Hi,
I'm having trouble getting TWRP on my Galaxy J3 2016. When flashing the latest TWRP onto the device through the latest version of Odin, Odin claims the process is successful and the phone seems to turn itself off, and then I remove the battery otherwise the phone won't turn back on. When putting the battery back in and rebooting to the recovery, it says Recovery is not seandroid enforcing and is stuck at this screen.
The phone is running Samsung's software which is nougat 7.1.1.
Related
I decided to root my Samsung Galaxy S5 today which was totally successful. I was able to update SuperSu and install Busybox. So, here is when everything went downhill. I wanted to install a custom recovery (used the unofficial twrp) and flashed it through Odin. It confirmed "PASS!" at the end of it and was excited to start finally installing roms on this bad boy. But after it re-booted it went to recovery & something "over-ridden" it in red text. Can't remember word for word but the screen said "[email protected] something software not allowed" so I tried pulling the battery, and that didn't work so I just used the un-brick guide to flash it back to stock. Once again, Odin confirmed "PASS!" after I downloaded the correct firmware for my phone. But now my phone doesn't boot correctly, it's stuck on the "Samsung Galaxy S5," "powered by android" screen. There is a unlocked lock and has the word "Custom" under it. The phone vibrates when turned on, recovery and download can be accessed, it even makes the [email protected] boot sound but dosen't boot to the setup. I'm very confused and stuck with what to do. Sorry for the essay but I wanted to put everything I did so it can help you guys out on my situation too.
Flash a stock ROM from sammobile .com with ODIN, instructions under the ROM download
Hopefully Somebody can help.
My Galaxy A5 had Ressurection remix custom rom on it for a little over a year. Yesterday I decided I wanted to go back to stock firmware, I flashed the 4.4.4 stock firmware through odin and all was fine.
Then when I tried to OTA update to 6.0.1 it wasn't available so I figured I could go the odin route. So i downloaded the 6.0.1 firmware for my version, and went to flash it with odin. The flash failed, i thought no big deal. At this point the phone was still in download mode. About 30 seconds after the flash failed, i unplugged the USB cable. I figured 30 seconds would be enough time for odin to finish anything it needed to do.
Once I unplugged it download mode was still on (Even though I had auto reboot ticked in odin). I tried to restart the phone but it wouldn't boot into the OS.
Currently it wont boot into download mode, the OS or recovery.
I've tried loads of button combinations and tried connecting it to odin again, but neither odin, or my pc will recognise the phone.
Anybody have any suggestions?
If i hold down the power button for 10 seconds the phone vibrates, that's the only bit of life in it.
For some context, I had successfully rooted my S8 with Magisk using TWRP just a few months ago before unrooting. I've decided I want to root my phone again and I went through the same procedure as before but I can't get into recovery mode now for some reason. The phone just auto reboots into the "Samsung Galaxy S8+" splash screen and gets stuck there until I decide to boot into download mode no matter how early I push the buttons to get into recovery mode. I've already flashed my firmware and tried again like 15 times already, so I have nothing to lose. Can someone help me out? Thanks!
So, a while back i tried rooting my j5 2015 (sm-j500fn), unsuccesfully. The error I had was that when entering the recovery i installed from Odin would not boot up. I left it at that and opened my phone normaly ,and used it that way. Though today when doing differemt stuff i had very low space and decided to do a factory reset from the settings themself. When i tapped okay the phone powered off, then on and to the teamwin recovery project, which cant load and just kind of bootloops. Can i fix this? Help >_<
Install an older version of samsung smartswitch on your pc and use its erase and update option.(latest version doesnt have it)
You probably installed the wrong recovery.
Tried flashing combi firmware to install safestrap recovery from here https://forum.xda-developers.com/t/...s-extreme-syndicate-safestrap-method.4060701/ and after flashing the device went off, cannot boot into odin mode or recovery. Please help