Hi, I've had a S4 LTE for over a year, tried quite a few different roms on it and eventually settled for Diamond John's RR 5.8.5 version. This was working more or less okay until a few weeks ago when the phone crashed during some activity with that blue screen thing.
After that I could not start the rom properly again, it always either boot loops or displays the blue screen. I then tried reinstalling the rom, other roms, bootloader and eventually the stock rom but it still behaves the same - crashes, bootlops and/or blue screen.
I think I did follow the recommended procedures, ie wiping everything, starting from scratch and using appropriate files but can't be 100% sure since I'm not an Android wiz. Hence my question: do you think there is something else I can try to recover this phone or does this look like hardware failure?
Thanks in advance
Related
Hi guys
I have re-downloaded the ROM, and also tried flashing with a completely different one, one Sense based the other generic android 2.1 based... That one freezes on the 4 colour pyrotechnics nexus splash screen.
Any ideas how to get around this?
Thanks
Mark
UPDATE:
It seems that I CAN restore to a nanbackup and get back to Sense, but without my settings intact. As soon as I try to flash to ANY rom again, it will still freeze at quietly brilliant or the nexus 4 colour splash.
Ive tired an SD repair, wiped everything I could wipe using the bootloader menu... so why all of a sudden this, I have often flashed with no problem in the past.
Tx
Mark.
yeah dat happens to mine now iv had to revert back to the stock android 1.5, im still rotted tho... its disappointing
Same here, tried the Villain Mod, freezes on this screen.
Attempting to restore now...
So I recently purchased my AT&T Galaxy S4 with MDL baseband. I rooted and installed TWRP via motochopper. I then loaded Kangabean 4.2.2 and everything was great. Got notification for OTA update to 4.3 and decided might as well load Kangabean 4.3 as opposed to dealing with the OTA notification. I did so (after formatting internal SD and performing factory reset) and now my phone won't boot beyond the Galaxy S4 splash screen. I restored a nandroid backup of the original software and was able to boot the phone once, but couldn't load the custom rom again, nor can i load into the stock rom anymore either. Does it sound like my phone may have a hardware failure? Would attempting to restore through odin be the next logical step? I'm by no means an expert with these sort of things but my S2 has never given me any sort of grief when flashing various roms in the past. Any advice would be greatly appreciated. Thanks in advance!
Try a different kernel, also, pull the battery for 5 min, it will boot.
TheAxman said:
Try a different kernel, also, pull the battery for 5 min, it will boot.
Click to expand...
Click to collapse
Yeah I left the phone off with the battery removed all night - didn't want to boot this morning. I'm also noticing an oddity with TWRP - it's for some reason asking for a password on startup even though I've never set one. It also gives an error when attempting to wipe the phone or re-flash
id try odin
Don't Odin yet. If you can get into recovery see if you can flash a new recovery onto the phone. Try this http://forum.xda-developers.com/showthread.php?p=41746967
jd1639 said:
Don't Odin yet. If you can get into recovery see if you can flash a new recovery onto the phone. Try this http://forum.xda-developers.com/showthread.php?p=41746967
Click to expand...
Click to collapse
It will not let you past the password, been there, it will only do simulated flashes.
Odin is his only option.
So I managed to flash back to stock with odin. I was then able to re-root and re-install recovery. Something is still wrong here though. I was able to load kangabean 4.3, but when i installed the SIM card (kept it out to prevent OTA updates) the phone would no longer boot. I then re-flashed with odin, re-rooted, installed sim, THEN loaded the rom and it worked.... For a while. I had the phone plugged in to my laptop as i had recently transferred some ringtones to the internal SD. I powered down the phone. It seemed to shut the OS down but it then displayed a battery symbol with a rotating circular animation, as if it was trying to show that it was charging the battery. The phone froze in this state.
Another thing that I've noticed is that when this phone freezes, it gets warm. It also tends not to respond well until i've let it cool down. I'm now having difficulty booting the phone after re-flashing with odin. It loads to the white screen with AT&T logo and hangs (and gets warm). I plan to leave the phone alone with battery removed for the day and attempt to reboot or re-flash with odin later.
I find it odd that the rom that i flashed would stop working if i've flashed the rom with the sim removed from the phone, then introduced the sim to the phone after the flash is complete. Is this normal? I'm also unsure if my phone has faulty hardware, or maybe there's some sort of software glitch that's causing it to hang and overhead (like an infinite loop caused by faulty software).
I think if / when I can get it working with the stock rom again, I'll root it and run it for a while and see what it does. I never intended to run this phone with the stock rom as I prefer vanilla android.
I'm wondering if there's something wrong with the kernel. Perhaps I should re-download the ROM and re-install it. I'm not sure but I think the kernel is responsible for charging issues. Perhaps a bad kernel WOULD explain why the phone sometimes freezes at the "battery charging" logo? I'm somewhat at a loss as to what to do. I could try exchanging it through AT&T. If so, I hope they nave another one in their stock that has the MDL baseband as I know I'd be screwed with the current one...
Squidbert said:
So I managed to flash back to stock with odin. I was then able to re-root and re-install recovery. Something is still wrong here though. I was able to load kangabean 4.3, but when i installed the SIM card (kept it out to prevent OTA updates) the phone would no longer boot. I then re-flashed with odin, re-rooted, installed sim, THEN loaded the rom and it worked.... For a while. I had the phone plugged in to my laptop as i had recently transferred some ringtones to the internal SD. I powered down the phone. It seemed to shut the OS down but it then displayed a battery symbol with a rotating circular animation, as if it was trying to show that it was charging the battery. The phone froze in this state.
Another thing that I've noticed is that when this phone freezes, it gets warm. It also tends not to respond well until i've let it cool down. I'm now having difficulty booting the phone after re-flashing with odin. It loads to the white screen with AT&T logo and hangs (and gets warm). I plan to leave the phone alone with battery removed for the day and attempt to reboot or re-flash with odin later.
I find it odd that the rom that i flashed would stop working if i've flashed the rom with the sim removed from the phone, then introduced the sim to the phone after the flash is complete. Is this normal? I'm also unsure if my phone has faulty hardware, or maybe there's some sort of software glitch that's causing it to hang and overhead (like an infinite loop caused by faulty software).
I think if / when I can get it working with the stock rom again, I'll root it and run it for a while and see what it does. I never intended to run this phone with the stock rom as I prefer vanilla android.
I'm wondering if there's something wrong with the kernel. Perhaps I should re-download the ROM and re-install it. I'm not sure but I think the kernel is responsible for charging issues. Perhaps a bad kernel WOULD explain why the phone sometimes freezes at the "battery charging" logo? I'm somewhat at a loss as to what to do. I could try exchanging it through AT&T. If so, I hope they nave another one in their stock that has the MDL baseband as I know I'd be screwed with the current one...
Click to expand...
Click to collapse
TheAxman said:
Try a different kernel, also, pull the battery for 5 min, it will boot.
Click to expand...
Click to collapse
//
Squidbert said:
.
Another thing that I've noticed is that when this phone freezes, it gets warm. It also tends not to respond well until i've let it cool down. I'm now having difficulty booting the phone after re-flashing with odin. It loads to the white screen with AT&T logo and hangs (and gets warm). I plan to leave the phone alone with battery removed for the day and attempt to reboot or re-flash with odin later.
Click to expand...
Click to collapse
If you're on the stock AT&T rom and you're getting stuck on the AT&T boot logo try the following:
Power off your phone and hold down Volume Up, Center Home, and Power buttons together.
Once you see the Galaxy S4 splash - Keep holding down Volume Up and Center Home buttons but let go of Power button.
Choose the wipe datafactory reset. This will wipe your phone completely but it should boot after.
Hope that helps.
Well I've been toying around with this thing and much to my surprise, I have CM10 running stable w/o any issues booting! I think I would prefer to run Kangabean 2.05 (android 4.3) though. Assuming that the kernel could be a likely cause of the OS not booting, could someone recommend a suitable kernel for that rom? It appears to come packaged with the "KT" kernel...
Another thought i had was perhaps TWRP wasn't adding the loki feature to the roms that i was trying. I upgraded from 2.5x to 2.6. Hasn't seemed to have made a noticeable difference though.
Would the fact that CM10 runs absolutely flawlessly with no issues booting at all possibly help narrow down why the other roms that I'm flashing only load up the first time but fail at the "Galaxy S4" splash screen on subsequent reboots? Admittedly I'm a relative noob to roms and such but up until now i've been able to muddle my way through things and eventually figure them out. I'm not having the greatest luck with this one!
Squidbert said:
Well I've been toying around with this thing and much to my surprise, I have CM10 running stable w/o any issues booting! I think I would prefer to run Kangabean 2.05 (android 4.3) though. Assuming that the kernel could be a likely cause of the OS not booting, could someone recommend a suitable kernel for that rom? It appears to come packaged with the "KT" kernel...
Another thought i had was perhaps TWRP wasn't adding the loki feature to the roms that i was trying. I upgraded from 2.5x to 2.6. Hasn't seemed to have made a noticeable difference though.
Would the fact that CM10 runs absolutely flawlessly with no issues booting at all possibly help narrow down why the other roms that I'm flashing only load up the first time but fail at the "Galaxy S4" splash screen on subsequent reboots? Admittedly I'm a relative noob to roms and such but up until now i've been able to muddle my way through things and eventually figure them out. I'm not having the greatest luck with this one!
Click to expand...
Click to collapse
TWRP does not now and has never added LOKI to any ROM or Kernel. Only OUDHS CWM auto-LOKIs. You have to use A pre-LOKIed Kernel or flash the LOKI DokI script to LOKI anything with TWRP. You can do a search to find the LOKI DOKI script and how to use it.
fatah
hi my phone is galaxy s4 at&t i337 rooted but not installed recovery the phone was working good suddenly i deleted at&t software updater after that the phone rebooted it's self and then stuck in at&t boot logo won't bootup please help
TheAxman said:
Try a different kernel, also, pull the battery for 5 min, it will boot.
Click to expand...
Click to collapse
galaxy s4 i337 stuck on at&t bootAnimation
i tried everything but still same please help my phone is not booting up
fatahmusse said:
i tried everything but still same please help my phone is not booting up
Click to expand...
Click to collapse
Flash the stock firmware.
samsung galaxy s4 i337
thank you i flashed to mf3 everything is ok
fatahmusse said:
thank you i flashed to mf3 everything is ok
Click to expand...
Click to collapse
Glad to hear
So I've been having this strange issue for a year now, where I want to upgrade my SM-T530 (Tab4 10.1 wifi) to the stock Lolipop (5.0.whatever) ROM in order to get the damn kernel updated so I can access all these wonderful custom ROMs (Stuck on CM 12 atm...).
But whenever I flash a stock ROM for my model, it seems to freeze the screen after the boatloader. As in, everything seems to be working, sound and touchscreen, it just doesn't update/refresh the screen. Basically, the same behaviour as described in this post.
So here's the steps I took, in the hope that anyone can point me in the right direction:
Boot tablet in recovery (TWRP 3.0.1, in this case) and wipe Dalvik, /data, /cache, /system, basically everything)
Reboot tablet into bootloader/download mode
Using Odin 3.11.1, flash T530XXU1BOL2_T530PHN1BOE1_HOME.tar.md5 (Found here, which should be the correct ROM for my model (Bought in the Netherlands, but I have no idea where you folks are pulling this T530XX stuff from, it's nowhere to be found on the back))
Reboot tablet
After the 4th step, the tablet will be unresponsive for ~10 minutes (I think it's doing the whole "upgrading apps" thing that follows a new installation). After that, when I hit a certain area of the screen, I can hear the regular Android touchresponse, raising the volume also give the normal beeps and pushing the power button plays the "turning off screen" sound, but the screen stays active, showing the Samsung Galaxy Tab4 boot logo.
Soooo... Anyone care to take a guess what I'm doing wrong?
Personally, I think it might have to do with flashing the incorrect stock ROM, but for the life of me, I can't find out which T530-code I have. I've been flashing different ROMs, but no luck so far...
As for troubleshooting I've already tried:
The above procedure, afterwards flashed TWRP via Odin and flashed a custom ROM via TWRP. Same effect.
Variations of the above procedure, where I keep wiping the tablet after each step
Different custom ROMs
Ugh, nevermind.
Turns out I have an UK tablet (BTU-T530XXU1BOG2). After flashing a dozen or so ROMs, this one did the trick.
Oh well, problem solved :good:
Hey everyone,
I have been looking around online for several days now, but haven't been able to find a description of the problem I have with my n910f nor a solution.
When I got the phone it was stuck in bootloops and so I though it was soft bricked.
After I installed the custom rom and the latest version of TWRP via Odin, I thought that the problem was fixed, because the phone booted and I was able to start the configuration of Android (where it asks you for language, time zone etc.)
However, the phone turned itself off during this process. So I wiped everything and tried again, the same thing happened.
I then flashed it with Lineage, but it would turn itself off even before the logo appeared.
Then I flashed it with Ressurrection ROM, but again, the phone turns itself off during booting.
I can access download and recovery mode without any problems, I can flash roms and Odin works like a charm. I also used 2 different batteries.
Does anyone has an idea what I could try? Could it be the version of TWRP I am using (3.0.2.0)? Or is it a hardware issue?
Thank you!!
Hi, I have this exact same issue with my N910T and so far haven't found a solution to this. I really love my Note 4 so I'd like to know if this issue can be solved or not. I event went to a supposed repair shop and they couldn't figure out the problem, guess they weren't that good.
Sorry to hear this.
I have found issues that seemed similar, but not quite the same, and people hinted that it could be a worn out motherboard that is causing this top happen. But before I open up the phone (at the potential risk of breaking at least the screen) I would try everything else.
Or is there a way to test whether the motherboard is defective?
Its the plague of overheated, worn out emmc memories, sadly. Once it happen,the only way is a new/used motherboard,prefferably C model.
eMMC failure, snapdragon models are susceptible to this.
Tüddels said:
Hey everyone,
I have been looking around online for several days now, but haven't been able to find a description of the problem I have with my n910f nor a solution.
When I got the phone it was stuck in bootloops and so I though it was soft bricked.
After I installed the custom rom and the latest version of TWRP via Odin, I thought that the problem was fixed, because the phone booted and I was able to start the configuration of Android (where it asks you for language, time zone etc.)
However, the phone turned itself off during this process. So I wiped everything and tried again, the same thing happened.
I then flashed it with Lineage, but it would turn itself off even before the logo appeared.
Then I flashed it with Ressurrection ROM, but again, the phone turns itself off during booting.
I can access download and recovery mode without any problems, I can flash roms and Odin works like a charm. I also used 2 different batteries.
Does anyone has an idea what I could try? Could it be the version of TWRP I am using (3.0.2.0)? Or is it a hardware issue?
Thank you!!
Click to expand...
Click to collapse
I suggest flashing stock rom with Odin after wiping your whole device in TWRP. I've had the same thing about 2 months ago.
Hey,
thank you for your responses. Yes, I read a lot about it being a motherboard problem.
I got it to work now thanks to this post: https://forum.xda-developers.com/note-4/general/downgrade-official-mm-to-kitkat-t3383885
First nothing happened, but after I flashed Modem and the original Bootloader again (after installing the rom) the phone turned on and I was able to use it for a while (20mins maybe). Then suddenly it turned itself off and stayed on the "Samsung Galaxy" screen for a long time.
Apparently a lot of people are using Wakelock and it seems to be working for some of them, but that seems to defy the point somehow.
KirbyFan64 said:
I suggest flashing stock rom with Odin after wiping your whole device in TWRP. I've had the same thing about 2 months ago.
Click to expand...
Click to collapse
Which Stock Rom did you use exactly? Is your phone working fine?
Hi! I have an issue with a 64gb Nexus 6p (running stock android 8.1, latest patch, unlocked bootloader)
The phone consistiently runs extremely slow (taking 5 minutes to boot) and animations heavily lag, to the point where they are displayed over the top of the phone (I can unlock my phone using my passcode while the phone is still displaying its boot animation, for example, as it has booted but the animation has not stopped)
Also, occasionally half of the screen flashes white, back to normal, white twice, then the entire screen goes black, at which point it then returns to normal. This stopped when I flashed Lineage, however I have since restored the phone to stock and it has come back.
So far, I have tried to:
reflash updates
install a seperate kernel
install different ROMs
but nothing has worked
Would anyone be able to help?
It seems to most likely be a board issue, but I am still holding out hope that it could be related to software.
Try flashing its original stock firmware no updates. Load nothing else. If it's still doing it, it's hardware.
Some rootkits can survive a factory reset but not a firmware reflash; pre Pies OS's are vulnerable.
blackhawk said:
Try flashing its original stock firmware no updates. Load nothing else. If it's still doing it, it's hardware.
Some rootkits can survive a factory reset but not a firmware reflash; pre Pies OS's are vulnerable.
Click to expand...
Click to collapse
I already have tried that, several times.
Guess it's a hardware issue, then - regardless, thank you very much for the help.
I wonder what specific part of the hardware could cause this issue. I remember reading a user on this forum at one point have a similar issue, however he unrooted his 6p and the issue went away.