Hey guys,
I am currently running latest d802f with dorimax 2.5 kernel. The following
problem also accured with stock kernel. As well on latest PA betas for about 2 weeks!
My light and proximity sensor seem does not to work anymore! First I thought its a PA beta problem, but it also accures on stock roms! I installed several auto brightness tools, because I thought somethings rom with the integrated auto brightness. But these additional apps don't work either!
Then I installed "sensor testing" apps and discoverd that NONE of them are showing any values for these sensor. either its "NO DATA" or "ERROR".
So, what to do? Gimme you thoughts plz, thx
Greetings
Up^^
Nobody else discovered the same issue?! An suggestions how to solve it?
Hi all,
I am having this problem in CM 12.1 , like the screen goes black while a call is initiated.The screen wont turn up untill the call is disconnected.
I tried different nightlies , even the latest one , but problem is still there. my baseband version is DDUHOA1
Does the modem have any role in this issue? Or is it a hardware issue ?
The proximity sensor works fine on stock rom or any other roms that i have installed so far, including cm based other roms like GearCM ,Euphoria. But on official cm 12.1 the issue pops up..
please help..
johnbabu said:
Hi all,
I am having this problem in CM 12.1 , like the screen goes black while a call is initiated.The screen wont turn up untill the call is disconnected.
I tried different nightlies , even the latest one , but problem is still there. my baseband version is DDUHOA1
Does the modem have any role in this issue? Or is it a hardware issue ?
The proximity sensor works fine on stock rom or any other roms that i have installed so far, including cm based other roms like GearCM ,Euphoria. But on official cm 12.1 the issue pops up..
please help..
Click to expand...
Click to collapse
this is due to proximity sensor happens to me all the time if u have xposed installed then download sensor disabler in xposed download section that will stop black screen on calls hope that helps u
ireaper4592 said:
this is due to proximity sensor happens to me all the time if u have xposed installed then download sensor disabler in xposed download section that will stop black screen on calls hope that helps u
Click to expand...
Click to collapse
Thanks for the reply ,
I installed Xposed . and then Sensor Disabler. Turned off Proximity sensor as you said
but no luck . The issue is still there.
So some newer devices have been shipped with different components from the older ones and while everything works fine on recent miui versions, most custom roms have issues. So I'm creating this thread to document all the issues caused by these new components and any solutions to them in one thread. Please reply if you have any other issues caused by the new hardware or any solutions to them.
Fingerprint
Description:
Option to add fingerprints doesn't appear even after setting pin, pattern or password on non miui based roms.
/data folder contains goodix folder with contents on miui.
Cause:
Some devices have a new fingerprint sensor manufactured by Goodix which is not yet supported by non miui based roms.
Solutions:
miui and any miui based roms such as xiaomi.eu should still work fine.
The newest build of Santosh's CM has a fingerprint patch available that will fix it.
Wait for CM to add support for the new hardware to its source code.
Battery
Description:
Battery is stuck at either -2% or 50%.
TWRP does not show battery percentage at all or constantly shows 50%.
Cause:
Possibly new battery controller hardware, by the looks of it the issue is related to the kernel, older CM kernel builds seem fine and so do newer miui builds however any rom using a new CM kernel build or based off it has the issue.
Solutions:
Fix was added to CM source code so the problem should be solved on all newer roms and kernels based on it now.
Flashing Radon 1.9 or above will fix it on any CM source based roms.
miui and other miui based roms such as xiaomi.eu should be fine.
Santosh's CM13 plust the camera fix works.
Mokee works fine.
Unofficial Ressurrection Remix works fine up until the 06/08 build.
This is the patch applied to Radon to fix the bug.
If you know of any other issues caused by newer hardware or solutions please tell me so that I can add it to this thread.[/QUOTE]
If possible, Can you also provide information about how to identify different components without changing roms?
Thank you.
dmemon said:
If possible, Can you also provide information about how to identify different components without changing roms?
Thank you.
Click to expand...
Click to collapse
Added for the fingerprint sensor, using TWRP is still probably the easiest way to check for the battery bug.
dmemon said:
If possible, Can you also provide information about how to identify different components without changing roms?
Thank you.
Click to expand...
Click to collapse
The sensor of fingerprints with aida64, it is possible to identify.
The battery only if flash the TWRP, for the present.
Santhosh's CM13 battery bug is gone if you flash his camera fix.
razr96 said:
Santhosh's CM13 battery bug is gone if you flash his camera fix.
Click to expand...
Click to collapse
Ok cool I'll add it to the post and test it out if I get a chance.
I hear of that Mokee is using Xiaomi device tree, I guess that is why it don't has the "-2% or 50%" issue...
NTRNSTR said:
Description:
Battery is stuck at either -2% or 50%.
TWRP does not show battery percentage at all or constantly shows 50%.
Cause:
Possibly new battery controller hardware, by the looks of it the issue is related to the kernel, older CM kernel builds seem fine and so do newer miui builds however any rom using a new CM kernel build or based off it has the issue.
Solutions:
Santosh's CM13 plust the camera fix should fix it.
Click to expand...
Click to collapse
The camera fix works only with Santosh's CM13, not with other CM/AOSP roms
the new kernel Radon V1.8 by Umang96 does not fix the battery problem
EkiFox said:
The camera fix works only with Santosh's CM13, not with other CM/AOSP roms
the new kernel Radon V1.8 by Umang96 does not fix the battery problem
Click to expand...
Click to collapse
I would expect it to work on all Santosh based roms, the camera fix must have modified something that flashing a new kernel overwrites, if we can figure out what the camera fix changes we might be able to get a fix for all roms.
---------- Post added at 02:11 PM ---------- Previous post was at 02:10 PM ----------
dna1982 said:
I hear of that Mokee is using Xiaomi device tree, I guess that is why it don't has the "-2% or 50%" issue...
Click to expand...
Click to collapse
Well that would explain it, but at least we have roms without the bugs, that should help figure out the problem.
any working custom kernels for -2% or 50% battery bug?
mega-samu said:
The sensor of fingerprints with aida64, it is possible to identify.
The battery only if flash the TWRP, for the present.
Click to expand...
Click to collapse
as far as i know AIDA64 is not a good way to see your fingerprint sensor it shows fpc102x for me but i have a goodix sensor, in fact i think the other ones with fpc sensors have a fpc 1035 not a 102x. i think a good was would be checking kernel log you should see the module name or checking data partition ( if you have root) or system/etc/firmware if you dont (i'm not sure about the second one but i can see some goodixfp data there)
just saying maybe it saves someone from lots and lots of confusion as i had when i bought my device
The new Radon kernel doesn't have the -2%/50% battery bug!
For the cm13 based roms : http://forum.xda-developers.com/showthread.php?p=68012485 and few posts under there is a test version for MIUI rom
Reno_kun said:
The new Radon kernel doesn't has the -2%/50% battery bug!
For the cm13 based rom : http://forum.xda-developers.com/showthread.php?p=68012485 and few posts under there is a test version for MIUI rom
Click to expand...
Click to collapse
:victory: Now we can use any Official-CM based rom. Definitely adding this to the top of the list.
Reno_kun said:
The new Radon kernel doesn't has the -2%/50% battery bug!
For the cm13 based rom : http://forum.xda-developers.com/showthread.php?p=68012485 and few posts under there is a test version for MIUI rom
Click to expand...
Click to collapse
Yep just flashed official RR with this kernel and no battery bug!
Yes, there is just the lack of the support ou goodix fp and it will be perfect !
KaciPL said:
any working custom kernels for -2% or 50% battery bug?
Click to expand...
Click to collapse
Now there are, just updated the post.
Radon V1.9 Kernel does not cause the battery bug .......
Radon V1.9 Kernel does not cause the battery bug on "MIUI 8 by Xiaomi.eu 6.7.28 | Beta".
I got a test version from @Umang96 and successfully got below 50% battery level.
Any custom kernel working with goodfix fp ??
Sent from my Redmi Note 3 using Tapatalk
I lose data connection on any cm custom rom. It goes away for 50-60sec then it gets back
And if i flash radio zip, then security options crash
LiRi2000 said:
Any custom kernel working with goodfix fp ??
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
I don't think so, still a work in progress getting it to work.
Please fix this problem on los/rr and other roms.
On G530H/FZ XCU models
@Has.007
@RioFebrian
I tryed cm camera fix and changing libs but doesnt work//lh3.googleusercontent.com/NggOrMno4UzBT2XbU1TQvcRIknkFseiC83OPop9UXU_2c6Ea7uKJXfs8VUk3AmXgLXtvPg=s85
no there is problem with that rom
Video recording doesn't work.
Neither stock nor installed camera apps...
I am using rr. There are no such problem.
fix this problem
ilhamisayev said:
Please fix this problem on los/rr and other roms.
On G530H/FZ XCU models
@Has.007
@RioFebrian
I tryed cm camera fix and changing libs but doesnt work//lh3.googleusercontent.com/NggOrMno4UzBT2XbU1TQvcRIknkFseiC83OPop9UXU_2c6Ea7uKJXfs8VUk3AmXgLXtvPg=s85
Click to expand...
Click to collapse
my friend just pull the battery out when the device is running and then put it back and turn the device on againe this problem happened to me and I searched for solution for very long time and finally I find the solution by Coincidence hhhhh
I'm having the same problem with RR since about 4 months. Can't use my rear camera. It is being detected but can't be used (tried any camera app). When I installed RR, it worked. I have this error since changing my display.
Try to Google it, there are some unofficial fixes out there but I'm not sure if they're really working. I would regard an official fix, but this will have to wait I think.
Such bug has already been fixed with each ROMs' respective latest builds.
Mine too I got a distorted camera but whenever I capture it captures normally, I haven't tried using other camera apps
I've got the same problem
im using footej camera now and it's ok
Could anybody recommend a best stable 64 bit BUG free( like cam not working or no volte) oreo rom
That i can use as a daily driver
Is the resurrection remix bug free and worth it?
Tried them all, and haven't found one yet that doesn't have some little bug or another. Just depends on what you can live with.
Is there any major downside for using a oreo rom now?
nigaindelhi said:
Is there any major downside for using a oreo rom now?
Click to expand...
Click to collapse
Well probably the problems going back to stock (though now you can make a backup of persist, which fixes volte). And also the tiny annoying bugs that come with custom roms (usually camera related, no slow-mo, etc.).
As for the bugs, most of them will be easier to solve when official oreo is released. Vache is waiting for oreo so that he can grab the camera blobs and stuff like that to make a stable treble oreo rom. Until then I'll just stick with stock.
You're better off sticking with stock or custom Nougat Roms. While you can "fix" VOLTE with persist and EFS backups, there are still issues with VOLTE malfunctioning occasionally requiring a restart of your phone to fix until it happens again.