I am thinking about installing Windows 8 developer preview alongside Windows XP whether this will cause any problems?
Whether I should format Windows XP and then install Windows 8?
look here
http://forum.xda-developers.com/showthread.php?p=17673518&posted=1#post17673518
texonex said:
look here
http://forum.xda-developers.com/showthread.php?p=17673518&posted=1#post17673518
Click to expand...
Click to collapse
Before you blab,...
Dualbooting with Windows XP is special. Windows XP is so deprecated that the Win8 bootloader does not show it.
It is possible, as my computer's primary OS is WinXP; Win8 is my secondary and Ubuntu 11.04 is my tertiary OS. Only Win8 shows up in the Win8 bootloader; I had to EasyBCD and write the Win7 bootloader to my MBR and add the other two manually.
Yes, I dual-booted WinXP with Win 8... But how to dual boot Win 8 with ubuntu ?
TheWhisp said:
Yes, I dual-booted WinXP with Win 8... But how to dual boot Win 8 with ubuntu ?
Click to expand...
Click to collapse
Same way as usual. Do a straight partition and install from LiveCD/USB.
If you want to triple boot, I don't think you'll have much success with a Wubi-based install because it would only write to the bootloader of the Windows install that it was installed to AFAIK. I transitioned my Wubi install to a full partition once I installed Win8. It didn't stop it from not appearing on the Win8 bootloader.
I have Windows 8 and Ubuntu 11.10 in separated partitions. I had Win 8 installed first, then I installed ubuntu, but GRUB doesn't add Win to boot menu, when I run "sudo update-grub" it doesn't detect Windows 8
My PC was previously on dual boot with Microsoft Windows 7 (x86) and Linux Fedora 17 (x64). I installed Windows 8 (x86) on the Windows 7 partition by formatting it. I'm not able to install the GRUB 2 bootloader from the Fedora LIVE session (I think Windows 8 secure boot is blocking it).
I'm thinking of going back to Windows 7. Does anybody have a better option?
Sent from my Motorola Defy with CM9
swapnil360 said:
My PC was previously on dual boot with Microsoft Windows 7 (x86) and Linux Fedora 17 (x64). I installed Windows 8 (x86) on the Windows 7 partition by formatting it. I'm not able to install the GRUB 2 bootloader from the Fedora LIVE session (I think Windows 8 secure boot is blocking it).
I'm thinking of going back to Windows 7. Does anybody have a better option?
Sent from my Motorola Defy with CM9
Click to expand...
Click to collapse
That's really weird, I had Windows 7 and Ubuntu 12.04, I had to fix the GRUB bootloader after installing Windows 7 on a new partition after I had Ubuntu alone. I installed Windows 8 on that 7 partition and it didn't mess with the bootloader. Try fixing GRUB with an Ubuntu 12.04 LIVE session.
i have a problem
i had windows 8.1 64-bit in my pc then after that i installed windows 8 32-bit in different partition after that when i reboot my pc i didn't get the dual boot option to choose between windows 8 and 8.1..my system automatically loads windows 8....
Sounds like you didn't do the installation safely with regard to the old OS. The 64-bit one may have been using a 64-bit bootloader? In any case, you may have clobbered the boot partition of the old installation. You can try using bcdedit to add a boot entry for the old OS - it might still work - but you may need top use 64-bit Win8.1 recovery media instead (and doing so you risk clobbering the boot partition for the 32-bit install).
... Do I dare ask why somebody would *do* this? I mean, I could understand if you were installing Win7 or something, and even vaguely understand why you'd install 32-bit instead of 64-bit (though these days I pretty much exclusively use virtual machines for 32-bit systems) but why in the world install 32-bit Win8 on a 64-bit Win8.1 machine??
Hi guys
There is a way to run the phoenix OS within Windows? i tried to replace the system, data, kernel of the Remix Os player but cannot boot it
Maybe uses some kind of virtualization software like hyper-v or virtualbox. U can run phoenix os in virtualbox. U can google for some tutorials to install in virtualbox.
Why run Phoenix OS inside Windows?
Maybe your PC is powerful enough but it's better to dualboot Phoenix OS with Windows.
Make sure to backup phoenixldr file before upgrading to a newer version of Windows 10.
Hi,
How to make a PC Triple Boot Android, Windows 7 and Windows 10?
Thanks
M. Al said:
Hi,
How to make a PC Triple Boot Android, Windows 7 and Windows 10?
Thanks
Click to expand...
Click to collapse
You can use programs like Partition Magic
Maay gaad, I thought this is a tutorial thread
sure u have 3 hard disk with different Operating System (maybe)
Wondering
How it could be done.
zanodor said:
How it could be done.
Click to expand...
Click to collapse
By partitioning your hard drive and then installing each operating system in each partition then use the Grub bootloader software to allow you to choose which of the 3 systems you want to boot when you power on.
https://www.quora.com/Is-it-possible-to-install-Linux-with-Android-and-windows-10-dual-boot-easy-way
Sent from my SM-S767VL using Tapatalk
Hi,
You can also use Virtualbox or other virtualization software to create multiple virtual machine and RUN them on a single machine.
If your computer has good amount of RAM, then you utilize this Virtualbox software. It really works fine. Instead of creating different partition, i think it will be much better option.
Thanks,
Hope it helsp
ziafimawad said:
sure u have 3 hard disk with different Operating System (maybe)
Click to expand...
Click to collapse
I am curious how to do it?
Saenyu67 said:
I am curious how to do it?
Click to expand...
Click to collapse
You can use 1 hard drive or 2 hard drives or 3 hard drives, it works the same regardless of how many you use. It's easily done with just 1 hard drive. If you look at my previous post a few posts back in this thread, you will see a link with instructions to partition your hard drive to create a partition for each of the OS's that you want to install, then you install each operating system in each separate partition that you choose to install them in.
Sent from my SM-S767VL using Tapatalk
How to make a PC Triple Boot Android, Windows 7 and Windows 10
Windows booting is a simple process. You can easily boot your windows 7 OR Windows 10
you can useing some free tools for booting window 10 and windows 7.
I can explained here how to boot a drive easily. I think it will benefit you. For than messege me personally.
Thank you very much.
mdakashhossain said:
Windows booting is a simple process. You can easily boot your windows 7 OR Windows 10
you can useing some free tools for booting window 10 and windows 7.
I can explained here how to boot a drive easily. I think it will benefit you. For than messege me personally.
Thank you very much.
Click to expand...
Click to collapse
You don't understand what they are trying to do.
Sent from my SM-S767VL using Tapatalk
for android, you can use "bluestacks" on windows
So you want to use Windows 10, Windows 7 and Android on PC. For that first create 3 or 4 partitions one for windows 10, one for windows 7 and one for android. Install Windows 10 and Windows 7 on separate partitions and you will see that you have a option to boot into windows 7 or 10. now to install Android use a android based OS such as Prime OS and install it on a separate partition. You can use the pre installed grub or you can use grub2win to get all operating systems that you need
mdakashhossain said:
How to make a PC Triple Boot Android, Windows 7 and Windows 10
Windows booting is a simple process. You can easily boot your windows 7 OR Windows 10
you can useing some free tools for booting window 10 and windows 7.
I can explained here how to boot a drive easily. I think it will benefit you. For than messege me personally.
Thank you very much.
Click to expand...
Click to collapse
Hey there I'm also interested in this I currently have garuda Linux and can't get Windows 10 on
I've done this for a while, my easiest solution is:
1. Make 3 or 4 partitions. Windows 10, windows 7, data partition, and a Linux partition. (There may more created e.g. a system partition). Dont touch the data partition throughout all of this except for storing your OS ISO, liveboot ISO, other program files etc.
2. Install windows 7 on windows 7 partition.
3. Install windows 10 on windows 10 partition. Can be installed from windows 7. Let windows handle making a windows bootloader which can now boot into windows 7 or 10.
4. Create a live USB in ine of your windows. I've been using Ubuntu but used Fedora for years prior. If you aren't sure if you need x64 then go woth the 32 bit x86 architecture (useful to be able to boot on 32 and 64 bit machines). Now boot up your live USB into Linux and install automatically onto Linux partition. You'll now have a GRUB bootloader which can boot into Linux or into your windows bootloader.
5. Install android emulator. I used Linux as I felt I would get better performance emulating android in Linux, this may or may not be true.
There will things that you might find as a nuisance, for example when I boot into windows 7 from windows 10, I need to boot into the GRUB to windows bootloader, select windows 7 and it reboots again back into GRUB and then into windows 7. Not a big deal unless you want to switch OS a lot. If this is the case, you may want to just emulate to begin with. I have a laptop with *ok* processor and RAM, not the best for emulating another OS.
There is many options - you could even install Linux within windows if you so choose. Ultimately the best path will be based on your knowledge, specs of your PC ( power, ram, disk space, disk type [fora mount of partitions], BIOS/UEFI, etc. The method I laid out is the most automated and easiest method I have come up with. Don't try installing windows on top of Linux, you'll cause a headache fixing everything for your Linux system. But then again, everything I've done in Linux the hard way has helped me to understand Linux better. I've just found that even laying out all of the partitions manually for Linux can be challenging, especially if you only have 1 computer and your data is not backed up elsewhere. Start with a blank machine if you can, and have another computer on hand, then you'll have an easy time starting over if necessary. Theres still so many more options of how to do what you are asking... good luck and happy tripple booting
Flash-ARMy said:
I've done this for a while, my easiest solution is:
1. Make 3 or 4 partitions. Windows 10, windows 7, data partition, and a Linux partition. (There may more created e.g. a system partition). Dont touch the data partition throughout all of this except for storing your OS ISO, liveboot ISO, other program files etc.
2. Install windows 7 on windows 7 partition.
3. Install windows 10 on windows 10 partition. Can be installed from windows 7. Let windows handle making a windows bootloader which can now boot into windows 7 or 10.
4. Create a live USB in ine of your windows. I've been using Ubuntu but used Fedora for years prior. If you aren't sure if you need x64 then go woth the 32 bit x86 architecture (useful to be able to boot on 32 and 64 bit machines). Now boot up your live USB into Linux and install automatically onto Linux partition. You'll now have a GRUB bootloader which can boot into Linux or into your windows bootloader.
5. Install android emulator. I used Linux as I felt I would get better performance emulating android in Linux, this may or may not be true.
There will things that you might find as a nuisance, for example when I boot into windows 7 from windows 10, I need to boot into the GRUB to windows bootloader, select windows 7 and it reboots again back into GRUB and then into windows 7. Not a big deal unless you want to switch OS a lot. If this is the case, you may want to just emulate to begin with. I have a laptop with *ok* processor and RAM, not the best for emulating another OS.
There is many options - you could even install Linux within windows if you so choose. Ultimately the best path will be based on your knowledge, specs of your PC ( power, ram, disk space, disk type [fora mount of partitions], BIOS/UEFI, etc. The method I laid out is the most automated and easiest method I have come up with. Don't try installing windows on top of Linux, you'll cause a headache fixing everything for your Linux system. But then again, everything I've done in Linux the hard way has helped me to understand Linux better. I've just found that even laying out all of the partitions manually for Linux can be challenging, especially if you only have 1 computer and your data is not backed up elsewhere. Start with a blank machine if you can, and have another computer on hand, then you'll have an easy time starting over if necessary. Theres still so many more options of how to do what you are asking... good luck and happy tripple booting
Click to expand...
Click to collapse
Yes, exactly what I was indirectly suggesting. I've done it the way you describe before, but, alternatively, you can just create 2 partitions on your hard drive then install Win10 and Win7 in those partitions then create a Linux live USB or even install a full Linux distro on a fairly large USB flashdrive/external hard drive(preferably something that has solid state storage, this enables faster booting and performance and allows installing drivers and packages) and then go into BIOS and set your boot priority to boot from USB first, save changes and exit. Then, when you want to boot Linux you just connect your external drive/USB then reboot the device and it will automatically boot Linux without having to use grub and when the Linux drive isn't connected you will be able to boot 10 and 7 via windows bootloader. A little more round about but makes booting back and forth between operating systems.
Droidriven said:
Yes, exactly what I was indirectly suggesting. I've done it the way you describe before, but, alternatively, you can just create 2 partitions on your hard drive then install Win10 and Win7 in those partitions then create a Linux live USB or even install a full Linux distro on a fairly large USB flashdrive/external hard drive(preferably something that has solid state storage, this enables faster booting and performance and allows installing drivers and packages) and then go into BIOS and set your boot priority to boot from USB first, save changes and exit. Then, when you want to boot Linux you just connect your external drive/USB then reboot the device and it will automatically boot Linux without having to use grub and when the Linux drive isn't connected you will be able to boot 10 and 7 via windows bootloader. A little more round about but makes booting back and forth between operating systems.
Click to expand...
Click to collapse
I had a project to run Windoes 10 on an SD card, which proved to be more difficult than I tbought it would be. I didn't think it should have been difficult, but it seems software amd hard tales measures to prevent this from being possible / "easy". Linux is quite easy to use a live USB, so I've done that quite a bit (I'd keep a 32 bit live USB on my Keychain). I don't think I was ever able to update drivers or install updates to the live USB, however I didn't make much of an effort too. I basically used it as a save my ass tool, which it certainly did come in useful quite often in the course of my personal/school/work computer needs.
Flash-ARMy said:
I had a project to run Windoes 10 on an SD card, which proved to be more difficult than I tbought it would be. I didn't think it should have been difficult, but it seems software amd hard tales measures to prevent this from being possible / "easy". Linux is quite easy to use a live USB, so I've done that quite a bit (I'd keep a 32 bit live USB on my Keychain). I don't think I was ever able to update drivers or install updates to the live USB, however I didn't make much of an effort too. I basically used it as a save my ass tool, which it certainly did come in useful quite often in the course of my personal/school/work computer needs.
Click to expand...
Click to collapse
Instead of installing Linux live on USB, you can do a full installation of Linux on the USB the same as you would when installing Linux on hard drive. A Live USB can be setup with a persist partition to provide a bit of storage on the USB but it isn't enough to do anything with that is useful, that is why it is better to just install the distro on USB instead of using USB to run Linux live.