So I can't even get win 8 to install. It always asks for drivers for my sata device. I tried using the newest intel drivers from intel for the DX58SO mainboard(sorry can't post direct link) and extracted the drivers from the package to my usb drive. Now I've tried 8 different sata drivers in that package but have been unable to get it to accept the drivers. My sata mode is currently set to IDE
Am I just going to have to wait for the build to progress so that it'll accept the intel storage drivers?
try to update bios
It's been updated as well. Updating it actually shaved 15 or 20 seconds off the complete boot time to desktop but still not working for me. I have a feeling I'll have to wait a while before I can install this onto my spare drive.
from the product page of your board:
Six Serial ATA 3.0 Gb/s ports, including 2 eSATA port with RAID support supplied by a Marvell* controller
maybe you should try the marvell drivers, idk with sata ports are used by your hd / drives
Unable to find any marvel drivers. Only thing I can find on their site is for Ethernet. Ill just wait for a later build
Sent from my SAMSUNG-SGH-I997 using XDA App
marvell dot com -> support -> driver downloads (dropdown from support) -> 2nd entry ( 5/26/11 Windows Setup Installer (32- and 64-bit) for Yukon Controllers )
or direct link: www dot marvell dot com/support/downloads/driverDownload.do?driverId=175&action=1
Ack sorry. Used to associating Yukon with network drivers
Related
NOTE: I've now resolved this by running program, waiting for error message, close program, run program again.
Hi all,
Attempting to install HSPL onto my HTC HD2 (WWE) running latest stock rom. Followed steps as normal, connect and sync phone with PC (syncs everything successfully), then run 'HSPL3_PKG.exe' (I'm right-clicking and running as Administrator).
It successfully reboots my phone into bootloader (tri-colour screen) but just stays there, after a minute or so (whilst still saying "Waiting for USB connection..."), the program then pops up this error message:
I have tried several cables and different USB ports. I've also tried manually entering the bootloader then running the program (volume down and turn on), also disabled a/v & firewall - all to no avail.
I'm running Windows 7 32 bit professional, Windows Mobile Sync Center 6.1.
Phone software is as follows:
SPL-1.42.0000 XE
OS Version: 5.2.21869
ROM Version: 1.66.405.2
Radio version: 2.06.51.07
I'm a software engineer by profession so don't be afraid to get technical! Any help is very much appreciated.
It happens to some people that they simply cannot get it to work.
Usually it's enough to boot manually into bootloader, shift to a USB port directly on the mainboard, and right click run as admin, but even there some people just can't get it to work for no obvious reason. AV/firewall policies, perhaps, something to do with teh usb drivers, who can tell!
The quickest first test would be to try a different PC. Its a one off process anyway, since flashing and syncing works fine, its just hspl that can be funny.
(Not running on a virtual box are you?)
samsamuel said:
It happens to some people that they simply cannot get it to work.
Usually it's enough to boot manually into bootloader, shift to a USB port directly on the mainboard, and right click run as admin, but even there some people just can't get it to work for no obvious reason. AV/firewall policies, perhaps, something to do with teh usb drivers, who can tell!
The quickest first test would be to try a different PC. Its a one off process anyway, since flashing and syncing works fine, its just hspl that can be funny.
(Not running on a virtual box are you?)
Click to expand...
Click to collapse
Thank you very much for your suggestions, very much appreciated although I have solved this now - I did add a resolved message to the top of the message and in the subject including my solution.
Thanks again anyway though.
Why is DFT HSPL2 for HTC Leo so difficult?
Not resolved here although displayed error message is identical to yours. Tried your resolution and same critical error displays.
DFT HSPL2 for HTC Leo USB Connect Failed
Tried all desktop PC USB Ports 2 x Front, motherbaord Rear and 2 x PCI USB 4-port adapters
Followed other users comment; For anyone getting the "USB Connect failed" error, try plugging the phone into a different USB port.
On my desktop, for some reason the front-panel USB ports gave this error, but it worked fine when I used a rear port (failed for me)
Operating System System Model
Windows Vista Ultimate (x64) Service Pack 2 (build 6002)
Install Language: English (United States)
System Locale: English (United Kingdom) No details available
Processor a Main Circuit Board b
2.50 gigahertz Intel Core2 Quad Q9300
64 kilobyte primary memory cache
6144 kilobyte secondary memory cache
64-bit ready
Multi-core (4 total)
Not hyper-threaded
Board: ASUSTeK Computer INC. P5Q3 DELUXE Rev 1.xx
Serial Number:
Bus Clock: 333 megahertz
BIOS: American Megatrends Inc. 2105 05/26/2009
4096 Megabytes Usable Installed Memory
Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A
Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C
Intel(R) ICH10 Family USB Universal Host Controller - 3A34
Intel(R) ICH10 Family USB Universal Host Controller - 3A35
Intel(R) ICH10 Family USB Universal Host Controller - 3A36
Intel(R) ICH10 Family USB Universal Host Controller - 3A37
Intel(R) ICH10 Family USB Universal Host Controller - 3A38
Intel(R) ICH10 Family USB Universal Host Controller - 3A39
NEC PCI to USB Open Host Controller (6x)
Standard Enhanced PCI to USB Host Controller (3x)
I have noted that HD2 is shown connected in windows file manager. However, immediately HSPL2 process is executed the HD2 USB connection displayed disconnects
Why is DFT HSPL2 for HTC Leo so difficult?
PS: Second desktop pc is identical configuration to the PC in use here, so trying another PC is a bit of a sledge hammer
Alize said:
NOTE: I've now resolved this by running program, waiting for error message, close program, run program again.
Click to expand...
Click to collapse
This is the same as the recommendation to boot into bootloader manually, and then connect USB, wait for SERIAl to become USb and only then run hspl
watchdog2003 said:
Not resolved here although displayed error message is identical to yours. Tried your resolution and same critical error displays.
DFT HSPL2 for HTC Leo USB Connect Failed
Tried all desktop PC USB Ports 2 x Front, motherbaord Rear and 2 x PCI USB 4-port adapters
Followed other users comment; For anyone getting the "USB Connect failed" error, try plugging the phone into a different USB port.
On my desktop, for some reason the front-panel USB ports gave this error, but it worked fine when I used a rear port (failed for me)
Click to expand...
Click to collapse
because front mounted ports are connected via a usb hub on teh motherboard, , efectively a usb port into a usb port into the mainboard, whereas the ports around back are direct to teh mainboard.
Operating System System Model
Windows Vista Ultimate (x64) Service Pack 2 (build 6002)
Install Language: English (United States)
System Locale: English (United Kingdom) No details available
Processor a Main Circuit Board b
2.50 gigahertz Intel Core2 Quad Q9300
64 kilobyte primary memory cache
6144 kilobyte secondary memory cache
64-bit ready
Multi-core (4 total)
Not hyper-threaded
Board: ASUSTeK Computer INC. P5Q3 DELUXE Rev 1.xx
Serial Number:
Bus Clock: 333 megahertz
BIOS: American Megatrends Inc. 2105 05/26/2009
4096 Megabytes Usable Installed Memory
Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A
Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C
Intel(R) ICH10 Family USB Universal Host Controller - 3A34
Intel(R) ICH10 Family USB Universal Host Controller - 3A35
Intel(R) ICH10 Family USB Universal Host Controller - 3A36
Intel(R) ICH10 Family USB Universal Host Controller - 3A37
Intel(R) ICH10 Family USB Universal Host Controller - 3A38
Intel(R) ICH10 Family USB Universal Host Controller - 3A39
NEC PCI to USB Open Host Controller (6x)
Standard Enhanced PCI to USB Host Controller (3x)
I have noted that HD2 is shown connected in windows file manager. However, immediately HSPL2 process is executed the HD2 USB connection displayed disconnects
Why is DFT HSPL2 for HTC Leo so difficult?
PS: Second desktop pc is identical configuration to the PC in use here, so trying another PC is a bit of a sledge hammer
Click to expand...
Click to collapse
somepoeple simply never get a particular PC to wor, no apparent reason.
The usual three suggestions apply
1 - never forget to right click and 'run as administrator'
2 - boot into bootloader manually, connect usb, wait for serial to become usb, then run hspl
3 - try all your ports, but especially try the ones around back.
EDIT - oh wait, you are on 64bit, there are tons of threads where 64bit wont work. Got a handy 32 bit machine around anywhere?
2010 Resolution on why is DFT HSPL2 for HTC Leo so difficult?
Resolution is resurrect from dead an Acer Aspire 3634 WLMI model ZL6 Mfg date 05 2006.
Update with my today considered sensible software that is Windows XP PRO SP3, current windows updates, antivirus and malware removal software ensuring laptop free of all unnecessary cookies and crap.
Using CNET.com downloaded and installed the three stars Microsoft Activesync 4.5.
USB cable only (no HTC HD2 cradle works here) connect HTC HD2 and run DFT HSPL2 to successfully installed and SPL now displays
PB1100 HX-BC
SPL-2.08.HSPL 8C XE
0x05
CotullaHSPL 0x40
Moral of this story is that you only need a time machine or computer that goes backwards.
Thanks to DFT team
still getting the error with hspl3 on my xp 32 bit machine
update: installing Microsoft Activesync 4.5. seemed to fix the problem
Solution to USB failed problem
Hi, This is simple as a piece of cake
1)Make sure you can access your phone with USB cable or it does'nt show any message like 'Insert disk into drive'.
2)Just Turn on USB option from your mobile device & run HSPL as administrator.
Humair,
Computer Systems Engineer.
I bet you download updated HTC USB sync driver and install it
This will solve your issue.
In wondows vista/ Windows 7 update the device driver in device manager and select to search in the seb for drivers.
I'm missing driver for PCI Simple Communications Controller and PCI Serial Port.
I'm running Win7 x64.
Can anyone help?
Are you using the stock launcher when you connect your tab to the PC? Are you using kies? Because it contains all the necessary drivers.
I am using Kies.
I finally contacted a HP Support Representative, who guided me to installation of the Intel Active Management Technology drivers which also contained the necessary drivers for PCI Simple Communications Protocol and the PCI Serial Port.
Now, I've managed to sync my GT through Kies, but the connection between the device and my PC (Win7 x64 system) seems to become lost constantly.
Now bricked...!!!
Of cource I couldn't wait to update the firmware, so I downloaded the latest version from samfirmware.com and started the flashing process through Odin3... and now my GT seems bricked as it lost connection in the beginning of the flashing process, and now it won't start at all. Just showing a nasty communication error picture on the screen...
HELP!
ftgg99 said:
Are you using the stock launcher when you connect your tab to the PC? Are you using kies? Because it contains all the necessary drivers.
Click to expand...
Click to collapse
This applies to a specific device not on these forums but running Windows 8
I upgraded from Windows 7 on my Viliv N5 and now the webcam and a "Marvell 802.11 sd8686 Wireless LAN SDIO" won't start... I checked both online and computer manufacture... I got drivers from the computer manufacture that hard reboots and one from online with: "Error code:10 Device Cannot Start"
As for the webcam I might have to call the now shutdown business so I'm hoping for a fix...
Did you do an in-place upgrade, or did you do a clean install that replaced Win7? In-place is supposed to work, but in my experience it almost never does it perfectly. Clean install is the way to go. Copy your driver files to a flashdrive or something first in case Win8 can't find them, but usually it can.
Alternate option: Uninstall theoffending drivers (entirely; use Device Manager and remove the driver software). Then reboot the PC and see if it tries to load the drivers from Windows Update. This *should* find them. If it doesn't, try installing the drivers from disc / downloaded files.
Tried Windows Update as soon as I did a CLEAN install... wiped HDD incl recovery >.<
I can provide device id... and the website gives me a corrupt driver
Edit: Will do a "Dirty Install" if I reinstall stock will my key expire?
I recently wanted to install windows 10 on my Tablet Samsung Activ Tab 3 - XE300TZC-K01PT through the windows update but in the process I had an error in the windows 8.1 installation process that damaged the boot partition.
I contacted Samsung Portugal to request the recovery disk and until today I am waiting for an answer ...
I decided to search and after a few days I managed to get everything worked.
here is the installation process that worked for me!
1 º We need some things.
1- Micro USB OTG (I made my usb otg)
2- Usb hub
3- Keyboard
4- Mouse
5- usb to ethernet (I used D-Link DUB-1312)
6- USB Pen 16Gb
2º We need to download a specific image of windows 10 (February 2016 Windows 10 HOME / PRO) (heidoc(DOT)net) find (Microsoft Windows and Office ISO Download Tool)
3º Make the USB pen boot with rufus(DOT)ie
After the creation of the bootavel pen is completed we need to download and put this on the pen drive :
HD Graphics Driver - downloadcenter(DOT)intel(DOT)com/download/25027/Intel-Iris-Iris-Pro-and-HD-Graphics-Beta-Driver-for-Windows-10
SW Update - [samsung(DOT)com FIND XE300TZC-K01PT ]
Drivers for your network card to USB
On the Samsung Activate tab 3 let's bios (press Power and Volume -) and we need to turn off the secure boot and disable fast boot. do save
We turn off the tablet and we go by the micro usb cable (OTG) + USB HUB + mouse + keyboard + pen of windows 10
We started the power the Samsung activ 3 tab and loaded it several times in the volume - to enter the boot manager
Then we should see our pen drive we created earlier
at this time it is just like a windows 10 installation as on a normal computer.
After installing the PC there are no drivers for the internet card and for this we installed the external network card drivers for USB which mine is the D-Link DUB-1312
We installed the graphics driver - HD Graphics Driver
We installed the Samsung-SW Update drivers and look for our XE300TZC model and downloaded all drivers (1.70Gb)
(DO NOT INSTALL the graphics driver contained in this package)
In the end it is only to do the windows update and install the microsoft office.
Any idea where to get the drivers serperate? I try Windows 8.1 but I have no touch/wifi etc
Duarte.map said:
I recently wanted to install windows 10 on my Tablet Samsung Activ Tab 3 - XE300TZC-K01PT through the windows update but in the process I had an error in the windows 8.1 installation process that damaged the boot partition.
I contacted Samsung Portugal to request the recovery disk and until today I am waiting for an answer ...
I decided to search and after a few days I managed to get everything worked.
here is the installation process that worked for me!
1 º We need some things.
1- Micro USB OTG (I made my usb otg)
2- Usb hub
3- Keyboard
4- Mouse
5- usb to ethernet (I used D-Link DUB-1312)
6- USB Pen 16Gb
2º We need to download a specific image of windows 10 (February 2016 Windows 10 HOME / PRO) (heidoc(DOT)net) find (Microsoft Windows and Office ISO Download Tool)
3º Make the USB pen boot with rufus(DOT)ie
After the creation of the bootavel pen is completed we need to download and put this on the pen drive :
HD Graphics Driver - downloadcenter(DOT)intel(DOT)com/download/25027/Intel-Iris-Iris-Pro-and-HD-Graphics-Beta-Driver-for-Windows-10
SW Update - [samsung(DOT)com FIND XE300TZC-K01PT ]
Drivers for your network card to USB
On the Samsung Activate tab 3 let's bios (press Power and Volume -) and we need to turn off the secure boot and disable fast boot. do save
We turn off the tablet and we go by the micro usb cable (OTG) + USB HUB + mouse + keyboard + pen of windows 10
We started the power the Samsung activ 3 tab and loaded it several times in the volume - to enter the boot manager
Then we should see our pen drive we created earlier
at this time it is just like a windows 10 installation as on a normal computer.
After installing the PC there are no drivers for the internet card and for this we installed the external network card drivers for USB which mine is the D-Link DUB-1312
We installed the graphics driver - HD Graphics Driver
We installed the Samsung-SW Update drivers and look for our XE300TZC model and downloaded all drivers (1.70Gb)
(DO NOT INSTALL the graphics driver contained in this package)
In the end it is only to do the windows update and install the microsoft office.
Click to expand...
Click to collapse
Hello,
I need just Wireless / Bluetooth device's driver (or just model number's name). SW Update's working or not is depending on the wireless driver. If wireless device doesn't work, so SW Update doesn't work, unfortunatelly. Could you help us on this matter, please? Thanks.
I just downloaded the SW Update on a different PC where I can choose the XE300 and download its drivers, nothing works on windows 10, but at least I have something. You can DM me if you do not succeed to download yourself
Windijk said:
I just downloaded the SW Update on a different PC where I can choose the XE300 and download its drivers, nothing works on windows 10, but at least I have something. You can DM me if you do not succeed to download yourself
Click to expand...
Click to collapse
Hello, Thanks for your help.
I installed SW Update on another PC as you said. I found the drivers from the model's number. I tried to extract them to the desktop. Wireless LAN Driver is 5,92 MB. But, unfortunatelly it's not extracted to the desktop.
SW UPDATE says "İt's successfully extracted" but it doesn''t extract unfortunatelly.
And also unfortunatelly SW UPDATE doesn't show the Wireless Card's manufacturer's name. But the version number is 3.2.2.3662. If I know the manufacturer's name, I will try to find it on internet. But unfortunatelly it's not shown on SW UPDATE.
I've installed a clean version of windows 10 on my samsung xe300tzc but cant get the touchscreen, wifi, sound and bluetooth to work with many problems showing in device manager. I used the threads in the previous comments but they appear to be dead or of not use. Please can anyone advise where can I get these drivers.
anothergo said:
I've installed a clean version of windows 10 on my samsung xe300tzc but cant get the touchscreen, wifi, sound and bluetooth to work with many problems showing in device manager. I used the threads in the previous comments but they appear to be dead or of not use. Please can anyone advise where can I get these drivers.
Click to expand...
Click to collapse
Have you solved your problem? I updated mine to windows 10 from windows 8.1 and it everything works. If you are interested and it is possible I could somehow export the drivers and upload them for you?
gtataki said:
Have you solved your problem? I updated mine to windows 10 from windows 8.1 and it everything works. If you are interested and it is possible I could somehow export the drivers and upload them for you?
Click to expand...
Click to collapse
Hello can I get a screenshot of your drivers in the Device Manager and also if possible an export of the drivers? Thank you
AxionMatter said:
Hello can I get a screenshot of your drivers in the Device Manager and also if possible an export of the drivers? Thank you
Click to expand...
Click to collapse
I exported all third party drivers here. Hope this helps.
Duarte.map said:
I recently wanted to install windows 10 on my Tablet Samsung Activ Tab 3 - XE300TZC-K01PT through the windows update but in the process I had an error in the windows 8.1 installation process that damaged the boot partition.
I contacted Samsung Portugal to request the recovery disk and until today I am waiting for an answer ...
I decided to search and after a few days I managed to get everything worked.
here is the installation process that worked for me!
1 º We need some things.
1- Micro USB OTG (I made my usb otg)
2- Usb hub
3- Keyboard
4- Mouse
5- usb to ethernet (I used D-Link DUB-1312)
6- USB Pen 16Gb
2º We need to download a specific image of windows 10 (February 2016 Windows 10 HOME / PRO) (heidoc(DOT)net) find (Microsoft Windows and Office ISO Download Tool)
3º Make the USB pen boot with rufus(DOT)ie
After the creation of the bootavel pen is completed we need to download and put this on the pen drive :
HD Graphics Driver - downloadcenter(DOT)intel(DOT)com/download/25027/Intel-Iris-Iris-Pro-and-HD-Graphics-Beta-Driver-for-Windows-10
SW Update - [samsung(DOT)com FIND XE300TZC-K01PT ]
Drivers for your network card to USB
On the Samsung Activate tab 3 let's bios (press Power and Volume -) and we need to turn off the secure boot and disable fast boot. do save
We turn off the tablet and we go by the micro usb cable (OTG) + USB HUB + mouse + keyboard + pen of windows 10
We started the power the Samsung activ 3 tab and loaded it several times in the volume - to enter the boot manager
Then we should see our pen drive we created earlier
at this time it is just like a windows 10 installation as on a normal computer.
After installing the PC there are no drivers for the internet card and for this we installed the external network card drivers for USB which mine is the D-Link DUB-1312
We installed the graphics driver - HD Graphics Driver
We installed the Samsung-SW Update drivers and look for our XE300TZC model and downloaded all drivers (1.70Gb)
(DO NOT INSTALL the graphics driver contained in this package)
In the end it is only to do the windows update and install the microsoft office.
Click to expand...
Click to collapse
Hi.
Was this due to an error 0x10000001?
If yes, kindly explain deeper.
Thank you.
hello guys, is possible to instal chrome os flex?
I've read the threads about unlocking bootloader in the redmi note 7, but none of them helped.
So the main problem is whenever I connect redmi into PC, it's recognized, but when I enter Mi Unlock app (miflash_unlock-en-3.5.1128.45), the phone is showing in left-up corner "..key to shutdown" (I can't see anything before key) and it's unmounting from PC.
I tried connecting it in many moments, but the result is the same. I tried also installing drivers from xiaomi, that you can install through the app itself, but it didn't change the results.
I've installed ADB app and drivers (as shown here: https://forum.xda-developers.com/showthread.php?t=2588979) and connected my device to mi account.
As in the thread on https://forum.xda-developers.com/redmi-note-7/how-to/one-redmi-note-7-unlock-bootloader-t3890751 I tried to check via ABS if my device is listed and there is the output:
C:\adb>fastboot devices
afd9005 fastboot
C:\adb>fastboot oem device-info
...
FAILED (command write failed (Unknown error))
finished. total time: 0.005s
Click to expand...
Click to collapse
And the device goes into that mode like from mi unlock app
I'm posting below the link to the screenshots of my phone's settings, os version and things that I've read could help (I don't know how to insert photos in the post other way).https://we.tl/t-O3Z7H6AABu
I've been fighting with it for too long... Maybe someone encountered this problem and/or is able to provide the fix.
You can see help here https://forum.xda-developers.com/redmi-note-7/help/fastboot-issues-t3964100
Should to try another PC or use a 2.0 USB HUB. I also have same problem with my laptop (core i3 with USB 3.0 port) but it's OK on an older PC (without USB 3.0)
Update: Hi, I found a better way to fix this problem. I did with my Dell 14 5447 (with Intel chipset and Windows 7). I uninstalled Intel(R) USB 3.0 eXtensible Host controler in Program and Features. And then download and install a newer driver from Intel (https://downloadcenter.intel.com/do...100-Series-and-Intel-C220-C610-Chipset-Family).
gazavn said:
You can see help here https://forum.xda-developers.com/redmi-note-7/help/fastboot-issues-t3964100
Should to try another PC or use a 2.0 USB HUB. I also have same problem with my laptop (core i3 with USB 3.0 port) but it's OK on an older PC (without USB 3.0)
Click to expand...
Click to collapse
Oh I didn't try with USB 2.0. I have one in Mobo, so on few hours I'm going to tell if it fixed the issue
gazavn said:
You can see help here https://forum.xda-developers.com/redmi-note-7/help/fastboot-issues-t3964100
Should to try another PC or use a 2.0 USB HUB. I also have same problem with my laptop (core i3 with USB 3.0 port) but it's OK on an older PC (without USB 3.0)
Click to expand...
Click to collapse
On my main PC plugging into a USB 2.0 on back panel didn't work, neither on my dad's PC, that have in the front panel USB 2.0.
So I opened the whole thing now on the laptop without USB 3.0 drivers installed. I installed win7 and I didn't have option in driver selection "Android", so I installed xiaomi drivers and just plugged the phone. AND IT WORKED! Now I just have to wait 102 hours XD
I have 2 modules inside my laptop that are connected to motherboard (1st include 2.0 usb, and 2nd 3.0, both on different sides of laptop), so they're in some way separated. I don't know how it would behave if I installed the drivers, but for now I'm not checking it.
Thanks you for help, I would never come up with that fix!
Just leaving the specs if it's caused by hardware and for someone who has the same:
i5-8400
B360M pro-vdh
Probably not improtant in this case, but just in case:
GTX 1060 3GB
16GB ram ballistix sport lt
=Terys;81704493]On my main PC plugging into a USB 2.0 on back panel didn't work, neither on my dad's PC, that have in the front panel USB 2.0.
So I opened the whole thing now on the laptop without USB 3.0 drivers installed. I installed win7 and I didn't have option in driver selection "Android", so I installed xiaomi drivers and just plugged the phone. AND IT WORKED! Now I just have to wait 102 hours XD
I have 2 modules inside my laptop that are connected to motherboard (1st include 2.0 usb, and 2nd 3.0, both on different sides of laptop), so they're in some way separated. I don't know how it would behave if I installed the drivers, but for now I'm not checking it.
Thanks you for help, I would never come up with that fix!
Just leaving the specs if it's caused by hardware and for someone who has the same:
i5-8400
B360M pro-vdh
Probably not improtant in this case, but just in case:
GTX 1060 3GB
16GB ram ballistix sport lt
My pleasure.