Install TWRP Without Root. Xperia Z1 Lollipop 5.1.1 - Xperia Z1 General

Fast go to the Setting/About phone then tap the "Build number" 5 time .
Then back now you show the "Developer options" Open it
then "On" it and on the "USB debugging" option .
Now Power Off your phone ,
Now Hold the 'Volume UP' button and connect with your pc.
Install ABD Driver on you pc.
If you don't have ADB Driver : www.mediafire.com/file/8p39tf9zudil916/adb-setup-1.4.3.exe
Download This File : www.mediafire.com/file/pvapp0t3oz2ty9m/Twrp.zip
Unzip The file , open folder , hold the "Shift Key" + Right Click !
Click "Open Commend windows here"
CMD commands :
fastboot devices
fastboot flash boot boot.img
fastboot reboot
Now press the Volume UP Button 10 Time..
Or, If you still have any problem check The Video : https://www.youtube.com/watch?v=qNbaHaBeZFo&feature=youtu.be
WoW You Have Done The work,:fingers-crossed: Enjoy IT..:good:

File Is Here !!!
If you don't have ADB Driver : www.mediafire.com/file/8p39tf9zudil916/adb-setup-1.4.3.exe
Download This TWRP File : www.mediafire.com/file/pvapp0t3oz2ty9m/Twrp.zip

I was under the impression that you cannot flash a kernel when the bootloader is locked?
Instead of making mirrors link the adb tools to its thread instead
[OFFICIAL][TOOL][WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3
https://forum.xda-developers.com/showthread.php?t=2588979

flash boot
emon415 said:
Fast go to the Setting/About phone then tap the "Build number" 5 time .
Then back now you show the "Developer options" Open it
then "On" it and on the "USB debugging" option .
Now Power Off your phone ,
Now Hold the 'Volume UP' button and connect with your pc.
Install ABD Driver on you pc.
If you don't have ADB Driver : www.mediafire.com/file/8p39tf9zudil916/adb-setup-1.4.3.exe
Download This File : www.mediafire.com/file/pvapp0t3oz2ty9m/Twrp.zip
Unzip The file , open folder , hold the "Shift Key" + Right Click !
Click "Open Commend windows here"
CMD commands :
fastboot devices
fastboot flash boot boot.img
fastboot reboot
Now press the Volume UP Button 10 Time..
Or, If you still have any problem check The Video : https://www.youtube.com/watch?v=qNbaHaBeZFo&feature=youtu.be
WoW You Have Done The work,:fingers-crossed: Enjoy IT..:good:
Click to expand...
Click to collapse
Hi i think i have a problem with the guide as you said i installed adb drviers and i opend cmd in the following location but when i turn my phone off then holding the volume up button and connect it to pc i hear that phone is connected and I see a blue light in notification light as well but i cant use the commands cause it wont show any device is connected
(Im already in dev mode and debuging usb is on)
thanks in advanced

HELP!installed driver! fastboot mode not work!I tried almost everything!
there is twrp 2.8.6.0 I want to update 3.3.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Related

[Solved By the Genius (b63)] my Kindle Stuck At logo

Hi
I have Kindle Fire 6.2.2
and I tried to do what wrote here
http://forum.xda-developers.com/showthread.php?t=1369040
install the Root and everything goes well
then started to do what wrote Up
I came to replacy "libandroid_runtime.so", then the scren just frozen
waited around 5 min then turn it off
when I turn it on again, stuck at the logo and never cross it
I'm very amatur about fire, so please anyone help me solve this problem?
would try to follow this thread:
http://forum.xda-developers.com/showthread.php?t=1455501
basically install fff/twrp and flash one of the prerooted stock roms:
http://forum.xda-developers.com/showthread.php?t=1451747
ok, thanks of course
but let me tell you I'm a very stubid person
you know? the root couldnt do it without the video on Youtube
so can you please give me the steps one by one, like how can i install twrp??
i relly don't know that much, but i would be pleased if you help me, thank you anyway
1. download kfu http://random.kennocha.com/kindle/utility/Kindle_Fire_Utility_v0.9.2.zip
2. extract to c:\ and rename "kindle fire utility" to "kfu" that it is "c:\fku"
3. download http://techerrata.com/file/twrp2/twrp-blaze-2.0.0RC0.img
4. move it to c:\kfu\tools"
5. open a (elevated command prompt) and enter "cd c:\kfu\tools"
6. enter "fastboot -i 0x1949 boot twrp-blaze-2.0.0RC0.img" - leave command prompt open - need it later
7. tap reboot on the kf - it should reboot to twrp
8. download http://www.multiupload.com/VUAPS24569
9. rename downloaded file to "update.zip"
10. copy update.zip to sdcard
11. in twrp on the kf tap install - select update.zip and install
12. if it finished tap clear dalvik/cache on the same site
13. in your command prompt type: adb shell "idme bootmode 4000"
14. and then type: adb reboot
that's it - if you have got no errors to this point it should reboot - it takes some time for the first boot
good luck !
Thank You Again I Know I'm like Pain in the Ass, but you are amazing.
So, Now I'm at TWR, I did All the 10 steps successfully but still My PC couldn't find My Kindle Fire So I can copy update.zip to sdcard
Is there A Soultion you have for this problem?
becuase I think my problem will be kind of easy after this step, right?
Of Course many thanks to you, relly man you are a lifesaver
I Love You
PS : when i adapt the kf with my pc and go to Devises and printers
it goes under "unspecified" and the name "Unknown Device"
not like the others the name is "kindle fire".
I'don't know relly what the mistake that I made but I'm sure I did one because
before the name was Kindle fire not unknown
and thanks again anda again and again
it's a driver issue right now
- right click the unknown device and select update driver
- select don't search and have disk
- direct it to c:\kfu\drivers\kindle
if your on win7 this might be helpful too:
http://forum.xda-developers.com/showpost.php?p=21720811&postcount=41
Sorry for being late, but i had a problem with the internet conection
So...
My PC OS is Windows 7 64-bit
i did what wrote on this: http://forum.xda-developers.com/showpost.php?p=21720811&postcount=41
but it dosen't really helpful, in fact it was somehow, let me tell you what i got now
Now, My Pc Recognized my Kindle, and when I go to devices and printers I had this "http://i.imgur.com/q8SCu.png"
but when I go to My Computer, I found nothing !!
there is no Driver for the device.
So... is there any solution to this problem?
when you are in twrp you should tap on mount and mount the sdcard
then it should show up on your computer
you should use device manager to look at the devices and see what's going on
what i see on your picture is not the device manager
Ok, this is photo from my device manger
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
about the twrp i don't have any option
just the the yellow triangle and wrote down "Press power button for recovery"
of course i try to hold on the power button to recovery and nothing happen
also try to press the power button repeatedly but nothing happen
try to issue:
fastboot -i 0x1949 oem idme bootmode 5001
if the command says <waiting for device> then power it down by holding pwr ~20sec - unplug and replug - but don't power it on - does it by itself
the kf should pickup the command at some point and the command finishes
No Way!!
Now I'm really like this
really I don't think that my kindle will be back after what I did
but you man?? Unbelievable, you are amazing, you are Genius
Thank you so much, so much.
Now People I have My Kindle Back, wow!
That's really Unbelievable.
and you sir, you are fantastic!
thank you again, and good night "it's night where I live"

[Q] NANANDROID not apply from sd card.

Hello everyone!
i do the following step how to install Nanandroid on my HTC Touch HD.
1. Flash the latest HardSPL from OliNex
2. Extract the 'adb files & fastboot.exe' files to a folder
3. Format the microSD card fully as FAT32
4. Copy the 'BlacIMG.NBH' file and your selected ROM (zip) you wish to use to the root of the microSD
5. Boot in TriColour mode (Power button and Volume down button)
6. Whilst in the TriColour mode, connect the Blackstone to a USB port ('Serial' should now say 'USB')
7. Run 'BlackstoneRUUAdvanced' and select the 'Task 29' which is full wipe of the Blackstone
8. Once completed, insert the microSD card and reboot into the TriColour mode again
9. The Blackstone will auto-flash-install (after key confirmation) the 'BlacIMG.NBH' on the microSD card
10. The 'BlacIMG.NBH' must NOT be flashed via Windows using the RUU tool (it will only fail)
11. Once flashed with the 'BlacIMG.NBH' it will reboot to a new Fastboot screen (blue background)
12. After a short time the Blackstone in Fastboot mode with enter a USB connect ready state
13. Now connect the Blackstone to your Windows OS and open a CLi/Command prompt
14. Within CLi go to the directory where you place the 'adb files & fastboot.exe' files (from step 2)
15. Type: fastboot flash recovery recovery.img (this will flash install the custom CWR)
16. Then type: fastboot boot recovery.img (this will reboot your Blackstone into CWR)
and it's appear :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
then i chose apply from sd card. but it's stuck.!!!!!
would you help me, please!!! :crying:
thanks in advance.
Why did you make a new thread for this? God, for some reason there is a thread for the ROM already...
Anyways, the phone is not stuck.
When you get into recovery press vol up, down, and up again, as it says on the instructions. Please read before asking.
unlock the power botton
mfsr98 said:
Why did you make a new thread for this? God, for some reason there is a thread for the ROM already...
Anyways, the phone is not stuck.
When you get into recovery press vol up, down, and up again, as it says on the instructions. Please read before asking.
Click to expand...
Click to collapse
dude, try press up, down and up
strictly abide these three steps, you can unlock the power botton

[ROOT] Vonino Spirit S, Firmware, FlashTool, Khmer Unicode

I bought this tablet from Romania. I search and found how to root.
This is how I have done. I just want to share with you guys.
Note: I am not responsible what happen to your device.
My device spec:
http://www.vonino.ro/spirit_s
Please report me if the link download is dead...
Please Dont mirror Link, report ME
**********************************************************
******How to root******
1- Download TPSparkyRoot-4.1.1Root.rar and extract to directory. Here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2- Enable USB debug Mode.
Go to Setting => Developer Option Tick USB Debugging (Press OK)
3- Install Driver for device (Make sure you can run adb command) Download or you can use Google USB device (tested).
4- Connect your device in USB (not host)
5- Double on TPSparkyRoot.bat
6- Press any key and wait...till device restart complete (1/3) device will reboot automatically
7- Press any key and wait...till device restart complete (2/3) device will reboot automatically
8- Press any key and wait...till device restart complete (3/3) device will reboot automatically
Congrat!!!!1 Your device is rooted
Proof: TitaniumBackup
******End of How to root******
******Upgrade or Restore Back if your device ( ******
1- Download FlashToo from this site Download and Extract
Download system.img from this site Download
2- Install Driver
You will driver in RKBatchTool folder (you extracted).
3- Turn off device, Press only Volume DOWN button (-) for a while (2 or 4 seconds), Device screen is still black, Release the button
4- Plug USB in Host port
5- Connect to PC
6- you will some thing change like you see in this video. I will make full image again.
******End of Restore back******
******Add Khmer Unicode******
1- After your device is rooted, you can fully control your system folder.
2- Download this font Download
and Extract in folder, you will find 4 fonts.
3- Mount your system as R/W by using Root Explorer
4- Copy and paste /system/fonts
5- Change permission -rw-r--r--
6- Reboot
******End----Add Khmer Unicode******
******Download******
TPSparkyRoot-4.1.1Root.rar
Adb Driver
Vonino_Spirit_S_4.1-2012-8-28.img
Font Khmer
******End----Download Section******
I cannot find any recovery tool for this device.
I am planning port ClockRecoveryMod for this device.
Thanks....Hope you enjoy guysss...
Thanks. It works with Vonino Primus 94HD as well.
Thx ! Working with Primus QS
Neyder said:
Thx ! Working with Primus QS
Click to expand...
Click to collapse
Is it posibile to use this method tot root Vonino Spirit QS? This tablet has a 1,2 quad-core MTK, Android 4.2.1. I will apreciate yours aswers.

Phone not detecting in fastboot mode ?? Try this method

Procedure for making your computer ready for executing fastboot commands
Link for vedio demonstration : https://youtu.be/1amTkFxlQUY
2nd part of the vedio instruct how to install adb drivers
1 ) Install ADB drivers in windows using below link
https://drive.google.com/file/d/1lZ2pZLne6TV9YJLmS9P_EAteuAZn_BPs/view?usp=drivesdk
2) Download platform tools link :
https://drive.google.com/file/d/1HUAUNJnlOKUJCxSqVxNVRagV4XBGe-2Q/view?usp=drivesdk
2 ) extract it
‎
‎3) whenever you want use fastboot commands
Goto platform tools and paste required file in platform tools folder
4) then from platform tools folder open Power shell or command prompt using (shift + right click ) in empty space
Then it will open command promt then you can execute fastboot commands
5 ) once check whether you installed ADB drivers perfectly or not by using this command
adb devices
If it does shows any devices
Then follow below link
https://youtu.be/LbAq6d2Du0U
That's it now your computer can be used for executing fastboot commands
There have some easy steps for solve it....
1) download platform-tools_r33.0.3-windows and Fastboot Driver go through the link
2) Type on Loaction url place "cmd" and hit enter
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3) It will open same folder through CMD
4) type "adb devices"
Note! make sure that time your phone in user mode not fastboot mode
5) Then it will show your phone in cmd (Its not showing download and install adb drivers / MTP drivers and usb drivers to your PC links are below)
Xiaomi USB Driver Windows 32-bit/64-bit Download
Download the latest Xiaomi USB Driver for Windows from here. We have shared the official Xiaomi USB Driver for Windows to download.
mydrivers.online
Xiaomi ADB Driver [Download] for Windows 32-bit/64-bit
Download the latest and official Xiaomi ADB Driver for Windows 32-bit and 64-bit versions. We shared the official Xiaomi ADB Driver.
mydrivers.online
Xiaomi MTP Driver Download free Latest for Windows
Download the latest Xiaomi MTP Driver for Windows from here. The updated Xiaomi MTP Driver is provided here to download free for OS.
mydrivers.online
6) after that you confirm it using device manager
7) Then after go to cmd again type "adb reboot fastboot"
8) It will reboot to fastboot mode
9) Type in cmd "fastboot devices" (adb command only work in usermode)
10) Then it will show your phone in cmd (Its not showing download Fastboot Driver above I mentioned)
%% How to install FASTBOOT drivers %%
1) go to computer management
2) find android devie
3) click left click and click update driver
4) Brows in my computer > let me pick drivers > Have Disk >Browse> (select file in fastboot folder "android_winusb" andd hit enter )
Then it will show your phone in cmd fastboot mode
Enjoy it!!
LINK -- https://mega.nz/folder/7QMR0AJS#oS8CHzrAsY3Y0kl9ABBZrQ
more info refer - https://xiaomi.eu/community/threads/fastboot-mode-device-not-listed-resolved.63817/

Google Nexus 4 MTP mode not recognized by Windows 10 (Manual Fix)

Hello N4 Owners/Users.​
lately I've been working on IOS & iCloud Activation Lock Security, which is a Job I honestly do not wish you have, because is not a great business at all but, going more deep in this post I'm glad to post it because I've been trying to send iCloud Accounts stored on a PDF at my Nexus 4, a device that I've purchased last month at eBay and is incredible how this device with Unofficial ports runs faster and without bugs, of course using PURE Nexus ROM.
first things first, I must specify that I was sideloading ZIP's, APK, ROMS through ADB SIDELOAD commands, so that the first sign of a properly working USB Port, I didn't noticed yet that I was unable to set up my device as MTP and transfer photos or WhatsApp Folder to my PC.
2 weeks later I've noticed that MTP was not working, even changing "Charge Option" to "Transfer Files" so I just put my knowledge on going, the first thing was download the USB driver at Google SDK webpage, which delivers USB Drivers apart instead with the whole SDK, I've just proceed to download it, I've installed it and for my surprise the MTP was still not working...
what do now ?​
Steps:​
1. Download the proper driver designed by google
Google Nexus 4 Drivers.
2. Make sure your PC is not on secure boot, for this you should reboot your PC and enter to BIOS Setup to make sure secure boot is not activated, if it is, please turn it off.
3. reboot again and let your PC boot, you may notice that the boot sequence UI display a little messed up, but is normal.
4. go to UWP Settings and Select "UPDATE & SECURITY"> "RECOVERY"> "Advance startup" and hit at "Restart Now"
5. your PC is going to restart again & you'll see a menu of likely 10 or 9 options, we need deactivate the option 7.
7). Disable Driver Signature Enforcement.
Click to expand...
Click to collapse
doing this your PC will restart again or maybe it just boot the Windows or UEFI Logo.
6. Find & Run CMD as administrator and execute the code below.
bcdedit /set TESTSIGNING ON
Click to expand...
Click to collapse
Restart your PC Again.
wait, you need the MTP or really are you craying for such restarts?
okay, that's what I though.
7. Disable ADB on your device and connect it to PC, Open device manager and look for "Android ADB Interface"
8. Right Click on the device and select "Update driver", Select "Browse My Computer for driver software"
9. locate drivers folder you've already downloaded following this guide and after that, you must have this screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Select "Let me pick from a list of available drivers on my computer"
If are 2 MTP entries, install them and reboot your PC, and that's all people, MTP working.
Now go back at CMD as Administrator and set this
bcdedit /set TESTSIGNING OFF
Click to expand...
Click to collapse
Now Restart and enter at BIOS, restore secure boot, done!
Hit "thanks" button if this helped you recovering MTP Access and your PC at your N4.

Categories

Resources