Hi everyone,
does anybody know if it's possible to edit the UI of canbus messages such as open doors, AC, parking radar etc?
If this could help i have a dasaita MAX6
Thanks
I have seen it done on youtube, would need to find the link... you need to program the CANBUS using VCDS or ODBEleven.
gliuvo said:
Hi everyone,
does anybody know if it's possible to edit the UI of canbus messages such as open doors, AC, parking radar etc?
If this could help i have a dasaita MAX6
Click to expand...
Click to collapse
If it is only the available messages and popups, then that's relatively simple.
If you want to receive other CAN bus messages from your cars system: Forget it.
surfer63 said:
If it is only the available messages and popups, then that's relatively simple.
If you want to receive other CAN bus messages from your cars system: Forget it.
Click to expand...
Click to collapse
I just want to put the image of my car instead of the default one in doors open and parking radar
gliuvo said:
I just want to put the image of my car instead of the default one in doors open and parking radar
Click to expand...
Click to collapse
Unzip the apk, find the image in it, replace it with yours (same size and name of course), rezip.
surfer63 said:
Unzip the apk, find the image in it, replace it with yours (same size and name of course), rezip.
Click to expand...
Click to collapse
Thanks! Can you tell me which apk do i have to modify?
gliuvo said:
Thanks! Can you tell me which apk do i have to modify?
Click to expand...
Click to collapse
I don't have a dasaita, but I'm almost sure the name has something with "canbus" in it.
Related
Hello
Since the HTC One is relatively new, and there's a bit of new stuff in the /system partition. I thought it'd be good to start a discussion thread on the topic Another reason is that I do not have the device yet, but will in a few months, but I am developing a ROM for it now
And @mods, please do not close this thread because there is another similar thread, because that is only for theming, this, on the other hand, is general.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Here is a list of APKs, that are new in the HTC One. Some of them have been figured out thank to you guys, some remain unknown to me
1)Liveretouch.apk *For Gallery*
2)MusicChannel.apk
3)Privinit.apk
4)ZeroEditing.apk *For Gallery*
5)Frisbee.apk. *For Transfer*
6)HTC_CIR.apk. *IR Remote*
7)HTCSpeakNGF.apk *HTC Car Voice Control*
8)HTCShoeboxEngine.apk *Part of BlinkFeed*
9)HTCShoeboxShare.apk *Part of BlinkFeed*
10)HTCspeak_HFM.apk
Click to expand...
Click to collapse
I would really appreciate if anyone could point out what these do/are for, and if anyone else has any questions similar to this, we can all help each other
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Another thing I would like to discuss, is, apart from the PrismXXX.apks, which APKs are part of HTC's Blinkfeed?
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Reserved.
If this post was helpful to you, or you're just feeling generous, please hit the thanks button
HTCSpeakNGF.apk is probably the Speak portion of the Car app. It speaks to you and you can use the following commands in addition to others:
Call ...
Play ...
Radio on
Listen to ...
Check new messages
Find ...
If it has its own engine for local voice recognition and text to speech, it makes sense that it's a big apk.
gtg465x said:
HTCSpeakNGF.apk is probably the Speak portion of the Car app. It speaks to you and you can use the following commands in addition to others:
Call ...
Play ...
Radio on
Listen to ...
Check new messages
Find ...
If it has its own engine for local voice recognition and text to speech, it makes sense that it's a big apk.
Click to expand...
Click to collapse
Thank you
Are you on the HTC One?
If yes, could you try removing this apk from system/app, and see if car doesn't have voice commands anymore? So it'll be confirmed that that is what this apk is for
If this post was helpful to you, or you're just feeling generous, please hit the thanks button
zeroediting appears to create the "movie" out of your gallery images.
showbox is, i believe, for the main htc sense homepage.. the one with all the feeds. I could be wrong...
xdracco said:
zeroediting appears to create the "movie" out of your gallery images.
showbox is, i believe, for the main htc sense homepage.. the one with all the feeds. I could be wrong...
Click to expand...
Click to collapse
Thank you
Appreciate it
I'd imagine that HTC_CIR is for the IR blaster, Consumer Infra Red was the term for IR emitters with a strong enough signal/correct protocols for controlling TVs back when most phones/PDAs used IR for serial comms.
i've deleted the "shoebox" apk's and the frisbee apk with no side effects. i think frisbee is related to that `move your data from previous phone to htc one` feature... it has the same icon in root file explorer as the transfer.apk. again, just a guess, i could be wrong.
ZeroEditing and LiveRetouch are all part of the Gallery and editing stuff. IIRC from looking into the smali a while back ZeroEditing does some of the stuff like preselecting the frames available for SequenceShot and so on, and LiveRetouch does all the actual editing stuff in gallery.
HTCSpeak is indeed HTCs offline voice command software which is launched through the car panel.
shuflie said:
I'd imagine that HTC_CIR is for the IR blaster, Consumer Infra Red was the term for IR emitters with a strong enough signal/correct protocols for controlling TVs back when most phones/PDAs used IR for serial comms.
Click to expand...
Click to collapse
Thanks mate
xdracco said:
i've deleted the "shoebox" apk's and the frisbee apk with no side effects. i think frisbee is related to that `move your data from previous phone to htc one` feature... it has the same icon in root file explorer as the transfer.apk. again, just a guess, i could be wrong.
Click to expand...
Click to collapse
I opened the frisbee APK, and you're right, its about transfer
Cheers
Dunc001 said:
ZeroEditing and LiveRetouch are all part of the Gallery and editing stuff. IIRC from looking into the smali a while back ZeroEditing does some of the stuff like preselecting the frames available for SequenceShot and so on, and LiveRetouch does all the actual editing stuff in gallery.
HTCSpeak is indeed HTCs offline voice command software which is launched through the car panel.
Click to expand...
Click to collapse
Thanks mate
So, if I don't use HTC's navigation, I can remove HTCSpeakNGF.apk safely?
Cheers
If this post was helpful to you, or you're just feeling generous, please hit the thanks button
Updated OP with information on the APKs you guys provided, thanks
If this post was helpful to you, or you're just feeling generous, please hit the thanks button
I can confirm, Shoebox is something to do with Blinkfeed
If this post was helpful to you, or you're just feeling generous, please hit the thanks button
theDroidfanatic said:
I can confirm, Shoebox is something to do with Blinkfeed
If this post was helpful to you, or you're just feeling generous, please hit the thanks button
Click to expand...
Click to collapse
I believe UDove is what used to be feedback.
nasvi said:
I believe UDove is what used to be feedback.
Click to expand...
Click to collapse
Feedback to HTC?
Thanks
If this post was helpful to you, or you're just feeling generous, please hit the thanks button
I've purchased this radio for my 2009 Peuget 308cc https://it.aliexpress.com/item/4000837909351.html?spm=a2g0o.productlist.0.0.10dc1a96zV3PXG&algo_pvid=96f29c04-a7a0-46a5-9df0-00c71f5d29ca&algo_expid=96f29c04-a7a0-46a5-9df0-00c71f5d29ca-1&btsid=0ab50f6215981180996013653ee1bc&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
It is sold by NaviFly but I have discovered that it is produced by MEKEDE and it has a T3 P1 ARMv7-A cpu 2Gb ram 32 Gb rom and a PSA-RZ-15 raise canbus on board
The unit works quite well but I have a problem with the application that manages the car information and messages, it has no text translated into my language (Italian) and some things don't work.
I tried to decompile the app and modify the res file where the texts are inside, I recompiled it, signed and aligned but nothing does not let me install it on the radio while on my phone it does (Huawei P30 pro)
How can I do to translate the texts of the messages and make it work correctly?
Is it possible to enter other messages for other canbus functions, for example if I press the parking sensor deactivation activation key, can I view it?
Also where can I find MCU and ROM updates?
Thanks everyone for the support.
This is the original APK for car info https://www.paesenews.it/alex/com.tw.car_01_961_0000_200615.apk
This is video of car info app
https://www.paesenews.it/alex/carinfo.mp4
alecoss said:
I've purchased this radio for my 2009 Peuget 308cc https://it.aliexpress.com/item/4000...earchweb0_0,searchweb201602_,searchweb201603_
It is sold by NaviFly but I have discovered that it is produced by MEKEDE and it has a T3 P1 ARMv7-A cpu 2Gb ram 32 Gb rom and a PSA-RZ-15 raise canbus on board
The unit works quite well but I have a problem with the application that manages the car information and messages, it has no text translated into my language (Italian) and some things don't work.
I tried to decompile the app and modify the res file where the texts are inside, I recompiled it, signed and aligned but nothing does not let me install it on the radio while on my phone it does (Huawei P30 pro)
How can I do to translate the texts of the messages and make it work correctly?
Is it possible to enter other messages for other canbus functions, for example if I press the parking sensor deactivation activation key, can I view it?
Also where can I find MCU and ROM updates?
Thanks everyone for the support.
This is the original APK for car info https://www.paesenews.it/alex/com.tw.car_01_961_0000_200615.apk
This is video of car info app
https://www.paesenews.it/alex/carinfo.mp4
Click to expand...
Click to collapse
That app is installed as system app...
If rooted you can replace the old apk by the new on the corresponding folder....or use the titanium.backup app to uninstall and install thr system.app
But you need tr be rooted first
Enviado desde mi SM-G975F mediante Tapatalk
ikerg said:
That app is installed as system app...
If rooted you can replace the old apk by the new on the corresponding folder....or use the titanium.backup app to uninstall and install thr system.app
But you need tr be rooted first
Enviado desde mi SM-G975F mediante Tapatalk
Click to expand...
Click to collapse
Thanks for reply, any ideas for rooting my device?
Thanks
alecoss said:
Thanks for reply, any ideas for rooting my device?
Thanks
Click to expand...
Click to collapse
I have the same problem...but in Portuguese, the radio is the same but i bought it from Makede Store it self, friend ALECOSS, can you tell me the name of the aplication, because i cant find it anywere.
is this the app that controls the onboard screen?
i have the same unit!
jamescook said:
is this the app that controls the onboard screen?
i have the same unit!
Click to expand...
Click to collapse
Hello
Yes it is. ( i don´t know is the name of it...)
alecoss said:
I've purchased this radio for my 2009 Peuget 308cc https://it.aliexpress.com/item/4000...earchweb0_0,searchweb201602_,searchweb201603_
It is sold by NaviFly but I have discovered that it is produced by MEKEDE and it has a T3 P1 ARMv7-A cpu 2Gb ram 32 Gb rom and a PSA-RZ-15 raise canbus on board
The unit works quite well but I have a problem with the application that manages the car information and messages, it has no text translated into my language (Italian) and some things don't work.
I tried to decompile the app and modify the res file where the texts are inside, I recompiled it, signed and aligned but nothing does not let me install it on the radio while on my phone it does (Huawei P30 pro)
How can I do to translate the texts of the messages and make it work correctly?
Is it possible to enter other messages for other canbus functions, for example if I press the parking sensor deactivation activation key, can I view it?
Also where can I find MCU and ROM updates?
Thanks everyone for the support.
This is the original APK for car info https://www.paesenews.it/alex/com.tw.car_01_961_0000_200615.apk
This is video of car info app
https://www.paesenews.it/alex/carinfo.mp4
Click to expand...
Click to collapse
Hi,
Do you solve your problem to control onboard screen ?
I have the same problem with psa-rz-15 canbus
Hello everyone
I have recently purchased this Imilab KW66 smartwatch, which almost seems to be a copy of the Haylou Solar LS-05. Both Imilab and Haylou are sub-brands of Xiaomi, and they have the same parts and look, act, feel the same. The only difference is that the Imilab connects with an app called GloryFit instead of Haylou Fit.
GloryFit allows us to change watchfaces, but only the ones available in the app. A custom mode is available but it's very limited. There is a screenshot of the Dials page in the attachments
I wanted to know if it was possible to modify the GloryFit app or use other watch faces with this watch. I have tried to install apps from other manufacturers that use this Realtek RTL8762C chip, but had no luck. I have also tried the Fundo way of making an appmanager folder but that did not work either.
Thank you!
I have the same issue.
Can anyone please help us with this.
Hi. I have also purchased this watch recently, I am interested in using a compatible app for additional watchfaces.
hi, can you please share the .bin file of the dials?
it usually located in /sdcard/Android/data/com.topstep.fitcloudpro/files/download
gstkmr said:
hi, can you please share the .bin file of the dials?
it usually located in /sdcard/Android/data/com.topstep.fitcloudpro/files/download
Click to expand...
Click to collapse
There is no such as file on my device.
I'm looking for solution too
blagoy.urumov said:
There is no such as file on my device.
I'm looking for solution too
Click to expand...
Click to collapse
This is what I have found instead
blagoy.urumov said:
This is what I have found instead
Click to expand...
Click to collapse
have u try FitCloud Pro or ORunning app?
gstkmr said:
have u try FitCloud Pro or ORunning app?
Click to expand...
Click to collapse
FitCloud Pro doesn't show the device & ORunning doesn't connect.
Thanks,
blagoy.urumov said:
FitCloud Pro doesn't show the device & ORunning doesn't connect.
Thanks,
Click to expand...
Click to collapse
In fact I somehow made ORunning works with the watch, I'm testing it and will let you know the outcome
Attached screenshot
blagoy.urumov said:
Attached screenshot
Click to expand...
Click to collapse
ORunning nothing works so far, looking forward to hear some feedback from other users
blagoy.urumov said:
ORunning nothing works so far, looking forward to hear some feedback from other users
Click to expand...
Click to collapse
I see, there's no watchface option, sorry I have no clue then
gstkmr said:
I see, there's no watchface option, sorry I have no clue then
Click to expand...
Click to collapse
Thanks for trying
blagoy.urumov said:
Thanks for trying
Click to expand...
Click to collapse
anyway I got this url when trying to download the dial from the fitcloudpro/orunning and using http sniffer
this is one of the watch face / dial .bin file:
http://fitcloud.hetangsmart.com/public/getfile/b95cbf47.bin
if anyone know how to retrieve the entire list of .bin files in that path maybe can share it here, thanks
gstkmr said:
hi, can you please share the .bin file of the dials?
it usually located in /sdcard/Android/data/com.topstep.fitcloudpro/files/download
Click to expand...
Click to collapse
Hello. I am sharing my bin files found in gloryfit app, in case they are useful.
Thank you everyone for your input regarding this watch.
spyrakos81 said:
Hello. I am sharing my bin files found in gloryfit app, in case they are useful.
Thank you everyone for your input regarding this watch.
Click to expand...
Click to collapse
thanks but i guess it's nit compatible with my watch
but anyway, attached are the watch face / dials from my DT96 and LF26
my method to change my dial are as follows:
1). bind your watch with FitCloudPro / Orunning
2). go to watch face / dial settings
3). download and sync any dial (just 1 dial only(
4). use your file explorer and copy one of the .bin attached, paste it onto /sdcard/Android/data/com.topstep.fitcloudpro/files/download or /sdcard/Android/data/com.oplayer.osportplus/files/download
5). rename the pasted .bin file exactly like the one exist in the folder
6). sync again the dial that you previously synced
gstkmr said:
thanks but i guess it's nit compatible with my watch
but anyway, attached are the watch face / dials from my DT96 and LF26
my method to change my dial are as follows:
1). bind your watch with FitCloudPro / Orunning
2). go to watch face / dial settings
3). download and sync any dial (just 1 dial only(
4). use your file explorer and copy one of the .bin attached, paste it onto /sdcard/Android/data/com.topstep.fitcloudpro/files/download or /sdcard/Android/data/com.oplayer.osportplus/files/download
5). rename the pasted .bin file exactly like the one exist in the folder
6). sync again the dial that you previously synced
Click to expand...
Click to collapse
Hello
Sorry, I had not noticed this topic had gotten any traction, hence the delay in reply. I am trying out the watchfaces now. Even if they don't work, thank you!
EDIT: Unfortunately, they fail the verification of the GloryFit app. I will try the other two apps and see if they work.
A very hot topic because there are many other watch faces that cannot be implemented. Perhaps because it is a fairly new watch because it was only updated two days ago and I received the Polish language. And one more thing, is it possible to enlarge the font in some way?
Hello everyone,
I have spent some time in the past few days looking for app's that would work with the IMILAB K66 (W10) watch and so far I have managed the watch to connect and work with GloryFit & Haylou Fit only.
What I was looking for is an app from watches that carry the same SoC RTL8762C and it looks like there are tons of watches caring the same chip, but so far I haven't managed to find app that will work or it's nice to use.
What can I say about Gloryfit & HaylouFit?
1. They are fine and they have the most basic futures that most fitness app have.
2. GloryFit is better than HaylouFit.
3. I would like to see GloryFit sync with Google Fit or Mi Fit.
4. I would like to see more options available like more watch faces, fonts & etc.
5. I would like to see improvements in accuracy of sleep time.
6. Weather doesn't display on the watch and it shows in the app.
I have sent email to IMILAB team with some of my suggestions and they have responded that they will take in consideration my suggestions.
My feedback about the device on scale from 1 to 5 is below:
Build quality - 4.
Display size and quality - 4.
Battery life - 4.
Firmware and software support - 2
Value for money - 5
Overall - 4.
Taking into consideration that the device is new and the app using to synchronise with my phone phone it is still under development I'm pretty much sure that in future we will see a lot more from the manufacturer.
Regards,
Tefit app also works
Anybody here know how to remove that floating icon? Damn i try everything but nothing can solve the problem
This is how to apply, extract the application to see
localos said:
This is how to apply, extract the application to see
Click to expand...
Click to collapse
Meaning?can you elaborate more?
It's called Touch Assist in my Car Settings menu
kira_cat said:
It's called Touch Assist in my Car Settings menu
Click to expand...
Click to collapse
Got it.thank you
Good morning ,
I allow myself to contact you because I bought this android car last summer for my renault megane 3
I have many qustions :
-Are there updates available? Because when I try to search for shift it finds nothing
- possible to deactivate the black screen when I backtrack? (I did not connect the camera because it is useless to me)
- Which gps application should be installed to have the gps on the default theme? Indeed I can't put google maps and waze works badly on the theme.
I found an example photo on the internet. I'm talking about the top right location for the gps
Thank you so much
Salut,
you should find something for you there : https://lnx.pausacafeone.it/wordpress/2022/12/09/topway-ts10-firmware/
Lione2 said:
Salut,
you should find something for you there : https://lnx.pausacafeone.it/wordpress/2022/12/09/topway-ts10-firmware/
Click to expand...
Click to collapse
Thanks, I'll take a look. And does anyone have an idea for my other problems? THANKS