying that it is for the moneybox), however all private donations that I will receive for this or other projects will be included in the moneybox.
Private PayPal Donations: https://www.paypal.me/MauronofrioTool

Why after flash it, it boot up to Qualcomm crashdump mode and how to fix?

sakun-ice said:
Branded devices is for example a Chinese version with HydrogenOS to which OxigenOS has been installed? If so, how can a branded device be recovered?
Thanks
Click to expand...
Click to collapse
I think unbranded devices mean the device bought from T-Mobile or Verizon. Nothing to do with chinese versiion flash oxygenOS, if I'm not wrong.

Can't seem to get this to work. I'm trying to flash a stock rom for my OnePlus 8 after bricking it during a rooting process.
The device' bootloader is obviously unlocked and i can get the phone into Fastboot mode and connected to my PC.
The only issue is when i execute the flash-all.bat file, it can't seem to flash any of the files and gives an error consisting of the message "FAILED (remote: 'Flashing is not allowed for Critical Partitions').
What to do guys? Can anyone help me out.

Does anyone know where to find mobile oneplus 8 5g tmobile from mine is bricked I had same error as post above

KJStar said:
Can't seem to get this to work. I'm trying to flash a stock rom for my OnePlus 8 after bricking it during a rooting process.
The device' bootloader is obviously unlocked and i can get the phone into Fastboot mode and connected to my PC.
The only issue is when i execute the flash-all.bat file, it can't seem to flash any of the files and gives an error consisting of the message "FAILED (remote: 'Flashing is not allowed for Critical Partitions').
What to do guys? Can anyone help me out.
Click to expand...
Click to collapse
Try to flash fastboot rom with "tool all in one),It worked for me.

I needed modem I forgot to fastboot reboot fastboot guy in post 6 that's all you need to do is reboot fastboot then flash all I was looking for different file

Never mind I fixed it by downloading ota and going to system updates in settings because fastboot won't flash to modem right

I am having issues flashing. flashing not allowed on critical partition. please help I tried to use the large address aware program but nothing has changed.

bluemoel said:
I am having issues flashing. flashing not allowed on critical partition. please help I tried to use the large address aware program but nothing has changed.
Click to expand...
Click to collapse
Make sure your on the latest update: 10.5.8

mauronofrio said:
Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus 8 in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus 8 to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
DOWNLOAD
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus 8
BRANDED PHONE
For now branded device are not supported
MANUAL FLASH: Windows - OSX - Linux
If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here
Is reccomended to format data or the rom cannot boot:
Code:
fastboot -w
Others Commands to flash a fastboot rom
Code:
fastboot flash aop aop.img
fastboot flash bluetooth bluetooth.img
fastboot flash boot boot.img
fastboot flash dsp dsp.img
fastboot flash dtbo dtbo.img
fastboot flash LOGO LOGO.img
fastboot flash modem modem.img
fastboot flash oem_stanvbk oem_stanvbk.img
fastboot flash qupfw qupfw.img
fastboot flash storsec storsec.img
fastboot flash multiimgoem multiimgoem.img
fastboot flash uefisecapp uefisecapp.img
fastboot flash recovery recovery.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
fastboot flash opproduct opproduct.img
fastboot reboot fastboot
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot reboot
REMEMBER
"Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
If the device automatically reboot in Stock Recovery mode don't reboot it and wait the flash end.
These ROMs can't be used to update or downgrade your phone but just to restore your phone.
If the rom seems doesn't start go in recovery stock and follow this guideline: English -> Wipe data and cache -> Erase everything.
If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide
If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/
If you got some problems like write error or no partition, check this: https://forum.xda-developers.com/showpost.php?p=76658555&postcount=34
DONATE LINK
If you want to support this and others my projects please consider making a donation, thanks.

Click to expand...
Click to collapse
Hi, do you know if patching with local update a Oxygen OS Europe release from a Global release may cause problems to the fingerprint? I have a IN2010 with the Global OxygenOS but I would like to switch to the European versione becasue I live in Italy like you

Why not flash reserve.img?

nnyd said:
Why not flash reserve.img?
Click to expand...
Click to collapse
Because it is placed in userdata and not in a dedicated partition

I have an issue trying to flash on fastboot. It's says I can't flash on critical partitions. Yes I know alot of people are saying that but what I haven't seen is this:
This is my problem:
Fastboot get device-info
(Bootloader) device unlocked:true
(Bootloader) device critical unlock: false
(Bootloader) charger screen enabled: true
I have already tried "fastboot flashing unlock_critical"
It says bootloader already unlocked. I then re lock bootloader which I know is not a good idea( reflash stock with msm tool) and it lock then I try unlock critical command again and it still says device critical unlock: false

i need help please ..
i tried this method not the latest version i tried the 10.5.4 global
so it gave me all failed and error to foramt and others
then it restart my phone to show me crashdump
what should i do ?
should i use latest version ?
i hope you replay fast .. thank you

Alucardo1 said:
i tried this method not the latest version i tried the 10.5.4 global
so it gave me all failed and error to foramt and others
then it restart my phone to show me crashdump
what should i do ?
should i use latest version ?
i hope you replay fast .. thank you
Click to expand...
Click to collapse
Try again with 10.5.7. When it reboot to recovery, let it continue to run till it reboots on its own.

Unbrick from fastboot method
I hope I can help someone since I spent the whole night trying various methods to unbrick my Oneplus 8 and only this one worked for me JUST FOR INTERNATIONAL VERSION
You must have the drivers installed (Adb & Fastboot)
You must have your phone with the bootloader unlocked
1.- Download the file
2.-Unzip it
inside you will find Flash-all.bat
3.-Enter Fastboot mode
4.-Double click on the Flash-all.bat command
5.-It will direct you to the recovery, select the English language and restart in fastboot mode so that the process continues, wait for it to finish flashing everything and ready, the phone restarts on the latest version
https://mega.nz/folder/8tpUSSrR#7wH4NX_ccr2a6Ub8LXpsEA
Donate Link to support my work
https://paypal.me/pakomorales?locale.x=es_XC

cannot relock bootloader on oneplus 8
bro thanks for fastboot room for oneplus 8,i flash your fastboot room 10.5.9 everthing ok,but i relocked to boot loader it the phone be correpted. what should i do ,
please help me.

Database Users

welcome

can't relock bootloader g7 - Moto G7 Questions & Answers

Can't relock bootloader with Code: fastboot oem lock fastboot says boot.img is not signed I tried the boot img from PPO29.0114-16-5, PPO29.0114-16, and PPO29.80-61. All it says are unsigned. Now system update says this (screenshot attached):

ptn107 said: I'll try that out. Click to expand... Click to collapse It worked?

Marcondes BR said: It worked? Click to expand... Click to collapse Yes.

I tried this and when I flashed boot.img from LMSA I got `(bootloader) Image signed with key bad key` And then on the last fastboot oem lock command I get `(bootloader) Still require signed boot.img`

It worked! The trick is to run `fastboot oem lock` 3x (not 2x) before flashing boot.img, and then run `fastboot oem lock` one last time after this is done. Who would have thought?

Does anyone help how to lock the bootloader moto g7 play? How can I lock the bootloader back, every time I try to code the '' fastboot oem lock '' several times says that the error, someone can help me undo this:

Ok. You still need to turn on developer options and usb debugging. After going back to stock, do the dev options stuff and then plug into your computer and make sure to get the screen where you can always trust the pc... Then adb reboot bootloader from there. Give that a go!

Related

[GUIDE] Return to stock and "Official status" - Moto X 2014

[Guide]relock your bl

How to not loose your imei !

Stuck in Bootloop

[ROM][STOCK][FASTBOOT][OP8] Stock Fastboot ROMs for OnePlus 8

Categories

Resources