ZTE Blade A0622 Unlock Bootloader - Blade General

OEM Unlock Bootloader & Install TWRP for ZTE Blade A0622 voyage​
Important! Be sure to perform the first step, in order to avoid problems in the future.
Step 1 - Enable OEM unlock and USB debugging
Go to Settings > About phone.
Click 7 time on Build number.
Going to Advanced settings, tape on Developer options.
Enable OEM Unlocking and USB debugging.
Step 2 - Download files, reboot phone in EDL mode, flash aboot
Download rar archive https://tinyurl.com/y43wbvgo
Unpack archive in any folder
Press on [0] Reboot to EDL.bat , and we go to EDL (9008)
Now we need to find out the COM port, go My Computer -
properties - device manager - Ports (COM & LPT). Remember this number.
Click on [1] Flash Aboot.bat (Right button mouse) - Rename, and change COM port to your number.
After save text file and run him.
Turn on your smartphone, you can go to recovery (Vol.Up+Power).
Now can see chinese engineering menu, press on next file [2] OEM Unlock.bat . After completing the unlock process phone reboot and we need reboot again in recovery mode (Vol.Up+Power).
Now re-entered the Chinese engineering menu, use last bat file
[3] Final Flash.bat . Upon completion, we will see TWRP. After completing step 3, your phone is unlocked!
Step 3 TWRP
Swipe on bottom bar (Do not click on read only). Download chinese rom https://tinyurl.com/yygsrs7e , and intall him. Now you can get root, use magisk v16.0 or magisk v.16.7 (not higher). For the version above, you need a custom kernel, not a stock.

hai, help me
step 2 ; find out the com port
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
rename to top or bottom

https://ibb. co/Vg34XTq

Hi man,step 2 on flash aboot bat is it rename on file or something else? Rename became what if my device is COM23
---------- Post added at 11:40 PM ---------- Previous post was at 11:16 PM ----------
lyoks said:
OEM Unlock Bootloader & Install TWRP for ZTE Blade A0622 voyage​
Important! Be sure to perform the first step, in order to avoid problems in the future.
Step 1 - Enable OEM unlock and USB debugging
Go to Settings > About phone.
Click 7 time on Build number.
Going to Advanced settings, tape on Developer options.
Enable OEM Unlocking and USB debugging.
Step 2 - Download files, reboot phone in EDL mode, flash aboot
Download rar archive https://tinyurl.com/y43wbvgo
Unpack archive in any folder
Press on [0] Reboot to EDL.bat , and we go to EDL (9008)
Now we need to find out the COM port, go My Computer -
properties - device manager - Ports (COM & LPT). Remember this number.
Click on [1] Flash Aboot.bat (Right button mouse) - Rename, and change COM port to your number.
After save text file and run him.
Turn on your smartphone, you can go to recovery (Vol.Up+Power).
Now can see chinese engineering menu, press on next file [2] OEM Unlock.bat . After completing the unlock process phone reboot and we need reboot again in recovery mode (Vol.Up+Power).
Now re-entered the Chinese engineering menu, use last bat file
[3] Final Flash.bat . Upon completion, we will see TWRP. After completing step 3, your phone is unlocked!
Step 3 TWRP
Swipe on bottom bar (Do not click on read only). Download chinese rom https://tinyurl.com/yygsrs7e , and intall him. Now you can get root, use magisk v16.0 or magisk v.16.7 (not higher). For the version above, you need a custom kernel, not a stock.
Click to expand...
Click to collapse
After click flash aboot
Why this happen?

Related

ClockworkMod recovery (CWM) and getting on ROOT ZTE BLADE G2V880H

Instructions for installing ClockworkMod Recovery (CWM) and obtaining ROOT on your smartphone ZTE V880H.
(1)Installing ClockworkMod recovery (CWM) on ZTE V880H
- Connect your phone to the computer. Debug mode (looking in Settings -> For developers). Ibid disable fast boot (remove the checkbox from step "Quick download").
-If previously the driver from the smartphone has not been established, it should automatically start installing them. Or set manually by downloading the file - http://yadi.sk/d/DfUBGhZD78bkk (in case of problems, try an alternate driver - https://yadi.sk/d/HXZozNan78bya).
- Download the SP_Flash_tool, https://yadi.sk/d/vN-rGYsB78cFqlocated in the folder and run it Flash_tool.exe. Click on «Scatter-loading» and select the file MT6589_Android_scatter_emmc.txt, which we take here.https://yadi.sk/d/6vF8waES78dZ2 Click on the line «RECOVERY» and specify the path to the file recovery.img, who download here.https://yadi.sk/d/y0zBrS-s78e_A Next, click on the line BOOTIMG and specify the path to the file boot.img, which swing here.https://yadi.sk/d/pFOAD7xp78fCW
-Turn off your smartphone, take out the battery, connect in this state to a computer.
- In Flash Tool click the Download button and wait for the appearance of the window with a green circle. The installation is completed ClockworkMod Recovery.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(2)Getting ROOT on ZTE V880H
-Download the file -> SuperSU-v1.25.zip,https://yadi.sk/d/svUKzViC78j2P throws in root SD-card.
-Boot into ClockworkMod Recovery (volume rocker up button and turn off at the same time on the smartphone).
-Select install zip from sdcard -> choose zip from sdcard -> SuperSU-v1.25.zip.
-Wait until the completion of the installation process and restart ROOT smartphone (reboot system now).
ali.jishan786 said:
Instructions for installing ClockworkMod Recovery (CWM) and obtaining ROOT on your smartphone ZTE V880H.
(1)Installing ClockworkMod recovery (CWM) on ZTE V880H
- Connect your phone to the computer. Debug mode (looking in Settings -> For developers). Ibid disable fast boot (remove the checkbox from step "Quick download").
-If previously the driver from the smartphone has not been established, it should automatically start installing them. Or set manually by downloading the file - http://yadi.sk/d/DfUBGhZD78bkk (in case of problems, try an alternate driver - https://yadi.sk/d/HXZozNan78bya).
- Download the SP_Flash_tool, https://yadi.sk/d/vN-rGYsB78cFqlocated in the folder and run it Flash_tool.exe. Click on «Scatter-loading» and select the file MT6589_Android_scatter_emmc.txt, which we take here.https://yadi.sk/d/6vF8waES78dZ2 Click on the line «RECOVERY» and specify the path to the file recovery.img, who download here.https://yadi.sk/d/y0zBrS-s78e_A Next, click on the line BOOTIMG and specify the path to the file boot.img, which swing here.https://yadi.sk/d/pFOAD7xp78fCW
-Turn off your smartphone, take out the battery, connect in this state to a computer.
- In Flash Tool click the Download button and wait for the appearance of the window with a green circle. The installation is completed ClockworkMod Recovery.
(2)Getting ROOT on ZTE V880H
-Download the file -> SuperSU-v1.25.zip,https://yadi.sk/d/svUKzViC78j2P throws in root SD-card.
-Boot into ClockworkMod Recovery (volume rocker up button and turn off at the same time on the smartphone).
-Select install zip from sdcard -> choose zip from sdcard -> SuperSU-v1.25.zip.
-Wait until the completion of the installation process and restart ROOT smartphone (reboot system now).
Click to expand...
Click to collapse
Use directly mobile uncle tool to flash recovery but first root mobile with framroot app.thanks for sharing recovery...
pratikmore said:
Use directly mobile uncle tool to flash recovery but first root mobile with framroot app.thanks for sharing recovery...
Click to expand...
Click to collapse
i also use this method...it was a more easy method.....but it is not easy 4 some people.
nothing happening after clicking download
hi, i followed your instruction but nothing is happening, nothing is being downloaded, what could be the reason. please help

[Guide] How to create/restore a full backup of your phone to your PC [Root Required]

Note to staff: I'm new to XDA, so I'm sorry if this guide is posted in the wrong place or if it's inadequate. Please PM me if there are problems with it.
Note to users: I am NOT responsible if the restore process damages your phone. You are doing this at your own risk. Be sure to follow the steps carefully.
In this guide, I will share the best method of backing up your phone to your PC.
Recently I flashed a stock firmware on my SM-J730F and debloated it. Somehow I managed to soft-brick the device after a few weeks and I had to re-flash the firmware, and debloat it all over again. I found out a good method of backing up my entire phone so that I don't have to do that again. I will share that method with you guys.
This works with any phone, not just the J7.
Requirements:
1. Any phone
2. PC
3. An USB cable
4. ADB - Download Here
5. Root Access - Guide on how to root SM-J730F here || Other Phones - If your device is rooted, continue. If not, please leave.
6. FlashFire App - Install Here
Instructions:
1. Have your USB cable near you;
2. Download FlashFire from the link above;
3. Enable USB Debugging from Settings -> Developer Options;
4. Download the ADB from the link above, and extract everything inside the archive to C:\ADB (create a new folder);
5. Connect your USB cable from your phone to your PC - if you get an access request on your phone from your PC's fingerprint, accept it;
6. Open a Command Prompt and type: cd C:\ADB
7. Type adb devices in the command prompt to confirm that it detects your phone; you should get something like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
8. Now open FlashFire on your phone and grant it root access;
9. Tap on the plus sign and tap on Backup:
10. Select Full - All Partitions:
11. On this screen, DO NOT select the partitions that have "(protected bootloader partition)" or "(protected partition)" under them; they might cause the restore process to be unstable:
(TIP: There are more partitions if you scroll down on the list of partitions. Just be careful not to select the protected one. Everything else, select.)
12. After that tap on the V button at the top right of the window, and now just scroll to the bottom of the page and tap on FLASH:
13. Your phone is going to reboot now. DO NOT intrerrupt this process, and DO NOT disconnect the USB cable.
14. Once your phone has rebooted, a list of files will start to load, and you will see FlashFire at the top of the screen. On the bottom, the last line should be this:
Start: adb backup go -f filename.zip
This means that FlashFire is waiting for your input from the Command Prompt on your PC.
15. If you see that line, then go on your PC, go into the Command Prompt and type the following command to start the backup process:
adb backup go -f backup.zip
16. Press Enter and the backup process will start on your phone. Wait until it is complete. Your phone will reboot when it's done.
And that's it!
You should have a Backup.zip file in your C:/ADB folder. The size of the file depends on how much data you have on your phone.
Congrats; You have created a full backup of your phone.
Below is a tutorial on how to restore the backup that you have just created.
1. Open ADB on your PC and verify if your device is detected, as I've explained above;
2. Open FlashFire, tap on the plus sign and tap on Restore:
3. On the window that opened select Restore from ADB:
4. Select all the partitions (except the protected partitions) (there are more if you scroll down), and then tap on the V sign at the top right:
5. Tap on the FLASH button and wait for your phone to reboot:
6. Once it's rebooted to that screen with two lines, you should see something like this:
7. Now type the following command into the Command Prompt on your PC:
adb push backup.zip /restore
8. Press Enter and wait for the restore process to finish. Your phone will reboot and hopefully everything is how it should have been when you backed up the phone.
And that's it! You're done restoring the backup.
I hope this guide has helped you; if it did hit the "Thanks!" button at the bottom right of this post, more guides about rooting the J7 and unbricking it available now..
And again, this is my first legit post on this site, so I'm sorry if something is wrong. Please leave constructive criticism, and don't be immature if you have a problem. Thanks
I tried backing my phone up and after step #13, nothing happened? Help please? It just rebooted.
hello i want to know that can i backup my phone (only rom and its update) without root if yes pls tell me...

Install TWRP Without Root. Xperia Z1 Lollipop 5.1.1

Fast go to the Setting/About phone then tap the "Build number" 5 time .
Then back now you show the "Developer options" Open it
then "On" it and on the "USB debugging" option .
Now Power Off your phone ,
Now Hold the 'Volume UP' button and connect with your pc.
Install ABD Driver on you pc.
If you don't have ADB Driver : www.mediafire.com/file/8p39tf9zudil916/adb-setup-1.4.3.exe
Download This File : www.mediafire.com/file/pvapp0t3oz2ty9m/Twrp.zip
Unzip The file , open folder , hold the "Shift Key" + Right Click !
Click "Open Commend windows here"
CMD commands :
fastboot devices
fastboot flash boot boot.img
fastboot reboot
Now press the Volume UP Button 10 Time..
Or, If you still have any problem check The Video : https://www.youtube.com/watch?v=qNbaHaBeZFo&feature=youtu.be
WoW You Have Done The work,:fingers-crossed: Enjoy IT..:good:
File Is Here !!!
If you don't have ADB Driver : www.mediafire.com/file/8p39tf9zudil916/adb-setup-1.4.3.exe
Download This TWRP File : www.mediafire.com/file/pvapp0t3oz2ty9m/Twrp.zip
I was under the impression that you cannot flash a kernel when the bootloader is locked?
Instead of making mirrors link the adb tools to its thread instead
[OFFICIAL][TOOL][WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3
https://forum.xda-developers.com/showthread.php?t=2588979
flash boot
emon415 said:
Fast go to the Setting/About phone then tap the "Build number" 5 time .
Then back now you show the "Developer options" Open it
then "On" it and on the "USB debugging" option .
Now Power Off your phone ,
Now Hold the 'Volume UP' button and connect with your pc.
Install ABD Driver on you pc.
If you don't have ADB Driver : www.mediafire.com/file/8p39tf9zudil916/adb-setup-1.4.3.exe
Download This File : www.mediafire.com/file/pvapp0t3oz2ty9m/Twrp.zip
Unzip The file , open folder , hold the "Shift Key" + Right Click !
Click "Open Commend windows here"
CMD commands :
fastboot devices
fastboot flash boot boot.img
fastboot reboot
Now press the Volume UP Button 10 Time..
Or, If you still have any problem check The Video : https://www.youtube.com/watch?v=qNbaHaBeZFo&feature=youtu.be
WoW You Have Done The work,:fingers-crossed: Enjoy IT..:good:
Click to expand...
Click to collapse
Hi i think i have a problem with the guide as you said i installed adb drviers and i opend cmd in the following location but when i turn my phone off then holding the volume up button and connect it to pc i hear that phone is connected and I see a blue light in notification light as well but i cant use the commands cause it wont show any device is connected
(Im already in dev mode and debuging usb is on)
thanks in advanced
HELP!installed driver! fastboot mode not work!I tried almost everything!
there is twrp 2.8.6.0 I want to update 3.3.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

MIUI Official V11.0.3.0 Global Download and Install (fastboot and update)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Method 1: Local Update
Note
You can upgrade your phone by Local Update method without unlocking your phone. The method suits for the situations listed below for sure:
Update to Global Stable ROM from Global Stable ROM, Update to Global Beta ROM from Global Beta ROM, Update to Global Beta ROM from Global Stable ROM and vice versa.
If you encounter the issue that the reboot page keep loading for a long time after flashing, you can choose to wipe all data via entering Recovery Mode.
You can turn off your device and then hold both Volume+ button and Power button at the same time to enter Recovery Mode.
STEP 1
Download the latest MIUI V11.0.3.0.PCAMIXM ROM file Click here to download
There is no need to do it again if you’ve already downloaded the latest ROM file.
STEP 2
Connect your device to the Windows PC/laptop via a micro USB cable, and copy the ROM file downloaded in Step 1 into the folder ‘downloaded_rom’ in the internal storage of your device.
STEP 3
Launch ‘Settings’ app on your device, select ‘About phone’, click ‘System update’, then press ‘three dots’ icon at the top-right corner, and select ‘choose update package’ to enter.
Choose the ROM file you’ve put in ‘downloaded_rom’ in Step 2.
STEP 4
After choosing the right ROM file, your device will begin upgrading.
Your device should automatically boot to the new version when the update is completed.
Method 2: Fastboot Update
This method requires the unlocked bootloader.
In mi6 there is no waiting time to unlock the boot(STEP 1), at least on my device.
Note
A Windows PC/laptop will be needed for the following steps. Make sure that your device is fully charged or has enough power for this process.
This guide will help you update your device to the latest MIUI ROM version.
All user data will be purged in this process. Please back up your data and think twice before proceeding.
STEP 1
Download MIUI ROM Flashing Tool (Size: 46 MB).
Devices marked with locked. If your device is locked, please click here to unlock it first.
If your device is unlocked, please just follow the following tutorial to complete the ROM flashing.
STEP 2
Select the right MIUI ROM version for your phone from the listed below, and download the corresponding package file.
Xiaomi Mi 6 Latest MIUI Official V11.0.3.0 Fastboot File Download
STEP 3
Turn off the device. Press the Volume– key and the Power button at the same time to enter Fastboot mode. Then connect the device to the Windows PC/laptop via a micro USB cable
STEP 4
Double click on the downloaded ROM file to decompress it.
Open the file folder for the decompressed ROM pack, and copy its path on the computer.
STEP 5
Decompress the MIUI ROM flashing tool downloaded in Step 1, and double click on it to install (if there is security warning, select 'Run').
After installation is completed, open MiFlash.exe and paste into the address bar the ROM file folder path copied in the last step.
Click on the first button (circled out in yellow) to Refresh, and MiFlash should automatically recognize the device.
Then click the second button (circled out in red) to flash the ROM file to the device.
STEP 6
Wait until the progress bar inside MiFlash turns fully green, which means the ROM has been successfully installed. Then your device should automatically boot to the new version.
If the flashing guide could not help you, please download Mi PC Suite here
(After Mi PC Suite is installed, make sure that your phone is in fastboot mode, connect your phone to a computer, and select the correct ROM file to flash)
Hope it helps the newbies, thanks.
Credits for Xiaomi Mi Community
This version works on redmi k20 mobile
This version works on redmi k20 mobile

[Root Guide] INSTALL ROOT / WITHOUT RECOVERY / ADB-FASTBOOT / MAGISK

Hello, first of all I apologize for my English if you don't understand me somewhere, I'm learning English. Greetings from Peru.
Files and programs you need to download​THIS PROCESS WORKS WITH ALMOST ALL DEVICES, ONLY IF THEY HAVE THE BOOTLOADER CORRECTLY UNLOCKED WITHOUT THE NEED OF A TWRP.
In the computer​1- Lenovo Rescue and Smart Assistant, will help you in 2 things: In case your device is frozen or in a loop, there you can recover it and right there you can find and download the ROM of your device for free.
As you can see in this image my device is already selected and the ROM is already downloaded (just follow the steps and your device will be fine again)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here you will find the ROM
as you can see, location, folder and files of the ROM (it is necessary that you know where it is since you will need some files later)
2-You need to have ADB/FASTBOOT installed to be able to install the ROOT (remember that this is the safe way, there is no risk of your device freezing or in a loop, but everything is possible).
Link : https://forum.xda-developers.com/t/...vers-15-seconds-adb-installer-v1-4-3.2588979/
on device​1- First of all, you have to have the bootloader unlocked, here I leave the guide since it is somewhat long to read
Link : https://www.mobilewithdrivers.com/download/unlock-bootloader/lenovo-tab-m10-fhd-plus-tb-x606f
2- After unlocking the bootloader, you have to have Magisk.apk installed on your device
Link : https://github.com/topjohnwu/Magisk/releases
3- After installing Magisk, on the main screen you have to see if Ramdisk is "yes" or "no".
It says "si" because my native language is Spanish.
4- Go back to the computer and in the ROM folder you have to find the file "boot.img" and copy it to your device
5- within Magisk where it says "install", they give it to install and something similar to this will come out:
6- They only give the following next "siguiente " and select the option of Select file "seleccionar y parchar un archivo" (I repeat again ignore if it comes out in Spanish, you in English)
7- from there the explorer will open and they will look for where they copied the "boot.img" and select it.
Once the selector is given to start or let's start "comencemos"
the process has to be something similar to the image that I will post below, you can several certain lines but at the end it has to say "done!" without any error.
8- Now to finish the process on your device, copy the file that appears in your magisk "the patched file". Copy and paste it into the ADB/FASTBOOT folder
we return to the computer​
1- First of all, you have to enable "usb debugging" on your device
Link : https://www.embarcadero.com/starthe...bling_usb_debugging_on_an_android_device.html
2- Now go to your ADB/FASTBOOT folder and in a blank part open "powershell",
Now go to your ADB/FASTBOOT folder and in a blank part open "powershell" .
Holding SHIFT and right clicking open POWERSHELL
now they write "cmd" without quotes so that inside PowerShell you can use it as cmd
3- Here I will explain it in a long but correct way without errors, do not turn off the computer and leave it on since you will write an ADB command to order the device to enter Fastboot mode.
By typing "adb devices" you will find out if the drivers are correctly installed and your computer, cmd and adb/fastboot should recognize it.
now type "adb reboot-bootloader" , this will command your device to reboot into "bootloader" mode
Now this part is important that you pay attention as some people make mistakes.
Once your device has rebooted and you get to the "fastboot mode" screen, you will type the following in powershell :
fastboot devices
If the following appears, it is because your computer detects your device in fastboot mode.
Now comes almost the end of this guide, to install root do the following.
To root your device they usually tell you to type the following "fastboot flash boot boot.img", but sometimes there are errors.
what you will do is the following :
once you have written the following
you are going to drag the "magisk patches" file to the poweshell
and you will have to leave the path where the saved file is (this is a safe way so that you do not get errors)
now you just hit "enter" and it will be installed on your device
Now to finish, restart the device, install "root checker" and you will realize that you have it activated.
attached image of my device "Tab M10 FHD 2nd TB-x606x" with the latest ROM installed, having ROOT, MAGISK and modules installed
THIS PROCESS WORKS WITH ALMOST ALL DEVICES, ONLY IF THEY HAVE THE BOOTLOADER CORRECTLY UNLOCKED WITHOUT THE NEED OF A TWRP.
If the guide helped you, please comment, if it didn't work for you, please comment as I will try to help you solve the problem.
Currently I will not be contributing more to the community since I do not have my own computer, the computer I use will only be there for a few days, after that they will take it away.
when I have a new computer, I will be sharing RecoveryTWRP for some devices modified by me or some other help that I am able to carry out and finish as a project.
I thank XDA for creating this space to help, guide and for everyone to learn in the process.
I send you greetings from Peru.
Nice, thank you very much, sir.

Categories

Resources