hello, hope somebody will help me.
i have an pna from pioneer called pm-990 made in china:
the processor is ARM.
os: windows ce 5 core
i have tried to make an update and after finding an image i put it on my sd card and the card in the pna. i restarted the pna and the update procedure started after showing a few rows, a window appeard, it was searching for an update, it couldn't find any update. after that a reboot it and noe when i try to power it he shows the start image for a few seconds and then shut's down.
please help me. i'm desperate.
Hello Guys,
I have downloaded the firmware update from official website , Please let me know the steps to upgrade it.
Thanks
sreenidev said:
Hello Guys,
I have downloaded the firmware update from official website , Please let me know the steps to upgrade it.
Thanks
Click to expand...
Click to collapse
Hello , can you provide link to download the 940 firmware
It is explained inside the zip file :
10114039xx - Cape Town 94x, Columbia 945, Atlantis 945
*** IMPORTANT NOTES ***
This update is only suited for the above mentioned devices, the name and full number must match, otherwise you will destroy your device with this update!
After the update all settings are set back to their default values (excluded the navigation settings).
IMPORTANT: If you have any problems with the steps given, please contact Blaupunkt Support ([email protected]) BEFORE damaging the device by making a mistake. You may have a friend or acquaintance able to help.
Please read the ENTIRE instructions carefully BEFORE updating. Note that EACH step must be taken in the sequence given and understood beforehand.
If any error occurs during any update or updating is carried out erroneously the device will be irreparably damaged.
Please do not update your device if it works well.
Neither the engine nor the ignition may be (de-)activated during updating. Do not activate any consumer on or in the vehicle during updating. We cannot accept any liability whatsoever for erroneous updating or consequent damage to any device.
*** PREPARATIONS ***
* You need a MicroSD card with SD adaptor (recommended size 2- 8 GB) to update.
* NEVER use the memory card from the device on which the navigation software is stored.
* FORMAT the memory card using the FAT (FAT16)/ FAT32 format (don’t merely delete extant data).
* Unpack SD.zip and copy the data onto the MicroSD (copy directories and files to the root directory)
* Please double- check that you have copied ALL files from "SD.zip" to the MicroSD. Some OS or antivirus programs may block some files. Do not start the update if files are missing on MicroSD!
* The update is password protected. To unpack the update enter "BLAUpunkt“
(without the inverted commas)
*** PERFORMING THE UPDATE (takes about 5- 10 minutes) ***
* 01. Power on your device, power OFF again with the ON KEY on the radio. Now remove all attached storage devices like microSD, USB key, HDD, iPod...
* 02. If your device is equipped with navigation: Remove the navigation MicroSD card from the card reader behind the cover (gently press it in until it clicks) and put it away somewhere safe. Use a pair of pincers if necessary. DO NOT use force or tools such as screwdrivers or pliers.
* 03. Now insert the prepared update MicroSD card into the MAP slot.
* 04. Press HOME key (small HOUSE symbol) and switch the device ON, update MUST start now, you can release HOME key (If you get a FAIL message or update does not start, please check your MicroSD card, see above chapter PREPARATIONS)
* 05. Afterwards the device will reboot and show an upgrade screen. Please select UPGRADE ALL and confirm it on next page. Please note: If device suddenly reboots during bluetooth upgrade, please upgrade step for step in following order: MCU - HDMI - BLUETOOTH. Please restart Bluetooth update repeatedly in case of problems, do not start other updates again ).
06. After finishing all updates, the device will reboot. Please remove microSD (DO NOT restart the upgrade again!).
*** UPDATE OF USB RSE/ CD/DVD DRIVE (OPTIONAL, only via RSE USB, only needed if USB RSE is used) ***
01. Insert the microSD to an USB Adaptor and insert it to RSE USB connector on the back of the device (or extract SD.ZIP to an USB key). Start and confirm upgrade with UPGRADE ALL. Afterwards the device will reboot. Please remove USB device (DO NOT restart the upgrade again!)
Please compare installed software versions with the given versions in the CHANGES text file. We suggest to do FACTORY RESET after update.
CONGRATULATIONS! YOUR DEVICE IS NOW UP TO DATE! IF YOU EXPERIENCE ANY PROBLEMS WITH THE UPDATE DO NOT HESITATE TO CONTACT US AT
[email protected]
Francois57 said:
It is explained inside the zip file :
10114039xx - Cape Town 94x, Columbia 945, Atlantis 945
*** IMPORTANT NOTES ***
This update is only suited for the above mentioned devices, the name and full number must match, otherwise you will destroy your device with this update!
After the update all settings are set back to their default values (excluded the navigation settings).
IMPORTANT: If you have any problems with the steps given, please contact Blaupunkt Support ([email protected]) BEFORE damaging the device by making a mistake. You may have a friend or acquaintance able to help.
Please read the ENTIRE instructions carefully BEFORE updating. Note that EACH step must be taken in the sequence given and understood beforehand.
If any error occurs during any update or updating is carried out erroneously the device will be irreparably damaged.
Please do not update your device if it works well.
Neither the engine nor the ignition may be (de-)activated during updating. Do not activate any consumer on or in the vehicle during updating. We cannot accept any liability whatsoever for erroneous updating or consequent damage to any device.
*** PREPARATIONS ***
* You need a MicroSD card with SD adaptor (recommended size 2- 8 GB) to update.
* NEVER use the memory card from the device on which the navigation software is stored.
* FORMAT the memory card using the FAT (FAT16)/ FAT32 format (don’t merely delete extant data).
* Unpack SD.zip and copy the data onto the MicroSD (copy directories and files to the root directory)
* Please double- check that you have copied ALL files from "SD.zip" to the MicroSD. Some OS or antivirus programs may block some files. Do not start the update if files are missing on MicroSD!
* The update is password protected. To unpack the update enter "BLAUpunkt“
(without the inverted commas)
*** PERFORMING THE UPDATE (takes about 5- 10 minutes) ***
* 01. Power on your device, power OFF again with the ON KEY on the radio. Now remove all attached storage devices like microSD, USB key, HDD, iPod...
* 02. If your device is equipped with navigation: Remove the navigation MicroSD card from the card reader behind the cover (gently press it in until it clicks) and put it away somewhere safe. Use a pair of pincers if necessary. DO NOT use force or tools such as screwdrivers or pliers.
* 03. Now insert the prepared update MicroSD card into the MAP slot.
* 04. Press HOME key (small HOUSE symbol) and switch the device ON, update MUST start now, you can release HOME key (If you get a FAIL message or update does not start, please check your MicroSD card, see above chapter PREPARATIONS)
* 05. Afterwards the device will reboot and show an upgrade screen. Please select UPGRADE ALL and confirm it on next page. Please note: If device suddenly reboots during bluetooth upgrade, please upgrade step for step in following order: MCU - HDMI - BLUETOOTH. Please restart Bluetooth update repeatedly in case of problems, do not start other updates again ).
06. After finishing all updates, the device will reboot. Please remove microSD (DO NOT restart the upgrade again!).
*** UPDATE OF USB RSE/ CD/DVD DRIVE (OPTIONAL, only via RSE USB, only needed if USB RSE is used) ***
01. Insert the microSD to an USB Adaptor and insert it to RSE USB connector on the back of the device (or extract SD.ZIP to an USB key). Start and confirm upgrade with UPGRADE ALL. Afterwards the device will reboot. Please remove USB device (DO NOT restart the upgrade again!)
Please compare installed software versions with the given versions in the CHANGES text file. We suggest to do FACTORY RESET after update.
CONGRATULATIONS! YOUR DEVICE IS NOW UP TO DATE! IF YOU EXPERIENCE ANY PROBLEMS WITH THE UPDATE DO NOT HESITATE TO CONTACT US AT
[email protected]
Click to expand...
Click to collapse
Hello , can you provide link to download the 940 firmware? thanks!
Hello!
I am having trouble updating my MCU. I've been randomly losing this driver for a while now. After starting the car, the radio has a problem with starting (android works fine, no sound from the radio) when the MCU starts, the version is unknown. After 5 minutes, the device resets, sometimes the MCU will load and everything works until the car is turned off again.
During the update (SD Card FAT32, empty only with the original files from the joying blog - Trying few others), the information that SDCARD cannot be mounted
It goes to the line where the STM32UD was updated correctly, then the line with the description: "2019.09.07 10:40:57 JY_53_C63L_H32P48F64_Ver: 1.0" - the device is locked here, nothing happens - after 5 minutes, restart the device and loop.
How the device works properly MCU Version is:
2019.09.07 10:40:57 JY_53_C63L_H32P48F64_Ver: 1.0
Any factory reset not working.
CPU Info:
Intel X86_Octa-Coire 1.8Ghz [email protected] + 32 GB
Android 8.1
What should I do, what file should I use? Radio is:
Joying JY-UO135N4G
I don't speak perfect English, I use a translator. For thorough help, sending any files, I am able to use a grant. I am asking for help in solving the problem.
I am asking for information which data is still needed to solve the problem. The device is rotated.
After struggling to start the device, I did not have an MCU, I used Joying Extra Tool and the option -Rebot Option - Soft Reboot (Gui only, sufficient for all apk replacements)
After starting the car, the panel LEDs light up for 2 seconds and then they turn off, the device usually starts after a few minutes, the vehicle's logo is displayed with a countdown from 5 to 0, the device stops on the number 0. I have to hold power off and manually reset the device, then Andorid is charging correctly.
Twice after using it, the device started working properly. The MCU showed up in the settings.
System info:
Kernel: #451 SMP PREEMPT FRI MAR 29 2019
Platform: (24)6313 LF Full band carplay
touch: 911_1060(263efcda)E:0
APP 1024x600 2019-11-28 15:50:42
System 2019-11-28 09:40:06 Thursday
I recently purchased one of those Chinese Android head unit to replace the stock Honda factory stereo (6-disc CD) in my 2008 Honda CR-V. This unit was sold on Amazon and the seller actually included the necessary bracket/frame to replace the original factory stereo. It was marketed as "Android 10 Car Radio for Honda CRV 2007-2011, 9 Inch Touch Screen 2G RAM 32G ROM Stereo Bluetooth WiFi GPS FM Support Mirror Link with Dual USB."
From what I could extract from the various screens, my HU is:
FF-5000 (Alps) as reported by Google
HMI: JC.D.Q.F.3.01.2021.05.21.08.30
MCU: TS907.190518(H)
Build number:
full_8227L_demo-userdebug 10 011019 1571038753 userdebug
Custom build version:
alps-mp-01.mp5
Kernel version
3.18.79 (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05))
The actual installation went fine with a reverse camera (I had "professional help") but I ran into three issues with the operational aspects of the HU.
Issue #1: I had logged into my Google account to access the Play Store, and it required me to enter a 4 digit PIN. This led to the PIN being stuck on the HU even when I had removed my Google Play account and each time the HU reboots or when I start the car, it prompts me to enter the PIN. A search here on XDA yielded some posts about installing a third-party app to remove the PIN settings which were hidden (see https://forum.xda-developers.com/t/remove-lock-screen-from-android-head-unit.3929076/post-85394787) but I couldn't find the aforementioned app and in the end, I was able to resolve the PIN enabled lock screen by doing a full factory reset/recovery. This was done by tapping the screen with FIVE fingers while the HU was booting up and having it to to "ROM recovery mode."
Issue #2: My unit seems to have really bad FM radio reception; it doesn't seem to pull in any stations at all. The seller had me try changing the "IC Type" in the hidden settings but none worked. Did anyone had any issues with the poor radio reception and what did you had to do resolve it? Replace the unit with a new one? Buy an amplifier? The cables to the FM antenna are connected.
Issue #3: Because of the PIN and poor FM radio reception issue, the seller recommended that I update the firmware and he sent me the firmware (only took several attempts). The filename was "8227L_8众越创UI军灿-国外10_v20_20210521.zip" and there were two files in the zip: 8227L-8.bin and 8227L-8.upd. The seller kept saying to copy it to a SD card and install but the head unit has NO SD card slot. There is a USB cable (two, actually) provided and trying multiple SD card readers and adapters and even USB flash drives and formatting them as exFAT, FAT, FAT32 or even NTFS doesn't seem to work. When I plug in the SD card or USB flash drive and tap the screen while it's booting up, the message on the screen says:
detected
Fail, please check usb and files...
So what does this actually mean? Does it imply that it found a USB flash drive/SD card but can't read it? This part is the most frustrating aspect trying to figure out why I can't get the damn firmware updated because it doesn't seem to recognize the USB SD/flash drive connection. Do I even need to update the firmware in the first place, with what I currently have or is mine outdated?
One disadvantage of doing the full factory reset/ROM recovery: I lost the "IGO Navigation" app, sample music and video files and not sure what else that came with the unit. Oh well.
Appreciate any help!
Thanks!
Hi there, I'm stuck in the exactly same situation! Let's see if someone can help us.
I had this problem months ago (could not remove Google PIN prompt, did a factory reset, lost iGO navigation). I asked the seller to send me the iGO pack to install it again, but he keeps sending me a newer iGO version that won't launch on my current system. So I thought about updating firmware. The seller sent me the 8227L_最新(一体机用).zip file to update firmware, and I put the two files in the root of a working USB FAT32 pendrive. But when the updating process starts, I get the "please check usb and files message". So yeah, same here.
Hi to all ! I managed to solve my problems with 8227L ALPS 5500 device with new software and with XTRONS branded one. I have a whole post about it:
https://forum.xda-developers.com/t/alps-ff5000-head-car-unit-help-with-firmware.4167669/page-8
link for XTRONS software is here : https://drive.google.com/file/d/1AJ...0eahij8uNzCGHh5daHWrQqohcOjLWstqtsGZANG7aw3-Q
Udde_ said:
I had this problem months ago (could not remove Google PIN prompt, did a factory reset, lost iGO navigation). I asked the seller to send me the iGO pack to install it again, but he keeps sending me a newer iGO version that won't launch on my current system. So I thought about updating firmware. The seller sent me the 8227L_最新(一体机用).zip file to update firmware, and I put the two files in the root of a working USB FAT32 pendrive. But when the updating process starts, I get the "please check usb and files message". So yeah, same here.
Click to expand...
Click to collapse
I lost iGO aswell and manged to obtain that from sellers cloud , ALL ! iGo app was only downloaded from Google playstore, rest is downloaded from cloud (maps - updated till 05/2021, license, etc.). I'm having this on my SD card on MAP slot on device just in case not to loose it again.
Hello, I still have the same problem as you.
Detected
Fail, please check USB and files
Did you find a solution?
tedmusic88 said:
Hello, I still have the same problem as you.
Detected
Fail, please check USB and files
Did you find a solution?
Click to expand...
Click to collapse
In my case the problem was that I was using a Mac to format the pendrive and copy the files. When I changed to a Windows PC, formatted and copied the files, the problem was gone. Cheers
I tried, still the same problem.
My PC is on Windows 10.
tedmusic88 said:
I tried, still the same problem.
My PC is on Windows 10.
Click to expand...
Click to collapse
Try with SD card formated with FAT 32 sys and default settings if you have slot for SD cards.
Anton TNT said:
Try with SD card formated with FAT 32 sys and default settings if you have slot for SD cards.
Click to expand...
Click to collapse
I finally succeeded by formatting the USB drive and extracting the zip with my Android smartphone. My windows pc apparently has a problem.
tedmusic88 said:
I finally succeeded by formatting the USB drive and extracting the zip with my Android smartphone. My windows pc apparently has a problem.
Click to expand...
Click to collapse
Me pasaba lo mismo, siempre decía "Fail, please check USB and files", al final desde windows quité el check de formato rápido y el dispositivo actualizó.
English:
The same thing happened to me, it always said "Fail, please check USB and files", in the end from windows I removed the quick format check and the device updated.
Gracias! Thanks!
onedollarinmywallet said:
I recently purchased one of those Chinese Android head unit to replace the stock Honda factory stereo (6-disc CD) in my 2008 Honda CR-V. This unit was sold on Amazon and the seller actually included the necessary bracket/frame to replace the original factory stereo. It was marketed as "Android 10 Car Radio for Honda CRV 2007-2011, 9 Inch Touch Screen 2G RAM 32G ROM Stereo Bluetooth WiFi GPS FM Support Mirror Link with Dual USB."
From what I could extract from the various screens, my HU is:
FF-5000 (Alps) as reported by Google
HMI: JC.D.Q.F.3.01.2021.05.21.08.30
MCU: TS907.190518(H)
Build number:
full_8227L_demo-userdebug 10 011019 1571038753 userdebug
Custom build version:
alps-mp-01.mp5
Kernel version
3.18.79 (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05))
The actual installation went fine with a reverse camera (I had "professional help") but I ran into three issues with the operational aspects of the HU.
Issue #1: I had logged into my Google account to access the Play Store, and it required me to enter a 4 digit PIN. This led to the PIN being stuck on the HU even when I had removed my Google Play account and each time the HU reboots or when I start the car, it prompts me to enter the PIN. A search here on XDA yielded some posts about installing a third-party app to remove the PIN settings which were hidden (see https://forum.xda-developers.com/t/remove-lock-screen-from-android-head-unit.3929076/post-85394787) but I couldn't find the aforementioned app and in the end, I was able to resolve the PIN enabled lock screen by doing a full factory reset/recovery. This was done by tapping the screen with FIVE fingers while the HU was booting up and having it to to "ROM recovery mode."
Проблема №2: мій пристрій, здається, має дуже поганий прийом FM-радіо; це, здається, не залучає жодної станції взагалі. Продавець попросив мене спробувати змінити "Тип IC" у прихованих налаштуваннях, але нічого не спрацювало. Чи були у когось проблеми з поганим радіоприйманням і що вам потрібно було зробити, щоб їх вирішити? Замінити блок на новий? Купити підсилювач? Кабелі до FM-антени підключені.
Проблема №3: через PIN-код і поганий прийом FM-радіо продавець порекомендував мені оновити мікропрограму, і він надіслав мені мікропрограму (потрібно було лише кілька спроб). Файл мав назву "8227L_8众越创UI军灿-国外10_v20_20210521.zip", а в архіві було два файли: 8227L-8.bin і 8227L-8.upd. Продавець постійно казав скопіювати його на SD-карту та встановити, але головний пристрій не має слота для SD-карти. Існує USB-кабель (насправді два), і спробувати кілька пристроїв для читання SD-карт, адаптерів і навіть USB-флеш-накопичувачів і відформатувати їх як exFAT, FAT, FAT32 або навіть NTFS, здається, не працює. Коли я підключаю SD-карту або USB-накопичувач і торкаюся екрана під час завантаження, на екрані з’являється таке повідомлення:
виявлено
Помилка, перевірте USB і файли...
Отже, що це насправді означає? Чи означає це, що він знайшов флеш-накопичувач USB/SD-карту, але не може його прочитати? Ця частина є найбільш розчаровуючим аспектом, намагаючись з’ясувати, чому я не можу оновити прокляту мікропрограму, оскільки вона, здається, не розпізнає підключення USB SD/флеш-накопичувача. Чи потрібно мені взагалі оновлювати мікропрограму за допомогою того, що я зараз маю, чи моє застаріло?
Один недолік виконання повного скидання до заводських налаштувань/відновлення ПЗУ: я втратив програму «IGO Navigation», зразки музичних і відеофайлів і не знаю, що ще постачається з пристроєм. Що ж, добре.
Будемо вдячні за
Click to expand...
Click to collapse
onedollarinmywallet said:
I recently purchased one of those Chinese Android head unit to replace the stock Honda factory stereo (6-disc CD) in my 2008 Honda CR-V. This unit was sold on Amazon and the seller actually included the necessary bracket/frame to replace the original factory stereo. It was marketed as "Android 10 Car Radio for Honda CRV 2007-2011, 9 Inch Touch Screen 2G RAM 32G ROM Stereo Bluetooth WiFi GPS FM Support Mirror Link with Dual USB."
From what I could extract from the various screens, my HU is:
FF-5000 (Alps) as reported by Google
HMI: JC.D.Q.F.3.01.2021.05.21.08.30
MCU: TS907.190518(H)
Build number:
full_8227L_demo-userdebug 10 011019 1571038753 userdebug
Custom build version:
alps-mp-01.mp5
Kernel version
3.18.79 (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05))
The actual installation went fine with a reverse camera (I had "professional help") but I ran into three issues with the operational aspects of the HU.
Issue #1: I had logged into my Google account to access the Play Store, and it required me to enter a 4 digit PIN. This led to the PIN being stuck on the HU even when I had removed my Google Play account and each time the HU reboots or when I start the car, it prompts me to enter the PIN. A search here on XDA yielded some posts about installing a third-party app to remove the PIN settings which were hidden (see https://forum.xda-developers.com/t/remove-lock-screen-from-android-head-unit.3929076/post-85394787) but I couldn't find the aforementioned app and in the end, I was able to resolve the PIN enabled lock screen by doing a full factory reset/recovery. This was done by tapping the screen with FIVE fingers while the HU was booting up and having it to to "ROM recovery mode."
Issue #2: My unit seems to have really bad FM radio reception; it doesn't seem to pull in any stations at all. The seller had me try changing the "IC Type" in the hidden settings but none worked. Did anyone had any issues with the poor radio reception and what did you had to do resolve it? Replace the unit with a new one? Buy an amplifier? The cables to the FM antenna are connected.
Issue #3: Because of the PIN and poor FM radio reception issue, the seller recommended that I update the firmware and he sent me the firmware (only took several attempts). The filename was "8227L_8众越创UI军灿-国外10_v20_20210521.zip" and there were two files in the zip: 8227L-8.bin and 8227L-8.upd. The seller kept saying to copy it to a SD card and install but the head unit has NO SD card slot. There is a USB cable (two, actually) provided and trying multiple SD card readers and adapters and even USB flash drives and formatting them as exFAT, FAT, FAT32 or even NTFS doesn't seem to work. When I plug in the SD card or USB flash drive and tap the screen while it's booting up, the message on the screen says:
detected
Fail, please check usb and files...
So what does this actually mean? Does it imply that it found a USB flash drive/SD card but can't read it? This part is the most frustrating aspect trying to figure out why I can't get the damn firmware updated because it doesn't seem to recognize the USB SD/flash drive connection. Do I even need to update the firmware in the first place, with what I currently have or is mine outdated?
One disadvantage of doing the full factory reset/ROM recovery: I lost the "IGO Navigation" app, sample music and video files and not sure what else that came with the unit. Oh well.
Appreciate any help!
Thanks!
Click to expand...
Click to collapse
I have the same device. Did you manage to flash the device? Could you please give a valid link to the firmware file?
View attachment 5560843
Hello there, wish you all a great week!
Need u r help.
I have a Radio with a Allwinner T3 inside running android 7.1.1.
I was trying some settings like : ext speed / usb speed and after a reboot, the unit´s screen is now "Black" ...it has backlight but shows no Android logo whatsoever!
The radio tuner display is on, but has no sound and of course no android.
Volume up down turning button works
Bluetooth is not visible!
Tried to use " he sun8iw11p1" .imf file but looks like the The "Phoenix Suite" does not recnognise the device
Also Tried "Phoenix card" but am not able to format the card : I aways get and empty folder after the format
Any helpfull sould could help please?
Some pictures attached...