Database Users

this usb device can perform faster if you connect it to a Hi-speed USB 2.0 port

My problem is little weird so i try to explain it as best as I can...
until today there was no problem to connect phone with USB but now when i connect the phone windows said "This device can peform faster this usb device can perform faster if you connect it to a Hi-speed USB 2.0 port. And another problem is when i turn phone into download mode start odin and connect the phone it said... usb device not recognized. I didnt flash any rom yet and i try different cables.
I am running on windows 7 ultimate 64-bit. I try two different PC and its look it the same problem.
But the weird part is that on third PC which has also win 7 ult 64-bit it works just fine.
So i try reinstall operation system but the same problem. The computer is max 3 years old so its has for sure usb 2.0
So i am little desperate because i am not sure if its problem with computers or with the phone.
Thank you for any advice!

I always had this problem with the i9100 actually, I blame crappy usb drivers.

Kies installed? Did you also try different usb ports? Chipset and USB Drivers of mainboard installed?

yes kies installed and also try back and front usb... but same result...
and usb drivers are installed manually by windows as far as i know... or?

Bladik said:
My problem is little weird so i try to explain it as best as I can...
until today there was no problem to connect phone with USB but now when i connect the phone windows said "This device can peform faster this usb device can perform faster if you connect it to a Hi-speed USB 2.0 port.
Standard Windows message for USB connections just means what it says .
And another problem is when i turn phone into download mode start odin and connect the phone it said... usb device not recognized.
Download mode how and whats on the phone in download window
Connection must be to a mainboard usb port .
If your PC has Kies make sure its not running make sure USB debugging is off on phone .
Power phone off restart start Kies connect phone does Kies see phone .
If yes turn Kies off remove cable connect phone in USB mass storage mode wait for windows to install drivers . Does PC see phone in Windows Explorer .
jje
Click to expand...
Click to collapse

yes windows explorer works
and kies also but still in usb 1.0 mode...
as I said I tried back usb and also front usb... same problem...
debugging is also off...
I try a little experiment... removed external grahics card and plug graphics on mainboard... and for a few seconds its works!
I try copy some video and speed was usb 2.0 but after few seconds its get error cannot copy bla bla and windows popup : this device can run faster and it change back to USB 1... weird...
and also i try again downloading mode but the same error... usb device not recognized...

Have you always used the same USB-port?
On some pc's, they only have one or two high speed ports and the other ones are "slow".
So yeah, try an other USB port on your pc
Sent from my GT-I9100 using XDA App

OP, I am confident it is a problem with your PC, and this XDA forum won't be able to help.
Try using another USB 2 device (like an MP3 player), see if you get the same message.
Use a different computers with the SGS2, see if you get the same message.

Bladik said:
yes windows explorer works
and kies also but still in usb 1.0 mode...
Thats your PC port USB 1
I try a little experiment... removed external grahics card and plug graphics on mainboard... and for a few seconds its works!
USB port not getting enough power .
Its PC not the phone explore sees phone and Kies sees phone = USB drivers ok
USB ports are not all usb 2 check your manual .
You can try factory reset on phone this will wipe all data .
jje
Click to expand...
Click to collapse

i tried all usb ports...
also i am using external hdd everyday i never had a problem
my mainboard is asus m3n78pro and there are usb 2.0 for sure...
how is possible to not get enogh power to usb when etc. like external disk just fork fine... ?

Bladik said:
i tried all usb ports...
also i am using external hdd everyday i never had a problem
my mainboard is asus m3n78pro and there are usb 2.0 for sure...
how is possible to not get enogh power to usb when etc. like external disk just fork fine... ?
Click to expand...
Click to collapse
Use a mainboard USB port they are USB 2 but it matters not a jot about 1 or 2 .
jje

[Q] Win 8 hates my intel drivers?

So I can't even get win 8 to install. It always asks for drivers for my sata device. I tried using the newest intel drivers from intel for the DX58SO mainboard(sorry can't post direct link) and extracted the drivers from the package to my usb drive. Now I've tried 8 different sata drivers in that package but have been unable to get it to accept the drivers. My sata mode is currently set to IDE
Am I just going to have to wait for the build to progress so that it'll accept the intel storage drivers?

try to update bios

It's been updated as well. Updating it actually shaved 15 or 20 seconds off the complete boot time to desktop but still not working for me. I have a feeling I'll have to wait a while before I can install this onto my spare drive.

from the product page of your board:
Six Serial ATA 3.0 Gb/s ports, including 2 eSATA port with RAID support supplied by a Marvell* controller
maybe you should try the marvell drivers, idk with sata ports are used by your hd / drives

Unable to find any marvel drivers. Only thing I can find on their site is for Ethernet. Ill just wait for a later build
Sent from my SAMSUNG-SGH-I997 using XDA App

marvell dot com -> support -> driver downloads (dropdown from support) -> 2nd entry ( 5/26/11 Windows Setup Installer (32- and 64-bit) for Yukon Controllers )
or direct link: www dot marvell dot com/support/downloads/driverDownload.do?driverId=175&action=1

Ack sorry. Used to associating Yukon with network drivers

Cannot get PC to recognize my Note 3

So i try to connect my phone to my PC and all it does is charge the phone. I was able to root the Note with CF's method but i can't get it to appear under devices lime my S4. I tried using the USB 3.0 cable and also a 2.0 cable with the same result, i also tried uninstalling the Samsung drivers and updating them to 1.5.27.0 but no success there either. Any ideas on how i can connect my note and have it seen as a camera?
thanks

You have to install samsung kies 3.
Sent from my SM-N900 using xda app-developers app

istana_pulau_es said:
You have to install samsung kies 3.
Sent from my SM-N900 using xda app-developers app
Click to expand...
Click to collapse
ok, thanks i will try
EDIT: It didnt work.
any other suggestions?

anybody??

It should works. If you are using Windows, please make sure you run the Kies3 application, not the previous Kies. If you have not uninstall previous Kies, there would be 2 applications of Samsung Kies.
Sent from my SM-N900 using xda app-developers app

What about on mac?

Did you try toggling the USB debug off/on to see if that makes any difference ?

Yachats said:
Did you try toggling the USB debug off/on to see if that makes any difference ?
Click to expand...
Click to collapse
I have the same problem as the OP. I am running Windows 8.1 X64 and I tried usb debugging and Kies 3. This is frustrating I am unable to connect to my PC.

Got mine reconnecting by removing drivers under driver properties and then reattached phone and windows installed proper drivers all on its own.
Sent from my SM-N900V using Tapatalk 4

Uninstall in a clean way (using, e.g., Driver Sweeper) any previous installed drivers and re-install this one: Samsung USB Driver for Mobile Phones 1.5.27.0 [Drivers Win 8/7/XP]. Should make it happen.

Use kies 2 not 3 or the drivers alone package and should work.

For me it didn't work with a standard micro USB cable. Just charges only.
I used the USB3 cable that is bundled with the device and it connects no problem. even when connected to a USB 2 port on my PC.
i bought a 3rd party USB3 cable from ebay and this works also.

The issue was from a intel Host USB driver, got Dell pro tech support to troubleshoot the issue for me and we updated the drivers and it worked
Sent from my SM-N900W8 using Tapatalk

I've used mine successfully on several Win 7 computers with USB2 & 3 cables. No additional drivers or Kies needed. The phone shows as a media device right away.

i Did every thing kies 3 and mobogenie etc but no result im using windows 7 64 bit ,
please help me out from this problum any one can do this?:crying:

Slendo said:
I've used mine successfully on several Win 7 computers with USB2 & 3 cables. No additional drivers or Kies needed. The phone shows as a media device right away.
Click to expand...
Click to collapse
I also had a problem on a Dell. I did system restore, then it worked again.

polish_pat said:
The issue was from a intel Host USB driver, got Dell pro tech support to troubleshoot the issue for me and we updated the drivers and it worked
I've also got a dell computer and I'm dealing with this exact problem. I've only got USB 3.0 ports on my computer. MTP works fine on other computers though. Could you share your updated drivers?
Click to expand...
Click to collapse

Mustafa0124 said:
polish_pat said:
The issue was from a intel Host USB driver, got Dell pro tech support to troubleshoot the issue for me and we updated the drivers and it worked
I've also got a dell computer and I'm dealing with this exact problem. I've only got USB 3.0 ports on my computer. MTP works fine on other computers though. Could you share your updated drivers?
Click to expand...
Click to collapse
I doubt my drivers would work as they are specific for my xps 13. But just wipe your chipset drivers, use a registry cleaner to clean it up and reinstall chipset drivers and usb host if you have them
Sent from my SM-N900W8 using Tapatalk
Click to expand...
Click to collapse

polish_pat said:
Mustafa0124 said:
I doubt my drivers would work as they are specific for my xps 13. But just wipe your chipset drivers, use a registry cleaner to clean it up and reinstall chipset drivers and usb host if you have them
Click to expand...
Click to collapse
Any suggestions on a registry cleaner? Never used one of those before
Click to expand...
Click to collapse

Mustafa0124 said:
polish_pat said:
Any suggestions on a registry cleaner? Never used one of those before
Click to expand...
Click to collapse
Ccleaner is the best. Make sure you hit yes when it prompts you to backup registry to make sure no boo boo happens
Sent from my SM-N900W8 using Tapatalk
Click to expand...
Click to collapse

Microsoft Windows Won't Recognize S7 Edge (Minimum System Requirements?)

Apologies if this is really, REALLY dumb, but I rarely use windows. I bought this little windows laptop for the sole purpose of rooting my Note 3/Note 4 using odin -- no problem! I am trying to root my S7 Edge and when I try to just connect the S7 Edge to the PC without Odin running I get the "Found New Hardware Wizard" . In all the videos I've seen the phone should just pop up like a removable drive. I installed the Samsung Drivers, and I can't think of what else it could be other than that this ancient computer doesn't play well with Samsung. Any Ideas?
Here are the specs that I could find:
Microsoft Windows XP
Version 2002
Service Pack 3
Pentium 4 CPU 2.0GHZ

the computer is fine there is an issue with the samsung drivers. They maybe out of date.
does the new hardware wizard finish or stops and gives you an error message.
Pop shows if the drivers are correctly installed on your computer.

Cosmic Blue said:
the computer is fine there is an issue with the samsung drivers. They maybe out of date.
Click to expand...
Click to collapse
I would think the opposite, that the drivers are too new to be compatible with XP.

Cosmic Blue said:
the computer is fine there is an issue with the samsung drivers. They maybe out of date.
does the new hardware wizard finish or stops and gives you an error message.
Pop shows if the drivers are correctly installed on your computer.
Click to expand...
Click to collapse
abcomputin said:
I would think the opposite, that the drivers are too new to be compatible with XP.
Click to expand...
Click to collapse
Thanks Guys!
It says that it is v1.5.14.0 which apparently I got on 12/22/2013. Do you think I should download a newer version?
Regarding the Hardware Wizard it asks me to connect to the internet, and when I choose not to that's it. Also, what do you mean by "Pop", Cosmic Blue?

Pashovski said:
Thanks Guys!
It says that it is v1.5.14.0 which apparently I got on 12/22/2013. Do you think I should download a newer version?
Regarding the Hardware Wizard it asks me to connect to the internet, and when I choose not to that's it. Also, what do you mean by "Pop", Cosmic Blue?
Click to expand...
Click to collapse
if you choose not connect with the internet it cannot download the proper samsung drivers for your phone.
yes you need a newer driver as the samsung 7edge has some newer features older samsung drivers cannot read.
pop means pop up but i was typing too fast.

Cosmic Blue said:
if you choose not connect with the internet it cannot download the proper samsung drivers for your phone.
yes you need a newer driver as the samsung 7edge has some newer features older samsung drivers cannot read.
pop means pop up but i was typing too fast.
Click to expand...
Click to collapse
Updated to the latest drivers, and now nothing happens. I hear a couple of sounds and that's it.

Pashovski said:
Updated to the latest drivers, and now nothing happens. I hear a couple of sounds and that's it.
Click to expand...
Click to collapse
that is encouraging it means that the computer is trying to connect to your phone.
did you enable mtp on your phone. check to see if a pop up is on your phone asking for permission to allow the computer access.

try with other computers and change cables.
try to update your driver with last smart switch (uninstall current driver before)
if pb persist, try to connect usb driver (flash disk) to your device with OTG cable, if flash device can't be reconized on your phone, your phone connector is the pb. I hope this is'nt the case

sbdz said:
try with other computers and change cables.
try to update your driver with last smart switch (uninstall current driver before)
if pb persist, try to connect usb driver (flash disk) to your device with OTG cable, if flash device can't be reconized on your phone, your phone connector is the pb. I hope this is'nt the case
Click to expand...
Click to collapse
Thanks for the reply! I have an OTG cable, and I am looking for a usb driver right now. I have got that to work in the past quite well.
What do you mean by "update my driver with last smart switch"?

Windows XP was fine until windows 10 arrived. Now most drivers and software demand newer libraries that doesn't exist or support in XP. So your phone being 15years newer could have problems with its parent(ie windows xp). Try upgrading to Vista(if hardware is too old) or Win7/10(if newer hardware). I suggest you to stay away from 8/8.1
ps. since its a pentium 4 processor, i'm not sure newer OS support it. Windows vista could run though(provided you have atleast 512mb of RAM)

Pashovski said:
Thanks for the reply! I have an OTG cable, and I am looking for a usb driver right now. I have got that to work in the past quite well.
What do you mean by "update my driver with last smart switch"?
Click to expand...
Click to collapse
see here

aj.bglr said:
Windows XP was fine until windows 10 arrived. Now most drivers and software demand newer libraries that doesn't exist or support in XP. So your phone being 15years newer could have problems with its parent(ie windows xp). Try upgrading to Vista(if hardware is too old) or Win7/10(if newer hardware). I suggest you to stay away from 8/8.1
ps. since its a pentium 4 processor, i'm not sure newer OS support it. Windows vista could run though(provided you have atleast 512mb of RAM)
Click to expand...
Click to collapse
Ahhh Thank you! Looks like I have my answer

Unable to unlock bootloader

I've read the threads about unlocking bootloader in the redmi note 7, but none of them helped.
So the main problem is whenever I connect redmi into PC, it's recognized, but when I enter Mi Unlock app (miflash_unlock-en-3.5.1128.45), the phone is showing in left-up corner "..key to shutdown" (I can't see anything before key) and it's unmounting from PC.
I tried connecting it in many moments, but the result is the same. I tried also installing drivers from xiaomi, that you can install through the app itself, but it didn't change the results.
I've installed ADB app and drivers (as shown here: https://forum.xda-developers.com/showthread.php?t=2588979) and connected my device to mi account.
As in the thread on https://forum.xda-developers.com/redmi-note-7/how-to/one-redmi-note-7-unlock-bootloader-t3890751 I tried to check via ABS if my device is listed and there is the output:
C:\adb>fastboot devices
afd9005 fastboot
C:\adb>fastboot oem device-info
...
FAILED (command write failed (Unknown error))
finished. total time: 0.005s
Click to expand...
Click to collapse
And the device goes into that mode like from mi unlock app
I'm posting below the link to the screenshots of my phone's settings, os version and things that I've read could help (I don't know how to insert photos in the post other way).https://we.tl/t-O3Z7H6AABu
I've been fighting with it for too long... Maybe someone encountered this problem and/or is able to provide the fix.

You can see help here https://forum.xda-developers.com/redmi-note-7/help/fastboot-issues-t3964100
Should to try another PC or use a 2.0 USB HUB. I also have same problem with my laptop (core i3 with USB 3.0 port) but it's OK on an older PC (without USB 3.0)
Update: Hi, I found a better way to fix this problem. I did with my Dell 14 5447 (with Intel chipset and Windows 7). I uninstalled Intel(R) USB 3.0 eXtensible Host controler in Program and Features. And then download and install a newer driver from Intel (https://downloadcenter.intel.com/do...100-Series-and-Intel-C220-C610-Chipset-Family).

gazavn said:
You can see help here https://forum.xda-developers.com/redmi-note-7/help/fastboot-issues-t3964100
Should to try another PC or use a 2.0 USB HUB. I also have same problem with my laptop (core i3 with USB 3.0 port) but it's OK on an older PC (without USB 3.0)
Click to expand...
Click to collapse
Oh I didn't try with USB 2.0. I have one in Mobo, so on few hours I'm going to tell if it fixed the issue

gazavn said:
You can see help here https://forum.xda-developers.com/redmi-note-7/help/fastboot-issues-t3964100
Should to try another PC or use a 2.0 USB HUB. I also have same problem with my laptop (core i3 with USB 3.0 port) but it's OK on an older PC (without USB 3.0)
Click to expand...
Click to collapse
On my main PC plugging into a USB 2.0 on back panel didn't work, neither on my dad's PC, that have in the front panel USB 2.0.
So I opened the whole thing now on the laptop without USB 3.0 drivers installed. I installed win7 and I didn't have option in driver selection "Android", so I installed xiaomi drivers and just plugged the phone. AND IT WORKED! Now I just have to wait 102 hours XD
I have 2 modules inside my laptop that are connected to motherboard (1st include 2.0 usb, and 2nd 3.0, both on different sides of laptop), so they're in some way separated. I don't know how it would behave if I installed the drivers, but for now I'm not checking it.
Thanks you for help, I would never come up with that fix!
Just leaving the specs if it's caused by hardware and for someone who has the same:
i5-8400
B360M pro-vdh
Probably not improtant in this case, but just in case:
GTX 1060 3GB
16GB ram ballistix sport lt

=Terys;81704493]On my main PC plugging into a USB 2.0 on back panel didn't work, neither on my dad's PC, that have in the front panel USB 2.0.
So I opened the whole thing now on the laptop without USB 3.0 drivers installed. I installed win7 and I didn't have option in driver selection "Android", so I installed xiaomi drivers and just plugged the phone. AND IT WORKED! Now I just have to wait 102 hours XD
I have 2 modules inside my laptop that are connected to motherboard (1st include 2.0 usb, and 2nd 3.0, both on different sides of laptop), so they're in some way separated. I don't know how it would behave if I installed the drivers, but for now I'm not checking it.
Thanks you for help, I would never come up with that fix!
Just leaving the specs if it's caused by hardware and for someone who has the same:
i5-8400
B360M pro-vdh
Probably not improtant in this case, but just in case:
GTX 1060 3GB
16GB ram ballistix sport lt
My pleasure.