So..instead of installing twrp through flashify from "recovery image" i accidentally choose "boot image" ..now if i power my phone it goes straight to twrp..if i enter in recovery..still twrp..only download mode and twrp..what can i do?? please help..it just won't boot to system..my phone is galaxy note 4 n910c
IceOnMyBraiN said:
So..instead of installing twrp through flashify from "recovery image" i accidentally choose "boot image" ..now if i power my phone it goes straight to twrp..if i enter in recovery..still twrp..only download mode and twrp..what can i do?? please help..it just won't boot to system..my phone is galaxy note 4 n910c
Click to expand...
Click to collapse
Simply odin back to stock.
i'm on 5.1.1. any stock i try to flash it's giving me errors.. " SWREV. CHECK FAIL DEVICE: 2, BINARY: 1 " this is what phone shows me and in odin:
" <ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1) "
i really don't know what to do..please help..
IceOnMyBraiN said:
i'm on 5.1.1. any stock i try to flash it's giving me errors.. " SWREV. CHECK FAIL DEVICE: 2, BINARY: 1 " this is what phone shows me and in odin:
" <ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1) "
i really don't know what to do..please help..
Click to expand...
Click to collapse
First make sure that the firmware is for your phone, secondly uninstall Samsung Kies.
Reboot your PC
Then install Samsung USB drivers:
https://www.androidfilehost.com/?fid=24052804347849220
Then run Odin as admin and make sure no security software is interfering, temporarily switching it off might be advised.
Odin v3.10.7:
https://www.androidfilehost.com/?fid=24052804347851815
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button.
I tried,It didn't worked..but I fixed it by downloading erobot rom and putting it into my sd card and then flash it trough twrp,thank you for the answer and the help tho thread closed ^_^
Hey guys,
i gut some serious problems with my Galaxy S4 (GT-I9505)
I was running Cyanogen Mod 12.1 with CWM Recovery. After trying to update to CM13 and the appropriate Gapps i noticed some problems installing gapps with CWM. After searching the internet i decided to try it with TWRP instead of CWM. So i used the App Rashr Flash Tool to Flash the latest TWRP Recovery.
After flashing TWRP i rebooted the device and got stuck at the Samsung welcome screen. In the right upper corner is displayed the following:
RECOVERY BOOTING. . . .
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
Unfortunatelly the phone does not load the recovery or start the OS. The only option i recognized is to enter the download mode by pushing Home + Vol.Down + PWR.
So i tried to use Odin to reinstall TWRP correctly over download mode and this is what Odin puts out.
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
When i now restart the phone i got following message on the screen:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again
After installing Kies it says that my device is not supportet...
So no i have no idea what else i can do to get my phone running again...
Does anyone has an idea?
Best Regards and thanks
Did you try flashing the latest stock ROM from sammobile.com?
Maybe use Odin to flash the latest version of TWRP to see if you can enter recovery?
The solution is easy. Use a different usb port / different usb cable.
Well a different USB-Port got me one step further.
It seems that odin flashed the recovery successfully:
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
After that my phone booted back into my current android / cm OS
Unfortunatelly, if i try to reboot directly into the recovery, i get stuck in the samsung welcome screen again. Means i can not access the recovery...
Use a different recovery thats my advice, i have a same issue as you maybe someone could help me, i open a new thread there also
Try this: unchecked everything except f.reset time in Odin before flashing TWRP, connect phone, flash TWRP, when you see the word "RESET" in the status windows, remove USB cable, remove battery, replace battery, use button combination to boot into recovery. When the phone powers up, let the power button go but keep holding home and volume up.
somehow i fixed it...
i re-re-reflashed twrp and suddenly everything went fine.
Thanks for your help and real quick responses!
great forum!
Hello the phone I'm using is s5 active at&t.
I followed this guide http://forum.xda-developers.com/att-galaxy-s5/general/how-to-root-g870aucu1ang3-gs5-active-t2868776
used this G870A_NE4_Stock_Kernel.tar.md5
But for some reason everything went to the dumps. I then looked up some guides and got a stock firmware from sammobile G870AUCU1ANE4_G870AATT1ANE4_G870AUCU1ANE4_HOME.tar.md5
Odin recognizes the phone as it shows it in the ID:COM area but then it fails.
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
this is what appears on my phone: sw rev check fail fused 2 binary 1
My first time trying to root. It brings me to the recovery screen with a bunch of options and I'm capable of getting it to the download screen holding volume, home, power.
Please any help would be great.
edit. also tried this https://www.youtube.com/watch?v=8481Qm0l010 didn't do anything, but it passed on odin
edit. trying this guide out doing note.4 http://forum.xda-developers.com/att...w-to-update-to-g870aof2-5-0-keeproot-t3161733
edit I went through this process a few times http://www.modifyandroid.com/stock-...ck-rom-for-samsung-galaxy-s5-active-sm-g870a/ and it always fails on odin
This is what the recovery menu looks like
Android system recovery <3e>
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from adb
apply update from external storage
apply update from cache
wipe data/factory reset
wipe cache partition
reboot to bootloader
power down
view recovery logs
enable cp logging
disable cp logging
My main problem right now is that it fails whenever I try to flash it with a stock rom. But when I flash it with a kernal or other stuff it passes.
So I attempted to root my S7 using this root guide here and followed all the steps here but when i got to step 3 where you flash G930A.TAR odin says the proccess passed but my phone didnt reboot and started bootlooping, and attempting to boot the phone in recovery it just shows "recovery booting" in the corner without recovery actually launching.
After all that i attempted to flash several stock roms from sammobile for my model number to no avail, odin would either lag out on setup connection or fail within seconds of starting, heres an example
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> emmc_appsboot.mbn
<ID:0/004> lksecapp.mbn
<ID:0/004> xbl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
also tried smart switch but i dont have my serial number so cant do much there
however i tried to flash the G930A.tar file agan after it bricked and odin says it passed but it still bootloops
thats pretty much where im at now, all my usb drivers are up to date and i tried using both odin 3.12 and prince comsey without any differences
any help would be greately appreciated and if you need more info please let me know
I gonna help you if you've not fixed your phone.
First you need to download your last firmware (In this case for G930P -> QJ3 or QKx, x= 1 or 2, I don't remember the last number)
Download 7Zip and ODIN by Prince Comsey
Then go to this XDA post and download tar-Tool_Odin3-v3.10.7_by_mkh.mourad.zip
1. Install 7Zip
2. Extract files from your firmware (AP, BL, CP, CSC)
3. Right click on AP File (AP_G930PVPU5BXXX........MULTI_CERT_meta.tar.md5) and open with 7Zip
4. Extract the boot.img and recovery.img to Desktop (Make sure it ends with .img extension)
5. Extract the tar-Tool_Odin3.zip to Desktop
6. Copy boot.img and recovery.img to tar-Tool_Odin3 Folder
7. double-click on the "ImgToTar.MD5.bat" file. It should launch the tool for the conversion process.
8. Now you'll have boot.tar.md5 and recovery.tar.md5 in the tar-Tool_Odin3 Folder
9. Put your phone in Download Mode and launch ODIN by Prince Comsey, flash the files (recovery.tar.md5 to BL and boot.tar.md5 to AP)
10. Your phone will reboot so when the screen is turned off, immediately press the key combination again to access the download mode
11. Now you need to flash BL, CP and CSC with your original firmware files (BL_G930PVPU5BXXX........MULTI_CERT.tar.md5, CP_G930PVPU5BXXX.......MULTI_CERT.tar.md5 and CSC_SPT_G930PSPT5BXXX....MULTI_CERT.tar.md5)
12. Phone will reboot again, when the screen off, immediately press the key combination again to access the download mode
13. Now flash AP with original firmware file (AP_G930PVPU5BXXX.....MULTI_CERT_meta.tar.md5)
14. Now your phone will boot. Wipe cache and factory reset through Recovery Mode and now you can use your phone again.
I hope to help with your problem.
PS. XXX means compilation ID
This was able to help me! Thank you for posting it. I had the same problem on my SM-930P. I was able to get to step 10, and the phone got out of the boot loop. However, When I tried to reflash BL, CP, and CSC, I get this even if I use a PIT file..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> emmc_appsboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> lksecapp.mbn
<ID:0/004> xbl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Have any advise? What do these files do?
ImmortalQuail said:
So I attempted to root my S7 using this root guide here and followed all the steps here but when i got to step 3 where you flash G930A.TAR odin says the proccess passed but my phone didnt reboot and started bootlooping, and attempting to boot the phone in recovery it just shows "recovery booting" in the corner without recovery actually launching.
After all that i attempted to flash several stock roms from sammobile for my model number to no avail, odin would either lag out on setup connection or fail within seconds of starting, heres an example
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> emmc_appsboot.mbn
<ID:0/004> lksecapp.mbn
<ID:0/004> xbl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
also tried smart switch but i dont have my serial number so cant do much there
however i tried to flash the G930A.tar file agan after it bricked and odin says it passed but it still bootloops
thats pretty much where im at now, all my usb drivers are up to date and i tried using both odin 3.12 and prince comsey without any differences
any help would be greately appreciated and if you need more info please let me know
Click to expand...
Click to collapse
This is actually caused by you trying to root 7.0 firmware with a 6.0 root. Merely do the same process with this file.
I had the exact same problem with bootloops. You are following an outdated guide with outdated files!
Below is the tutorial I followed (in case you need it):
https://www.google.com/amp/s/forum....how-rooted-nougat-s7-edge-g935t-t3567502/amp/
Please help
enrique_b06 said:
I gonna help you if you've not fixed your phone.
First you need to download your last firmware (In this case for G930P -> QJ3 or QKx, x= 1 or 2, I don't remember the last number)
Download 7Zip and ODIN by Prince Comsey
Then go to this XDA post and download tar-Tool_Odin3-v3.10.7_by_mkh.mourad.zip
1. Install 7Zip
2. Extract files from your firmware (AP, BL, CP, CSC)
3. Right click on AP File (AP_G930PVPU5BXXX........MULTI_CERT_meta.tar.md5) and open with 7Zip
4. Extract the boot.img and recovery.img to Desktop (Make sure it ends with .img extension)
5. Extract the tar-Tool_Odin3.zip to Desktop
6. Copy boot.img and recovery.img to tar-Tool_Odin3 Folder
7. double-click on the "ImgToTar.MD5.bat" file. It should launch the tool for the conversion process.
8. Now you'll have boot.tar.md5 and recovery.tar.md5 in the tar-Tool_Odin3 Folder
9. Put your phone in Download Mode and launch ODIN by Prince Comsey, flash the files (recovery.tar.md5 to BL and boot.tar.md5 to AP)
10. Your phone will reboot so when the screen is turned off, immediately press the key combination again to access the download mode
11. Now you need to flash BL, CP and CSC with your original firmware files (BL_G930PVPU5BXXX........MULTI_CERT.tar.md5, CP_G930PVPU5BXXX.......MULTI_CERT.tar.md5 and CSC_SPT_G930PSPT5BXXX....MULTI_CERT.tar.md5)
12. Phone will reboot again, when the screen off, immediately press the key combination again to access the download mode
13. Now flash AP with original firmware file (AP_G930PVPU5BXXX.....MULTI_CERT_meta.tar.md5)
14. Now your phone will boot. Wipe cache and factory reset through Recovery Mode and now you can use your phone again.
I hope to help with your problem.
PS. XXX means compilation ID
Click to expand...
Click to collapse
Hi so far the step 1-10 it perfect but the 10 I cant make it, the error remains
<ID:0/006> SingleDownload.
<ID:0/006> emmc_appsboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> lksecapp.mbn
<ID:0/006> xbl.elf
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help me with this thx
darieldap said:
Hi so far the step 1-10 it perfect but the 10 I cant make it, the error remains
<ID:0/006> SingleDownload.
<ID:0/006> emmc_appsboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> lksecapp.mbn
<ID:0/006> xbl.elf
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help me with this thx
Click to expand...
Click to collapse
Did you read the post directly above yours?
I can help you if u still facing this problem
I have dont everything as u said but in 11th step when i am trying to flash with original software then its like write operation failed... what should i do.. please help me out
sm-g930 unable to restore stock
I have been playing around with root on my g930 (sprint on boost mobile) phone. After rooting I lost my phone activation. In an attempt to fix that I made things worse. Now it wont' boot into recovery mode. I followed the above steps but cannot flash BL or CSC, I get SW REV CHECK FAIL : [cache]Fused 5 > Binary 1 (or 5).
Any thoughts would be greatly appreciated
Nwarfield said:
I have been playing around with root on my g930 (sprint on boost mobile) phone. After rooting I lost my phone activation. In an attempt to fix that I made things worse. Now it wont' boot into recovery mode. I followed the above steps but cannot flash BL or CSC, I get SW REV CHECK FAIL : [cache]Fused 5 > Binary 1 (or 5).
Any thoughts would be greatly appreciated
Click to expand...
Click to collapse
Just Odin a firmware that is ver 5. Look at the firmware and go back 5 digits. Look for one with a 5 in that place.
HELP
enrique_b06 said:
I gonna help you if you've not fixed your phone.
First you need to download your last firmware (In this case for G930P -> QJ3 or QKx, x= 1 or 2, I don't remember the last number)
Download 7Zip and ODIN by Prince Comsey
Then go to this XDA post and download tar-Tool_Odin3-v3.10.7_by_mkh.mourad.zip
1. Install 7Zip
2. Extract files from your firmware (AP, BL, CP, CSC)
3. Right click on AP File (AP_G930PVPU5BXXX........MULTI_CERT_meta.tar.md5) and open with 7Zip
4. Extract the boot.img and recovery.img to Desktop (Make sure it ends with .img extension)
5. Extract the tar-Tool_Odin3.zip to Desktop
6. Copy boot.img and recovery.img to tar-Tool_Odin3 Folder
7. double-click on the "ImgToTar.MD5.bat" file. It should launch the tool for the conversion process.
8. Now you'll have boot.tar.md5 and recovery.tar.md5 in the tar-Tool_Odin3 Folder
9. Put your phone in Download Mode and launch ODIN by Prince Comsey, flash the files (recovery.tar.md5 to BL and boot.tar.md5 to AP)
10. Your phone will reboot so when the screen is turned off, immediately press the key combination again to access the download mode
11. Now you need to flash BL, CP and CSC with your original firmware files (BL_G930PVPU5BXXX........MULTI_CERT.tar.md5, CP_G930PVPU5BXXX.......MULTI_CERT.tar.md5 and CSC_SPT_G930PSPT5BXXX....MULTI_CERT.tar.md5)
12. Phone will reboot again, when the screen off, immediately press the key combination again to access the download mode
13. Now flash AP with original firmware file (AP_G930PVPU5BXXX.....MULTI_CERT_meta.tar.md5)
14. Now your phone will boot. Wipe cache and factory reset through Recovery Mode and now you can use your phone again.
I hope to help with your problem.
PS. XXX means compilation ID
Click to expand...
Click to collapse
the img to tar isnt working i double click and it opens command prompt and closes really fast no new files in folder just the ones I extracted
lvpre said:
Just Odin a firmware that is ver 5. Look at the firmware and go back 5 digits. Look for one with a 5 in that place.
Click to expand...
Click to collapse
I was able to flash the new OS after trying a ton that gave me the binary issue. It rebooted and just went back into a recovery loop and there is no recovery.
I tried to unpack my AP file and grab the boot and recovery images I exported them and converted successfully to .tar.md5 batch tool but they wont flash individually. is it because with the Snap dragon processor you have to flash the whole file at once? The only time i can successfully flash anything is when its the 100% firmware file in the form of HOME_CSCxxxxx in the AP slot in odin. ive tried some unlocked bootloader methods but have not been successful in getting the bootloader unlocked. Can I use an external SD card with a bootable recovery without rooting the device? Its secure boot and Rev check are active.
instrumentaly said:
I can help you if u still facing this problem
Click to expand...
Click to collapse
yes i need help i hacve discord it is @coooner#6051
plz get back to me
i bricked my s7 edge and i need start to finish help.
Hi everyone,
Ill try to keep it short and clear.
My galaxy S8 stopped booting after I turned it off.
Couldn't boot it anymore
Managed to get it into download modus
Tried to install TWRP to install a rom to solve it.
The TWRP installation failed..
Result:
Unplugged no charger:
The phone does nothing..
Tried:
Volume up + bixby + power
Volume down + bixby + power
Volume up + power
Volume down + power
Plugged in charger
The emergency blue screen pops up for 1/2 seconds then screen goas black.
Download mudus works for 1/2 seconds then screen also goas black.
The emergency screen often pops up by it self and then it goas black
Tried:
Buying a new charging cable
Tried to install the stock rom using odin v3.12
Even tho the screen goas black after going to download/odin, odin says it is connected.
Then odin gives this result:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> cache.img.lz4
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Frozen here:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img.lz4
The PDA file im using:
AP_G950FXXS4CSA4_CL14727133_QB21619376_REV00_user_low_ship_meta.tar.md5
Fault "<ID:0/003> boot.img.lz4" its caused by odin 3.12.
to solve it you have to use odin 3.13
Also make sure you have latest software especially bootloader.
good luck.
saszynski said:
Fault "<ID:0/003> boot.img.lz4" its caused by odin 3.12.
to solve it you have to use odin 3.13
Also make sure you have latest software especially bootloader.
good luck.
Click to expand...
Click to collapse
Hi thank you for your reply!
I've updated my odin to 3.13.1 now.
Altho I cant seem to get the phone in download mode anymore
The error I'm getting now is:
Bootloader exception.
I dont think I'm able to flash it still this way
If anyone have a solution for this I do appreciate it
Bootloader exception, try holding Power + Volume down + Bixty button for a long time 15-30 seconds until you get a light blue download screen.
benjamen50 said:
Bootloader exception, try holding Power + Volume down + Bixty button for a long time 15-30 seconds until you get a light blue download screen.
Click to expand...
Click to collapse
Thanks for helping Benjamen, I've tried this and the screen went black.
I've seen alot of people have this on galaxy s7 or older devices.
Their solution is to hold home button and then after that powe+ volume down + bixby
this will get them in download modus.
But galaxy s8 doesnt have a home button.
I've tried to flash the pit file using odin this made my phone reboot and it said "Panic kernel download mode"