Related
Phone fixed, please delete the thread.
3S0PHAGOOS said:
I changed my ROM from stock to 4.4.2 ROM but I got so many issues so changed back to stock ROM, but my LG G2 only has now only 10gb of internal memory.. [I got 32gb lg g2] Now, i tried the instruction from the guy here
http://forum.xda-developers.com/showthread.php?t=2470207&page=3
and also this
http://forum.cyanogenmod.com/topic/...s-on-internal-storage/page__st__20#entry67870
I tried to do the steps as instructed but the result is not the same as mine and then i just exit ADB... then i restart my phone and booomm...
my phone died can't on at all even on download mode... when i try download mode it's just USB Not recognize... please help me ((((
Click to expand...
Click to collapse
Try connecting the phone to a wall charger for 15 mins,and then power up the phone.
nimrodsv said:
Try connecting the phone to a wall charger for 15 mins,and then power up the phone.
Click to expand...
Click to collapse
didn't work, as expected
3S0PHAGOOS said:
didn't work, as expected
Click to expand...
Click to collapse
At the second thread its for HTC incredible, i hope you didnt flashed anything from there right?
Honestly i have no idea what you can do, but trying to eliminate some of the cases..
EDIT: you should try the first method ( http://forum.xda-developers.com/showthread.php?t=2470207&page=3 ) when using this files: https://www.dropbox.com/sh/3pqceuaqsji0dqn/nvR20mLqMF
if that what you did and it didn't worked im guessing that flashing the firmware wont help, but there are wiser people than me to help you, just wait for their input
nimrodsv said:
At the second thread its for HTC incredible, i hope you didnt flashed anything from there right?
Honestly i have no idea what you can do, but trying to eliminate some of the cases..
EDIT: you should try the first method ( http://forum.xda-developers.com/showthread.php?t=2470207&page=3 ) when using this files: https://www.dropbox.com/sh/3pqceuaqsji0dqn/nvR20mLqMF
if that what you did and it didn't worked im guessing that flashing the firmware wont help, but there are wiser people than me to help you, just wait for their input
Click to expand...
Click to collapse
I can't flash anymore, My LG G2 is completely dead, can't get into recovery and download mode, if I tried going to download my pc just say "USB NOT RECOGNIZED"
I've used the following to completely restore my phone and untrip the root checker...
Verizon: http://forum.xda-developers.com/showthread.php?t=2448960
Others: http://forum.xda-developers.com/showthread.php?t=2432476
Xyriin said:
I've used the following to completely restore my phone and untrip the root checker...
Verizon: http://forum.xda-developers.com/showthread.php?t=2448960
Others: http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
did your phone totally bricked when you did it? or you can still go to the download mode?
cause mine is totally can't on.
Do you have the LG bootlogo coming up, if so try this:
(Something similar happened to mine, and I hope this will help.)\
Turn off phone, then when off, hold down power and volume down button until it reaches the LG logo and then release and hold it down again, if that doesn't work, when just hold it down until you see a screen that says something like: Hard reset/ factory reset. For me it took me to my recovery screen, where I just flashed a older ROM onto it, and you should be fine. I then later flashed a recovery file. I hope this helps, and if you need it any clearer, just reply :fingers-crossed:
If it's saying usb not recongized I'd recommend installing the proper drivers for your specific model. Which model do you have since you didn't specifying? Also, dead or charged your phone should boot download mode with volume up being held and plugging the phone in via usb to your computer.
---------- Post added at 08:22 PM ---------- Previous post was at 08:21 PM ----------
If it's Verizon, follow that posted method above correctly. Check for correct com port numbers and make sure replacing the dll file your in the c: drive and not just in your download folder.
hiddenfive said:
Do you have the LG bootlogo coming up, if so try this:
(Something similar happened to mine, and I hope this will help.)\
Turn off phone, then when off, hold down power and volume down button until it reaches the LG logo and then release and hold it down again, if that doesn't work, when just hold it down until you see a screen that says something like: Hard reset/ factory reset. For me it took me to my recovery screen, where I just flashed a older ROM onto it, and you should be fine. I then later flashed a recovery file. I hope this helps, and if you need it any clearer, just reply :fingers-crossed:
Click to expand...
Click to collapse
My phone is completely off
ceredics said:
If it's saying usb not recongized I'd recommend installing the proper drivers for your specific model. Which model do you have since you didn't specifying? Also, dead or charged your phone should boot download mode with volume up being held and plugging the phone in via usb to your computer.
---------- Post added at 08:22 PM ---------- Previous post was at 08:21 PM ----------
If it's Verizon, follow that posted method above correctly. Check for correct com port numbers and make sure replacing the dll file your in the c: drive and not just in your download folder.
Click to expand...
Click to collapse
I have the D802, I already installed the drivers.
If I'm going to go to download mode, It says USB not Recognized and my phone is completely off.
I don't have too much experience with that model so hopefully someone else spying has more information. Sorry buddy.
There is no bootlogo at all? Not even when you turn it on? Try plugging it into a wall charger and if anything happens, also try changing your COM # to 41, if it isn't its Device Manager<Ports (COM & LPT), right click< properties< port settings< advanced..< COM 41, this was from this article I will link right here: http://forum.xda-developers.com/showthread.php?t=2582142
Hope this helps :good:
@3S0PHAGOOS how you did the fix?
cpaixao said:
@3S0PHAGOOS how you did the fix?
Click to expand...
Click to collapse
yes please enlighten us....I am going through the same process and I can not turn it on at all. NOthing comes on...
Send it to me, but if I fix it I get to keep the phone. Right?
Sent from my SM-T210R using XDA Premium 4 mobile app
3S0PHAGOOS said:
Phone fixed, please delete the thread.
Click to expand...
Click to collapse
How did you fix it?
Those experiencing this problem could try this
https://www.youtube.com/watch?v=E7zbs6of_4I
Btw, you should share the solution for those who are in the same situation.
I tried going on Reddit, but they never answered my question so I thought you guys could help me out.
So, I just got my tablet today, and this was my second time ever flashing anything. I tried to flash it via Odin. Didn't work. Ended up getting stuck on the download screen on the tablet and the program wasn't really doing anything on my computer, so I figured it froze and I disconnected the tablet from the computer. I rebooted the tablet. It ended up booting into the recovery screen. It says "Firmware upgrade encountered an issue. Please select recovery mode in Kies, and try again." So I figured I would try it. I downloaded Kies 3, and connected the device. No success. Said the device isn't supported in Kies 3. So I downloaded just regular Kies, and connected the tablet. It connects and disconnects about 3 times and then it will attempt to make a connection forever with no success. I just don't know what to do and need help. I can kik, skype, message you, whatever will help me unbrick this stupid tablet. lol. Also, I can't go into download mode, so I can't stockrom it I don't think
Could you guys help me out? It'd be much appreciated. Thank you.
PS: I can't even ****ing get Odin to even recognize that the device is even there.
sirplzcalmdown said:
I tried going on Reddit, but they never answered my question so I thought you guys could help me out.
So, I just got my tablet today, and this was my second time ever flashing anything. I tried to flash it via Odin. Didn't work. Ended up getting stuck on the download screen on the tablet and the program wasn't really doing anything on my computer, so I figured it froze and I disconnected the tablet from the computer. I rebooted the tablet. It ended up booting into the recovery screen. It says "Firmware upgrade encountered an issue. Please select recovery mode in Kies, and try again." So I figured I would try it. I downloaded Kies 3, and connected the device. No success. Said the device isn't supported in Kies 3. So I downloaded just regular Kies, and connected the tablet. It connects and disconnects about 3 times and then it will attempt to make a connection forever with no success. I just don't know what to do and need help. I can kik, skype, message you, whatever will help me unbrick this stupid tablet. lol. Also, I can't go into download mode, so I can't stockrom it I don't think
Could you guys help me out? It'd be much appreciated. Thank you.
PS: I can't even ****ing get Odin to even recognize that the device is even there.
Click to expand...
Click to collapse
Try this and get back to us.
While booted and while it's in the bootloop hold volume up, home and power until it turns off. DO NOT let those buttons go when this happens. Keep holding them all until the first splash screen(Tab 4 or whatever it says) appears again. As soon as you see that, let go of the power button while continuing to hold vol up and home.
A second or two after letting go of power you should see recovery mode. If you can get there, update the thread.
Also, you may need to reinstall the USB drivers. They are a real pain and when I have soft bricked my devices in past I found I had to install them over and over.
Good luck!
FYI, Kies is utter trash. I have never had success with it. Ever. Not even one single time with my Tab 3, Tab 4, S3 or Note 2.
---------- Post added at 11:54 PM ---------- Previous post was at 11:43 PM ----------
BTW, I suppose I should be telling you how to get into download mode. It would be easier for you to just flash a stock rom for your device.
So while your tablet is in the bootloop repeat the above steps cept instead of holding VOL UP, you hold VOL DOWN and do everything else the same.
Hopefully you will be prompted to hit volume up to get into download mode. If so, you should be set.
At that point you would get open Odin and flash the stock firmware for your device.
Remember you may need to reinstall the USB drivers a few times and this important, while installing them make sure your tablet is NOT plugged in. When they are done installing, then you plug your device in.
I hope I haven't confused you. =-}
---------- Post added 12th August 2014 at 12:03 AM ---------- Previous post was 11th August 2014 at 11:54 PM ----------
I am going to be going to bed soon. I hope you get this sorted. I'll check back tomorrow sometime.
somedays ago, i rooted my samsung galaxy grand prime (sm-g531f). which is processed by flash twrp via odin, & then flash supersu via twrp recovery.
after root, i erroneously add google account, so that frp lock was on. and top of that when i go to recovery mode its shown "custom binary blocked by frp".
so, solve this problem (bcoz i already solve this many time on many phone), i go to download mode, and i try to connect my phone via usb cable in pc, but everytime it say "usb device not recognized", but when my phone was switched on (before locked by frp), it also not recognized by usb but it was charging..
so, now:
*i cant switch on my phone
*cant go to recovery mode
*cant connect by usb cable
*i tried on many usb cables
*two laptops
*install/unistall samsung mobile drivers many times
but, nothing wasnt solved my problem..
if anyone also faced this problem, and solved this, please share your valuable process in this thread.. and help me...
Update-1: now i even change my phone's usb connector if anything could happen, but again my bad luck.. nothing happen, means usb not recognized..
Update-2: sorry i was offline or forgot to update my condition. I was tried to fix it via many mobile hardware technichian. And at last, i fixed my problem by change my whole motherboard. Bcoz, the all technichian told me that, it was my phone's cpu which have problem. For that, it couldn't recognize by any pc.
Do u have another samsung phone? If yes then try this connect that phone to your laptop or pc let it be recognised anf when thatd done removed the port from that phone and immediately connect your phone in download mode. This worked for me. If that doesnt work tell me ill look for another solution
waleeds1 said:
Do u have another samsung phone? If yes then try this connect that phone to your laptop or pc let it be recognised anf when thatd done removed the port from that phone and immediately connect your phone in download mode. This worked for me. If that doesnt work tell me ill look for another solution
Click to expand...
Click to collapse
bad luck, its not worked for me...
aamnahid said:
bad luck, its not worked for me...
Click to expand...
Click to collapse
This might be stupid but try it worked for many people. Boot your phone in download mode connect it to your pc open odin and without removing the cable remove the battery of your phone. Your screen wont go off , and if odin recognizes your phone put the battery back. It might not work but still give it a try
waleeds1 said:
This might be stupid but try it worked for many people. Boot your phone in download mode connect it to your pc open odin and without removing the cable remove the battery of your phone. Your screen wont go off , and if odin recognizes your phone put the battery back. It might not work but still give it a try
Click to expand...
Click to collapse
this was also not worked...
I have the same problem and my battery is built in unfortunately any suggestions please
Abdul.82 said:
I have the same problem and my battery is built in unfortunately any suggestions please
Click to expand...
Click to collapse
I'm having this exact problem also. I've downloaded usb drivers for Samsung, i've downloaded kies, ive tried 5 different computers and 4 different cords. No computer even recognizes it (but it does charge) and only one computer says couldn't recognize usb device.
Currently i'm stuck in the google loop of trying to login with an ID that you've previously used on this device and when i enter in the correct info it just keeps looping back to that screen, so i cant even get into the phone to debug or choose MTP connection etc.
The only reason i pulled out the grand prime and started working on it, was i rooted my s6 and s5 and i wanted to keep learning so i pulled out the grand prime and realized its powerful enough to run updated software so it doesn't have to be a paperweight anymore.
Me too I have same problem bro plz help me
FIX for FRP LOCK USB Not Working
The only way to fix that I have gotten to work is to download the stock firmware and Flash using ODIN. I had to try a few different cords but it will eventually work!! Keep trying!! I did the BL the AP the CSC and the CP, went into download mode and ONLY STOCK FIRMWARE works ok!
---------- Post added at 09:51 PM ---------- Previous post was at 09:49 PM ----------
DionWhite33 said:
The only way to fix that I have gotten to work is to download the stock firmware and Flash using ODIN. I had to try a few different cords but it will eventually work!! Keep trying!! I did the BL the AP the CSC and the CP, went into download mode and ONLY STOCK FIRMWARE works ok!
Click to expand...
Click to collapse
it took me a few minutes to figure this out after flashing Root with CF auto didnt work nor did TWRP. So I tried the Samsung Smartswitch and no luck..
hi ,did you find a solution to the frp lock and usb not recognising?
Hi,
I was using CM13 based Nuclea OS. Tried to Lock the bootloader using the tool provided in this forum. But after that, the phone kep on starting on and off continuously and showing only Zuk Z1 logo after each boot. Then I pressed Vol UP + Vol Down + Power button for some time and the phone switched off. Now I am not able to switch it on. Tried by holding all 3 buttons and power button alone as well. Battery was 90% when I did this. Any clue?
Thanks,
Sarin
Somehow I turned the phone on (tried multiple key combinations and one of them worked). But now the Phone is in a boot loop again, ie. The Logo and 'Powered by Android' message appears after a vibration and then it switches off. This is being coontinued for the past 8 hours.
That is because u have wiped all of ur phones data and phone is bricked now
..Try connecting to pc and install Twrp recovery by going to fastboot
Harijayan994_ said:
That is because u have wiped all of ur phones data and phone is bricked now
..Try connecting to pc and install Twrp recovery by going to fastboot
Click to expand...
Click to collapse
Fastboot was not detecting the phone as it's restarting continuously. Some how I switched off the phone (I Guess I pressed and hold Power button for a very very long time and then released). Then installed ZUI Version using QFIL. Did lot of search to get the Diag Port drivers and after that it detected and installed software.
Now trying to install Original CM 12.1 OS.
Coming to the real problem why I tried to lock boot loader - Now a days all apps started checking whether phone is rooted or not I guess. It's not allowing me to install the SBI Pay App or the new IRCTC App in India. (Though Root is disabled in settings). So is there a way to install CM13/CM14 without rooting the phone.
You can go to developmee option and there is an optiom for enabling root
.. enable it and enjoy apps
I guess you got me wrong. Apps gives error that 'Your phone is rooted, Please un-root to continue'. This shows up irrespective of Root is enabled or disabled in Developer options.
sarincv said:
Fastboot was not detecting the phone as it's restarting continuously. Some how I switched off the phone (I Guess I pressed and hold Power button for a very very long time and then released). Then installed ZUI Version using QFIL. Did lot of search to get the Diag Port drivers and after that it detected and installed software.
Now trying to install Original CM 12.1 OS.
Coming to the real problem why I tried to lock boot loader - Now a days all apps started checking whether phone is rooted or not I guess. It's not allowing me to install the SBI Pay App or the new IRCTC App in India. (Though Root is disabled in settings). So is there a way to install CM13/CM14 without rooting the phone.
Click to expand...
Click to collapse
Brother! There are a lot of Noobs here! (Myself one of them!). Now somehow you got saved! You took the time and toil to find a method. So I request you to kindly specify how you did that coz if anyone else get the same problem your post will be a life saver!
Hope you'll take the trouble to explain, type and provide links! But definitely if you do, one or the other guy will thank you with all this heart!
---------- Post added at 05:13 PM ---------- Previous post was at 05:10 PM ----------
sarincv said:
I guess you got me wrong. Apps gives error that 'Your phone is rooted, Please un-root to continue'. This shows up irrespective of Root is enabled or disabled in Developer options.
Click to expand...
Click to collapse
And yes... There is a way for that... Install Xposed. And try RootCloak... It's a root hider app. If it works then great. If not, let me know. There is another workaround.
Followed this tutorial to Flash ZUI Version. But for the Drivers I forgot which link I used. I can upload it to Google Drive and post it here.
http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
sarincv said:
Followed this tutorial to Flash ZUI Version. But for the Drivers I forgot which link I used. I can upload it to Google Drive and post it here.
http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
Click to expand...
Click to collapse
Alright bro... Then upload it and share the link please...
Hey guys, need some help here. I have M1 pro European version and just kind of bricked it:
-The screen stays black, I think system is booting because I can hear unlock click if I press the power button. Also notification led indicates charging when connected.
-in fastboot mode the screen is black too, but fastboot sees the device, though the name is different than before the brick.
-In recovery all I can see is black screen.
Now, here's how this happened:
-I got the phone, updated firmware to 323
-Unlocked successfuly with unofficial unlock
-Tried installing TWRP to no avail - The process seemed to go through fine, but no TWRP, just stock Asus recovery. Tried multiple times, tried rebooting straight to recovery from fastboot, tried on different computers. Weird thing I noticed was that write time in fastboot during the process was like 0.001s, which led me to believe it thought it was writing TWRP, but really wasn't for some reason.
-Then I decided to flash fastboot firmware using this guide: https://forum.xda-developers.com/as...ow-to/guide-revert-to-stock-rom-lock-t3798420
-It started flashing, but during the process I noticed again that all the write times
were super low like 0.001s, which made me expect the worst, and well, here I am now.
It's the first time I have so many problems with rooting a phone. Any help is greatly appreciated, I hope I can fix this considering it kinda works in fastboot mode.
Thanks in advance and have a great day.
Not really an expert but there are problems flashing this phone via usb 3.0 port. If you are using one try a usb 2.0 one.
gr8guzzler said:
Not really an expert but there are problems flashing this phone via usb 3.0 port. If you are using one try a usb 2.0 one.
Click to expand...
Click to collapse
Thanks, but I tried both usb 2 and 3 and both yield same results for me.
gr8guzzler said:
Not really an expert but there are problems flashing this phone via usb 3.0 port. If you are using one try a usb 2.0 one.
Click to expand...
Click to collapse
Thanks, but I tried both usb 2 and 3 and both yield same results for me.
Not sure whether this will work (it does in some cases), try full ADB instead of minimal ADB + ASUS drivers installed from the website.
By what name does the fastboot see the device?
Hye, did you solve the problem?
Don't worry, it’s only soft bricked. All you need to do is to flash a stock service rom. Something like: WW_ZB602KL_15.2016.1805.318_20180712 or WW_ZB601KL(ZB602KL)-15.2016.1805.311-20180623. The reason it is "bricked" is because you flashed the incorrect rom for your device, actual model is important, M1 has many variants.
Try flash stock recovery through fastboot, relock ur device, then place whatever version of stock rom into microsd,
And last flash it via stock recovery
Hi sorry but how can i flash it through fastboot? I have same problem...
kothy said:
Hi sorry but how can i flash it through fastboot? I have same problem...
Click to expand...
Click to collapse
Flash stock recovery? Enter fastboot, connect Ur device to PC
Open cmd command in folder where U place the recovery.img file. Then, type "fastboot devices" to make sure Ur device detected
Then type "fastboot flash recovery (filename)"
Done
If you can see your device name when typing 'fastboot devices' you can do as said above. Could it be dead screen?
RAMBO29 said:
If you can see your device name when typing 'fastboot devices' you can do as said above. Could it be dead screen?
Click to expand...
Click to collapse
Yep, if it shows 'blablabla device' It could be dead screen
Then you can go to next step
Its not a dead screen. You just have a wrong rom/kernal/drives/firmware etc. Its a software issue.
Vico100 said:
Its not a dead screen. You just have a wrong rom/kernal/drives/firmware etc. Its a software issue.
Click to expand...
Click to collapse
i am facing the same issue but cant gent into stock recovery and cant enable usb debugging as well
any solutions.
Get into fastboot. Hold volume up and power. Even if you don't see the screen it should still go into fastboot. Check device manager on windows to see if any devices appear. The phone should vibrate when you turn it on and go into fastboot.
Vico100 said:
Get into fastboot. Hold volume up and power. Even if you don't see the screen it should still go into fastboot. Check device manager on windows to see if any devices appear. The phone should vibrate when you turn it on and go into fastboot.
Click to expand...
Click to collapse
i did that works but screen is blank or dead after flashing fastboot rom
What is your phone model and what rom did you flash?
tried this it did not work
https://forum.xda-developers.com/as...ow-to/guide-revert-to-stock-rom-lock-t3798420
---------- Post added at 10:36 PM ---------- Previous post was at 10:20 PM ----------
can you please help me... i have ZB601KL model... can do fast boot i do not know what to do next.... im stuck on the black screen... i can hear the phone booting up and starting up but its just black screen blinking... please help
---------- Post added at 10:39 PM ---------- Previous post was at 10:36 PM ----------
ASUS_X00TDB is the name of the phone when it boots up
same problem with my device. share if you find any solution.
------------------------------------------------------------------------------
fixed my device following this