Hello,
I have problem with my SM-G530FZ. I have installed TWRP, everything works great. But after that installing whenever I try to reboot, it reboots to TWRP instead of to system, so I have to click Advanced --> Reboot System, if I wish go to system. It's like TWRP is in a first boot partition. How to make it working, before installing, I mean standard reboot / boot is booting into system, not into TWRP?
Thanks for advice.
Reflash your boot partition and recovery as well
But how to do that?
Download the original firmware and unpack it, then go to heimdall or odin and flash the boot partition with the original boot file
Related
Hello !!
I have successfully flash recovery (HBOOT) with Amon_RA's recovery image.
But when I select the recovery mode, I get :
Code:
Android system recovery <2e>
Use trackball to highlight; click to select
reboot system now
apply sdcard.update.zip
wipe data/factory reset
wipe cache partition
There is nothing about nandroid (and CyanogenMod-5)
Do you have an idea ?
Redownload the recovery image, check the md5sum, if it matches the one provided, then reflash it via fastboot.
Thanks it works well !
I have installed CyanogenMod, but when booting the animation stops and reboots (infinite loop).
DO you have an idea ?
If you didn't wipe first, then you need to wipe, then reflash the rom and the google add on.
You should wipe first, if you are flashing cm for the first time.!
So I had a problem where TWRP counldn't mount system so I tried to format within twrp then I formatted in fastboot. TWRP can now mount it and write to it but when I try to boot to it, it won't load anything but the logo shows (not bootanimation) and shuts down. Then it reboots into recovery.
Edit: Fixed the problem, flashed another rom zip
What i did stepwise -
1. Unlocked bootloader of my g5 plus
2. Flashed twrp-3.2.3-1-potter.img via adb
3. Booted to TWRP
4. Wiped to decrypt phone
5*. Booted to system to enable usb debugging, enabled it . Transfered magisk , arrow 9.0 rom , gapps to my internal storage of phone
6. Open bootloader , selected recovery mode and got nothing except error "No Command"
So i cannot flashed anything what i wanted to
What and Where i made the mistake ?
How can i get TWRP back?
Thanks all in advance
Solution
1. Flashed magisk17.1 and lazyflasher
2. Updated magisk manager and got root
3. Installed official TWRP app , granted root and downloaded same TWRP.img from which i decrypted the phone.
4. Flashed twrp fom the official twrp app.
5. No irritating No Command error again
The no command screen is that of the stock recovery (that's a normal screen). From your steps, it seems like you booted to system in step 5 rather than back to recovery. It seems that after flashing TWRP, you may have to boot to recovery to fix TWRP as your recovery (else the stock recovery overwrites TWRP). Afterwards, you should be able to boot as normal with TWRP still present.
Easiest way to recover would be to repeat step 2 and 3. Then reboot to recovery in TWRP and that should retain TWRP. Back up your existing system, then flash the ROM, GApps and magisk as desired.
echo92 said:
The no command screen is that of the stock recovery (that's a normal screen). From your steps, it seems like you booted to system in step 5 rather than back to recovery. It seems that after flashing TWRP, you may have to boot to recovery to fix TWRP as your recovery (else the stock recovery overwrites TWRP). Afterwards, you should be able to boot as normal with TWRP still present.
Easiest way to recover would be to repeat step 2 and 3. Then reboot to recovery in TWRP and that should retain TWRP. Back up your existing system, then flash the ROM, GApps and magisk as desired.
Click to expand...
Click to collapse
Thanks for your answer sir , but it didn't work
What I did again
1.I flashed same twrp from adb
2. Booted to recovery , but this time TWRP didn't asked password and I could see internal storage in twrp but not on my PC
3*.However I took the whole backup of stock nougat and cross check from restore option as there was backup in TWRP folder. I wanted copy that backup to my PC . But PC cannot detect my phone while in recovery
4. So booted to system and my PC detected my phone but there was no backup in TWRP folder.( But around 6gb(backup) of storage was used but I couldn't see it)
5.Again booted to recovery mode but "No Command" showed again .
I tried several times but I keep losing TWRP and couldn't see the backup which I make
Same problem. Resolved by flashing alternately several times twrp-3.2.1-0-potter.img and twrp-3.2.1-1-potter_persist.img and finally updated twrp-3.2.3-1-potter.img
It's because of dm-verity. You have to flash something like magisk or a custom kernel that disables it *before* you reboot into stock.
NZedPred said:
It's because of dm-verity. You have to flash something like magisk or a custom kernel that disables it *before* you reboot into stock.
Click to expand...
Click to collapse
I flashed magisk 17.1 and lazyflasher ,i got magisk and root but cannot install modules may be becoz of f2fs bug . By the way i lost twrp after booting to system again and No command still present in recovery mode . I am frustrated Moto software is just pain in head :silly:
I have tried to install magik and bricked the tablet.
I have downloaded the last zip file from the Asus site for my p027 tablet and I want try to flash the img files to get the tablet working again. Flashing boot.img no problem but there is nothing els I can flash through fastboot. It would be great if you can tell me how and what to do.
Twrp custom recovery installed and it won't restore backup's (stop at 60% and restart automaticly).
unlocked
I finally could restor the system by twrp. I had to format the partition again first before I could restor the system img via the recovery
Error404html said:
I finally could restor the system by twrp. I had to format the partition again first before I could restor the system img via the recovery
Click to expand...
Click to collapse
I have same problem with my p-027. It only boot in fastmode.
I have very less knowledge on flashing firmware.
Please provide steps to recover my bricked tablet.
Hey,
I have a moto e4 flashed with dotOS and TWRP, it ran out of battery yesterday, and on reboot refused to boot into the OS. My first reflex was to try booting into recovery, i managed to get into fastboot, but when i try to enter recovery it freezes on the TWRP splash screen.
I tried to reflash it, and although fastboot reports a successful reflash, It still freezes at the splash screen. I also tried to use the fastboot boot command to boot the recovery directly from memory, unsuccessfully.
For information, exact model number is XT1762.
If anyone has any ideas or experience with this issue i'd really appreciate some help !
Thanks
jman6495 said:
Hey,
I have a moto e4 flashed with dotOS and TWRP, it ran out of battery yesterday, and on reboot refused to boot into the OS. My first reflex was to try booting into recovery, i managed to get into fastboot, but when i try to enter recovery it freezes on the TWRP splash screen.
I tried to reflash it, and although fastboot reports a successful reflash, It still freezes at the splash screen. I also tried to use the fastboot boot command to boot the recovery directly from memory, unsuccessfully.
For information, exact model number is XT1762.
If anyone has any ideas or experience with this issue i'd really appreciate some help !
Thanks
Click to expand...
Click to collapse
You need to repair your /data
Caution All your Data will be lost. Get a Backup first of all!
1) Go to wipe option in twrp.
2) Select Advanced wipe
3) Tick on to Data and Select Repair or Change file system option.
4) Click on Change file system.
Most of the rom support ext4. but in this time it gave some error.
5) Change the data system to exFAT option and re change option to EXT4.
6) That"s it bro :good::good::good:
JOIN IN OUR TELEGRAM GROUP FOR MORE SUPPORTS AND NEW CUSTOM ROM LINKS.