Hey guys,
I am currently running latest d802f with dorimax 2.5 kernel. The following
problem also accured with stock kernel. As well on latest PA betas for about 2 weeks!
My light and proximity sensor seem does not to work anymore! First I thought its a PA beta problem, but it also accures on stock roms! I installed several auto brightness tools, because I thought somethings rom with the integrated auto brightness. But these additional apps don't work either!
Then I installed "sensor testing" apps and discoverd that NONE of them are showing any values for these sensor. either its "NO DATA" or "ERROR".
So, what to do? Gimme you thoughts plz, thx
Greetings
Up^^
Nobody else discovered the same issue?! An suggestions how to solve it?
Related
Hey guys, I'm having a problem with my N4 Auto-Focusing in videos. The sensor works in camera mode (Both tap to focus and automatic) but in video, it doesn't do anything at all. It sticks to the focused state it was in Camera mode and doesn't change. Flash works, everything works, but that. Problem persisted in many ROMS, PA Didn't let me auto focus at all, only touch and currently I'm on Carbon's latest beta ROM (Note: I used his stable release too, still didn't fix) paired with Morfic's Trinity TF110 kernel. Clocks @ 384/1512mhz & an additional -62.5mv UV (Stable) Non-UV still has this bug present. I don't know what's wrong, please help. Thanks
Detailed said:
Hey guys, I'm having a problem with my N4 Auto-Focusing in videos. The sensor works in camera mode (Both tap to focus and automatic) but in video, it doesn't do anything at all. It sticks to the focused state it was in Camera mode and doesn't change. Flash works, everything works, but that. Problem persisted in many ROMS, PA Didn't let me auto focus at all, only touch and currently I'm on Carbon's latest beta ROM (Note: I used his stable release too, still didn't fix) paired with Morfic's Trinity TF110 kernel. Clocks @ 384/1512mhz & an additional -62.5mv UV (Stable) Non-UV still has this bug present. I don't know what's wrong, please help. Thanks
Click to expand...
Click to collapse
You're using a 4.2.2 ROM with a 4.2.1 radio. The only fix is to upgrade the radio. (I think the new one's version ends in ".48".)
fenstre said:
You're using a 4.2.2 ROM with a 4.2.1 radio. The only fix is to upgrade the radio. (I think the new one's version ends in ".48".)
Click to expand...
Click to collapse
Oohhh thanks very much. I will go ahead and try that tomorrow Again, thanks for helping a newbie out xD
Detailed said:
Hey guys, I'm having a problem with my N4 Auto-Focusing in videos. The sensor works in camera mode (Both tap to focus and automatic) but in video, it doesn't do anything at all. It sticks to the focused state it was in Camera mode and doesn't change. Flash works, everything works, but that. Problem persisted in many ROMS, PA Didn't let me auto focus at all, only touch and currently I'm on Carbon's latest beta ROM (Note: I used his stable release too, still didn't fix) paired with Morfic's Trinity TF110 kernel. Clocks @ 384/1512mhz & an additional -62.5mv UV (Stable) Non-UV still has this bug present. I don't know what's wrong, please help. Thanks
Click to expand...
Click to collapse
Tap to focus isn;t available in Video Mode. However, is it possible to achieve that through some software tweak or an App.?
Hi, I have installed the latest nightly's and snapshot on my Note 3 N9005 and I am struggling to Dial anyone. The screen keeps going blank. It is a little better when using my Bluetooth Headset but is really totally useless. I usually have to take the battery out and reboot to gain control back.
I have tried
Full Wipe before each install. (cache & data)
CM11 - 27/07/14
CM11 - 26/07/14
CM11 - 25/07/14
CM11 - 08/07/14 M8
All have the same problem.
I am using CWM V6.0.4.7.
I would much rather use Cyanogenmod and am being forced to use one of the Stock ROMS OMEGA V21 which is ok but not what I am after. Is anyone else having this issue? Can I use another dialer?
Any help would be appreciated
:fingers-crossed:
doughty400 said:
Hi, I have installed the latest nightly's and snapshot on my Note 3 N9005 and I am struggling to Dial anyone. The screen keeps going blank. It is a little better when using my Bluetooth Headset but is really totally useless. I usually have to take the battery out and reboot to gain control back.
I have tried
Full Wipe before each install. (cache & data)
CM11 - 27/07/14
CM11 - 26/07/14
CM11 - 25/07/14
CM11 - 08/07/14 M8
All have the same problem.
I am using CWM V6.0.4.7.
I would much rather use Cyanogenmod and am being forced to use one of the Stock ROMS OMEGA V21 which is ok but not what I am after. Is anyone else having this issue? Can I use another dialer?
Any help would be appreciated
:fingers-crossed:
Click to expand...
Click to collapse
Update
I have changed the power button so it allows me to end the call when pressed. This corrects the problem and turning the "Prevent accidental wake-up" off in the Display and Lights section in the Setting Menu. This make CM11 usable thank goodness. :good:
I had the same problem with the latest CM11 M8 nightlies and snapshot version. Also almost useless GPS.
Got suggestions like changing the proximity sensor settings and pulling apart the phone to clean the sensor.
I installed C-ROM on the recommendation of a friend and bingo problems fixed.
Hello everybody,
I have a Galaxy S5 (G900F) running on CM13 6.0.1. My problem is that wheter the auto rotation, nor the auto screen brightness works at all. I already had the same problem on CM12.1, I don't know exactly when it happened, so I can't tell if the issue originated due to an update. However, all of the sensors except the thermal sensors are not working. In CPU-Z You can only see the thermal sensors that are fine, the other sensors are blank. I already did factory resets, installed an older backup (not exactly sure if it was still working there), I only didn't install a complete new (stock) rom. I just went from CM12.1 to CM13.
Thanks in advance and happy holidays to You guys
]
im having the same issue.mine started when i flashed marshmallow.so im gasing its a software issue.
Hi all,
I am having this problem in CM 12.1 , like the screen goes black while a call is initiated.The screen wont turn up untill the call is disconnected.
I tried different nightlies , even the latest one , but problem is still there. my baseband version is DDUHOA1
Does the modem have any role in this issue? Or is it a hardware issue ?
The proximity sensor works fine on stock rom or any other roms that i have installed so far, including cm based other roms like GearCM ,Euphoria. But on official cm 12.1 the issue pops up..
please help..
johnbabu said:
Hi all,
I am having this problem in CM 12.1 , like the screen goes black while a call is initiated.The screen wont turn up untill the call is disconnected.
I tried different nightlies , even the latest one , but problem is still there. my baseband version is DDUHOA1
Does the modem have any role in this issue? Or is it a hardware issue ?
The proximity sensor works fine on stock rom or any other roms that i have installed so far, including cm based other roms like GearCM ,Euphoria. But on official cm 12.1 the issue pops up..
please help..
Click to expand...
Click to collapse
this is due to proximity sensor happens to me all the time if u have xposed installed then download sensor disabler in xposed download section that will stop black screen on calls hope that helps u
ireaper4592 said:
this is due to proximity sensor happens to me all the time if u have xposed installed then download sensor disabler in xposed download section that will stop black screen on calls hope that helps u
Click to expand...
Click to collapse
Thanks for the reply ,
I installed Xposed . and then Sensor Disabler. Turned off Proximity sensor as you said
but no luck . The issue is still there.
Hi I've done a clean install on i9505 jfltexx and NFC's not working. I've put on latest weekly and latest micro opengapps, I can launch Android Pay but there's no tap. I've installed loads of different NFC tools and tried to read contactless cards, RFID alarm tags and another NFC phone but my phone just doesn't acknowledge them. I've tried several different batteries known to work with NFC, so I'm stumped. I saw a really brief message on a reddit post there's an NFC issue but that's about it, can anyone else help?
Also cannot adjust brightness at all, can move slider but no effect, another reddit post says there's a potential problem anyone else know what the issue is and how can I help resolve it if it's a rom issue?
Thanks
Clean install of WHAT?
LOS, sorry I thought that would have been obvious?
Flash the latest stock rom. If everything works under the stock rom, this indicates a issue with the custom ROM.
All the links to stock ROM took hours to download so haven't had chance yet but I have tried resurrection and mi ROMs last night and both issues show up too. I'm interested to know if anyone is using NFC on lineage with success on 9505?
Then try one of the custom TouchWiz ROMs. It's the closest you'll get without having to wait hours.