Related
Hi guys,
I own a Galaxy Note 4 (N910H) and have rooted it before without any problem.
Long story short I wanted to install a custom rom and on the instruction says I need to reset my device to factory before I actually install it (because mine is 4.4.4).
I successfully reset it back to factory settings, however when I tried to install the rom an error occured.
When my device restarted it goes into a boot loop.
So I go into the recovery mode and delete the caches and what not (even selecting the reset to factory setting again).
When my device restart it is stuck at the boot sreen (samsung galaxy blablabla) and it DOESNT LOOP, it just stuck there and I am unable to go into recovery mode.
I tried to reflash it using odin (i can access the downloading mode) up to no avail.
My device is detected by odin (com:x) but when I pressed start it stuck at setup connection and after a while I got the Fail message.
Now I am at a loss and have no idea what else to do. Tried kies, doesnt work either.
Kies doesnt even recognize the connection to my phone.
Any help would be appreciated.
NB: I'm a newb at this so please bear with me (and yes I kind of ****ed up)
Thanks
xverdex said:
Hi guys,
I own a Galaxy Note 4 (N910H) and have rooted it before without any problem.
Long story short I wanted to install a custom rom and on the instruction says I need to reset my device to factory before I actually install it (because mine is 4.4.4).
I successfully reset it back to factory settings, however when I tried to install the rom an error occured.
When my device restarted it goes into a boot loop.
So I go into the recovery mode and delete the caches and what not (even selecting the reset to factory setting again).
When my device restart it is stuck at the boot sreen (samsung galaxy blablabla) and it DOESNT LOOP, it just stuck there and I am unable to go into recovery mode.
I tried to reflash it using odin (i can access the downloading mode) up to no avail.
My device is detected by odin (com:x) but when I pressed start it stuck at setup connection and after a while I got the Fail message.
Now I am at a loss and have no idea what else to do. Tried kies, doesnt work either.
Kies doesnt even recognize the connection to my phone.
Any help would be appreciated.
NB: I'm a newb at this so please bear with me (and yes I kind of ****ed up)
Thanks
Click to expand...
Click to collapse
If I'm not mistaken you have Kies installed? If that is the case I would recommend you uninstall it. Then manually download the Samsung USB drivers
http://developer.samsung.com/technical-doc/view.do?v=T000000117
Reboot your PC just to be sure.
Then make sure your device isn't connected to the charger or computer and remove the battery and after 10 seconds reinsert the battery and manually boot into Download Mode (Home + Volume Down while holding the power button.)
Then connect your phone to the your PC and run Odin as Admin and try to flash the firmware.
I would also recommend that the firmware you are flashing is the correct one and is not corrupted.
You can check the firmware from Sammobile and after the download check the MD5Sum and then extract the zip file to get the firmware file.
Good luck and report back.
Sent from my trltexx using XDA Premium 4 mobile app
I had the same problem , make sure to properly install samsung drivers
if everything is still messed up , try a fresh copy of windows and install samsung drivers and the latest " Flash Tool "
i hope this fix up ur problem
Battlehero said:
Reboot your PC just to be sure.
Then make sure your device isn't connected to the charger or computer and remove the battery and after 10 seconds reinsert the battery and manually boot into Download Mode (Home + Volume Down while holding the power button.)
Then connect your phone to the your PC and run Odin as Admin and try to flash the firmware.
I would also recommend that the firmware you are flashing is the correct one and is not corrupted.
You can check the firmware from Sammobile and after the download check the MD5Sum and then extract the zip file to get the firmware file.
Good luck and report back.
Sent from my trltexx using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Just to make sure, should I put the MD5 file to bootloader or AP/PDA?
Thank you for the help, I will try your solution after I get back from work
xverdex said:
Just to make sure, should I put the MD5 file to bootloader or AP/PDA?
Thank you for the help, I will try your solution after I get back from work
Click to expand...
Click to collapse
If you are using Odin version 3.09 or above it's AP, otherwise it's PDA.
Sent from my SM-N910F using XDA Premium 4 mobile app
Battlehero said:
If you are using Odin version 3.09 or above it's AP, otherwise it's PDA.
Sent from my SM-N910F using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks Battlehero! now I finally get my galaxy note back to work again.
Now let's say if I want to Root my device again, is it as simple as installing CWM or TWRP and then install a custom rom?
xverdex said:
Thanks Battlehero! now I finally get my galaxy note back to work again.
Now let's say if I want to Root my device again, is it as simple as installing CWM or TWRP and then install a custom rom?
Click to expand...
Click to collapse
If you want to root your current rom then install a custom recovery (TWRP) recommended then flash SuperSU Current release: https://download.chainfire.eu/740/SuperSU/BETA-SuperSU-v2.49.zip
You can always hit the 'Thanks Button' to show your appreciation. It's nice to see you fixed your issue.
Battlehero said:
If you want to root your current rom then install a custom recovery (TWRP) recommended then flash SuperSU Current release:
You can always hit the 'Thanks Button' to show your appreciation. It's nice to see you fixed your issue.
Click to expand...
Click to collapse
Done with the 'Thanks Button'.
Thanks for the help!
Cheers mate
hello friends,
i tried to update my Note 4 (N910c) but it is now boot looping and i couldn't fix it. i tried to get into recovery but it is not. only odin mode. i flashed stock, cwm and twrp recoveries too. but non of them are working. but for the firmware i don't know the region of the phone, i bought it from ebay and it came from dubai. i really need help guys. i have tried all i know and non of it helped.
thanks
nemo0002253 said:
hello friends,
i tried to update my Note 4 (N910c) but it is now boot looping and i couldn't fix it. i tried to get into recovery but it is not. only odin mode. i flashed stock, cwm and twrp recoveries too. but non of them are working. but for the firmware i don't know the region of the phone, i bought it from ebay and it came from dubai. i really need help guys. i have tried all i know and non of it helped.
thanks
Click to expand...
Click to collapse
Download this all samsung recovery and flash via odin. Helped for me with bootloop.
https://www.dropbox.com/s/c3byn50jvboo7nv/All samsung recovery.tar?dl=0
Thank you @dewingerd for your reply.
I have tried the recovery and it is still stuck at the logo.
nemo0002253 said:
Thank you @dewingerd for your reply.
I have tried the recovery and it is still stuck at the logo.
Click to expand...
Click to collapse
Install the latest verson of kies on you computer.
Then in kies under "Tools" choose "firmware upgrade and initialisation".
Then give you model number "SM-N910?", next give serial number of the phone (you can find that on the sticker behind the battery in your phone).
Then you get a message that the "device can be initialised to its original setting"
Press ok and ok again. Then put your phone in download mode and connect to the computer and press "start upgrade".
Not working @dewingerd
Kies doesnt detect my phone. Bt drivers are installed correctly. It only opens in downloading mode
nemo0002253 said:
Not working @dewingerd
Kies doesnt detect my phone. Bt drivers are installed correctly. It only opens in downloading mode
Click to expand...
Click to collapse
Happened to me also 2 days ago.
Your mobile only can enter download mode ? but when u try to go to recovery or just power it , nothing happened , right ??
Well , you should do as @dewingerd said carefully do these steps :
Initially you need to upgrade kies to the latest version (mine is : 3.2.15072_2) or this will fail cuz it failed with me the first time.
1) take of your battery , and write down your Serial number .
2) open kies first.
3) open mobile in download mode then connect it . KIES WILL NOT RECOGNIZE THE MOBILE
4) Choose : Tools >> Firmware upgrade and initialisation
5) Kies will ask you about your mobile name , TYPE : SM-N910C , ALL CAPITAL LETTERS OR KIES WILL NOT RECOGNIZE IT
6) if you did not type the name correctly , you will get a message that kies does not know this name , so start again , type SM-N910C
7) then you will get another box asks for your serial number , enter it (Not case sensitive).
8) Kies then will inform you that it is going to prepare the phone and download the firmware for your device and that you have to connect it in download mode.
9) unplug your mobile , plug it again and click start.
10) Now the process is going to take a while depending on your internet connection (downloading about 2GB), do not unplug the phone and do not allow your laptop/PC to sleep.
11) cautions that I read before : you better not connect or disable any usb devices during the process.
12) suddenly , you will hear you mobile starting up again , congratulations
Q: What about my data , apps and stuff ?
A: All is gone except for those on your External card , sorry , nothing can be done for that (May be you should remove your SDcard first just in case).
Good Luck
APCOtech said:
Well , do as @dewingerd said
Initially you need to upgrade kies to the latest version (mine is : 3.2.15072_2) or this will fail cuz it failed with me the first time.
1) take of your battery , and write down your Serial number .
2) open kies first.
3) open mobile in download mode then connect it . KIES WILL NOT RECOGNIZE THE MOBILE
4) Choose : Tools >> Firmware upgrade and initialisation
5) Kies will ask you about your mobile name , TYPE : SM-N910C , ALL CAPITAL LETTERS OR KIES WILL NOT RECOGNIZE IT
6) if you did not type the name correctly , you will get a message that kies does not know this name , so start again , type SM-N910C
7) then you will get another box asks for your serial number , enter it (Not case sensitive).
8) Kies then will inform you that it is going to prepare the phone and download the firmware for your device and that you have to connect it in download mode.
9) unplug your mobile , plug it again and click start.
10) Now the process is going to take a while depending on your internet connection (downloading about 2GB), do not unplug the phone and do not allow your laptop/PC to sleep.
11) cautions that I read before : you better not connect or disable any usb devices during the process.
12) suddenly , you will hear you mobile starting up again , congratulations
Q: What about my data , apps and stuff ?
A: All is gone except for those on your External card , sorry , nothing can be done for that (May be you should remove your SDcard first just in case).
Good Luck
Click to expand...
Click to collapse
I have done all you have stated here and still end up on the Samsung boot logo, i have flash a stock firmware from sammobile and my note 4 still ends up on the Samsung boot animation logo
please help i don't know what else to do
Ify2gen2 said:
I have done all you have stated here and still end up on the Samsung boot logo, i have flash a stock firmware from sammobile and my note 4 still ends up on the Samsung boot animation logo
please help i don't know what else to do
Click to expand...
Click to collapse
Now , this is another case , as long as you can press power and the mobile starts up , showing the first logo , and next the animation , then this is no big problem .
just first tell me what is your note4 variant ? C F H ? can you root and install recovery ?
What happened to your mobile and resulted this ?
APCOtech said:
Now , this is another case , as long as you can press power and the mobile starts up , showing the first logo , and next the animation , then this is no big problem .
just first tell me what is your note4 variant ? C F H ? can you root and install recovery ?
What happened to your mobile and resulted this ?
Click to expand...
Click to collapse
thank for your quick reply, my variant is n910c ans yes i can still install recovery. I upgraded from 5.0.1 to 5.1.1 poland using odin and everything works well. I flashed Googy N4 kernel using TWRP 2.8.1.1 and everything still works well. My problem began when I made a backup of my 5.1.1 stock rom and flash infinity rom which end up in bootloop. So I tried restoring my backup but whenever it got to DATA RESTORING it keeps failing and flashing back the 5.1.1 poland stock firmware through odin keeps ending up on the SAMSUNG boot animation screen.
Ify2gen2 said:
thank for your quick reply, my variant is n910c ans yes i can still install recovery. I upgraded from 5.0.1 to 5.1.1 poland using odin and everything works well. I flashed Googy N4 kernel using TWRP 2.8.1.1 and everything still works well. My problem began when I made a backup of my 5.1.1 stock rom and flash infinity rom which end up in bootloop. So I tried restoring my backup but whenever it got to DATA RESTORING it keeps failing and flashing back the 5.1.1 poland stock firmware through odin keeps ending up on the SAMSUNG boot animation screen.
Click to expand...
Click to collapse
which version of googy kernel ?
Well whatever , TWRP 2.8.1.1 won't work with 5.1.1 bootloader , try TWRP 2.8.7.0
APCOtech said:
which version of googy kernel ?
Well whatever , TWRP 2.8.1.1 won't work with 5.1.1 bootloader , try TWRP 2.8.7.0
Click to expand...
Click to collapse
GoogyMax N4 v2.0. I have tried TWRP 2.8.7.0 but still the same.
After flashing stock firmware using odin, on my stock recovery i found this error
"E:failed to mount /efs (invalid argument)
dm-verity verification failed.......
need to check drk first......."
I have search through the internet but i can't get a clear picture of what it meant.
Does anyone has an idea of what it meant and how to resolve the error?
Ify2gen2 said:
GoogyMax N4 v2.0. I have tried TWRP 2.8.7.0 but still the same.
After flashing stock firmware using odin, on my stock recovery i found this error
"E:failed to mount /efs (invalid argument)
dm-verity verification failed.......
need to check drk first......."
I have search through the internet but i can't get a clear picture of what it meant.
Does anyone has an idea of what it meant and how to resolve the error?
Click to expand...
Click to collapse
Hi again ,
Looks like a locked phone and was unlocked in a wrong way or something like that.
read this thread , looks like the same problem.
in short , you need the 4 files firmware to be flashed via oden and as stated in page 2 there , you flash them without pit file.
You can find the 4-files firmware here but this is not 5.1.1 firmware , give it a try , if failed too , search for 5.1.1 4-files firmware.
here is another site but I do not really know if they are 4-files or the single file .
Good luck.
APCOtech said:
Hi again ,
Looks like a locked phone and was unlocked in a wrong way or something like that.
read this thread , looks like the same problem.
in short , you need the 4 files firmware to be flashed via oden and as stated in page 2 there , you flash them without pit file.
You can find the 4-files firmware here but this is not 5.1.1 firmware , give it a try , if failed too , search for 5.1.1 4-files firmware.
here is another site but I do not really know if they are 4-files or the single file .
Good luck.
Click to expand...
Click to collapse
thanks i will give a try and post my feedback
APCOtech said:
Hi again ,
Looks like a locked phone and was unlocked in a wrong way or something like that.
read this thread , looks like the same problem.
in short , you need the 4 files firmware to be flashed via oden and as stated in page 2 there , you flash them without pit file.
You can find the 4-files firmware here but this is not 5.1.1 firmware , give it a try , if failed too , search for 5.1.1 4-files firmware.
here is another site but I do not really know if they are 4-files or the single file .
Good luck.
Click to expand...
Click to collapse
All methods on the links you pasted didn't work, however i have been able to resolve it using this method from this link below
http://www.youtube.com/watch?v=HVOOwZs-kwQ
thanks for your support and help.
Ify2gen2 said:
All methods on the links you pasted didn't work, however i have been able to resolve it using this method from this link below
http://www.youtube.com/watch?v=HVOOwZs-kwQ
thanks for your support and help.
Click to expand...
Click to collapse
You are welcome , what matters is your phone is back
APCOtech said:
You are welcome , what matters is your phone is back
Click to expand...
Click to collapse
yes my phone is back but not fully back. I am having a bad IMEI, phone is not registering on network and i have mistakenly delected my EFS backup........my bad!
Can i get a working EFS backup of the same phone model (n910c) and restore it on my note 4 n910c? will it restore back my IMEI?
APCOtech said:
Well , you should do as @dewingerd said carefully do these steps :
Initially you need to upgrade kies to the latest version (mine is : 3.2.15072_2) or this will fail cuz it failed with me the first time.
1) take of your battery , and write down your Serial number .
2) open kies first.
3) open mobile in download mode then connect it . KIES WILL NOT RECOGNIZE THE MOBILE
4) Choose : Tools >> Firmware upgrade and initialisation
5) Kies will ask you about your mobile name , TYPE : SM-N910C , ALL CAPITAL LETTERS OR KIES WILL NOT RECOGNIZE IT
6) if you did not type the name correctly , you will get a message that kies does not know this name , so start again , type SM-N910C
7) then you will get another box asks for your serial number , enter it (Not case sensitive).
8) Kies then will inform you that it is going to prepare the phone and download the firmware for your device and that you have to connect it in download mode.
9) unplug your mobile , plug it again and click start.
10) Now the process is going to take a while depending on your internet connection (downloading about 2GB), do not unplug the phone and do not allow your laptop/PC to sleep.
11) cautions that I read before : you better not connect or disable any usb devices during the process.
12) suddenly , you will hear you mobile starting up again , congratulations
Q: What about my data , apps and stuff ?
A: All is gone except for those on your External card , sorry , nothing can be done for that (May be you should remove your SDcard first just in case).
Good Luck
Click to expand...
Click to collapse
Hi APCOtech im trying to solve mine too.. But my device not suppotred with kies3.. Any suggestion?? My device SM-N910S
Thanks man.
vzaen said:
Hi APCOtech im trying to solve mine too.. But my device not suppotred with kies3.. Any suggestion?? My device SM-N910S
Thanks man.
Click to expand...
Click to collapse
Try to download the appropriate firmware with Samfirm_reborn0.3.6.2 you'll find on Github. Unpack the .zip and start as admin.
Insert full device name and region and additionally check "binary nature" box.
It should download the latest! ROM multiple file format from Samsungs servers directly, at least it did for all my 7 devices (just in case) before I rooted them.
BUT I know that for N910V nothing is found and don't know about S model.
KIES I never used as I read it sometimes conflicts with Odin.
If files are downloaded flash with Odin adding the different files in their input fields. (selve explaining names)
Hello,
I am from Greece and Ive bought from Vodafone a Huawei P9 lite vns-l21 before one month. Ive installed the nougat rom 370 with firmware finder but I made a mistake choozing the NRD-90M test key. So I begun to roll back to Marshmallow. Everything ok. Then Itried to install an other rom from firmware finder(i think C432b371) and again NRD-90M test key...
Again roll back to Marshmallow...so in the first step when i was trying to install with dload method the Huawei P9 Lite Rollback Package For L21C432 (EU) my phone stucked on boot loop but I had fastboot. Then I have unlocked the bootloader to see if there is anything that i can do with srk tool and now i have a beautifull bricked phone stuck :
"Your device has been unlocked and can't be trusted.
you device is booting now"
In this point nothing happens, I can not go to fast boot, No recovery mode, The hardware keys not doing anything, only resetting the phone in loop..
I dont know what to do and Huawei wants 215euro to fix my phone.
My mistake I know but is there enything that i can do know? Its a new phone!
Sorry for my english
I would suggest getting an sdcard and creating a dload folder inside, then putting an official rom UPDATE.APP file inside the dload folder and try 3button method
o-w-a said:
I would suggest getting an sdcard and creating a dload folder inside, then putting an official rom UPDATE.APP file inside the dload folder and try 3button method
Click to expand...
Click to collapse
Thanks for the advice but I have already tried that with stock rom B161 and nothing happens with 3 button method. Still in the same situation.. Everything i do with the buttons the phone resetting and stays on until the battery is dead..
ioanpara said:
Thanks for the advice but I have already tried that with stock rom B161 and nothing happens with 3 button method. Still in the same situation..
Click to expand...
Click to collapse
do you get verification error or is it just stuck at "your devices is booting now"
o-w-a said:
do you get verification error or is it just stuck at "your devices is booting now"
Click to expand...
Click to collapse
Stuck on "your device is booting now".
ioanpara said:
Stuck on "your device is booting now".
Click to expand...
Click to collapse
As far as I understand, you can't even power off your device which is a problem since the 3button method won't work if you can't power off the device.
o-w-a said:
As far as I understand, you can't even power off your device which is a problem since the 3button method won't work if you can't power off the device.
Click to expand...
Click to collapse
Exactly!
I am still in the same situation... Anyone who knows what to do?
ioanpara said:
Hello,
I am from Greece and Ive bought from Vodafone a Huawei P9 lite vns-l21 before one month. Ive installed the nougat rom 370 with firmware finder but I made a mistake choozing the NRD-90M test key. So I begun to roll back to Marshmallow. Everything ok. Then Itried to install an other rom from firmware finder(i think C432b371) and again NRD-90M test key...
Again roll back to Marshmallow...so in the first step when i was trying to install with dload method the Huawei P9 Lite Rollback Package For L21C432 (EU) my phone stucked on boot loop but I had fastboot. Then I have unlocked the bootloader to see if there is anything that i can do with srk tool and now i have a beautifull bricked phone stuck :
"Your device has been unlocked and can't be trusted.
you device is booting now"
In this point nothing happens, I can not go to fast boot, No recovery mode, The hardware keys not doing anything, only resetting the phone in loop..
I dont know what to do and Huawei wants 215euro to fix my phone.
My mistake I know but is there enything that i can do know? Its a new phone!
Sorry for my english
Click to expand...
Click to collapse
Hmm I dont get why they want 215 euro to exchange the storage chip.
I guess your phone is pretty much a brick now have fun. Lol sry
I had a similar problem with the boot-loop.
Press PowerOff until the screen goes black, and then immediately leave power-off and press Power Off + Volume Up for ever until the phone boots normally.
That's what I did and worked for me.
Can you boot to fastboot, if you can you can recover it with DC-Phoenix tool.
Dejan Kruljac said:
Can you boot to fastboot, if you can you can recover it with DC-Phoenix tool.
Click to expand...
Click to collapse
No he cant, I have the same problem. Cant fastboot, adb or 3 button method. Even tried unplugging battery then doing 3 button method.
Anyone sopve this problem with no fastboot no recovery no 3 buttons mode?
try to drain the battery, keep screen on, or keep phone on until battery is 0%, you can't turn it on . keep volume down and power pressed, plug usb to pc , if you're lucky fastboot could be ok
Hi there, I also managed to brick my P9Lite - no recovery, no fastboot. After draining the battery completly the phone starts fine but I can't install system updates. I guess I have to live with that. Unfortunately I can't activate bluetooth. Does anyone has an idea how to get bluetooth working again?
idk for your BT issue , but did you try Firmware Finder for Huawei ? easy to use, you will probably able to dl an update. don't use "small " package OTA, use full firmware, about1.6 or 1.8 Go, may could fix your BT.
sonneper said:
idk for your BT issue , but did you try Firmware Finder for Huawei ? easy to use, you will probably able to dl an update. don't use "small " package OTA, use full firmware, about1.6 or 1.8 Go, may could fix your BT.
Click to expand...
Click to collapse
didn't work out as Firmware Finder is only another way to find a firmware but not another way to install the firmware...
Hello guys,
sorry if i write this but i think necessary to grab best helps..
Try to describe problem in detail (ex. - i was upgrading/downgrading from..........to............ firmware and it bricks, etc...)
Your latest working phone/system/firmware (ex. - mine was VNS-L31C432B381-before i upgraded to EliteRom).
Some information changes according to the country / region of the world in which you live,
so they are useful for those who help you to redirect to the correct thread / give right suggestions...
All the best guyz
didn't work out as Firmware Finder is only another way to find a firmware but not another way to install the firmware...
Yes , a way to get last firmware, or firmware you want through the huawei update app. Without firmware finder ,no way to " force" huawei update app to install anything you want on your device
Sorry for the late response, I'm reading the thread right now. Firmware Finder can also be used to install firmware through eRecovery. Install Firmware Finder for Windows: http://pro-teammt.ru/projects/hwff/v2/GetLatestVersion.action
You need to write down your existing and change both DNS addresses in your router to: 81.177.139.39
You also need to deactivate IPv6 protocol.
Open FirmwareFinderRewrite.exe, go to "common base" and search VNS-LXXCXXX (Your model and customization). Copy the link in "changelog" not of the newest, but of the 2nd or 3rd youngest firmware. Check if it has been approved by pasting the link under the tab with the checkmark (5th position counting from left). If the response is "This firmware was approved to install" you are ready to go.
Copy the same link in the proxy field (the cloud symbol, 4th position counting from left). Click on "set" and "register update".
Now switch off your phone, press "Vol+" and simultaneously connect it to the PC. You enter eRecovery now. Tap on "Download latest version and recovery". Your phone should start the download now, after a couple percent you can reset your router settings, the download will continue. If all is well, the firmware will then be installed.
Hello, i wanted to mount / into rw but i always have an error, can someone tell me why and how can i fix this ? Thank you.
Here is some screenshots.
Yakia said:
Hello, i wanted to mount / into rw but i always have an error, can someone tell me why and how can i fix this ? Thank you.
Here is some screenshots.
Click to expand...
Click to collapse
Its showing because your device is not rooted. Mounting system requires root previlage in your device.
Root your device and try again.
Hit thanks button if you find this helpful
Happy flashing
sltushar said:
Its showing because your device is not rooted. Mounting system requires root previlage in your device.
Root your device and try again.
Hit thanks button if you find this helpful
Happy flashing
Click to expand...
Click to collapse
Hum, don't take this bad but, you think i will really try to mount / when i'm not already rooted ?
sltushar said:
Its showing because your device is not rooted. Mounting system requires root previlage in your device.
Root your device and try again.
Hit thanks button if you find this helpful
Happy flashing
Click to expand...
Click to collapse
hello again, i think i made a mistake, in my root explorer i tried to put /system on read and now my device is stuck, i can't reboot it, the screen is on and black, the two buttons have light what can i do please help i don't wanna brick it (maybe i already bricked it now) please
Yakia said:
hello again, i think i made a mistake, in my root explorer i tried to put /system on read and now my device is stuck, i can't reboot it, the screen is on and black, the two buttons have light what can i do please help i don't wanna brick it (maybe i already bricked it now) please
Click to expand...
Click to collapse
Listen
Download the mena firmware, and then press and hold power button and volume down button it will force reboot your device, then your phone may get rebooted and go on black screen
Dont worry, take a deep breath and keep patience
And do the following steps
Install OST and follow the steps down here
The instructions will be for OST tool and for mena firmware but you can install Chinese varient too
Install OST tool
Now
1. Open ur directory, c:/program files x86/OST and replace the online update tool from there and delete the config file,
AND REMEMBER THIS IS VERY IMPORTANT,
2. Open online update tool from ur directory only, from c:/program files x86/OST only, donot start it from any shortcut created on desktop or from start menu, just start it from its original directory,
if it still gives error about microsoft error warning, try fresh replacing ur online update tool again from the zip
And start the program from there only, once it successfully started
3. Click next, then choose the firmware mena, that is
PLE-3320-0-00WW-A02.nb0 file your one could be CNxxxx) and put ur phone into bootloader,
For now what you need to do is connect your phone and keep holding your power button for a while till it switches off your device and leave the button once if it turned of before it get rebooted
It should automatically take you to boot loader or else try this step for 1-2 time again you will surely rebooted to bootloader
Once it boot to bootloader
click next button on OST, now the first time u may stuck on flashing splash file and ur phone could restarted
4. Follow all the same steps again
5. Start the tool again
The tool will surely give u error for Microsoft.net
Dont panic
Close it and replace the online update tool again
6. Remember no matter if u replace the file before error, it will give error for one time surely
7. Replace it again with online updating tool and the start it from the directory
8. Now Click next, then choose the firmware mena, that is
PLE-3320-0-00WW-A02.nb0 ( your one could be CNxxxx) file and put ur phone into bootloader
Same as above i told once to goto the bootloader by connecting phone and keep holding power button untin it get rebooted and release the power button just after the phone turns off and before it get rebooted.
9. Now it should be connected and click next this time your phone will get flashed successfully...if it give error again, then try one more time u will be successfully installed the mena firmware
I know its a long procedure but it will help you
If you can reboot to 9008 mod then tell me about that
I will give u another instructions for that
But first try the above method
Hit thanks button if you find this helpful
Happy flashing
sltushar said:
Listen
Download the mena firmware, and then press and hold power button and volume down button it will force reboot your device, then your phone may get rebooted and go on black screen
Dont worry, take a deep breath and keep patience
And do the following steps
Install OST and follow the steps down here
The instructions will be for OST tool and for mena firmware but you can install Chinese varient too
Install OST tool
Now
1. Open ur directory, c:/program files x86/OST and replace the online update tool from there and delete the config file,
AND REMEMBER THIS IS VERY IMPORTANT,
2. Open online update tool from ur directory only, from c:/program files x86/OST only, donot start it from any shortcut created on desktop or from start menu, just start it from its original directory,
if it still gives error about microsoft error warning, try fresh replacing ur online update tool again from the zip
And start the program from there only, once it successfully started
3. Click next, then choose the firmware mena, that is
PLE-3320-0-00WW-A02.nb0 file your one could be CNxxxx) and put ur phone into bootloader,
For now what you need to do is connect your phone and keep holding your power button for a while till it switches off your device and leave the button once if it turned of before it get rebooted
It should automatically take you to boot loader or else try this step for 1-2 time again you will surely rebooted to bootloader
Once it boot to bootloader
click next button on OST, now the first time u may stuck on flashing splash file and ur phone could restarted
4. Follow all the same steps again
5. Start the tool again
The tool will surely give u error for Microsoft.net
Dont panic
Close it and replace the online update tool again
6. Remember no matter if u replace the file before error, it will give error for one time surely
7. Replace it again with online updating tool and the start it from the directory
8. Now Click next, then choose the firmware mena, that is
PLE-3320-0-00WW-A02.nb0 ( your one could be CNxxxx) file and put ur phone into bootloader
Same as above i told once to goto the bootloader by connecting phone and keep holding power button untin it get rebooted and release the power button just after the phone turns off and before it get rebooted.
9. Now it should be connected and click next this time your phone will get flashed successfully...if it give error again, then try one more time u will be successfully installed the mena firmware
I know its a long procedure but it will help you
If you can reboot to 9008 mod then tell me about that
I will give u another instructions for that
But first try the above method
Hit thanks button if you find this helpful
Happy flashing
Click to expand...
Click to collapse
hello first thank you very much for your answer, but my phone when i plug it to my pc it recognize it as an cd i don't know why
Yakia said:
hello first thank you very much for your answer, but my phone when i plug it to my pc it recognize it as an cd i don't know why
Click to expand...
Click to collapse
For your kind information brother, u just bricked your phone.
Bro please follow the instructions that I provide u
Please follow it carefully
sltushar said:
For your kind information brother, u just bricked your phone.
Bro please follow the instructions that I provide u
Please follow it carefully
Click to expand...
Click to collapse
ok thank you but one question how can ost la recognize my phone if my pc can't do it properly (sorry if i'm maybe pissing you off but i need info i don't wanna mess up) ?
Yakia said:
ok thank you but one question how can ost la recognize my phone if my pc can't do it properly (sorry if i'm maybe pissing you off but i need info i don't wanna mess up) ?
Click to expand...
Click to collapse
Look every step is written, your phone will be recognised once you start ost tool
When u start the tool the ost will ask you to browse the firmware file with .nb0 extension
Then it will ask you to connect the phone
Now connect your phone
Then keep holding volume down and power button together, once your phone get turned off then it will show u that its been booted into bootloader or download mode, click next on ost tool and it will start flashing your device
Thats all
Hit thanks button if you find this helpful
Happy flashing
sltushar said:
For your kind information brother, u just bricked your phone.
Bro please follow the instructions that I provide u
Please follow it carefully
Click to expand...
Click to collapse
hey man ! i'm pretty happy because the situation is clearly better now, my phone discharged today and i putted it in charge the charging logo was here, i tried to power it on but it always boots on twrp recovery what should i do
sltushar said:
Look every step is written, your phone will be recognised once you start ost tool
Click to expand...
Click to collapse
man i just discovered that in twrp's file manager the /system folder only contains a "bin" file, everything in the /system file has been erased, i suppose i only have to get a fresh system file ? and i found out that my phone is recognizing the pc normally now ! so where can i find this fresh system file ?
Yakia said:
hey man ! i'm pretty happy because the situation is clearly better now, my phone discharged today and i putted it in charge the charging logo was here, i tried to power it on but it always boots on twrp recovery what should i do
Click to expand...
Click to collapse
Thats much better now
In twrp you can goto to power option and select download mode or bootloader
Thats all
With download mode you can simply flash your phone using OST tool
Hit thanks button if you find this helpful
Happy flashing
sltushar said:
Thats much better now
In twrp you can goto to power option and select download mode or bootloader
Thats all
With download mode you can simply flash your phone using OST tool
Hit thanks button if you find this helpful
Happy flashing
Click to expand...
Click to collapse
yes but what i'm supposed to flash ?
sltushar said:
Thats much better now
In twrp you can goto to power option and select download mode or bootloader
Thats all
With download mode you can simply flash your phone using OST tool
Hit thanks button if you find this helpful
Happy flashing
Click to expand...
Click to collapse
i just have to get this system file and to replace it
Yakia said:
yes but what i'm supposed to flash ?
Click to expand...
Click to collapse
The firmware, you can not put system files through twrp, you must have to flash the firmware
sltushar said:
The firmware, you can not put system files through twrp, you must have to flash the firmware
Click to expand...
Click to collapse
it will not overwrite the files that are already on my phone ?
Yakia said:
it will not overwrite the files that are already on my phone ?
Click to expand...
Click to collapse
Yes it will but your user data wont be deleted
And you can apply update through OTA with stock recovery menu
And also you will get the oreo update if you do so
Hit thanks button if you find this helpful
Happy flashing
sltushar said:
Yes it will but your user data wont be deleted
And you can apply update through OTA with stock recovery menu
And also you will get the oreo update if you do so
Hit thanks button if you find this helpful
Happy flashing
Click to expand...
Click to collapse
hi, i can't flash or update anything because i rooted my phone and making update will brick my phone : "10.After your phone rooted, you can reboot your phone. DO NOT INSTALL ANY OTA UPDATES OR YOUR PHONE WILL GET STUCK AT STOCK RECOVERY (However I've never tested Magisk on Nokia 6), but I’ll recommend you to disable automatic update in settings."
Yakia said:
hi, i can't flash or update anything because i rooted my phone and making update will brick my phone : "10.After your phone rooted, you can reboot your phone. DO NOT INSTALL ANY OTA UPDATES OR YOUR PHONE WILL GET STUCK AT STOCK RECOVERY (However I've never tested Magisk on Nokia 6), but I’ll recommend you to disable automatic update in settings."
Click to expand...
Click to collapse
Man are you listening or what...
M again telling you follow all steps care fully
When OST tool will ask you to connect your phone then goto recovery mode in your phone and select power option and then select bootloader
When it will be booted to download mode connect your phone to pc and then select next button on OST tool into your pc
Flashing your phone will unroot your phone
Thats all it will start flashing and then you can install all the OTA with stock recovery
If you stuck on any step follow the steps for OST tool that i provided you earlier in this thread
And for OTA you can goto this thread https://forum.xda-developers.com/nokia-6/how-to/guide-oreo-follow-steps-t3723776
sltushar said:
Man are you listening or what...
M again telling you follow all steps care fully
When OST tool will ask you to connect your phone then goto recovery mode in your phone and select power option and then select bootloader
When it will be booted to download mode connect your phone to pc and then select next button on OST tool into your pc
Flashing your phone will unroot your phone
Thats all it will start flashing and then you can install all the OTA with stock recovery
If you stuck on any step follow the steps for OST tool that i provided you earlier in this thread
And for OTA you can goto this thread https://forum.xda-developers.com/nokia-6/how-to/guide-oreo-follow-steps-t3723776
Click to expand...
Click to collapse
i don't want to lose my root privileges thats the point
Hello,I've flashed LineageOS before 1 week and it was all fine,but I had signal problems so i downloaded stock rom from official website and used huawei extraction tool to flash it with TWRP,after flashing i tried to reboot but the phone won't turn on..My device is P8 lite ALE-21.
Saleone said:
Hello,I've flashed LineageOS before 1 week and it was all fine,but I had signal problems so i downloaded stock rom from official website and used huawei extraction tool to flash it with TWRP,after flashing i tried to reboot but the phone won't turn on..My device is P8 lite ALE-21.
Click to expand...
Click to collapse
Boot to bootloader by press volume down and power at same time and plug phone to PC fast! Then lets see what you have.
Saleone said:
Hello, I've flashed LineageOS before 1 week and it was all fine, but I had signal problems so I downloaded the stock ROM from the official website and used Huawei extraction tool to flash it with TWRP, after flashing I tried to reboot but the phone won't turn on. My device is P8 lite ALE-21.
Click to expand...
Click to collapse
Had the same problem going back to Stock from LineageOS... Did you clear the System too? Back then, in order to install LineageOS, you'd have to clear the System too... And then flash the LineageOS...
So for reverting back, do the same... Wipe the System and then log in to fastboot mode and then flash the 4 Images extracted from the Huawei Update Extractor... If by any means, you could not go into fastboot mode, then connect your phone to your laptop by holding the volume down key, this should boot into the fastboot mode...
Good luck..
amageek said:
Had the same problem going back to Stock from LineageOS... Did you clear the System too? Back then, in order to install LineageOS, you'd have to clear the System too... And then flash the LineageOS...
So for reverting back, do the same... Wipe the System and then log in to fastboot mode and then flash the 4 Images extracted from the Huawei Update Extractor... If by any means, you could not go into fastboot mode, then connect your phone to your laptop by holding the volume down key, this should boot into the fastboot mode...
Good luck..
Click to expand...
Click to collapse
Thanks for trying to help,but I can't turn my phone on,just the led blinks red-green-red and when i connected it to PC in Device Manager the phone was detected but with some weird chinese letters..
u fix?
Saleone said:
Hello,I've flashed LineageOS before 1 week and it was all fine,but I had signal problems so i downloaded stock rom from official website and used huawei extraction tool to flash it with TWRP,after flashing i tried to reboot but the phone won't turn on..My device is P8 lite ALE-21.
Click to expand...
Click to collapse
Man u fix this problem??? because i have same problem
Saleone said:
Thanks for trying to help,but I can't turn my phone on,just the led blinks red-green-red and when i connected it to PC in Device Manager the phone was detected but with some weird chinese letters..
Click to expand...
Click to collapse
Nicolas2000 said:
Man u fix this problem??? because i have same problem
Click to expand...
Click to collapse
You need to boot in fastboot mode! Don't you see? If fast boot works, you have hope, if not, then you are fu*kup!
Saleone said:
Hello,I've flashed LineageOS before 1 week and it was all fine,but I had signal problems so i downloaded stock rom from official website and used huawei extraction tool to flash it with TWRP,after flashing i tried to reboot but the phone won't turn on..My device is P8 lite ALE-21.
Click to expand...
Click to collapse
RootingPro-18 said:
You need to boot in fastboot mode! Don't you see? If fast boot works, you have hope, if not, then you are fu*kup!
Click to expand...
Click to collapse
only red and verdant ... and in device manager something with Chinese letters appears ..and HUAWEI USB COM 1.0 ...
Nicolas2000 said:
only red and verdant ... and in device manager something with Chinese letters appears ..and HUAWEI USB COM 1.0 ...
Click to expand...
Click to collapse
Boot to bootloader by press volume down and power at same time and plug phone to PC fast!