I bricked my phone and I already red that I need a EDL File. Every downloadlink I can find is way to slow. It takes several hours. So my question is if someone give me a download link to an EDL file for the a2017g?
https://forum.xda-developers.com/axon-7/how-to/info-v1-2-0b10-rolling-t3759920
or take the oreo b03 slim from raysteff66
Https://forum.xda-developers.com/axon-7/development/rom-slm7-dfnr-t3896486
https://drive.google.com/file/d/1z6VxLN2S0thvYd-qxr4uTfQM-8Ji6MNQ/view?usp=drivesdk
Related
Hello,
My honor 8 lite was bricked recently and I tried almost every method to unlock but unfortunately nothing worked. I have my bootloader key also and dc phoenix for 72 hours but nothing working my way. Tried almost every update file available for my build and nothing worked. Help required from genius developers of XDA. My region is Pakistan.
Please anyone suggest me the correct firmware link and the whole procedure otherwise my money will be wasted.. bootloader is unlocked and frp locked..
I'm on it via PM, we'll post result once repaired with method used.
He's not replying now.. anyone else can help?
I replied 10 minutes ago..
Sorry I got it now
So, while your downloading firmwares, i'll post what I told you on PM.
"
Ok, so I think you did not rebrand your phone:
-You installed wrong region with FF (in fact right region but for huawei variant not honor variant). So your phone does not boot to normal mode anymore, it's normal.
-You then flashed different firmware via DC-Phoenix.
These steps alone does not rebrand your phone...
I think your honor 8 lite c185 honor variant is LA1 or L21HN (and not the huawei gr3 2017 variant).
1) Download this oreo service repair firmware 8.0.0.363(C185)*:
http://androidhost.ru/9dg
To install, you will have to boot in 'firmware mode' aka dload mode, and used an exfat formatted SDcard or USB-OTG. There is 3 flashes to do ; instructions are inside.
2)If working with this oreo service repair firmware, we'll then unlock Bootloader and bootloader's FRP, then we'll use Normal ota or twrp+HuRUpdater to update to 8.0.0.382(C185) with these 3 files:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2312/g1699/v172010/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...10/f1/full/public/update_data_full_public.zip
http://update.hicloud.com:8180/TDS/..._meafnaf/update_full_PRA-L21HN_hw_meafnaf.zip[/QUOTE]
3)OREO service repair may not work if you are still with nougat partition scheme,
if so you'll have to download a NOUGAT service repair : https://support.halabtech.com/index.php?a=downloads&b=file&c=download&id=53498
Done doing 1)
First, big .app flash via dload
Second, small . app flash via dc-phoenix as device won't boot to firmware mode
Third, big .app flash via dload
Device restored !
Honor 8 lite back alive again with oreo..
But I am going warn everyone who's new to all of this.. Don't try to update by yourself.. Get guidence from someone here and then try to update your phone only if you have bootloader unlocked and frp too..
oslo83 said:
Done doing 1)
First, big .app flash via dload
Second, small . app flash via dc-phoenix as device won't boot to firmware mode
Third, big .app flash via dload
Device restored !
Click to expand...
Click to collapse
Thank you very much for all your support..
Hi all.
I´m still searching some way to solve my problem.
What´s happaned:
was on AEX OREO, make downgrade to SLIM stock 7.1 from raystef66 = all ok. But after a couple days made magisk upgrade to 17 via twrp and after that is "death"...when I try to start my phone I can see first ZTE logo, than 3x red led, that´s all, I think after flash stockrom I lost customrecovery......?.....t I can not start to TWRP, FASTBOOD...maybe EDL working but:
When I try combo+pwr I see DFU/com4 port. So I tried guidef from raystef66 with ZTE DFU_MultiDL_A2017X_Tool = apk see my phone but still in disconect mode(conect stat) but WIN see my phone as HS USB QDlouder 9008 com 8, now I run edl tool from djkuz.
Tool see my phone, name QUALCOM HS=USB QDlouader 9008 and I tried flash edl or recovery with error = from log:
Did not receive Sahara hello packet from device miflash says can not recivie hallo pocaked.
Any new idea how to fix...?
Thx!!
trying on WIN7 pro
kraljan66 said:
Hi all.
I´m still searching some way to solve my problem.
What´s happaned:
was on AEX OREO, make downgrade to SLIM stock 7.1 from raystef66 = all ok. But after a couple days made magisk upgrade to 17 via twrp and after that is "death"...when I try to start my phone I can see first ZTE logo, than 3x red led, that´s all, I think after flash stockrom I lost customrecovery......?.....t I can not start to TWRP, FASTBOOD...maybe EDL working but:
When I try combo+pwr I see DFU/com4 port. So I tried guidef from raystef66 with ZTE DFU_MultiDL_A2017X_Tool = apk see my phone but still in disconect mode(conect stat) but WIN see my phone as HS USB QDlouder 9008 com 8, now I run edl tool from djkuz.
Tool see my phone, name QUALCOM HS=USB QDlouader 9008 and I tried flash edl or recovery with error = from log:
Did not receive Sahara hello packet from device miflash says can not recivie hallo pocaked.
Any new idea how to fix...?
Thx!!
trying on WIN7 pro
Click to expand...
Click to collapse
First: did the DFU see a com port in the config?
You do have to select the com port manually.
Second: can you boot to FTM?
Third: try another Edl package, some Edl have to be installed as a backup restore not via a straight flashing.
thx for quick answer!
1 see pic pls, in DFU com4
2 no can not get to FTM
3 tried 3x another packages...see log/pic from ZTE EDL tool...
kraljan66 said:
thx for quick answer!
1 see pic pls, in DFU com4
2 no can not get to FTM
3 tried 3x another packages...see log/pic from ZTE EDL tool...
Click to expand...
Click to collapse
Use the latest MiFlash. I've been having trouble with EDL Tool lately. Maybe it'll work. z
I'm guessing the red LED turns off as soon as you connect MultiDL correctly?
Make sure Edl tool is in the root directory of you PC or laptop drive.
EG: C:\ or D:\ as per the instructions.
Make sure you run it as admin too.
If I remember correctly the full Edl package had to be placed into the appropriate folder as per instruction (via the tool) and on the post.
@Syberclone:
I have all as you write...in root, edl package is correct/about edl package edl tool says "success = tried 4different edl package for my phone"/
I´m convinced about a port problem, log from edl tool is:
15:47:25: INFO: User wants to talk to port '\\.\COM8'
ERROR
15:47:25: {ERROR: OpenPort:5198 Failed to open com port '\\.\COM8'
I´ll try another miflash but dont believe ...:-/
just used another PC with WIN7 and now.....CHEEEEERS!!!!!!
Thx to all!
I followed the easy universal unbrick guide... it bricked my phone hard and sayd xbl.elf not found (even though it was).
I had to short the contact point to flash B10 again, now I can get into EDL without shorting the point, no display on the screen, a buzz and red light and appears to reboot over and over (blank screen).
EDL Tool does not work, anything I do it will error out saying Sahara mode. MiFlash can flash the phone, but B10 Nougat Full EDL package doesnt boot the phone properly.
What EDL package can I use? I want to unlock bootloader and root as well.
Edit: I've also downloaded ZTE_A2017GV1.2.0B06_FULL_EDL_PACKAGE_BY_TURKDEVS and its also doing the same thing as above after flashing with MiFlash in EDL mode.
Hi
Please i need help
I want to unlock bootloader and flash TWRP & Magisk on my realme 2 pro 4/64, after i flash all items, my phone was bootlop
Then i tried to relock bootloader, after that, my phone cannot boot and only showed this message.
"the current image(boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it"
how can i fix it?
note : i attached images of the problem, thats not my pictures, i save from the pther person who have the same problem. but i can find the best solution
thank you very much
flash stock recovery through fastboot. Then again install twrp custom recovery through fastboot. Then install stock zip rom by flashing through twrp. You can get stock recovery and stock rom from the following link.
https://forum.xda-developers.com/realme-3-pro/how-to/guide-to-stock-rom-stock-recovery-t3940604
fix
kisutbener said:
Hi
Please i need help
I want to unlock bootloader and flash TWRP & Magisk on my realme 2 pro 4/64, after i flash all items, my phone was bootlop
Then i tried to relock bootloader, after that, my phone cannot boot and only showed this message.
"the current image(boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it"
how can i fix it?
note : i attached images of the problem, thats not my pictures, i save from the pther person who have the same problem. but i can find the best solution
thank you very much
Click to expand...
Click to collapse
have you fixed?how
Bootloop please help asap!!
I was trying to install custom rom but I didn't took back up and wiped every thing on internal memory and also flashed stock recovery of realme 2 pro LOCKED the bootloader also I was hoping that I would be able to install stock rom by realme . But now am stuck at bootloop only realme logo appers
Basically I only have stock recovery on my phone and nothing else in the internal no OS installed bootloader is also locked so am not able to install twrp recovery to please help me install any rom .I am stucked due to lockdown no Service center is open. Please help asap??? I can't leave without my phone in this lockdown
davsagar4 said:
I was trying to install custom rom but I didn't took back up and wiped every thing on internal memory and also flashed stock recovery of realme 2 pro LOCKED the bootloader also I was hoping that I would be able to install stock rom by realme . But now am stuck at bootloop only realme logo appers
Basically I only have stock recovery on my phone and nothing else in the internal no OS installed bootloader is also locked so am not able to install twrp recovery to please help me install any rom .I am stucked due to lockdown no Service center is open. Please help asap I can't leave without my phone in this lockdown
Click to expand...
Click to collapse
Possible 100% solution, but it's paid.(800 inr)
In my case I'm fully locked (by vol down and power,vol up and power,both up down and power) i only see error..(no fastboot windows)
So to overcome this you need to pay someone some money (i paid 800,for oppo special I'd and password for 1 time),and download a compatible firmware (rom) and msm download tool in pc make sure you also have team viewer, as damn oppo won't allow you to flash firmware for free ad there is no crack for msmtool...hope this helps.. i also did this process during lockdown and learned a moral:-never relock bootloader
Qfil and other processes doesn't worked for me?
Don't wast time in crackes etc there is no official crack of realme 2 pro firmware bcoz there is always a different tool for each rom???..
I waited to fix this for 27 days.
davsagar4 said:
I was trying to install custom rom but I didn't took back up and wiped every thing on internal memory and also flashed stock recovery of realme 2 pro LOCKED the bootloader also I was hoping that I would be able to install stock rom by realme . But now am stuck at bootloop only realme logo appers
Basically I only have stock recovery on my phone and nothing else in the internal no OS installed bootloader is also locked so am not able to install twrp recovery to please help me install any rom .I am stucked due to lockdown no Service center is open. Please help asap
Click to expand...
Click to collapse
He_man_r35 said:
Possible 100% solution, but it's paid.(800 inr)
In my case I'm fully locked (by vol down and power,vol up and power,both up down and power) i only see error..(no fastboot windows)
So to overcome this you need to pay someone some money (i paid 800,for oppo special I'd and password for 1 time),and download a compatible firmware (rom) and msm download tool in pc make sure you also have team viewer, as damn oppo won't allow you to flash firmware for free ad there is no crack for msmtool...hope this helps.. i also did this process during lockdown and learned a moral:-never relock bootloader
Qfil and other processes doesn't worked for me?
Don't wast time in crackes etc there is no official crack of realme 2 pro firmware bcoz there is always a different tool for each rom???..
I waited to fix this for 27 days.
Click to expand...
Click to collapse
hey can you provide me that person's contact info?
- hello people, i have a zte axon7 a2017g , stock rom oreo , i tried to flash Android 7.1 , many roms _full edl naugat and oreo to unlock bootloader because i want to develop things for it. As of now, I can't boot into phone( system), can't get into edl mode with button combination but, i can go into dfu mode and use a tool to go in edl mode. So please help me.. i have tried miflash, multidl tool, and may other tools they give me error of firehose , or sahara protocol . i have only dfu mode then i can go by sa tool of diijkuz tool automaically to edl mode , but everytime i flashed a rom told me failure , just the first time succeed but stuck on logo screen then wheni flash it told me failure .
Have you tried to completely drain the battery?
Hi friend:
If you drain the battery completely it will be easy to enter edl.
You can use edl tools to unlock the bootloader.
What I would do would be once you have the battery drained, connect the pc and flash a stock edl nougat rom.
Once flashed and started the rom, it will be easy to unlock the bootloader, put twrp and install what you want
totmakina said:
Have you tried to completely drain the battery?
Hi friend:
If you drain the battery completely it will be easy to enter edl.
You can use edl tools to unlock the bootloader.
What I would do would be once you have the battery drained, connect the pc and flash a stock edl nougat rom.
Once flashed and started the rom, it will be easy to unlock the bootloader, put twrp and install what you want
Click to expand...
Click to collapse
Thanks for your response !!!!
yes i tried with drain batteri two times but no progress , it's just on naugat rom and stuck on logo , i tried also to unloack bootloader , it told me unloacked on the edl tool but when i boot on bootloader , the state is locked , may be because the rom naugat not flash correctly , or because it'stuck on logo .
i try with naugat b12_Full edl ,oreo b02 _fulledl , , but it told me failed this time otherwise at first naugat _b12_full edl say successfully done.
now i just can make phone on dfu mode and try with the edl tool of dijkiz to go automaticlly to edl mode and flash , but it told me failed flashing .
what i should do then !!! can u recommend to me a stock rom naugat and give me a link about it , i can flash it with edl tool and how i can directly go to edl mode because now i just have dfu mode then i use a version of edl tool make me go directly to edl mode but may be it's not work fine !!!
Ps : My problem is that am stuck on logo after downgrading from stock rom oreo b02 to naugat , shoyuld i search about a boot recovery to flash boot and boot in system or if ther is another tools or rom can i use them to solve my problem
(' sorry for my bad english )