Database Users

[SOLVED]I9505 Hard brick?

After some experimenting with the I9505G firmware I ended up flashing its bootloader and got stuck. I used a tool to resurrect the S4 but its a no go for me.
Im in download mode and I can flash stock firmware and pit but when it reboots it enter qhusb dload and I cant do anything.
Any ideas?
--------------------------------------------------------------------------------------------------------------------------------------------
SOLVED:
While the S4 is in QHUSB DLOAD mode(blackscreen) use this tool http://forum.legija.net/showthread.p...-via-USB-Cable
Then go into download mode and flash http://forum.legija.net/attachment.p...1&d=1370000853
Then at reboot hold power down + volume up and down down and you will be in a special recovery mode. wait 10seconds, then remove batttery and restart the phone normal

Hello again Aerys...I'm still following your hard work to port i9505G firmware to the standard i9505 so you are such a martyr for all us and you deserve all the help ! :highfive:
Well if download mode is still working, it means that the original bootloader was not flashed ? Did you try to flash just the original i9505 bootloader with Odin ?

Yes I did but no luck.

Aerys said:
Yes I did but no luck.
Click to expand...
Click to collapse
I know there is a feature so called "fastboot" on Nexus. Maybe something similar for the GS4 ?
I'm speaking about this : http://theunlockr.com/2012/09/21/how-to-hard-reset-a-bricked-nexus-7-with-your-pc/

kaalalto said:
I know there is a feature so called "fastboot" on Nexus. Maybe something similar for the GS4 ?
I'm speaking about this : http://theunlockr.com/2012/09/21/how-to-hard-reset-a-bricked-nexus-7-with-your-pc/
Click to expand...
Click to collapse
S4 doesnt have fastboot but uses Download mode to flash firmwares etc. but thanks. I guess ill have to wait for my JTAG to resurrect.

OMG i just unbricked my S4:laugh::laugh:
I hold power + volume up and down and it power reset and flash bootloader and it works now!!:laugh::laugh:

Aerys said:
OMG i just unbricked my S4:laugh::laugh:
I hold power + volume up and down and it power reset and flash bootloader and it works now!!:laugh::laugh:
Click to expand...
Click to collapse
yehey!!!!! congratulations!!!!! S4 is now born again!!!!!! LOLz

What kind of reset is that ?
Sent from my GT-I9500 using Tapatalk 2

Aerys said:
OMG i just unbricked my S4:laugh::laugh:
I hold power + volume up and down and it power reset and flash bootloader and it works now!!:laugh::laugh:
Click to expand...
Click to collapse
Very nice news! I'm happy for you!!
But, please explain better how you re survived it !

While the S4 is in QHUSB DLOAD mode(blackscreen) use this tool http://forum.legija.net/showthread....g-galaxy-S4-(i9505-and-similar)-via-USB-Cable
Then go into download mode and flash http://forum.legija.net/attachment.php?attachmentid=4151&d=1370000853
Then at reboot hold power down + volume up and down down and you will be in a special recovery mode. wait 10seconds, then remove batttery and restart the phone normal:good:

Aerys said:
While the S4 is in QHUSB DLOAD mode(blackscreen) use this tool http://forum.legija.net/showthread....g-galaxy-S4-(i9505-and-similar)-via-USB-Cable
Then go into download mode and flash http://forum.legija.net/attachment.php?attachmentid=4151&d=1370000853
Then at reboot hold power down + volume up and down down and you will be in a special recovery mode. wait 10seconds, then remove batttery and restart the phone normal:good:
Click to expand...
Click to collapse
better to add this topic to my favorites... hahaha

leeomendes said:
better to add this topic to my favorites... hahaha
Click to expand...
Click to collapse
Hi,
Does anyone knows how to install the QHUSB Qualcomm drivers? When I'm connecting the phone, I can see the QHSUSB-DLOAD in Device Manager but the recovery tool can't find my phone...
Any help is appreciated!!
Wouter

Swammie87 said:
Hi,
Does anyone knows how to install the QHUSB Qualcomm drivers? When I'm connecting the phone, I can see the QHSUSB-DLOAD in Device Manager but the recovery tool can't find my phone...
Any help is appreciated!!
Wouter
Click to expand...
Click to collapse
Install this driver, http://www.riffbox.org/downloads/RiffSetup.exe
This will install following files to Your computer:
JTAG Manager software v1.43
RIFF Box Firmware v1.32
RIFF Box control port driver
RIFF Box update port driver
RIFF DCC USBLoader driver
QUALCOMM QHUSB_DLOAD driver.

HI Aerys,
Thanks for the files but I managed to install the right drivers. I uninstalled the drivers from Windows and when reconnecting the phone to my pc, I installed the QHUSB drivers. I'm going to flash the original software now, fingers crossed
Thanks,
Wouter

Man, what you did ? step by step?
1- flash stock room odin + pit file?
2- legija tool?
...

Aerys said:
While the S4 is in QHUSB DLOAD mode(blackscreen) use this tool http://forum.legija.net/showthread.p...-via-USB-Cable
Then go into download mode and flash http://forum.legija.net/attachment.p...1&d=1370000853
Then at reboot hold power down + volume up and down down and you will be in a special recovery mode. wait 10seconds, then remove batttery and restart the phone normal
Click to expand...
Click to collapse
This is a really nice news because we are now more confident for making advanced changes...:angel:
Please could you make a step by step tutorial as asked before ? It could save a lot of bricked i9505 :laugh:

But we aren't able to flash this way the 9505G bootloader, right?
L

can i flash the original S4 firmware to a Docomo S4
leeomendes said:
better to add this topic to my favorites... hahaha
Click to expand...
Click to collapse
hey guys in the download mode can i flash the original samsung s4 fw instead of docomo sc04e s4 fw?

i337
leeomendes said:
better to add this topic to my favorites... hahaha
Click to expand...
Click to collapse
still, i only get black screen. cant get the download or recovery mode. please, helppppppppppp.
this is what i get after i run galaxy_S4_9505.exe tool.
Version 1.6
Finding all active COM ports...
COM44 found
Finding all disks on computer ...
0. \\.\PhysicalDrive0 Size: 953869MB, (1953525168 sectors), size: 512 Mount:C:, Name:[]
Status: 0 The operation completed successfully.

Sorry to bring back an old thread but i have just had the same problem with my S4,
it just restarted itself a couple times then crashed and now it wont turn on at all.
the links posted by OP have expired, would it be possible to post new links?
or just post a bit more info on what can be done to unbrick

Help with brick

Hello
I have F version, country Italy
I tried install a few roms but I always had freeze screen and reboots. So finally tried restore from Odin and I had brick. I used the last firmware from Odin and one from this forum of "Fast download" And this only shows the bootimage and reboot again of freeze
In download mode shows in System: "custom", Recovery: Samsung Oficial
I cant enter on recovery mode
Im not sure if Samsung I still give me "warranty"
Anybody can help me ?
PD: sorry4myenglish

best bet is to try and flash another ROM if you can get into download mode still (making sure that you flash a ROM for the right version of your phone).
Samsung probably wont honor warranty as you tripped KNOX when flashing in the first place (that voids your warranty and I belive download mode states this)
EDIT:
the right version for you is the first link on the thread: http://forum.xda-developers.com/s6-...icial-stock-roms-firmware-aoj5-g928f-t3231589
as long as you have the SMG928F version from Italy

Natherul said:
best bet is to try and flash another ROM if you can get into download mode still (making sure that you flash a ROM for the right version of your phone).
Samsung probably wont honor warranty as you tripped KNOX when flashing in the first place (that voids your warranty and I belive download mode states this)
EDIT:
the right version for you is the first link on the thread: http://forum.xda-developers.com/s6-...icial-stock-roms-firmware-aoj5-g928f-t3231589
as long as you have the SMG928F version from Italy
Click to expand...
Click to collapse
Exactly that firmware made the brick on my phone

Ronalrago said:
Exactly that firmware made the brick on my phone
Click to expand...
Click to collapse
well it might be a corrupt download, but theres no MD5 for the files form that thread to match.
Can you enter download mode? If so then I would probably flash a custom recovery and install custom ROM just to get the phone running again.

Natherul said:
well it might be a corrupt download, but theres no MD5 for the files form that thread to match.
Can you enter download mode? If so then I would probably flash a custom recovery and install custom ROM just to get the phone running again.
Click to expand...
Click to collapse
Yep i can and I tried that, but the phone doesnt enter to recovery mode :crying:
Only can enter to dowloand mode

Ronalrago said:
Yep i can and I tried that, but the phone doesnt enter to recovery mode only:crying:
Only can enter to dowloand mode
Click to expand...
Click to collapse
then flash a new recovery from download mode and ODIN.
one example of a recovery can be founds in the instructions of
http://forum.xda-developers.com/s6-edge-plus/development/rom-audax-plus-v1-0-t3219017
EDIT:
or check
http://forum.xda-developers.com/s6-...-to-rooting-flashing-custom-recovery-t3200324
for custom recovery

Natherul said:
then flash a new recovery from download mode and ODIN.
one example of a recovery can be founds in the instructions of
http://forum.xda-developers.com/s6-edge-plus/development/rom-audax-plus-v1-0-t3219017
EDIT:
or check
http://forum.xda-developers.com/s6-...-to-rooting-flashing-custom-recovery-t3200324
for custom recovery
Click to expand...
Click to collapse
I just tried enter but only shows the message "recovery mode is senandroid enforcing" then shows (after 1 min maybe) the screen like a tv without signal

Some days ago I had exactly the same problem as you. You need to download "Smart Switch" on PC (something like samsung kies) and then recovery your phone through it. This samsung app will download a new system and completly repair your phone, after that if you want to install audax rom or something else you MUST go to developer options and enable USB DEBUGGING and OEM UNLOCK or you will have the same problem after rebooting phone.
Hope it helps, I bricked my phone for 1 day and managed to repair it with it. ODIN and all other stuff didn't worked.

DavidB93 said:
Some days ago I had exactly the same problem as you. You need to download "Smart Switch" on PC (something like samsung kies) and then recovery your phone through it. This samsung app will download a new system and completly repair your phone, after that if you want to install audax rom or something else you MUST go to developer options and enable USB DEBUGGING and OEM UNLOCK or you will have the same problem after rebooting phone.
Hope it helps, I bricked my phone for 1 day and managed to repair it with it. ODIN and all other stuff didn't worked.
Click to expand...
Click to collapse
Nice, I did not know that SmartSwitch for PC had build in recovery tools, but that is good to know.
Ronalrago said:
I just tried enter but only shows the message "recovery mode is senandroid enforcing" then shows (after 1 min maybe) the screen like a tv without signal
Click to expand...
Click to collapse
That message means that SElinux is enforced and the way around that is a custom kernel as the stock on is forcing it always.

Natherul after I bricked my phone by installing audax and the unchecking in dev options "oem unlock" Smart Switch was the only one thing that actually unbricked my phone :good:

DavidB93 said:
Some days ago I had exactly the same problem as you. You need to download "Smart Switch" on PC (something like samsung kies) and then recovery your phone through it. This samsung app will download a new system and completly repair your phone, after that if you want to install audax rom or something else you MUST go to developer options and enable USB DEBUGGING and OEM UNLOCK or you will have the same problem after rebooting phone.
Hope it helps, I bricked my phone for 1 day and managed to repair it with it. ODIN and all other stuff didn't worked.
Click to expand...
Click to collapse
I tried with this too. But says that doesnt support this model... Do u put in dowloand mode ? or how?

Ronalrago said:
I tried with this too. But says that doesnt support this model... Do u put in dowloand mode ? or how?
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=y8AZyalTf5Y#t=109

DavidB93 said:
https://www.youtube.com/watch?v=y8AZyalTf5Y#t=109
Click to expand...
Click to collapse
ok thanks I used and works but still have reboots and doesnt recognize the touch :crying::crying:
The download mode now says System: Oficial

Maybe try once again ?

DavidB93 said:
Maybe try once again ?
Click to expand...
Click to collapse
I did again. Also tried with odin and nothing
:crying::crying:

Hard brick SM-N910F

Tried installing custom recovery didn't work out like I had hoped now im stuck with a phone that isn't detected by odin or kies but by MiFlash
Please tell me there is something I can do to fix it or get it to some sort of working order..? Is there a jtag tool or usb jig I can use?
Update - I found out the phone was still under warranty so I sent it away to be repaired. It was repaired and I now have a working phone !

ylmcc said:
Tried installing custom recovery didn't work out like I had hoped now im stuck with a phone that isn't detected by odin or kies but by MiFlash
Please tell me there is something I can do to fix it or get it to some sort of working order..? Is there a jtag tool or usb jig I can use?
Click to expand...
Click to collapse
What have you done to reach that state? I know that you're desperate but you must give some details if you want help.

It was given to me with 5.1.1 installed however it failed mid process and while on 5.1.1 it kept freezing and acting weird such as boot with weird errors and they only appeared after it was updated, I decided to root it with odin and it never fully rebooted after the was root applied. I finally got it to boot to stock and rooted and decided to install a custom recovery which was twrp while selecting the recovery it said if its a wrong location it will brick, with this in mind I checked the model with the one on their site and it seemed to make sense and applied it.
This caused the original problem which made it boot straight to download mode with it saying it could not normal boot. I then googled the problem and one said the pit was corrupted and downloaded the correct file. I then applied this through odin with stock firmware and it refuse to flash. At the time I was thinking a restart on the device would help, but it resulted in not booting at all and not being detected....
It does not light up or make a vibration when its connected or powered on if there is any solution it would be great...

Can anyone help or point in the right direction?

Hard brick SM-910F
Hello! If this is the good recovery for the N910F he would have from start.
Try to boot via the recovery flight up + home + power.
If you TWRP flash a custom in a first time rom

[email protected] said:
Hello! If this is the good recovery for the N910F he would have from start.
Try to boot via the recovery flight up + home + power.
If you TWRP flash a custom in a first time rom
Click to expand...
Click to collapse
Nothing however the pc did detect a new driver called qualcomm hs-usb qdloader 9008

ylmcc said:
Nothing however the pc did detect a new driver called qualcomm hs-usb qdloader 9008
Click to expand...
Click to collapse
qualcomm emergency download mode. is it called.

Tunestwo said:
qualcomm emergency download mode. is it called.
Click to expand...
Click to collapse
Anything I can do to get some sort of os on the phone now?

in this case via Odin tries to reinstall the tar of the official rom N910F .

ylmcc said:
Anything I can do to get some sort of os on the phone now?
Click to expand...
Click to collapse
Can you tell us if you can get on recovery screen, either TRWP or stock, or download mode.

You could try installing these drivers:
https://www.androidfilehost.com/?fid=24499762636000789
Reboot just in case and try to connect your device again.
(In download mode, with the key combination)

mangui said:
Can you tell us if you can get on recovery screen, either TRWP or stock, or download mode.
Click to expand...
Click to collapse
The phone does not display or respond when the keys are pressed, just a black screen..
Battlehero said:
You could try installing these drivers:
https://www.androidfilehost.com/?fid=24499762636000789
Reboot just in case and try to connect your device again.
(In download mode, with the key combination)
Click to expand...
Click to collapse
Chrome detected a virus in the rar

ylmcc said:
The phone does not display or respond when the keys are pressed, just a black screen..
Chrome detected a virus in the rar
Click to expand...
Click to collapse
Really? I just scanned it with VirusTotal and it is clean.
Virus Total Results
32Bit.exe scan results
64Bit.exe scan results

Battlehero said:
Really? I just scanned it with VirusTotal and it is clean.
Virus Total Results
32Bit.exe scan results
64Bit.exe scan results
Click to expand...
Click to collapse
I'll download it again but windows defender detected it too.
Edit - Yep did it again, here is a link to a photo of what I get but from virus total I don't get why its being flagged perhaps false positive ??

Update
Found a jtag service that is cheap will update once I get it back...

sm-n910f
I got a brick note 4 and i want to fix it
I search over the internet for this solution and found a method
Sd card repair boot but it did not work at all
I need help
thank you in advance

Gr3 2017 firmware bricked

Hi guys
Few days ago i unlocked the bootloader of my device then it made a factory reset and every thing gone , default theme deleted , the apps that come with the device also deleted , and the most annoying thing that locking screen widget gone to ?
I searched for a rom in the forum and found this
https://forum.xda-developers.com/trash/stock-rom-pra-la1c185b101-emui-5-0-t3746017
When i try to flash it using SD card and dload , nothing happen , just locks the bootloader and erases every thing , nothing gets back , even build number in settings doesn't change
Then i tried firmware finder , downloaded pra-la1c185b121 , and when trying flashing it , erecovery fails
Any help please to flash a stock fresh rom ?
Model gr3 3017 - PRA-LA1C185B120

Any help ?

Try with older firmware with build number 101

salah.kayssi said:
Hi guys
Few days ago i unlocked the bootloader of my device then it made a factory reset and every thing gone , default theme deleted , the apps that come with the device also deleted , and the most annoying thing that locking screen widget gone to
I searched for a rom in the forum and found this
https://forum.xda-developers.com/trash/stock-rom-pra-la1c185b101-emui-5-0-t3746017
When i try to flash it using SD card and dload , nothing happen , just locks the bootloader and erases every thing , nothing gets back , even build number in settings doesn't change
Then i tried firmware finder , downloaded pra-la1c185b121 , and when trying flashing it , erecovery fails
Any help please to flash a stock fresh rom ?
Model gr3 3017 - PRA-LA1C185B120
Click to expand...
Click to collapse
eRecovery is the only way that worked for me, use it to download and flash stock firmware

dz3ro said:
eRecovery is the only way that worked for me, use it to download and flash stock firmware
Click to expand...
Click to collapse
I didn't know that eRecovery can download a stock firmware!!
How can i download it using eRecovery?

Susan Dahal said:
Try with older firmware with build number 101
Click to expand...
Click to collapse
I tried as i mentioned in the link , it doesn't fail , but it also doesn't retrieve neither the themes app nor the screen off widget
And the built number still b120

salah.kayssi said:
I didn't know that eRecovery can download a stock firmware!!
How can i download it using eRecovery?
Click to expand...
Click to collapse
Here is a quick tutorial :
Make sure you backup your important files because it will factory reset
1- Turn off your phone
2- Plug your phone to PC using USB cable
3- Long press VOL UP + POWER untill you enter eRecovery
(You can unplug the USB cable after you enter eRecovery)
4- Choose the option : Download latest version and recovery
It will start the wi-fi and connect, then it will find your latest firmware automatically and start downloading and installing.
i hope this helps...

dz3ro said:
Here is a quick tutorial :
Make sure you backup your important files because it will factory reset
1- Turn off your phone
2- Plug your phone to PC using USB cable
3- Long press VOL UP + POWER untill you enter eRecovery
(You can unplug the USB cable after you enter eRecovery)
4- Choose the option : Download latest version and recovery
It will start the wi-fi and connect, then it will find your latest firmware automatically and start downloading and installing.
i hope this helps...
Click to expand...
Click to collapse
Getting package info failed

nikkas02 said:
Getting package info failed
Click to expand...
Click to collapse
Maybe it's because you have very old firmware because it didn't used to work for me before when i had old firmware, i will upload my eRecovery from b194 for you and you can flash it and try it maybe it will work.
Edit :
here you go : http://www.mediafire.com/file/2jc44ur7u4akaqz/eRecovery.img
Put it in fastboot folder and flash it with this command :
fastboot flash recovery2 eRecovery.img

I Can't exit fastboot mode

In the beginning I wanted to upgrade my device to 9.0 ( Korean version ) then when i Update my phone Through LGUP show error message (Approximately 75%)
Then I turn off the phone Then when I want to get in Downloading mode Is directed to fastboot
so I stuck in fastboot
please HELP

Try to force reboot via holding power + vol down for 8 seconds.

themostunique said:
Try to force reboot via holding power + vol down for 8 seconds.
Click to expand...
Click to collapse
Doesn’t work :crying:

Try draining the phone's battery via otg, then hold vol up and plug in usb to computer to download mode.

@a_al_khaled1 you need to provide a bit more info and answer to those questions:
1. Were you bootloader unlocked?
2. What option and partitions you have checked to flash via LGUP?

vlad48 said:
@a_al_khaled1 you need to provide a bit more info and answer to those questions:
1. Were you bootloader unlocked?
2. What option and partitions you have checked to flash via LGUP?
Click to expand...
Click to collapse
1- No
2- update
This is what appears when I try to boot or download mode https://drive.google.com/file/d/1xvEqf1FszSxvMXhJMq-QFM2yIIXwAre7/view?usp=drivesdk

Now we are getting there...
Can you remember OS Oreo version you were using and if your device has AT&T branding or it was a Google - Fi one?

vlad48 said:
@a_al_khaled1 you need to provide a bit more info and answer to those questions:
1. Were you bootloader unlocked?
2. What option and partitions you have checked to flash via LGUP?
Click to expand...
Click to collapse
vlad48 said:
Now we are getting there...
Can you remember OS Oreo version you were using and if your device has AT&T branding or it was a Google - Fi one?
Click to expand...
Click to collapse
V350ULM10i
Amazon version

Now everything is clear.
Try holding and not releasing volume - and power while the phone boots and reboots into fastboot 6 times in a row then release only Vol- while still holding power - phone will change active boot slot and will boot into slot _b (if it was bootable before of course).
If this does not happen then your only way to restore it is via JTAG.
Contact this guy.

vlad48 said:
Now everything is clear.
Try holding and not releasing volume - and power while the phone boots and reboots into fastboot 6 times in a row then release only Vol- while still holding power - phone will change active boot slot and will boot into slot _b (if it was bootable before of course).
If this does not happen then your only way to restore it is via JTAG.
Contact this guy.
Click to expand...
Click to collapse
That what happen when I try to get to download mode https://drive.google.com/file/d/14mKlTCVSYj4bA0LHZ84KfJ4EaAm9608N/view?usp=drivesdk

Yes, I know - you have 75% Korean pie with leftovers from Amazon Oreo (your abl misc and ftm partitions are still from Oreo while the rest is from Pie).
You can enter into 9008 mode for JTAG flashing so just contact the guy and ask him to flash to you back amazon LAF partition, afterwards you will have properly working download mode and you can restore the whole amazon kdz.

@vlad48 I am in the same situation, however mine is the AT&T variety, I tried swapping to boot_b a couple times and no luck. Is my only option to do the 9008 mode for JTAG flashing?
E: I have backups of Boot_a/b, abl_a/b, and xdl_a/b if that is worth anything. However my phone isn't detected by LGUP anymore. I was on oreo 8.0.0 with the july 2018 security update.

Yes - the only way apart from sending it back to AT&T is to flash back your Oreo partitions via JTAG - in your case easiest way will be to re-lash US Open KDZ.

a_al_khaled1 said:
In the beginning I wanted to upgrade my device to 9.0 ( Korean version ) then when i Update my phone Through LGUP show error message (Approximately 75%)
Then I turn off the phone Then when I want to get in Downloading mode Is directed to fastboot
so I stuck in fastboot
please HELP
Click to expand...
Click to collapse
I can't get into fastboot.

Shawnashley said:
I can't get into fastboot.
Click to expand...
Click to collapse
What variant do you have?
If you're running AT&T firmware, you don't have fastboot flash commands.
You have to convert to another firmware via Dev Patched LGUP.

ChazzMatt said:
What variant do you have?
If you're running AT&T firmware, you don't have fastboot flash commands.
You have to convert to another firmware via Dev Patched LGUP.
Click to expand...
Click to collapse
Is there a specific firmware you would recommend? Thanks in advance

Shawnashley said:
Is there a specific firmware you would recommend? Thanks in advance
Click to expand...
Click to collapse
The AT&T V35 I bought from @bacon612 was flashed to Google Fi firmware.

This or US unlocked 'i' are good candidates.
https://lg-firmwares.com/downloads-file/19020/V350ULM10i_00_NAO_US_OP_0221.kdz
Takes ages to download...
The above is US Unlocked firmware for the v35 Feb Security patch.
Sent from my GM1915 using Tapatalk

ChazzMatt said:
The AT&T V35 I bought from @bacon612 was flashed to Google Fi firmware.
Click to expand...
Click to collapse
bacon612 said:
This or US unlocked 'i' are good candidates.
https://lg-firmwares.com/downloads-file/19020/V350ULM10i_00_NAO_US_OP_0221.kdz
Takes ages to download...
The above is US Unlocked firmware for the v35 Feb Security patch.
Sent from my GM1915 using Tapatalk
Click to expand...
Click to collapse
I'm going to look into that one. Thanks for the recommendation. Also, I was able to use LGUP to flash the Korean KDZ. It seemed to work fine, and does now. It flashed perfect, my data was intact until I had to restart my phone a while later and then it was all gone. Looked factory out of the box. However it is smooth as a baby's bottom now.

Shawnashley said:
I'm going to look into that one. Thanks for the recommendation. Also, I was able to use LGUP to flash the Korean KDZ. It seemed to work fine, and does now. It flashed perfect, my data was intact until I had to restart my phone a while later and then it was all gone. Looked factory out of the box. However it is smooth as a baby's bottom now.
Click to expand...
Click to collapse
Which version of LGUP you used? and dll file PLz