I have tried to install magik and bricked the tablet.
I have downloaded the last zip file from the Asus site for my p027 tablet and I want try to flash the img files to get the tablet working again. Flashing boot.img no problem but there is nothing els I can flash through fastboot. It would be great if you can tell me how and what to do.
Twrp custom recovery installed and it won't restore backup's (stop at 60% and restart automaticly).
unlocked
I finally could restor the system by twrp. I had to format the partition again first before I could restor the system img via the recovery
Error404html said:
I finally could restor the system by twrp. I had to format the partition again first before I could restor the system img via the recovery
Click to expand...
Click to collapse
I have same problem with my p-027. It only boot in fastmode.
I have very less knowledge on flashing firmware.
Please provide steps to recover my bricked tablet.
Related
Hello everyone
could someone help me? I was stuck in recovery twrp, and I would need a zip file for reflesh stock recovery to reinstall the original fw
thanks
i try it with adb sideload but the img file doesn install
recovery.img
Here http://huaweip8.jniklast.bplaced.net/recovery.html you can find the P8 (GRA-L09) Stock Recovery (B132) and P8 (GRA-UL10) Stock Recovery (B720/5.1.1 BETA)
thanks but the stock recovery.img i have it, the problem its how i flash it from twrp? i need zip file for flash it....
thx
Boot in fatsboot and flash it with adb.
All you need
iaio72 said:
Hello everyone
could someone help me? I was stuck in recovery twrp, and I would need a zip file for reflesh stock recovery to reinstall the original fw
thanks
i try it with adb sideload but the img file doesn install
Click to expand...
Click to collapse
Hi! All the files you need is here http://www.mediafire.com/download/qgc3i88dvlmmcl8/ROOT+HUAWEI+P8.rar
It has cwm recovery and stock recovery. Just open the .bat file and plug your phone to your pc.
It will pass cwm recovery, re-root your device, and at the end it will pass automatically the stock recovery for not to lose updates.
*No need to open by yourself command propf etc
I had problem with twrp recovery too, my phone stucked there. So i found this way
Hello,
I have problem with my SM-G530FZ. I have installed TWRP, everything works great. But after that installing whenever I try to reboot, it reboots to TWRP instead of to system, so I have to click Advanced --> Reboot System, if I wish go to system. It's like TWRP is in a first boot partition. How to make it working, before installing, I mean standard reboot / boot is booting into system, not into TWRP?
Thanks for advice.
Reflash your boot partition and recovery as well
But how to do that?
Download the original firmware and unpack it, then go to heimdall or odin and flash the boot partition with the original boot file
Hello, i have a problem with this device zenfone z00ed. When i turn on i saw the procedure of upgrade, but stuck ad 24%. So i try to go to recovery mode but not work, only in fastboot. I try to push recovery image or boot but i get error (seems is not signed). However i have a idea (maybe bad idea) i reset all with fastboot -w.
After it i try to turn on, but i have bootloop with logo asus. So i found the right recovery image, and i go to recovery for push via adb the file http://dlcdnet.asus.com/pub/ASUS/Ze...user.zip?_ga=1.73637138.1491728547.1480409858
But not work , so i copy the file into the microsd and the phone installed the firmware , after it i get the error : can't load invalid boot image
What can i do?
Flash the .43 recovery image then go to stock recovery and try to update from SD card the .44 version from your link.
And make sure your file isn't corrupted.
Thanks for reply. Well i try as you tell me. I used another microSD. So i downloaded the .43 on the web site. Put into the microSD and into the phone. Hard reset and installed the new update file. Reboot. ... Same problem. Hard reset. Same problem. I used another more old update zip from the website. Same problem. Maybe i Need to flash another file? Is strange that problem. The boot-loader isn unlock (however)
How did yout flash the recovery and boot image?
Recovery im sure..like fastboot flash recovery recovery.img...
However.. i follow another istruction to fastboot with twrp (not flash) so i unlocked the boot-loader. After if the phone reboot and automatically works. For now.
Atleast you can use your phone now
Use adb sideload via asus recovery
Can't find anywhere. Downloaded full stock image but there is no recovery.img file. Can anyone share zip or img file of recovery?
There's no stock recovery in Mi A1 because there is no recovery partition in Mi A1.
Flash boot img... It will work as recovery too
Can someone help me with bootloop on mi a1? I try to flash new TWRP 3.2 but flash failed and then I got a bootloop when rebooting device. After that I tryed to flash TWRP 3.1.1.0 with fastboot flash recovery nameorecovery.img but instead of recovery being flashed my device boots up and work just fine. Only problem is if I restart the phone then I get bootloop again. I cant flash stock Nougat ROM through Mi Flash Tool because it is not working to me. Can I flash stock ROM again without using Mi Flash Tool and how? I try to do that manually by fastboot commands but every time getting error PARTITION TABLE DOESNT EXIST. I can boot to new recovery twrp 3.2 but cant flash TWRP installer.zip neither with Partition A or B choosen in REBOOT option. What should I do?
What i did stepwise -
1. Unlocked bootloader of my g5 plus
2. Flashed twrp-3.2.3-1-potter.img via adb
3. Booted to TWRP
4. Wiped to decrypt phone
5*. Booted to system to enable usb debugging, enabled it . Transfered magisk , arrow 9.0 rom , gapps to my internal storage of phone
6. Open bootloader , selected recovery mode and got nothing except error "No Command"
So i cannot flashed anything what i wanted to
What and Where i made the mistake ?
How can i get TWRP back?
Thanks all in advance
Solution
1. Flashed magisk17.1 and lazyflasher
2. Updated magisk manager and got root
3. Installed official TWRP app , granted root and downloaded same TWRP.img from which i decrypted the phone.
4. Flashed twrp fom the official twrp app.
5. No irritating No Command error again
The no command screen is that of the stock recovery (that's a normal screen). From your steps, it seems like you booted to system in step 5 rather than back to recovery. It seems that after flashing TWRP, you may have to boot to recovery to fix TWRP as your recovery (else the stock recovery overwrites TWRP). Afterwards, you should be able to boot as normal with TWRP still present.
Easiest way to recover would be to repeat step 2 and 3. Then reboot to recovery in TWRP and that should retain TWRP. Back up your existing system, then flash the ROM, GApps and magisk as desired.
echo92 said:
The no command screen is that of the stock recovery (that's a normal screen). From your steps, it seems like you booted to system in step 5 rather than back to recovery. It seems that after flashing TWRP, you may have to boot to recovery to fix TWRP as your recovery (else the stock recovery overwrites TWRP). Afterwards, you should be able to boot as normal with TWRP still present.
Easiest way to recover would be to repeat step 2 and 3. Then reboot to recovery in TWRP and that should retain TWRP. Back up your existing system, then flash the ROM, GApps and magisk as desired.
Click to expand...
Click to collapse
Thanks for your answer sir , but it didn't work
What I did again
1.I flashed same twrp from adb
2. Booted to recovery , but this time TWRP didn't asked password and I could see internal storage in twrp but not on my PC
3*.However I took the whole backup of stock nougat and cross check from restore option as there was backup in TWRP folder. I wanted copy that backup to my PC . But PC cannot detect my phone while in recovery
4. So booted to system and my PC detected my phone but there was no backup in TWRP folder.( But around 6gb(backup) of storage was used but I couldn't see it)
5.Again booted to recovery mode but "No Command" showed again .
I tried several times but I keep losing TWRP and couldn't see the backup which I make
Same problem. Resolved by flashing alternately several times twrp-3.2.1-0-potter.img and twrp-3.2.1-1-potter_persist.img and finally updated twrp-3.2.3-1-potter.img
It's because of dm-verity. You have to flash something like magisk or a custom kernel that disables it *before* you reboot into stock.
NZedPred said:
It's because of dm-verity. You have to flash something like magisk or a custom kernel that disables it *before* you reboot into stock.
Click to expand...
Click to collapse
I flashed magisk 17.1 and lazyflasher ,i got magisk and root but cannot install modules may be becoz of f2fs bug . By the way i lost twrp after booting to system again and No command still present in recovery mode . I am frustrated Moto software is just pain in head :silly: