Viper4Android - Moto G5 Plus Questions & Answers

Hi guys...
anybody got V4A FX working fine in potter?
can sb explain the steps ?
mine is always "Processing : NO "
Im running AEX 6.5

hab12345 said:
Hi guys...
anybody got V4A FX working fine in potter?
can sb explain the steps ?
mine is always "Processing : NO "
Im running AEX 6.5
Click to expand...
Click to collapse
Flash Viper4Android FX module by magisk manager. If you're running more than this audio mod like Dolby or Atmos flash Audio Modification Library module too.
Reboot. Viper will only process when music is running. If not close viper by 3 dot menu in the upper right corner and start it again.
If you use Poweramp deactivate Direct Volume under advanced settings in Poweramp.
Sent from my Moto G5 Plus using XDA Labs

Wolfcity said:
Flash Viper4Android FX module by magisk manager. If you're running more than this audio mod like Dolby or Atmos flash Audio Modification Library module too.
Reboot. Viper will only process when music is running. If not close viper by 3 dot menu in the upper right corner and start it again.
If you use Poweramp deactivate Direct Volume under advanced settings in Poweramp.
Sent from my Moto G5 Plus using XDA Labs
Click to expand...
Click to collapse
got it working now
thnx! :good:

Related

Dolby Atmos Mod for Moto X Play

I saw a friend of mine using the Dolby ATMOS Mod for his Redmi 1S in his MIUI 7 ROM. God. The sound is so good. Is the mod working for our stock ROM? Anyone tried the same?
I am also linking to the mod : DOLBY ATMOS
Thank you
I m using Dolby atoms in bliss pop. No issue till now
How to install Dolby atmos my moto x play
Rakesh khoda said:
How to install Dolby atmos my moto x play
Click to expand...
Click to collapse
Here you go mate
Watch this
ekkanpuriya said:
Here you go mate
Watch this
Click to expand...
Click to collapse
the setup worked, but dolby atmos app keeps crashing, and viper doesnt keep the profile loaded ..any help on this?

Sound mod from z5 forum

tested and working on my e6553
http://forum.xda-developers.com/xpe...und-mod-v2-0-z5-stereo-sony-settings-t3405501
How exactly you install ? How did you test the sound actually ? What DSP are working as they say a lot like SRS, Viper, Dolby etc., ? Which kernel you are using ? I am new (was away for long time) so dont know where to test those settings.
Thanks
GryTEcHoG said:
How exactly you install ? How did you test the sound actually ? What DSP are working as they say a lot like SRS, Viper, Dolby etc., ? Which kernel you are using ? I am new (was away for long time) so dont know where to test those settings.
Thanks
Click to expand...
Click to collapse
i flashed it via twrp recovery, am on latest MM 6.0.1, v4a working fine, only problem is that microphone does not work during phone calls, i removed the mod.
zemetal said:
i flashed it via twrp recovery, am on latest MM 6.0.1, v4a working fine, only problem is that microphone does not work during phone calls, i removed the mod.
Click to expand...
Click to collapse
I see. Can you tell me how to enable and test Dolby, SRS effects in these mods ? There is another mod: http://forum.xda-developers.com/cro...d-kitakami-sound-mod-prototype-t3361092/page7 which I'm using now and works good (v4a by installing the lollipop version and system defaults), but no idea about SRS, Dolby effects as i did not get any of those apps after installing the mod. Do you have any idea ?
Thannks
GryTEcHoG said:
I see. Can you tell me how to enable and test Dolby, SRS effects in these mods ? There is another mod: http://forum.xda-developers.com/cro...d-kitakami-sound-mod-prototype-t3361092/page7 which I'm using now and works good (v4a by installing the lollipop version and system defaults), but no idea about SRS, Dolby effects as i did not get any of those apps after installing the mod. Do you have any idea ?
Thannks
Click to expand...
Click to collapse
hhmmm i am using this also, since the one that i linked have a microphone issue on the z3+, i dont really know how to unable those, since that in the zip file, there are no such "apps" apart from v4a for effects and a customized sound enhancement app.
How did you root your Z4 on Android 6.0.1 ??
y9420045825 said:
How did you root your Z4 on Android 6.0.1 ??
Click to expand...
Click to collapse
Read this: http://forum.xda-developers.com/xperia-z4/general/guide-safe-bootloader-unlock-restore-t3386915
http://forum.xda-developers.com/xperia-z4/help/how-to-root-xperia-z3-t3356864

Dolby atmos for custom Rom

Anybody know how I can flash the Dolby atmos app for this phone? The speaker sound is too squeaky on custom roms( right now on resurrection remix)
I already tried using Magisk, but the app(created by yash98) would not open.
still_living said:
Anybody know how I can flash the Dolby atmos app for this phone? The speaker sound is too squeaky on custom roms( right now on resurrection remix)
I already tried using Magisk, but the app(created by yash98) would not open.
Click to expand...
Click to collapse
I've been using the LePro module + V4A FX module for some time. It broke once though (Dolby didn't open for some reason just like you described, SELinux changed to Enforcing so V4A broke) and the only thing that fixed it was a clean install of the ROM.
Choose an username... said:
I've been using the LePro module + V4A FX module for some time. It broke once though (Dolby didn't open for some reason just like you described, SELinux changed to Enforcing so V4A broke) and the only thing that fixed it was a clean install of the ROM.
Click to expand...
Click to collapse
Thanks dude, I think I'll try another Rom with full wipe.
still_living said:
Thanks dude, I think I'll try another Rom with full wipe.
Click to expand...
Click to collapse
Just some advice: I think the best rom is NucleaROM, but it was where I had the problem. Also don't try to install Pure Nexus, don't know if it's fixed but it bricked your phone horribly

how to install dolby atmos

How to enable Dolby Atmos via magisk manager
go to downloads section and find that "Dolby Atmos Lenovo A7000" (Not the same model but it works fine) and download that then it automatically installs
swaranngs said:
How to enable Dolby Atmos via magisk manager
Click to expand...
Click to collapse
Sent from my Lenovo A6000 using XDA Labs
onegabriel said:
go to downloads section and find that "Dolby Atmos Lenovo A7000" (Not the same model but it works fine) and download that then it automatically installs
Click to expand...
Click to collapse
Tried it but not working for me. .it's not installing ..I have enabled Xperia framework,may b that's the reason

Dolby Atmos Le Pro 3

Everytime I try to flash Dolby Atmos on my Le Pro 3 I get the error shown below. If anyone has a fix I'd appreciate it. If it matters I'm running lineage os 15.1
andrew2401 said:
Everytime I try to flash Dolby Atmos on my Le Pro 3 I get the error shown below. If anyone has a fix I'd appreciate it. If it matters I'm running lineage os 15.1
Click to expand...
Click to collapse
Try this one. Flash with twrp.
https://www.mediafire.com/file/i3pcs58sjmx334u/DolbyAtmos_Axon7_Oreo_20180202.zip
Sent from my LEX720 using xda premium
mchlbenner said:
Try this one. Flash with twrp.
https://www.mediafire.com/file/i3pcs58sjmx334u/DolbyAtmos_Axon7_Oreo_20180202.zip
Click to expand...
Click to collapse
Tried it my device boot loops at the lineage os logo. Any idea why it's not working?
andrew2401 said:
Tried it my device boot loops at the lineage os logo. Any idea why it's not working?
Click to expand...
Click to collapse
The different might be I use supsu not magisk.
Sent from my LEX720 using xda premium
andrew2401 said:
Tried it my device boot loops at the lineage os logo. Any idea why it's not working?
Click to expand...
Click to collapse
It works also with magisk.
Use Selinux Mode Changer and make your kernel permissive.
Uninstall or close every sound tuner what comes with the rom. Now flash Dolby Atmos and reboot. Sometimes it needs a second cold boot to come up.
Firmeware version?
It seems that this doesn't work for original Le Eco CDLA headphones. I have tried but can't notice any changes to sound quality.
atlas356 said:
It seems that this doesn't work for original Le Eco CDLA headphones. I have tried but can't notice any changes to sound quality.
Click to expand...
Click to collapse
It absolutely works with CDLA. Keep in mind that some program, such as Poweramp use their own internal EQ, compression and Reverb. Power amp will allow you to choose to use the systems DSP effects ( if you select the option in settings) while some audio players will not.
andrew2401 said:
Everytime I try to flash Dolby Atmos on my Le Pro 3 I get the error shown below. If anyone has a fix I'd appreciate it. If it matters I'm running lineage os 15.1
Click to expand...
Click to collapse
The reason why you see that message has to be with the android version (8.1) that you try to install. That mod would work fine with a previous android version like 7.1 (lineage 14.1 or backwards). See also developer specs for install.
The only way that you can get Dolby or Viper working with recent Oreo builds is to change SELinux to permissive. Then you can install whatever you want, then change SELinux back to Enforcing. I am on the current build of Lineage and ViperFX works just fine.

Categories

Resources