What it is Im trying to do is be able to plus my phone directly into a ps4 to give the ps4 internet access. I've tried using a USB otg cable and connecting a USB to ethernet adapter made for a laptop(did not work). Any thoughts?
Related
Hi,
I was hoping to use a wired ethernet connection to my N7.
I was reading it was possible and I happen to have the cables from before. A micro usb to usb female and then a usb to ethernet adapter. Mine is based on ADM 8515 and it doesn't work.
I haven't rooted or done anything else yet.
I have seen reports that another usb to ethernet adapter works, based on AX88772.
Anyone managed to get this to work? Does it work out of the box with the AX88772? Anyone managed to get it to work with this ADMTek one, or any other chipset?
Mons
Hello all,
I'm currently attempting to have my Nexus 7 be both connected to the internet via a USB to ethernet lead while also being charged.
I'm able to do each of these individually but when I attempt to use a random USB hub i have to hand I am unable to get both to work, the charging works but the ethernet does not.
When I connect straight through (OTG Cable to USB to ethernet converter) it works fine, however, when going through the USB Hub (with the power for charging disconnected) comms is achieved (ethernet switch is flashing) but I can't connect to the internet. This leads me to believe there is something specific I require for the USB hub.
Do I require the USB hub to be something special to enable this/ is this scenario even possible for me to achieve?
Cheers for the help.
I just got in a Micro USB to USB OTG Adapter Cable ($4), Plugable USB 2.0 to 10/100 Fast Ethernet LAN Wired Network Adapter ($13) and Plugable USB 2.0 to 10/100/1000 Gigabit Ethernet LAN Wired Network Adapter ($25) from Amazon, and both Ethernet adapters work with the OTG cable on my Moto X!
Plug either adapter in and upon establishing a connection, Wifi turns off (if it was on) and the wired interface becomes the default interface and default route. Remove the adapter and everything reverts to the way it was.
Most apps I tried with the wired connection worked fine, but some did not - most notably Fing Network Tools. I was really hoping that Fing Network Tools would work better than it does with the wired connection. I've already made suggestions to the Fing developers to better accommodate wired connections.
For $17 you can turn your Moto X into a basic network troubleshooting tool for wired connections using LanDroid.
UncleMike said:
I just got in a Micro USB to USB OTG Adapter Cable ($4), Plugable USB 2.0 to 10/100 Fast Ethernet LAN Wired Network Adapter ($13) and Plugable USB 2.0 to 10/100/1000 Gigabit Ethernet LAN Wired Network Adapter ($25) from Amazon, and both Ethernet adapters work with the OTG cable on my Moto X!
Plug either adapter in and upon establishing a connection, Wifi turns off (if it was on) and the wired interface becomes the default interface and default route. Remove the adapter and everything reverts to the way it was.
Most apps I tried with the wired connection worked fine, but some did not - most notably Fing Network Tools. I was really hoping that Fing Network Tools would work better than it does with the wired connection. I've already made suggestions to the Fing developers to better accommodate wired connections.
For $17 you can turn your Moto X into a basic network troubleshooting tool for wired connections using LanDroid.
Click to expand...
Click to collapse
Thanks for the heads-up! This could be VERY useful
According to this thread = http://forum.xda-developers.com/showthread.php?t=2238840, I need to have either a custom Kernel or ROM in order to able to use my newly purchased Plugable USB 2.0 to 10/100/1000 Gigabit Ethernet LAN Network Adapter and Micro USB Host OTG Cable with Micro USB Power.
Unfortunately, I'm having a bit of difficulty finding any that support or include the drivers for my adapter. Does anyone know of any that support USB Ethernet adapters out of the box?
I want to use the phone with a lan cable. I have tried a ugreen usb-c rj-49 adapter but it didn't work (apparently it has otg).
Is there an underlying issue with A1 or should I try another adapter?
I'm using a tp-link ue330 adapter. Phone recognizes ethernet, and other connected usb devices. For this I need an type-a -type c otg adapter too.
edit: not sure about stock rom, but on los since beginning it was working for me.