https://drive.google.com/open?id=1lKb2LQQm-BN0vKe633IanHyRCr_JJ-03
After flashing the device hangs on boot screen.*
https://mega.nz/#!u2RQgYjA!CcGyDQxWxopeM7r53hPuNVRC-REK66aAwcWBAOG1DFg
https://mega.nz/#!pEchRIBb!91652-65ctWHuloQomLulDmzHWUog9FVsXy-ra1ik2c
" Hk1 max+ rk3368 4gb ram 128gb rom " orjinal Firmware Link???
Hello
I have a “Hk1 max + rk3368 4gb ram 128gb rom” device. After the electricity was cut off, it was not turned on again. I think there is a USB-PC connection, original or appropriate software ROM
As far as I searched amateurly on the internet, there is none.
” Hk1 max+ rk3368 4gb ram 128gb rom ”
orjinal Firmware Link???
Since I have been following your good research and studies for a long time, I thought about writing and asking for help. thank you
I wish you success in your work
Yours truly
oktay
Related
Hi !
I just bought a head unit I founded on AliExpress :
http://www.aliexpress.com/item/Quad...dition-Edge-Fusion-F150-F500/32344021566.html
This one is especially compatible with Ford cars, and it works pretty well with my 2005 Mustang GT.
Here is some informations :
Model n° : S07
MCU : MTCB-KGL-V2.55
Android version : 4.4.4_01062015
Kernel : 3.0.36++
Build number : rk3188-eng4.4.4 01062015.15:09:11
CPU : armv7 1.6GHz (x4)
RAM : Samsung DDR3 1GB
Internal storage : 16Gb
Screen : 1024*600
I founded some issues :
sometimes the storage does not mount at boot (internal / GPS card / Sd card). It's ok if I reset the unit
my android phones are not detected by the head unit (OnePlus and Micromax). They can be charged, but nothing more appens, so it's impossible to try the "mirror link".
Otherwise, it's fine. The audio quality is quite good, my reverse camera is switched on automatically (with the can-bus adapter).
The factory settings are accessible with the usual password "126".
It's seems to be the same as this one : Seicane S127302
http://www.seicane.com/fr/seicane-s...h-3g-wifi-bluetooth-rearview-mirror-lien-obd2
Hardware and software are the same
Hello from France,
I just bought a KC BX-411 Android 6.0 head unit on aliexpress, I found the manufacturer with the name , it is a KC Cartech product www_kccartech_com/eacp_view.asp?id=226 , I’m very happy with it except that I can not pair my OBDLink LX OBD adapter.
No problem with bluetooth to connect a phone and it works, the only problem is for the obd adapter, only one chinese model of a friend is working and it have to be named "OBDII" and have MAC Address (identity card) : AA:BB:CC:11:22:33 , it is the generic chinese typical OBD but the problem is that mine has a different name and obviously another MAC Address and the car radio can't pair it (see video) , It seems that the firmware of the car radio is locked to use only a generic chinese "OBDII" with MAC Address : AA:BB:CC:11:22:33. It has been confirmed by a friend who have a android car radio too with same problem and had to replace the original firmware by a sda developer firmware update to solve the problem.
Do you have a firmware update to upload in the car radio to replace mine to be able to connect any OBD adapter ?
ANTUTU Benchemark v6.2.7 (Score 19695):
CPU Allwinner T3 Cortext A7 Quad Core 1.2GHz
RAM DDR3 1GB INAND 16GB
Android 6.0.1 (32bits) SDK 23
Renderer Mali-400 MP2
GPU OpenGL ES 2.0
screen 800x480 (240dpi)
RAM 752MB
HDD 3,87GB
HDD 7,51GB
Thanks,
PIFOUBMW
Same problem as well...
Were you able to find ny solution to this?
No
From OBDLink support Forums:
You can try renaming your OBDLink with the command STBTDN.
Once connected, you can issue the command "STBTDN OBD". You will then have to power cycle the unit. Once it powers up the device should now broadcast as "OBD".
You can also try changing the Class of Device with the command STBTCOD.
Once connected, you can issue the command "STBTCOD 200400". You will then have to power cycle the unit.
Hi,
Do you have a link to that or to instructions on how to send the command to the OBDLink LX?
Thanks.
marchnz said:
From OBDLink support Forums:
You can try renaming your OBDLink with the command STBTDN.
Once connected, you can issue the command "STBTDN OBD". You will then have to power cycle the unit. Once it powers up the device should now broadcast as "OBD".
You can also try changing the Class of Device with the command STBTCOD.
Once connected, you can issue the command "STBTCOD 200400". You will then have to power cycle the unit.
Click to expand...
Click to collapse
PIFOUBMW said:
Hello from France,
I just bought a KC BX-411 Android 6.0 head unit on aliexpress, I found the manufacturer with the name , it is a KC Cartech product www_kccartech_com/eacp_view.asp?id=226 , I’m very happy with it except that I can not pair my OBDLink LX OBD adapter.
No problem with bluetooth to connect a phone and it works, the only problem is for the obd adapter, only one chinese model of a friend is working and it have to be named "OBDII" and have MAC Address (identity card) : AA:BB:CC:11:22:33 , it is the generic chinese typical OBD but the problem is that mine has a different name and obviously another MAC Address and the car radio can't pair it (see video) , It seems that the firmware of the car radio is locked to use only a generic chinese "OBDII" with MAC Address : AA:BB:CC:11:22:33. It has been confirmed by a friend who have a android car radio too with same problem and had to replace the original firmware by a sda developer firmware update to solve the problem.
Do you have a firmware update to upload in the car radio to replace mine to be able to connect any OBD adapter ?
ANTUTU Benchemark v6.2.7 (Score 19695):
CPU Allwinner T3 Cortext A7 Quad Core 1.2GHz
RAM DDR3 1GB INAND 16GB
Android 6.0.1 (32bits) SDK 23
Renderer Mali-400 MP2
GPU OpenGL ES 2.0
screen 800x480 (240dpi)
RAM 752MB
HDD 3,87GB
HDD 7,51GB
Thanks,
PIFOUBMW
Click to expand...
Click to collapse
I have the same issue, I found that the issue is with the Bluetooth Module (Chip) itself.
You need to check the Bluetooth Module# manually. If you have bluetooth module RDA 5850SM then you need to go through this process CLICK HERE (Credits @****-jones )
rizu3544 said:
I have the same issue, I found that the issue is with the Bluetooth Module (Chip) itself.
You need to check the Bluetooth Module# manually. If you have bluetooth module RDA 5850SM then you need to go through this process CLICK HERE (Credits @****-jones )
Click to expand...
Click to collapse
hello,
do you know where i can find the files of the russian forum (goc.rar)?
it seems that the link is dead
thnk you
nirudha said:
Hi,
Do you have a link to that or to instructions on how to send the command to the OBDLink LX?
Thanks.
Click to expand...
Click to collapse
I know this is old but I just got my OBDLink mx to work with the android head unit
You need to change the class of device to 001f00.
You can follow this instructions here. I had to use my laptop to make the changes with obdwiz and then power cycle the OBDLink mx.
https://www.scantool.net/forum/index.php?topic=15863.0
Hi everyone.
xtrons support sent me the following files:
21a4f59a-0a56-11e8-91c9-971a30d57911
22e42020-0a56-11e8-ABEF-631acfb3beab.0
22e42020-0a56-11e8-ABEF-631acfb3beab.1
22e42020-0a56-11e8-ABEF-631acfb3beab.2
2516e792-0a56-11e8-8f93-f3371fae028e
just do not start the upgrade, I tried to put them in a usb fat key without success, on a microsd in the gps slot without success.
the support does not know how to explain why the update does not start, do you have any idea?
the car radio is:
MCU: T5.3.19-36-30-E53201-181229
Processor type: QuadCore-T3
Android version: 8.1.0
System version: V8.3.2_20181213.134606_MLT6-DVD
DVD version: 2.13.15-860mc-150417
I think some files are missing
Hello! Same here... My device/unit is a TD702AB. I have been mailing with the support for about 3 months now and we didn't make progress so far.
They sent me these two links: /1drv.ms/u/s!AjrY0uqbW_kBghlW0KagxRnQQh7o and /1drv.ms/u/s!AjrY0uqbW_kBlDS9Zh_Jm-Zi4jg6
These are the update files they want me to install... One small problem, the device won't recognize the update package. Whenever I insert the SD card into the GPS card slot nothing happens, it says "Preparing SD card". (I copied the decompressed files onto the root folder of the SD card.) Please help me. This device is useless without an update. It's keep freezing, restarting and i can't install apps because Google Play is outdated.
Xtrons Firmware
gundam_gdm said:
Hi everyone.
xtrons support sent me the following files:
21a4f59a-0a56-11e8-91c9-971a30d57911
22e42020-0a56-11e8-ABEF-631acfb3beab.0
22e42020-0a56-11e8-ABEF-631acfb3beab.1
22e42020-0a56-11e8-ABEF-631acfb3beab.2
2516e792-0a56-11e8-8f93-f3371fae028e
just do not start the upgrade, I tried to put them in a usb fat key without success, on a microsd in the gps slot without success.
the support does not know how to explain why the update does not start, do you have any idea?
the car radio is:
MCU: T5.3.19-36-30-E53201-181229
Processor type: QuadCore-T3
Android version: 8.1.0
System version: V8.3.2_20181213.134606_MLT6-DVD
DVD version: 2.13.15-860mc-150417
I think some files are missing
Click to expand...
Click to collapse
Please, could you provide the firmware for us? Thanks.
View attachment 5560843
Hello there, wish you all a great week!
Need u r help.
I have a Radio with a Allwinner T3 inside running android 7.1.1.
I was trying some settings like : ext speed / usb speed and after a reboot, the unit´s screen is now "Black" ...it has backlight but shows no Android logo whatsoever!
The radio tuner display is on, but has no sound and of course no android.
Volume up down turning button works
Bluetooth is not visible!
Tried to use " he sun8iw11p1" .imf file but looks like the The "Phoenix Suite" does not recnognise the device
Also Tried "Phoenix card" but am not able to format the card : I aways get and empty folder after the format
Any helpfull sould could help please?
Some pictures attached...
Dear sirs,
I bought an android GPS Radio for Rneault/Dacia Sandero on Aliexpress
But I have problems with this radio :
1/ Radio recognize only One of the 3 USB outputs : the 4 pins USB. The 6 pins USB is not recognzed
2/ system emulates an USB Key vith 48 Go. If I connect an USB cable on 6 pins USB, this emulated USB key disappears
3/ There are many troubles with RDS Radio function : radios are found with AF/TA signal, but sometimes the radio doesn't accept AF signal and jump to another radio station or freezes.
System has 2 Go Internal memory and 64 Go stockage memory, and processor is a four-core processor.
I would find another firmware.
The actually firmware is : ZXDZ_2+64 AC8227L_2022.04.25.16
I want know if existing another firmware, totally wrote in French or in English (because actuallt some menus are in Danish, Finnish or Norvegian, I don't really know, but I don't understand)
Please could you help me.
If there is no newer ou compatible firmware, is it possible to modify software RDS function and USB ? (And If we could have only one enormous 64 Go disk...
Many Thanks
(Sorry for ma bad english, I'm French and I speak English just a little)
Post Android system information including MCU version
My actual firmware
Hello,
This system come with a AC8227L processor, 2 Go RAM and 64 Go storage memory
Canbus is active (Canbud Renault/Dacia)
Android version is Android 10
Many Thanks (sorry I've writing another message for my problem because I couldn't refund my first message, so if moderation could do it, please merge my two messages)