Steering wheel and agama - Android Head-Units

Hi to all, after root and delete some app in sistem and re installed other some app i find this problem:
In home screen (agama launcher) i can use spotify like widget player, but i can't use steering wheel control to change song. Volume go up and down whit out any problem. Some one have any idea?!?
P. S.: my head unit is panlelo allwinner t3 whit android 4.4 and i use steering wheel control from AVC can bus decoder on key 1 and key 2 wire

Related

Steering wheel control mapping help.

Evening all.
I have an xtrons 4.4 HU, it's fitted with a canbus decoder in and Audi A4.
The HU came with the steering wheel controls preset, I've tried to map them to add my own touch but I can't. When I go into the steering wheel control option, I operate a key and he screen does not recognise this, I've also tried highlighting a button then trying to use a steeeing wheel button and it still doesn't recognise it.
What ami missing guys? All the YouTube and Google tutorials say to do it how I am!
Thanks.
I have the same issue on a 2012 Mazda 3, the head unit only recognizes a direct voltage input from the steering wheel buttons, yours is probably controlled by the CANBUS, with the head unit, there should be 2 wires (Key1 and Key2), they should be connected to the car wiring I believe. Please wait for someone with more experience to confirm.
Sent from my SM-N910F using Tapatalk
From what I've read they are connected through canbus but I have no idea how to work around this. Thanks.
Anyone? Tried downloading the rk1188 headunit app but it does nothing!
interested about!
Anyone please?

Joying Steering Wheel Mapping (2014 VW Passat)

Hi there
I installed a JY-VM131N2 in my 2014 VW Passat. The Steering Wheel is working (out of the stock).
I'd like to change the mapping of the buttons, but all of them shows Parameter 255. Video is attached under the link:
https://1drv.ms/v/s!AiWHrfhlX2gwwytL4cOZcTs_fcov
Can you help me to change the mapping?
Answer from Joying:
Nice day
I am sorry can not support to remap the steering wheel control buttons
Hope you can understand
Can anybody help?
Regards
ch_swat_89
ch_swat_89 said:
Hi there
I installed a JY-VM131N2 in my 2014 VW Passat. The Steering Wheel is working (out of the stock).
I'd like to change the mapping of the buttons, but all of them shows Parameter 255. Video is attached under the link:
https://1drv.ms/v/s!AiWHrfhlX2gwwytL4cOZcTs_fcov
Can you help me to change the mapping?
Answer from Joying:
Nice day
I am sorry can not support to remap the steering wheel control buttons
Hope you can understand
Can anybody help?
Regards
ch_swat_89
Click to expand...
Click to collapse
You have a CAN decoder (a little box attached to the harness) that is programmed with a certain steering wheels keys mapping and you can't change that.
Your best chance is to wire the steering wheels buttons directly and bypass the CAN decoder, but it works ONLY IF the steering wheel buttons are the resistive type.
If you don't have the experience please don't try to mess with the wires... things can go wrong with the headunit or the car.

PX6 with skip track/next track button or bluetooth remote?

Hi,
I have old cars without steering wheel stereo controls. But maybe some cheap new cars still don't have these, so some may relate.
Universal 2din Head units with px6 4gb and 7" screen (there would be space for more ) don't have skip track/next track button.
I also tried to find if there is way to use some Bluetooth remote with these units, but all info seems to be that it does not work.
I don't want to hard wire controls to steering wheel.
Is there some head unit that I missed? Is there a way to make bluetooth remotes work?
Maybe something with sc9853i has next track button?
BTW i found this video https://www.youtube.com/watch?v=wptzk5W6uxI - i did not know there were any px5 with matte screen!

MTK8667 with BMW can't use streering wheel button

Hi, I buy android12 HU with MTK8667 for BMW F20. Now in the factory setting select Canbus as Zmyt is can connect with Drive already.
But have problem is when select source from Android screen (touch screen) can't play FM from screen but still use from Drive.
And can't use buttons on the steering wheel for control sound or cheage FM just change mode only.
Problem
- Can't use buttons on streering wheel such as volume +/-, change FM station
- Sound will overlap if playing FM via iDrive and playing music or youtube from android will overlap.
I don't know how the problem is caused by the firmware or the settings, attached the image of the software below, who can help me? If you would like more information, we will be happy to send you information. Because the seller couldn't answer any questions for me.
This unit is not an FYT. Requested moderator move to the generic dumping (Android head-units) forum

JUNSUN V1 PRO UIS 8581A (TS18) - SW key change with CANBUS decoder plugged in

Hello everyone, it's been a while in this forum .
I recently purchased a unit from Junsun with processor UIS 8581A (this was not provided in the add) and started to play with the unit on my SEAT Ibiza 2011 (09-2013)
I noticed that the steering wheel commands are connected through the CANBUS decoder unit from Simplesoft and I am unable to change the keys.
Furthermore I am stuck in a carousel of commands for "MODE" key on the steering wheel tat swaps through NAVI>MUSIC>VIDEO>AUXIN>BT>Ipod and i think something else ) and I only need NAVI and MUSIC.
Details regarding unit:
Platform information TS18
CPU UIS8581A (8CORTEX a55 @1.6GHZ), 4Gb Ram
GPU dual core Mali G-52 3EE
Sound processor AK7604
Radio module TDA7708
Bluetooth 5.0
CAN VERSION:V3.88.139BYPS
MCU VERSION:TS18.1.1
SYSTEM VERSION;TS18.2.2 (20220629)
ANDROID VERSION 11.0
I would like to ask for help for these Issues, questions:
1. Is there any way to change the "Mode" function on the steering wheel control (canbus decoder connected) to only carousel for specific apps.
2. Can I change the default music app to let's say Youtube music?
3. How to change control keys on steering wheel with CANBUS decoder connected? And if it's not possible is there a way without the CANBUS decoder connected, what are the downsides if this can occur?
4. I saw that there is a very big thread on another forum about these units but not here :-? why? (I live in europe and my unit came from Poland)
I searched the forum and tried SWC car switcher app, and some others but the buttons from steering wheel had the highest priority either way :-(
Thank you and sorry for the TLDR!
bump
tazere said:
I searched the forum and tried SWC car switcher app, and some others but the buttons from steering wheel had the highest priority either way :-(
Thank you and sorry for the TLDR!
Click to expand...
Click to collapse
Some people disabled the standard SWC mode key by removing all apps from factory settings and use it for AppSwitcher:
Post in thread 'AppSwitcher - smart SWC launcher (for Junsun and similar devices) incl. autostart' https://forum.xda-developers.com/t/...-devices-incl-autostart.4435555/post-87531251
Another approach is to check if the SWC of Seat Ibiza is a resistance matrix and the connections are exposed to the wiring harness.
TorstenH said:
Some people disabled the standard SWC mode key by removing all apps from factory settings and use it for AppSwitcher:
Post in thread 'AppSwitcher - smart SWC launcher (for Junsun and similar devices) incl. autostart' https://forum.xda-developers.com/t/...-devices-incl-autostart.4435555/post-87531251
Another approach is to check if the SWC of Seat Ibiza is a resistance matrix and the connections are exposed to the wiring harness.
Click to expand...
Click to collapse
Hi Torsten and thank you for the reply, I tried to remove the apps but unfortunately my factory settings doesn't have that option on TS 18 platform tried with 8878 like in the link you posted :-(. Thank you anyway

Categories

Resources