Hi,
I faced this problem too often, so I ask on this forum to know if it only happens to me:
when I end the call, telephone programs stucks. In the top bar, the indication of an on going call is still there. Everything is working except telephone application. I can't open the telephone options. Even if I turn on Airplane mode, the phone logo in the top bar remains.
Any idea?
I had that problem once. Did it occur when you dialed a number not in your phone book? It turned out the prompt for saving a new dialed number was still there but I somehow couldn't access it. Perhaps turn that setting off?
no, it was an outgoing call to someone in my phonebook. (at least in my last problem)
facing the same problem. after ending a call the phone app freeze a couple of minutes and sometimes more than ten minutes
Did you installed the HTC patch to avoid the freeze ?
I didn't.
Could it be usefull there ?
This is really annoying if you have to wait 10mn before doing an another call !
Problem happened again
The problem happened again yesterday.
But worse. I was leaving a message on an answering machine. and I couldn't end the call !
Pressing the right key (end call) had no effect !
Usually in my previous problems, the other user was ending the call.
So I had to switch off the phone in comm manager !
I'm surprised that no one else faced this problem !
I tried to follow one's advice to wait then until phone gets back to normal. (release the phone icon in the top bar).
After one hour, I finaly rebooted the phone to be able to do an outgoing call.
Help !
Phone blocks during or after a call
Hello guys and girls
I had the same problem last week, a couple of times in a row, I was on the phone with a contact, after a couple of minutes I couldn't hear anything anymore and tried to end the call but no joy, a soft reset did the thing the first time, the second I waited a couple of minutes wich worked aswell. It was very annoying I must say especially as it happened 4 times in a row...
Hoping for a solution
Greetz
It seems a bug. You can press volume up/down buttons on the device itself to open the volume bar screen. After that just press somewhere on the grey area to go back to home screen. The top bar will restore from the phone application.
It's not the top bar. The phone application is completely unavailable.
We see the top bar,but the phone icon is stuck. Like if we were still on call.
I too have a similar problem.
Although I haven't particularly logged the prolems, I think that it only happens on incoming calls, and not outgoing ones.
During a phone call, the incoming sound just goes mute, and afterwards I can't hang up the call.
I reckon I have lost well over half the calls I have received because of this.
Luckily, not many people call me!!
I reckon this is a CRAP phone, and am seriously thinking of getting a REAL phone, and just using the HD as a PDA device. Good old HTC!!!!!!
I edited the title of this topic.
The phone app is really stucked : I called an answering machine, I wasn't able to end the call !
Help !
I am thinking of changing ROM.
After I got RC33 update over the air, I've been having problems answering phone calls. My phone rings, and I press the green telephone button to accept the call, this silences the ring tone, but shortly afterward it just starts up again. Pressing the green telephone button continues silencing the ring tone and it seems like the phone will answer a call at random presses. This problem seems to only come up when the screen has timed out and requires an un-lock pattern. Any help would be appreciated.
same damn thing happens with mine after the update i press the answer button and nothing happens just silences the phone....it really annoying and since the update my home screen freezes alot more
I have the Verizon G2 and just wondering if anyone else notices the incoming call screen changes. Sometimes I have the screen where the answer/decline buttons are circles and require a slide but other times I have an answer screen with big squares for answer/decline and require a press.
I can not figure out the reasoning why this screen changes formats. I just had 2 calls from the same person and each call was different.
When I'm in a call and get a 2nd call, it normally the big squares. What sucks is that when talking and the phone is on my cheek, the 2nd call comes in, turns on the display and with the huge buttons, I've answered and declined a few calls with my cheek.
I also notice with the latest update that the screen is turning on more often and my face starts hitting buttons. Mostly the clock from the statusbar notification shade, go into time settings and messes up my time. Usually I find my clock in 24hr mode. Today it was 2hours off.
I'm not sure if notifications coming in while on a call is turning the screen on or if the sensor is getting whacky. Its getting to the point where it is becoming annoying so I'm posting about it.
Anyone else notice the dual answer screen formats and having issues with being on calls and the screen turning on? I've been having to hit the power button to force the screen from coming on and launching stuff or toggling my notification stuff.
player911 said:
I have the Verizon G2 and just wondering if anyone else notices the incoming call screen changes. Sometimes I have the screen where the answer/decline buttons are circles and require a slide but other times I have an answer screen with big squares for answer/decline and require a press.
I can not figure out the reasoning why this screen changes formats. I just had 2 calls from the same person and each call was different.
When I'm in a call and get a 2nd call, it normally the big squares. What sucks is that when talking and the phone is on my cheek, the 2nd call comes in, turns on the display and with the huge buttons, I've answered and declined a few calls with my cheek.
I also notice with the latest update that the screen is turning on more often and my face starts hitting buttons. Mostly the clock from the statusbar notification shade, go into time settings and messes up my time. Usually I find my clock in 24hr mode. Today it was 2hours off.
I'm not sure if notifications coming in while on a call is turning the screen on or if the sensor is getting whacky. Its getting to the point where it is becoming annoying so I'm posting about it.
Anyone else notice the dual answer screen formats and having issues with being on calls and the screen turning on? I've been having to hit the power button to force the screen from coming on and launching stuff or toggling my notification stuff.
Click to expand...
Click to collapse
I have the exact same problem. I actually factory reset the phone to no avail. It's weird absolutely. But I've learned to live with it by not pressing the whole phone on my cheek, instead it's held at a slight angle, just the top speaker on my ear and the rest away from my face. The phone gets less dirty and there's no chance I'll press some things with my face.
I've found that if you manually turn the phone off via power button, it'll stay off. The problem is then ending the call since pulling it away won't turn on the screen.
However I am still curious about the Incoming Call screen theme. Sometimes it uses the small Circles that you click and drag while other calls use the big square button theme. It flip flops randomly.
I can't remember if the Incoming call screen would flip flop before but the screen on/off bug was introduced in 4.4.2
Anyone having this problem? All of a sudden when I either receive a call or place a call, the Call app that does the overlay locks up and the screen goes completely unresponsive. I can't answer the call (except via a bluetooth device). Likewise with hanging up. I can't press the buttons to turn on speaker -- nothing works. The notification comes up green during a call with the phone icon, but no text.
Eventually: "Call is not responding" pops up, and I'm given the options to Wait or End the app. Ending the app sees it restart immediately and become unresponsive again. Rebooting the phone or waiting for the call to disconnect are my only ways out.
Beyond frustrating! Any ideas? HELP & thanks!
-David
The call interface is randomly different when I receive an incoming call.
Sometimes it's a red oblong with decline and a green one with accept, where you have to touch one or the other. Other times it's a green phone symbol, that you slide upwards. How can I get it to just use one of these interfaces? It's driving me nuts.