Related
My PC won't find my Wildfire. The problem I have is that it recognices my phone as a "unknown usb device" and I won't be able to transfer stuff between the SD-card and the PC (very annoying as I can't really move music).
I'm running Cyanogen Mod (the stable released 12th of december but had this problem for a while now). It's rooted with unrevoked and the HBOOT usb drivers won't work (reinstalled vista on my pc).
So what should I do?
When you plug your wildfire in, up in the top left hand corner(on the notification bar) you should see two little icons pop-up, One will be telling you that you have connected your phone to a power source and it is now charging, the other allows you to turn on usb file transfer.
Drag down you notification bar and click the one that says something like "file transfer" and it should open a new window... there should be a button at the bottom of the page which allows you to toggle the file transferring on and off, remember to turn it off before you take your phone out, or it will bug the next time and you'll have to reboot your phone and your pc to get it working
Hope this helps,
note* if this doesn't work there is a driver you can download which might make it recognise it, but I believe the above solution should work for you!
Edit:
If you still can't find it i'll upload a screenshot when I get home
try installing the hboot drivers again.
that solved it for me when my phone wouldn't be recognised, funny thing was it stopped recognising after i was charging my auntie's ipod. LOL
I would reinstall the drivers but it doesn't show up as a "Android Device" (or what it's called) in device manager.
I don't even have HBOOT USB as an option on the bootscreen. (with the USB plugged in)
UPDATE: Installed and uninstalled HTC Sync to get the drivers. Still an unknown usb device on which I can't install the special HBOOT drivers and still no HBOOT USB on boot screen even when plugged in.
If your phone is rooted, HTC sync could be your problem.
Had the same problem.
This is how I solved it, from the HTC support page:
Tips 1:
If you cannot see the HTC Sync option when you connect your phone to the computer via USB, please follow the
Instructions below:
1. Make sure you select USB Debugging in Settings > Applications > Development before connecting your phone to the computer
2. Connect you Phone to the PC and wait 20 seconds for your phone to install HTC Sync on your phone.
3. Unplug the USB sync cable. Wait for 5 seconds. Reconnect the Phone to the PC using the USB cable.
4. Select “HTC sync” and wait for HTC Sync to recognize your Phone. This process could take up to a minute your first
time connecting to the computer.
Click to expand...
Click to collapse
Or just install pdanet on both computer and phone, it will automatically install the drivers too. After that you can easily uninstall pdanet from both computer and phone, the drivers will stay installed.
hello, I had the same problem, cm since I upgraded to, I can not sync my windows with wildfire, and I found an alternative way to synchronize your PC and the wildfire MyPhoneExplorer excellent! really good!
I'm having the same problem, I can't access my Wildfire through my PC.
My PC recognizes the device but I can't access the SD-Card as it says 'Please insert a disk'. It's just charging, no option to establish a connection to the disk drive.
I tried several things, including the USB-debug mode which didn't work out. With MyPhoneExplorer I have a connection to my phone (can see calls, messages and memory status) but when I want to view the files on my SD-Card it pops up an error message saying "OBEX protocol couldn't be initalized! Phone didn't answer'.
Please help me how to connect my Wildfire again!
gellow said:
I'm having the same problem, I can't access my Wildfire through my PC.
My PC recognizes the device but I can't access the SD-Card as it says 'Please insert a disk'. It's just charging, no option to establish a connection to the disk drive.
I tried several things, including the USB-debug mode which didn't work out. With MyPhoneExplorer I have a connection to my phone (can see calls, messages and memory status) but when I want to view the files on my SD-Card it pops up an error message saying "OBEX protocol couldn't be initalized! Phone didn't answer'.
Please help me how to connect my Wildfire again!
Click to expand...
Click to collapse
OK, i somehow figure it out by myself:
all I had to do is rebooting my device, after that everythings is working just fine! Thanks for nothing
You should have tryed that before asking. It's common sense.
Sent from my HTC Wildfire using Tapatalk
try and install HTCDriver_2.0.7.17 in the root of ur phone!
Hello.
When I connect my S4 to my pc with the USB cable. The folder is automatically opened with all my files, docuements, photo...
As a usb key...
I would like to know if it is possible to block that please ?
On my old phone, I had an option to set by default only charge the phone when connected to the pc. And if i wanted to open the files of my sd card, I had to unlock the screen of my phone and choose "use as a device", and then my files was showed on my pc.
Now with the S4 anybody can take my phone and connect it on a computer and have access to all my files. I want to change that.
Help please.
Thank you.
Hi Guys.
I have one Redmi Note 3 and I am having a problem to connect it to my pcs.
Before everything was ok. I connected the USB cable and I could transfer files between my pc and the Redmi Note 3 using My Computer.
Now, I connect the Note 3 and I cannot see the storage anymore. So, it's impossible to copy anything between pc or note 3.
I checked with several cables and different ports and in two different pcs. I cannot connect with MIPC Suite either. The Note 3 recharges normally.
I believe it's a driver version problem.
I am using Windows 10 and MIUI 7.1.6.0 Stable Version.
Thanks for all help.
Check if the drivers are updated to win10
The best way is to download them from miui.com or mi.com
Enamorado de mi Redmi Note 3 ?
English version not work.Install Chinese version
xylos9 said:
English version not work.Install Chinese version
Click to expand...
Click to collapse
My friend, thanks for your kind help. Could you post the link for us? I have no idea about chinese. Sorry
xylos9 said:
English version not work.Install Chinese version
Click to expand...
Click to collapse
Thanx mate..
Go to the Setting> Additional Setting and look for the "developer options"
if you cant see that option, go to the Setting> About phone and tap five times on "MIUI version", you'll see a little popup message "you a developer now", then go to Setting> Additional > Developer options and enable "developer options" and "USB debugging"
Hey Guys, even i faced the same problem but it got fixed so easily than i ever thought . As soon as you connect your phone to laptop using data cable, you will find an option called " Touch for more option" in your phone, when you touch on that option, it will prompt you with three option > Charging only , Thasfer files (MTP) and Transfer photos (PTP), when you click on these you will be able to see Internal storage, then you can copy paste whatever files you want Hope it helps.
Even after usb debugging, i can not see the storage in my pc
I had same issue with my Xiaomi Redmi 3s prime as i can not get it to connect to my PC but got it fixed .
1. enable developer option and enable USB debugging
2. reinstall MTP driver on windows using wpdmtp.inf in windows folder while your phone is connected
read full details here: [Solution] Xiaomi Phone not connecting to PC via USB
Thank you so much. I tried all the above, your suggestion worked
Perfect, Thanks it worked !
This matter works for me ! thanks
yes, it works
Thanx Alot
Thnx Alot buddy
very very thankful
Tried everything
Visited MI service center
Contacted their helpline
Tried every website
Nthing worked
Bt ur small Suggestion worked perfectly
Was trying it since last 3 days
thanks alot bro..it also worked for me
Solution to Xiaomi Phone not connecting to PC via USB
Enable developer option: go to settings>About Phone and tap MIUI version about 6 times then you will see a pop up notification that you are now a developer.
Enable USB debugging: after enabling developer option you should go to settings>additional settings>Developer options then enable USB debugging
Now connect your xiaomi phone to your PC via USB cable
On your computer go to PC>C drive>windows >INF > and look for wpdmtp.inf (make sure your xiaomi phone is connect via usb) then right click on the file wpdmtp and click install with your phone plugged in.
Note: when you connect via cable you have an option on the top notification to select either to charge only, transfer files or photos. you should select transfer file.
After this steps your Xiaomi Phone will be detected by your computer and you can access the internal memory.
you can share this steps with friends experiecing the same problem of xiaomi phone not connecting to pc
hello guys,
my red mi note 3 phone is not connecting to the pc for the recent update version 8.1.1.0 to windows 10.
I tried installing wpdmtp.inf file on windows but I get a prompt saying, INF file you have selected doesn't support this method of installation
can't connect in pc for flashing my phone
same like my redmi note 1w can't connect to my pc (no detect anything),
first i think problem with usb port in phone cz i played game with charging, but im try to jumper usb in hardware it's not problem solved. and now my phone bricked i can't do anything.... try to flashing with sp flashtool but phone not connect to pc....
my phone just in recovery mode....latest i'm try to update.zip in recovery mode always failed cz update.zip is not detect on sd card (file must in internal memory)...
pls help me
cyrilcyril70 said:
Solution to Xiaomi Phone not connecting to PC via USB
Enable developer option: go to settings>About Phone and tap MIUI version about 6 times then you will see a pop up notification that you are now a developer.
Enable USB debugging: after enabling developer option you should go to settings>additional settings>Developer options then enable USB debugging
Now connect your xiaomi phone to your PC via USB cable
On your computer go to PC>C drive>windows >INF > and look for wpdmtp.inf (make sure your xiaomi phone is connect via usb) then right click on the file wpdmtp and click install with your phone plugged in.
Note: when you connect via cable you have an option on the top notification to select either to charge only, transfer files or photos. you should select transfer file.
After this steps your Xiaomi Phone will be detected by your computer and you can access the internal memory.
you can share this steps with friends experiecing the same problem of xiaomi phone not connecting to pc
Click to expand...
Click to collapse
Thanks! This procedure worked for me on windows 10
Hey guys,I hope that all the awesome people here can help me to solve a huge Problem.
My GF had a Galaxy S5 Neo,she thought it would be a great idea to drop it directly on the screen so it broke and won't show anything anymore.
No we need to backup some important files from that device.
Gladly I was able to remove the lockscreen protection with her Samsung Account,but still not able to do more.
The device is on the latest official update,not rooted and no USB debugging enabled.
So I tried to get in recovery and use adb,witch will work every now and than,but I found out that the adb in stock recovery is limited,so now way to do anything there.
If I had enabled USB debugging,I could easily use visor to controll the device.
If I connect it via USB to my PC,it shows up,but as an empty device.
And I can't change the USB mode,because screen is completely dead.
Can I change the USB mode without the screen?
Can I enable USB debugging without the screen?
If I could change at least the USB mode,that could help out at least a little.
Long story short,I need an way to backup file from that thing.
If there is a solution for this,you guys would really help me out.
K-Town Rules said:
Hey guys,I hope that all the awesome people here can help me to solve a huge Problem.
My GF had a Galaxy S5 Neo,she thought it would be a great idea to drop it directly on the screen so it broke and won't show anything anymore.
No we need to backup some important files from that device.
Gladly I was able to remove the lockscreen protection with her Samsung Account,but still not able to do more.
The device is on the latest official update,not rooted and no USB debugging enabled.
So I tried to get in recovery and use adb,witch will work every now and than,but I found out that the adb in stock recovery is limited,so now way to do anything there.
If I had enabled USB debugging,I could easily use visor to controll the device.
If I connect it via USB to my PC,it shows up,but as an empty device.
And I can't change the USB mode,because screen is completely dead.
Can I change the USB mode without the screen?
Can I enable USB debugging without the screen?
If I could change at least the USB mode,that could help out at least a little.
Long story short,I need an way to backup file from that thing.
If there is a solution for this,you guys would really help me out.
Click to expand...
Click to collapse
Hey, i have similar problem, i cant unlock the phone so i have empty device at computer, i was wondering if you have any news on it
You Need OTG
Assuming
- you have stock 6.0.1 and
- you have enabled Developer options,
Here is an easy way:
1. Wait for boot to complete.
2. Once you feel like you're at the Touchwiz home screen, attach a keyboard to your S5 Neo.
3. On your keyboard, press Windows + N (Quick Settings tray).
4. Press Tab twice and Enter (Settings).
5. Keep on pressing Down Arrow for 5 sec.
6. Up Arrow one time and Enter (Developer options).
*** You can now (A) enable USB debugging and/or (B) change USB configuaration to MTP ***
7(A). Down Arrow * 7 times and Enter (USB debugging).
7(B). Down Arrow * 22 and Enter (USB configuration).
8(A). Right Arrow and Enter to allow USB debugging (OK).
8(B). Press Down Arrow and Enter (MTP)
9(A). Connect your phone to your PC *** You MUST keep your keyboard connected ***
9(B). Connect your phone to your PC.
10(A). On your computer, run "cmd" and type "adb devices" to authorize. *** You will see "unauthorized" from your cmd window ****
10(B). On your computer, you will see your device connected.
11(A). On your keyboard, press Tab * 3 and Enter (OK).
12(A). On your computer, type "adb devices" again to see if USB debugging works properly.
Note that this may or may not work for you depending on your firmware/settings.
Hello everyone,
i looked up similar but havent found a solution to my problem, so i hope you can help me on this one.
My OP 5 fell down, resulting in a broken screen. It is still fully functionally but completely black and i can access the phone via fingerprint as long as its still on. I need to get in MTP Mode to be able to transfer all the Media (e.g. the last year of my kids growing up in pictures)
Dev Mode is activated, so after i plug in my USB Cable to connect it to my PC i think i emember that i can access the selection (Charging/ MTP etc.) over the dropdown menue.
I just have to find the right spot to click.
Can anyone of you maybe screenshot the scenario?
1. After the USB is connected and the debugging window appears
2. The screen when you can select the connection mode?
I tried to use the Program "apowermirror" as well but i cant see where i have to click on the Screen when it says " allow usb debugging" when it tries to connect via USB. So a screenshot of this could work as well.
Additional Info: the bootloader is unlocked and i have TWRP, so maybe there is also a way ?! im a total noob regarding this...
Thank you very much in advance for any help on this.
Snyder
Maybe in twrp you can with adb command, install adb on your computer and search (google) about the command "adb pull" or maybe just reboot twrp (power off and power with vol down) you can access storage. Have you some security? Pin or pattern?
hi, try the program through MyPhoneExplorer, you can via Wi fi