Hello,
I am using coolpad note 3. Unfortunately my mobile was fallen in water, from that day my device was stuck in boot loop. I tried to repair it from local mobile repairing shop. But didn't found any solution to this problem. I tried to flash firmware also, I replaced charging board but the problem still persist. I go through the memory test from sp flash tool It was giving error message"ERROR: NAND Flash was not detected!". Someone can please help me with this problem and suggest me solutions to repair my mobile.
Thank you.
Related
I have this Lenovo A328 which suddenly had multiple and continuous gapps crashes. I tried to do a factory reset but the problem still existed. I decided to flash the stock rom using SP Flash Tool. Flashing the stock rom succeeded but then after, the device does not charge nor boot up. It does not even respond to vol up(or down) + power which brings up a menu for testing the device(not recovery). I tried to format it first before flashing but the result is still the same. I also tried flashing stock rom from different source. Any idea on this one?
Update
I tried to flash a stock rom on my Lenovo A328 with SP Flash Tool but the process was interrupted and now after I flashed the stock rom successfully, the phone won't charge nor boot, not even to recovery. I noticed in my EMMC Flash that the sizes of GP1 - 4 are all 0x0.
I found a solution in here,
http://forum.xda-developers.com/show....php?t=2792667
It says that I have to flash the rom using DOWNLOAD first and then flash it again with FIRMWARE UPGRADE. I'm already at the FIWMWARE UPGRADE process but I got this error
Failed to get PMT info.
Click to expand...
Click to collapse
Can anyone please help me fix the phone? It will be highly appreciated.
Hi,
You can try format all+download option of spflashtool. I can send you the firmware for Lenovo a328 if you want.
Same problem here, any advice ?
You can try format all+download option of spflashtool. I can send you the firmware for Lenovo a328 if you want. Yes i want.
Lenovo a328
Plz send the firmware for Lenovo a328
Hi All,
I have the same problem
did you find any solution?
I want the firmware for Lenovo a328
lenovo a328 not turning on even I successfully flash sa firmware
same problem here.
someone can help?
need some help to resurrect my lenovo a328.
if I format it, there's an error 5073.
Hi, I am having the same problem. Could you help?
Hello everyone!
I am facing the same problem!!!
Tried almost all the solutions suggested on different sites or forums, nothing works, still no charge and no start...
Change the PC, the USB cables, drivers, ROM's, you name it... Someone said this MTK devices are hard to brick but still, why we cannot revive our devices??? Hardware failure? Not really according to some technicians as long your phone is detected by the pc in device manager, the phone CAN be "unbricked".
SO, we are missing something, we doing something wrong???
We need help.... SOMEONE???
please send me the firmware
I have the same problem about my lenovo a328. After flashing, it's not booting and turning on. It's not even charging. So what I did is I tried to firmware upgrade it and I got this ''failed to get PMT info'' alert. Someone know how to revive this phone?
I got 2 phones and they've bricked themselves
Hi,
I got 2 Lenovo A328s and they've bricked themselves, having the same symptoms.
I can get them to boot in Recovery, and I am waiting to download an image to sideload with ADB, which seems to work.
One of them was still in use, but had software glitches, like the camera driver not working in any app.
The other one was replaced 10 months ago, but after long time, it also bricked.
I haven't attempted any flash of new firmware.
I have the same problem, the phone isn't charging and I can't use vol up+ power buttons.
Can you send me the software please and some instructions?
Yesterday i tried to flash custom kernal on my 910g and after reboot it went complete dead now nothing is working,NO DOWNLOAD MODE.But it gets detected in my pc
zero responce from the phone plz help
Common problem with most Note 4's, your eMMC chips is most likely dead. The only fix is a motherboard repair.
My lenovo k4 note totally dead after installing RR-N-v5.8.5-20180105-k5fpr-Final and Zero and while tried to install TWRP using MarshMallow method my device is dead can't boot , no bootloader ,no recovery ,not even vibrate , and not detecting
can' t connect to pc when
trying to use SP flash tool to recover it,can' detect by flash tool
tried to flash with flash tools ver. 5.1524 but not detecting by pc and shows this error always when try to connect pc with flash tool
please see image : https: // goo . gl / bjndc5
kagadhvi said:
My lenovo k4 note totally dead after installing RR-N-v5.8.5-20180105-k5fpr-Final and Zero and while tried to install TWRP using MarshMallow method my device is dead can't boot , no bootloader ,no recovery ,not even vibrate , and not detecting
can' t connect to pc when
trying to use SP flash tool to recover it,can' detect by flash tool
tried to flash with flash tools ver. 5.1524 but not detecting by pc and shows this error always when try to connect pc with flash tool
please see image : https: // goo . gl / bjndc5
Click to expand...
Click to collapse
My best advice would be to consult to the service center... As far as I know, in your current phone condition, there's nothing that we can do... Even if the service center would cost not little, they would surely know what to do
CandyCone said:
My best advice would be to consult to the service center... As far as I know, in your current phone condition, there's nothing that we can do... Even if the service center would cost not little, they would surely know what to do
Click to expand...
Click to collapse
i did it bro
it took sometime but finally i completed solve k4 note issue
figured out
kagadhvi said:
i did it bro
it took sometime but finally i completed solve k4 note issue
figured out
Click to expand...
Click to collapse
Can you please share the process how to solve dead lenovo k4 note issue? My phone is completely dead, service center people also couldn't do anything, please help me.
gpnth22 said:
Can you please share the process how to solve dead lenovo k4 note issue? My phone is completely dead, service center people also couldn't do anything, please help me.
Click to expand...
Click to collapse
download latest flash tools
download stock rom version marsmallow (you'll find it on foru xda)
than flash it with latest flash tools
done.
kagadhvi said:
download latest flash tools
download stock rom version marsmallow (you'll find it on foru xda)
than flash it with latest flash tools
done.
Click to expand...
Click to collapse
I tried flashing stock rom with SP flash tool but my device is not detecting, all drivers are installed properly tried by pressing volume keys & power button also but still not detecting, please give me a solution.
Hi, so I've been around here for a while and I've had pretty good success with flashing phones.
However, I have a Lenovo A6000 that is hardbricked with Resurrection Remix ROM:
https://forum.xda-developers.com/lenovo-a6000/development/rom-resurrectionremix-5-8-1-t3555184
Followed the destructions and now it is stuck rebooting. I'll see the neat RR logo start and then it will freeze, and then reboot.....over and over. I didn't wipe the phone and start new...thought I could install TWRP and wipe it, flash the new ROM and be done. Nothing like being confident.
So now, it is hardbricked after trying to flash the stock rom....and I cannot figure out how to fix it. Downloaded QFIL, and the stock ROM, installed the Qualcomm drivers, put the phone into Fastboot with VOLUME DOWN + POWER BUTTON and QFIL see's the phone but gets stuck on fail sahara error. I have done countless searches online and the videos I have found don't resolve the problem. Google search turns up no solution. There is a thread here that basically just dies with no solution.
The phone ready for the trash bin?
Also tried Lenovo Downloader and it also gets stuck on step Sahara.
The little cheap phone belongs to a girlfriend of mine (she's a single mom) who has no money to buy a new one, and everyone here knows how awful the stock ROM. So I'm trying to help her out and flash this bugger. I had an A6000 before I bought my MiMax2 and it wasn't a bad little phone after getting RR on it.
Will anyone be willing to help?
?
So no one is willing to help with this problem huh?
From what I can tell the phone is junk now....even though both QFIL and Lenovo Downloader will see it when I plug it in.
Well...thanks anyway.
So who wants to be paid to help fix this problem? You must have PayPal and must be able to solve the problem.
I guess the problem is that a lower version OS can't be installed via QFIL. For example if the phone got bricked in lollipop you can't install kitkat on it via QFIL. Although the same version OS might work (lollipop to lollipop) and of course higher version OS will work.
I have also had some version of QcomDLoader flash tool work where other flash tools simply failed or even older versions of QcomDLoader didn't work.
This is the one that worked for me https://androiddatahost.com/dt3gh9
move firmware (SW_LENOVO BLABLABLA) to loca disk :C
restart pc > then flash again.
Hello, Dear XDA-Developers.
I was trying some custom ROMs but when I installed Viper4Android and flashed it using Magisk the phone stucks on boot
However I have another problem, I found out that the internal storage of my phone got too small after upgrading into another version of Android, so I wanted to get back to Android 5 stock firmware completed to format the internal storage and not partitioning it as I thought so I tried to flash it in TWRP recovery but sadly after that I bricked the bootloader and the recovery. Next, I decided to flash a board image ALE-L02&L21&L23_MAA001077_Board_Software_general_05021SJN using IMAGE Download Software - IDTML01Ver1001, Still, the process got interrupted maybe because the phone was restarting itself and now I'm getting a screen that shows error after showing Huawei Ascend logo. Is there any chance to fix this dead phone but consider that my pc is no longer detecting the driver that I used to flash the board image, and I can't even turn off the phone now except if I let the battery dies.
Notice: I don't dare to use test points if there is no other choice how much it usually costs to fix it?