Database Users

[Q] NANANDROID not apply from sd card.

Hello everyone!
i do the following step how to install Nanandroid on my HTC Touch HD.
1. Flash the latest HardSPL from OliNex
2. Extract the 'adb files & fastboot.exe' files to a folder
3. Format the microSD card fully as FAT32
4. Copy the 'BlacIMG.NBH' file and your selected ROM (zip) you wish to use to the root of the microSD
5. Boot in TriColour mode (Power button and Volume down button)
6. Whilst in the TriColour mode, connect the Blackstone to a USB port ('Serial' should now say 'USB')
7. Run 'BlackstoneRUUAdvanced' and select the 'Task 29' which is full wipe of the Blackstone
8. Once completed, insert the microSD card and reboot into the TriColour mode again
9. The Blackstone will auto-flash-install (after key confirmation) the 'BlacIMG.NBH' on the microSD card
10. The 'BlacIMG.NBH' must NOT be flashed via Windows using the RUU tool (it will only fail)
11. Once flashed with the 'BlacIMG.NBH' it will reboot to a new Fastboot screen (blue background)
12. After a short time the Blackstone in Fastboot mode with enter a USB connect ready state
13. Now connect the Blackstone to your Windows OS and open a CLi/Command prompt
14. Within CLi go to the directory where you place the 'adb files & fastboot.exe' files (from step 2)
15. Type: fastboot flash recovery recovery.img (this will flash install the custom CWR)
16. Then type: fastboot boot recovery.img (this will reboot your Blackstone into CWR)
and it's appear :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
then i chose apply from sd card. but it's stuck.!!!!!
would you help me, please!!! :crying:
thanks in advance.

Why did you make a new thread for this? God, for some reason there is a thread for the ROM already...
Anyways, the phone is not stuck.
When you get into recovery press vol up, down, and up again, as it says on the instructions. Please read before asking.

unlock the power botton
mfsr98 said:
Why did you make a new thread for this? God, for some reason there is a thread for the ROM already...
Anyways, the phone is not stuck.
When you get into recovery press vol up, down, and up again, as it says on the instructions. Please read before asking.
Click to expand...
Click to collapse
dude, try press up, down and up
strictly abide these three steps, you can unlock the power botton

New Guide to go back to stock KDZ based

Ok. guys follow these steps and do not miss any
Download the files 1. here & 2. here
Credits to hyelton and somboons
1. Install R&D tool B2CAppSetup.exe (close it if it opens) also install the LG mobile drivers.
2. Delete the existing files and folders in C:\ProgramData\LGMOBILEAX
Copy over the files from downloaded LGMOBILEAX to same directory in C:\ProgramData\LGMOBILEAX
(It is hidden so make sure to enable hidden items in windows)
3. Take ownership of hosts file located in C:\Windows\System32\drivers\etc\
Google it if you don't know.
4. Run http file in shttps folder (As Administrator)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Run this
6. Click Ok
7. Click Ok again
8. Take a look at system tray
9. Click the three window icon and turn it on
10. Click ok
11. Accept UAC prompt to run the flashtool as administrator.
12. Your small server should look like the one in the window to left and follow the steps in picture after selecting the appropriate kdz file
13. Great success.
14. If you had not wiped data to "clean install a new rom" on Philz touch recovery, you have to factory reset your phone after flashing stock firmware or else it will go in bootloop.
Important:
1. You need to take control of hosts file (Google the steps if you are noob)
2. Copy over files and folders from downloaded LGMOBILEAX folder. It is hidden so make sure to enable hidden items in windows.
3. Follow the above guide step by step. You miss 1 step and it will not work.
4. Hosts file will revert back to default after the flash tool is closed.

[Guide] Mount your MTP device as MSC (SD Card)

First sorry for English'm still training
This tutorial aims to let your device (mtp) acting as a (msc)
What you'll need:
A Windows computer
CM11 or AOSP 4.4.x Based (not Tested in cm12 or AOSP 5.0.x)
Root
Application: Xperia SDCARD Mounter v6 or higher: https://play.google.com/store/apps/details?id=com.doomlord.xperiasdcardmounter (paid)
Ext2Fsd (to recognize ext3 / 4 partition of your device): http://sourceforge.net/projects/ext2fsd/files/latest/download?source=files (free for windows)
SELinux Mode Change: https://play.google.com/store/apps/details?id=com.mrbimc.selinux (free)
1- Download install on your computer the Ext2Fsd normally and check all the options available in it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2- Reboot your phone and do not open any application outside the listed here (this may result in it using a file that you move / delete / rename / copy)
3- Download and install SELinux Mode Change, give the permissions of superuser and activate the permissive mode.
4- Download and install the Xperia SDCARD Mounter, give the permissions for superuser
5- In Xperia SDCARD Mounter select the "Yes this is correct!" give the permissions for superuser
6- A message will appear saying that BusyBox is unavailable, simply press "OK" and close the application.
7- Reopen the Xperia application SDCARD Mounter and Select the "mount internal storage"
8. On your computer: Open Windows Explorer and browse to a removable disk with the approximate total capacity of 55GB
9. Navigate to the following directory: Media> 0
10- You will now be able to manage your files as an SD card
VERY IMPORTANT
NEVER FORGET TO EJECT YOUR DEVICE AFTER USE, AS IT MAY CAUSE CORRUPT FILE
And return to MTP mode - Settings > Storage > Menu (3 dots on right superior) > computer usb connection > MTP mode
Or In Xperia SDCARD Mounter > Media Transfer
Tested on a OnePlus One Chinese
Rom: CM 11 Nightly 05.01.2015
Kernel: AK 0.87
This is my first tutorial, I hope it helped, if so do not forget the like :good:

Thanks, I will give it a try in cm12 !

[TUTORIAL][WINDOWS]Solution: File Transfer in TWRP Recovery[17-08-2015]

Tutorial: How to transfer files to/from our Moto G while in TWRP recovery​
This tutorial have been tested in 7, 8, 8.1 and 10 Windows versions. It can work with other devices beside Moto G.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sometimes we need to transfer files to our device while we are in recovery mode. When we forget to copy the zip we were going to flash, when we are installing a
GPE based ROM (we must format /data and erase all files), to transfer a backup... ect. In many cases we need this function.
The purpose of this tutorial is to make our PC succesfully recognize our Moto G as a storage device being in TWRP recovery.
Many users have reported that their devices are not being recognized.​
Requirements:
-Have installe the last TWRP recovery version.
-Have installed ADB drivers in PC. You can try this ones Universal ADB Drivers or Motorola Mobile Drivers 64 bits
-USB data cable.
-PC runnig Windows 7, 8, 8.1 or 10 (can work with older versions).​Steps: Sorry for spanish images, if you can provide me english captures would be great.
1) Boot into recovery mode and connect to PC with USB data cable.
2) Being completely sure your device is not being recognized, otherwise this tutorial will be totally useless to you.
3) Open Control Panel and click on Hardware and Sound
4) Go to Device Manager.
5) Look for 'Android Device' or 'Android Phone' or any related name, open the list, rigth-click on the device and click on 'Update driver software'.
6) Now click on the second option.
7) Now click on the option below:
8) Make sure 'ADB composite device' is there and click next.
9) Once this is donde, reboot your PC and it will be in capacity to recognize your device as a storage device while you are in TWRP recovery. We can freely transfer files.​---------------------------------------------------
Last Update: 17-07-2015

Reserved

Thanks

Samsung Galaxy J7 Refine - Root with Magisk - J737p - J737PVPS2ASA1 - Android 8.0

Credit goes to:
 @☆KØŁØЯΛĐØ☆ providing some of the device files + the original guide for another j737p variant this was modified from + testing/porting aforementioned root method
 @topjohnwu for Magisk as always !!!
The link below is to the thread for the guide to root the j737p J737PVPU1ARG3 variant in which I modified this guide from.
https://forum.xda-developers.com/galaxy-j7/development/twrp-root-galaxy-j7-refine-8-0-boost-t3916575
------------------------------------------
Download all files needed as well as this guide saved to a .txt document here:
https://www.mediafire.com/download/uckb1mji1r01f9m
------------------------------------------
Read all before just winging it and follow directions with precision !!!
( Run all progams by right click - Run as administrator )
Step 1
Unzip - Odin3_v3.13.1 ( non-patched ).zip + Install the samsung USB drivers via SAMSUNG_USB_Driver_for_Mobile_Phones.exe
YOU MUST PAY ATTENTION TO THE FOLLOWING
- In the Step_1.zip you extracted, load up Odin_v13.1 (non-patched)
- Load only the BL/AP/CP files from your stock firmware into Odin
- As soon as the flashing process ends, you must reboot quickly back into Download Mode. You have to be quick. If you allow the device to begin booting up, it makes the rooting process more difficult.
Step 2
Assuming you followed directions...
- Close Odin_v13.1 & unplug your device while still remaining in Download Mode
- Launch Odin_v13.1 [Patched] & load up the patched_boot.tar in the AP slot
- Reconnect device & proceed to flash
- Device will reboot with "Verification Failure" so you must reset (this is part of root) (it does not activate FRP lock)
( It may get stuck at a soft bootloop on the samsung logo, if it does just hold the power button and volume down until it reboots again then let go. ) ( should not have to repeat this more than once or twice )
- When device reboots to Setup Wizard, skip through it. Do not add any accounts (Google or Samsung). Do not consent to giving any device data for whatever purposes (they will ask twice; look carefully)
- On the home screen, Go to settings - unlock Dev Options & allow USB Debugging. OEM should already have been unlocked.
Step 3
- Connect device to your pc & in the platform-tools+Magisk folder you, run CMD.exe
- Input adb devices to ensure proper connection
- Input adb install -r MagiskManager-v7.0.0.apk to install MM to your device
- Open MagiskManager & make sure everything is good to go (see attached screenshot)
- If everything is done properly then you will see a superuser tab in the left side-bar, indicating root access
ĐØΠΞ
Again many thanks to:
@☆KØŁØЯΛĐØ☆ - for the Original tutorial and testing via another j737p variant.
@topjohnwu - for Magisk
and credit to Vyp3r ( Myself ) @fsceo - for the files pertaining to this variant and modification of the original tutorial.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Would this work to root my SM-J737P with firmware J737PVPS9BUD2 on Android 9.0? What other files do I need to accomplish this? Thanks!