Hi Everybody and thanks in advance for your help.
I have a Samsung Galaxy A9 (SM-A920F) running on official Samsung firmware version A920FXXU2BSFB. The device has been factory reset and I need to get past the factory reset protection.
I have tried using multiple versions of Odin on different computers to flash the stock firmware on the device but this has been unsuccessful either getting stuck at SetupConnection stage or failing at the Complete(write) stage.
Any help would be appreciated.
Many Thanks.
that's a long journy to by pass the FRP. youll combination file and specific firmware flashing tool not just the odin one.
Regards
georgeliamcampbell said:
Hi Everybody and thanks in advance for your help.
I have a Samsung Galaxy A9 (SM-A920F) running on official Samsung firmware version A920FXXU2BSFB. The device has been factory reset and I need to get past the factory reset protection.
I have tried using multiple versions of Odin on different computers to flash the stock firmware on the device but this has been unsuccessful either getting stuck at SetupConnection stage or failing at the Complete(write) stage.
Any help would be appreciated.
Many Thanks.
Click to expand...
Click to collapse
Hi. I'm in the same situation as you .. have you solved it?
Related
Hey guys, so I have a note 3 n9005,which i had rooted previously. This morning, I tried to flash the new touchwiz kitkat firmware via Odin and failed. Now the phone wouldn't boot up, but I an able to make it into the download mode. I have tried flashing several firmwares but neither of them works, I also had cm11 installed, so odpnt know f the bootloader has been updated or not...
So of anybody could please help me with this, that would be greatly appreciated
i have excatly the same problem tried to update s9005 via odin hong kong version to german 4.4.2 and now wont boot, odin fails only 20 seconds in read so many threads would also like to see some solutions to op.
CaptaiinCaveman said:
Hey guys, so I have a note 3 n9005,which i had rooted previously. This morning, I tried to flash the new touchwiz kitkat firmware via Odin and failed. Now the phone wouldn't boot up, but I an able to make it into the download mode. I have tried flashing several firmwares but neither of them works, I also had cm11 installed, so odpnt know f the bootloader has been updated or not...
So of anybody could please help me with this, that would be greatly appreciated
Click to expand...
Click to collapse
You also need to add some of the stuff it is written in download mode and the log in Odin when in fails. If you went to 4.4.2 on N9005 you can not return to 4.3 (which you should have read by now, there are only 200 posts in 50 threads about it). What kind of N9005 was yours (16/32/64GB), what region/CSC?
xclub_101 said:
You also need to add some of the stuff it is written in download mode and the log in Odin when in fails. If you went to 4.4.2 on N9005 you can not return to 4.3 (which you should have read by now, there are only 200 posts in 50 threads about it). What kind of N9005 was yours (16/32/64GB), what region/CSC?
Click to expand...
Click to collapse
I flashed the DBT FW again with this pit file created by HSDPilot http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77.
It worked and lash was complete now however i am stuck in SAMSUNG logo after restart.
ANy help?
solution
newapostlenew said:
I flashed the DBT FW again with this pit file created by HSDPilot http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77.
It worked and lash was complete now however i am stuck in SAMSUNG logo after restart.
ANy help?
Click to expand...
Click to collapse
hi i followed your instructions afte having the same problem.
once it was flashed and at the samsung logo
i took battery out, replaced it and started phone in recovery mode. go to wipe factory reset
then reboot
mine worked and is ok .
CaptaiinCaveman said:
Hey guys, so I have a note 3 n9005,which i had rooted previously. This morning, I tried to flash the new touchwiz kitkat firmware via Odin and failed. Now the phone wouldn't boot up, but I an able to make it into the download mode. I have tried flashing several firmwares but neither of them works, I also had cm11 installed, so odpnt know f the bootloader has been updated or not...
So of anybody could please help me with this, that would be greatly appreciated
Click to expand...
Click to collapse
darkman13 said:
i have excatly the same problem tried to update s9005 via odin hong kong version to german 4.4.2 and now wont boot, odin fails only 20 seconds in read so many threads would also like to see some solutions to op.
Click to expand...
Click to collapse
Do either of you have a 16 GB version?
Hi All,
My problem :
I wanted to install the official kitkat rom but I made a big mystake : I took N900 files instead of N9005...
After that I successfully installed the right bootloader and CWM.
I installed some cuustom roms but the setupwizard crash at the last step
I tried to flash the complete official 4.4.2 rom but odin failed with message on the phone : "ODIN : invalid ext4 image"
Anybody has any idea to help me ?
hi guys i manage to fix it, well mine anyway worked by flashing the pit i found on xda and selecting repartion on odin 3.7 along with german 4.4.2 to my n9005 from Hong Kong, re booted and done a factory reset via volume button also wiped cache and re started and it came back alive on the selected german rom 4.4.2. hope it hels others. ps my note 3 was from hong kong n9005 32gb
xclub_101 said:
You also need to add some of the stuff it is written in download mode and the log in Odin when in fails. If you went to 4.4.2 on N9005 you can not return to 4.3 (which you should have read by now, there are only 200 posts in 50 threads about it). What kind of N9005 was yours (16/32/64GB), what region/CSC?
Click to expand...
Click to collapse
hey, i wasnt trying to downgrade, i was going from cm11 to official 4.4.2. i've got a 32gb model from france i believe (the box has french written all over it so do the manuals)
newapostlenew said:
I flashed the DBT FW again with this pit file created by HSDPilot http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77.
It worked and lash was complete now however i am stuck in SAMSUNG logo after restart.
ANy help?
Click to expand...
Click to collapse
dude, you are god thank you so much for that, working perfect now
xclub_101 said:
You also need to add some of the stuff it is written in download mode and the log in Odin when in fails. If you went to 4.4.2 on N9005 you can not return to 4.3 (which you should have read by now, there are only 200 posts in 50 threads about it). What kind of N9005 was yours (16/32/64GB), what region/CSC?
Click to expand...
Click to collapse
After installing DBT NB4 FW ( or with Polish NB3 FW) my LTE speeds become almost 0.
I tried multiple installs.
Any guidance?
Quick tip: Uninstall KIES.
Kies is like a big brother.
Use ODIN 1.85 and tick update phone bootloader. That's how I fixed mine. The other versions of Odin wouldn't let me update bootloader.
Of course, before you do this Flash/wipe data in recovery mode.
But uninstalling KIES solved my issue.
Sent from my SM-N9005 using Tapatalk
Today I tried to flash the official firmware on my rooted GT-I9505, but it failed along the way and now I'm stuck with the "firmware upgrade encountered an issue" screen. Tried recovering it using Skies but it couldn't connect to my device. Tried flashing it again but it now fails when writing into the device. Then I found out that it's write protected which I believe is the reason why odin could no longer write into it.
Is there still a way to recover my GS4 given its condition? Any help would be greatly appreciated. Thanks!
Soft-bricked GS4 GT-I9505 LTE
kumagron said:
Today I tried to flash the official firmware on my rooted GT-I9505, but it failed along the way and now I'm stuck with the "firmware upgrade encountered an issue" screen. Tried recovering it using Skies but it couldn't connect to my device. Tried flashing it again but it now fails when writing into the device. Then I found out that it's write protected which I believe is the reason why odin could no longer write into it.
Is there still a way to recover my GS4 given its condition? Any help would be greatly appreciated. Thanks!
Click to expand...
Click to collapse
I have the same happen to me today, except mine is not rooted but I'm stuck on same screen and it won't start. Any solutions to this problem will be greatly appreciated.
Thanks!!!
Hi ,
I recently rooted my Samsung Note 4 (running Lolly Pop 5.1.1) and about 5 days later it started turning on and off by itself. I noticed it only started doing it when I went to update the apps. Often when it self restarts it will get into a stuck loop, where it gets to the load screen, freezes, and re-starts again. The only method to get it to work again is to leave it with the battery out for 30 + mins and it always seems to right itself - except.. I thought it would be a smart idea to do a factory reset. Now it keeps getting stuck in the loop on the load screen of optimizing apps, and since this is a bit a of a lengthy process, it always resets itself now.
What can I do? Any help from experienced individuals appreciated!
Really don't want to brick a 4 month old $899 phone.
Thanks in advance people
Make a clean rom installation; download the latest firmware for your variant, clean dalvick, cache, system, and data. Then, flash the firmware through ODIN. After that, root with a custom kernel. If you have an N910C I recommed you this kernel:
http://forum.xda-developers.com/showthread.php?t=3206548
Hi Bryan,
Samsung Kies will not let me do a latest firmware install, it just keeps popping up 'device not supported' when I try to do a software reinstall and upgrade via Kies on my laptop
Is there anyway to do this on the fly?
Thanks for your help
bryanstevecl said:
Make a clean rom installation; download the latest firmware for your variant, clean dalvick, cache, system, and data. Then, flash the firmware through ODIN. After that, root with a custom kernel. If you have an N910C I recommed you this kernel:
http://forum.xda-developers.com/showthread.php?t=3206548
Click to expand...
Click to collapse
Jason040 said:
Hi Bryan,
Samsung Kies will not let me do a latest firmware install, it just keeps popping up 'device not supported' when I try to do a software reinstall and upgrade via Kies on my laptop
Is there anyway to do this on the fly?
Thanks for your help
Click to expand...
Click to collapse
Visit SamMobile and register, then search the appropriate firmware for your phone variant.
Example: My phone is an Exynos-Note 4 (N910C) and my operator is Tigo Colombia which in SamMobile appears COL. You just have to register, search the firmware for your phone and flash it using ODIN 3.10. (ODIN is a program you use to install firmwares in Samsung phones) There are lots of tutorials for flashing, it is quite simple.
bryanstevecl said:
Visit SamMobile and register, then search the appropriate firmware for your phone variant.
Example: My phone is an Exynos-Note 4 (N910C) and my operator is Tigo Colombia which in SamMobile appears COL. You just have to register, search the firmware for your phone and flash it using ODIN 3.10. (ODIN is a program you use to install firmwares in Samsung phones) There are lots of tutorials for flashing, it is quite simple.
Click to expand...
Click to collapse
Okay, thanks for that Bryan. I understand now.
bryanstevecl said:
Visit SamMobile and register, then search the appropriate firmware for your phone variant.
Example: My phone is an Exynos-Note 4 (N910C) and my operator is Tigo Colombia which in SamMobile appears COL. You just have to register, search the firmware for your phone and flash it using ODIN 3.10. (ODIN is a program you use to install firmwares in Samsung phones) There are lots of tutorials for flashing, it is quite simple.
Click to expand...
Click to collapse
Won't let me do a flash Bryan, I get this error message
"ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)"
Any ideas? Thanks
bryanstevecl said:
Visit SamMobile and register, then search the appropriate firmware for your phone variant.
Example: My phone is an Exynos-Note 4 (N910C) and my operator is Tigo Colombia which in SamMobile appears COL. You just have to register, search the firmware for your phone and flash it using ODIN 3.10. (ODIN is a program you use to install firmwares in Samsung phones) There are lots of tutorials for flashing, it is quite simple.
Click to expand...
Click to collapse
Okay, all fixed now. Disregard last message. Thanks for your help mate, much appreciated!!!
Does anyone know why? I just bought a Samsung Galaxy A7, and I cannot get it to update. I get a "Registering device..." window, then a "Processing failed" error. What does this mean? Why I cannot update it through normal means? I tried with Odin too, and it just failed instantly after the cm.bin file.
Thanks!
Edit: also, I found this http://forum.xda-developers.com/samsung-a-series/development/advanced-seven-t3509237 How can I install it? I couldn't find any tutorials.
anyone?
flash the stock marshmallow rom with Odin... that's the only way I can upgrade
Sent from my SM-A710M using Tapatalk
psychedeliqueee said:
Does anyone know why? I just bought a Samsung Galaxy A7, and I cannot get it to update. I get a "Registering device..." window, then a "Processing failed" error. What does this mean? Why I cannot update it through normal means? I tried with Odin too, and it just failed instantly after the cm.bin file.
Thanks!
Edit: also, I found this http://forum.xda-developers.com/samsung-a-series/development/advanced-seven-t3509237 How can I install it? I couldn't find any tutorials.
Click to expand...
Click to collapse
Try to factory reset your phone and try to update again.
Odin is preferable for updating as it doesn't require your device to be connected to laptop for very long. (Just until the flashing is completed ).
The link that you posted, I am sure requires one to be on 6.0.1 base first & then can flash that ROM.
Try Smart Switch for PC from Samsung site...
You are better off sticking to 5.1.1, I have encountered several major issues after upgrading my A7 to Mashmallow!
Hello guys!
I want to install twrp on my Galaxy s4 advance (lollipop) and then LOS13, but Im getting the pit mapping error in odin. Can someone help me please? Will reflashing stock rom help?
Thanks in advance!
Okay, the issue was my data cable. I've read many posts about this, but I've tested 2 of my original Samsung data cables and none of them worked. At least, the 3rd cable worked. It was ECC1DU0BBK, probably from my old Galaxy S2.