Database Users

[Guide] Drivers & RRU Errors Solved

This guide is for anyone having issues with their HTC Hero drivers. It is aimed at Windows users and the guide was performed on Windows 7 x64 but relevant to older systems with minor adjustments (use common sense).
Most of it will be pictures, i'll try to fill in the rest in future and give it some layout but for the most part this process is easier to see than describe. Very much a work in progress.
Note: Unplug your phone from your pc for these processes until told otherwise. Remove any version of HTC Sync prior to 2.0.33 before doing these processes.
Might Need Apps:
HTC Sync for Android v1.5
HTC Sync for Android v2.1
USB Deview
Remove Old Drivers:
1. Start USBDeview by running the exe in the zip file
2. Remove any drivers which read like the following:
3. Reboot your machine
Installing The Correct Drivers:
1. Install the latest version of HTC Sync (2.0.40 or 3.0.5422)
2. Reboot
3. Right Click on Computer in your start menu and choose "Manage"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Select Device Manager on the left hand side.
5. Plug your phone into the PC and let the drivers install (you should see changes in device manager in real time). Under "ADB Interface" you should now see "My HTC" as seen in the picture.
This is correct and you should move onto the "Bootloader Drivers" section below. If you don't see this then carry on.
6. Right click on whatever you get under "ADB Interface" and do the following:
- Choose Update Driver Software...
- Browse my computer for driver software
- Let me pick from a list of device drivers on my computer
- Have Disk
- Browse
- C:\Program Files (x86)\HTC\HTC Driver\Driver Files\Win7_x64 (last folder may be different)
- Select "androidusb.inf"
- OK
- Next
- Finish
You should now have the correct HTC Hero drivers installed. Move onto bootloader drivers section.
Bootloader Drivers:
Note: assumes you have the latest version of HTC Sync installed prior to doing this and have followed the driver process above to arrive here.
1. Switch off your phone and then hold Volume Down when you press the Power On button (Vol Down + Power).
2. You should have a white screen with some coloured text and 3 android's on skateboards. This is bootloader mode.
3. Now plug your phone into your pc and watch device manager change (this can take a minute or two). If "ADB Interface" doesn't show up or you get an "Unknown Device" error (perfectly normal - i think) then press the Back button and wait a couple of minutes then press volume Down again. This switches to Fastboot mode and back to Bootloader mode. AFAIK the drivers are the same so you should be able to do this process in either mode. You should get the driver "HTC Bootloader" or similar in your device manager. You need to repeat the steps above to change that to My HTC instead.
4. Right click on whatever you get under "ADB Interface" and do the following:- - Choose Update Driver Software...
- Browse my computer for driver software
- Let me pick from a list of device drivers on my computer
- Have Disk
- Browse
- C:\Program Files (x86)\HTC\HTC Driver\Driver Files\Win7_x64 (last folder may be different)
- Select "androidusb.inf"
- OK
- Next
- Finish
You should now have the correct HTC Hero bootloader drivers installed. This will allow you to correctly install a RRU from HTC.

Brilliant guide! I have added it to my sig!

Nice one, thanks

Wow this worked 100% installed perfectly
thanks

Nexus 4 Stuck In Download Mode

Hie my nexus 4 stuck in download mode
I Hope a vedio tutorial helps lot it saves many bricked phones
when i just connect to a charger or pc just it enters download mode and icon says
donot unplug untill process is completed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i tried following tutorial
Flashing using LGNPST
http://forum.xda-developers.com/nexus-4/general/tutorial-how-to-unbrick-n4-t2347060
there links were dead so ive found another thread from
http://4pda.ru/forum/lofiversion/index.php?t400241-650.html
i have following files:
LGNPST from :
https://onedrive.live.com/?authkey=...989DD7AAE2FA7A70!643&parId=root&action=locate
Flashable bin file using LGNPST From :
https://yadi.sk/d/v_vjNh0JmF3cr
i had no problems with drivers
i installed them using :
driver folder inside LGNPST.zip
i followed following steps in the installation:
1) Install lg usb drivers from lg.com, lg.com -> support -> mobile phones -> optimus g
done
2) Install LGNPST_ACG_v2.2.3_lan_version.msi
done
3) Install LGNPST_GenericModels_Ver_5_0_12_0.msi
done
4) Install LGNPST_Components_Ver_5_0_12_0.msi
done
5) Copy and replace LGNPST_ACG.exe to lgnpst folder under program files
done
6) Copy both dll's to same lgnpst folder in program file
moved models folder(inside LGNPST.ZIP) to LGElectronics directory as folllows
C: \ the LG Electronics has \ LGNPST \ Models \ LGNPST_LS970.dll"
there my dll is located.
7) open cmd as admin
done
8) run regsvr32 c:\path\to\lgnpst\folder\LGLS970_20120926_LGFLASHv141.dll
im confused here
when i add this im having error dll failed to load make sure binary is stored in specific path.......specific module cannot be found
9) Download .tot file for you're phone
done i have it
10) rename .tot to .bin
done
11) Open LGNPST
done
12) Select 970 dll and .bin file
my device is connected and i have some other dll to be selected
and not LGNPST_LS970.dll
i did added bin file fine
13) Start
ERROR
Finished within a second

When not connected to a USB cable, are you able to enter fastboot mode?

Im not able to go fastboot mode
audit13 said:
When not connected to a USB cable, are you able to enter fastboot mode?
Click to expand...
Click to collapse
i just have download mode available :/
and that do comes without any manual actions
just giving power to mobile boots to download mode
both in cases of charging and pc connectivity

Have you tried using the LG mobile upgrade tool: http://www.lg.com/ca_en/support/mobile-support ?
It might help for the Nexus 4 as I had an LG G2 that was stuck in download mode after incorrectly flashing a recovery and ROM.

not helpful
ive installed it says software is upto date

ive installed it says software is upto date
audit13 said:
Have you tried using the LG mobile upgrade tool: http://www.lg.com/ca_en/support/mobile-support ?
It might help for the Nexus 4 as I had an LG G2 that was stuck in download mode after incorrectly flashing a recovery and ROM.
Click to expand...
Click to collapse
it just installed usb drivers

Looks like the bootloader and image is missing from the phone.

nexus download mode
HOLD DOWN THE POWER BUTTON FOR 10 SECONDS THIS SHOULD WORK
Download mode is for installing ROMs/kernels/and programs to the device.
You can safely reset the phone if you are not writing anything to it (which generally requires being connected to your computer via usb). When it says do not unplug or disconnect until process is complete it is referring to the ROM writing process, which it sounds like you haven't initiated.
You likely entered it by holding a certain key combination while powering on the phone.

[Guide][STOCK] How download latest fastboot firmware with Lenovo Moto Smart Assistant

This guide show you how to download latest fastboot images from your device from the official servers, using the Lenovo Moto Smart Assistant software.
If you find mistakes or you do not understand sentences, tell me.
Lenovo Moto Smart Assistant (LMSA) allow you to perform various actions on your phone, such as installing the latest update of the manufacturer, perform backups / restores, manage files stored on the phone... But I recommend to do this actions only if your phone runs the official stock ROM.
Another nice feature of LMSA is that you can download and reinstall the official ROM in case of system corruption. To do this, the software downloads the ROM in fastboot version : then you can take it.
Requirements
- Be able to start your phone in fastboot mode.
- Have the phone's USB port functional + a functional USB cable.
- Have a computer running on Windows 7 - 10 (later version need test, if ok let me know)
- Have internet on your computer
Method
0) Download and install if this is not done yet the USB drivers for Moto G5 fastboot mode (https://support.motorola.com/in/en/drivers)
1) Download and install LMSA from Lenovo's website (https://support.lenovo.com/pl/en/downloads/DS101291)
2) Launch LMSA, click on the "Flash" menu at the top left of the window, and click on "Go Rescue" at the bottom right.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3) Then you will have to select your phone. For the Moto G5, select first at the top "Moto Phone", then below "Moto G5", and then the model of your phone. If you do not know it, watch step 4a. Otherwise, when you plug your phone into fastboot mode, LMSA "should" automatically find the model, but it's safer to choose it manually "just in case".
4) Start/restart your phone in fastboot mode. For the Moto G5, press the start button and at the same time keep pressing the "volume minus" button until you reach the fastboot. If your phone boots to your ROM, repeat this step.
4a) To know the model of your phone, look at the line "Product / Variant" on the fastboot screen, just after "cedric" there should be the model version (XT1670, XT1671, XT1672, XT1675, XT1676 or XT1677).
5) Connect the phone. LMSA should propose you the latest fastboot image available: Just click on the icon next to the image, on the right, to download it.
6) Once the download is complete, a folder containing all the files of the fastboot image is available in the folder :
C:\ProgramData\LMSA\Download\RomFiles (default folder)
Et voilà!
If something wrong
1) Repeat the steps meticulously
2) Be sure to connect the phone only at the end and in fastboot mode
3) Verify that the Motorola USB drivers are correctly installed. To do this, go to the device manager (Press the Windows + R key, write "devmgmt.msc" and press OK). If your screen looks like the first image, the drivers are properly installed.
If your screen looks like the second image, you will need to reinstall the drivers and/or restart your computer.
1) Restart the computer after installing the drivers and LMSA. I already had bug with LMSA that were resolved after a reboot.
1) If it still does not work, please indicate it in the thread. To help you as well as possible, please provide as much information as possible: the version of Windows, the model of your phone, is it root / unblocked, do you use the ROM stock or not, the ROM name...
Note
LMSA automatically decompresses the fastboot image, so if you want to share the image on the internet, it is recommended to re-zip all the files (with 7-Zip for example).
License
Creative Commons Attribution 4.0 International (CC BY 4.0) https://creativecommons.org/licenses/by/4.0/.
You are free and encouraged to use, share, adapt this guide. Just do not forget to indicate that I am the author (thank you! :good.

i cannot download the firmware
it says " Device is not supported" although i have a moto g5 XT 1677

Duplicate message

[email protected] said:
it says " Device is not supported" although i have a moto g5 XT 1677
Click to expand...
Click to collapse
Looks like the application bug, have you tried restarting your computer after installing drivers for fastboot and LMSA? Then, rerun all the procedures and plug your phone into fastboot mode only at the end

it says " Device is not supported" although i have a moto g5 XT 1676 Whit unlock bootloader

LMSA is, IMHO, just a pile of junk. It never detects my phone in the Flash/Upgrade sessions. Apart of that the backup function doesn't work, file manager can only copy files (not folders) and only one at a time afaik.
fastboot and adb alone seemed far more usable to me.

ZTE Blade A0622 Unlock Bootloader

OEM Unlock Bootloader & Install TWRP for ZTE Blade A0622 voyage​
Important! Be sure to perform the first step, in order to avoid problems in the future.
Step 1 - Enable OEM unlock and USB debugging
Go to Settings > About phone.
Click 7 time on Build number.
Going to Advanced settings, tape on Developer options.
Enable OEM Unlocking and USB debugging.
Step 2 - Download files, reboot phone in EDL mode, flash aboot
Download rar archive https://tinyurl.com/y43wbvgo
Unpack archive in any folder
Press on [0] Reboot to EDL.bat , and we go to EDL (9008)
Now we need to find out the COM port, go My Computer -
properties - device manager - Ports (COM & LPT). Remember this number.
Click on [1] Flash Aboot.bat (Right button mouse) - Rename, and change COM port to your number.
After save text file and run him.
Turn on your smartphone, you can go to recovery (Vol.Up+Power).
Now can see chinese engineering menu, press on next file [2] OEM Unlock.bat . After completing the unlock process phone reboot and we need reboot again in recovery mode (Vol.Up+Power).
Now re-entered the Chinese engineering menu, use last bat file
[3] Final Flash.bat . Upon completion, we will see TWRP. After completing step 3, your phone is unlocked!
Step 3 TWRP
Swipe on bottom bar (Do not click on read only). Download chinese rom https://tinyurl.com/yygsrs7e , and intall him. Now you can get root, use magisk v16.0 or magisk v.16.7 (not higher). For the version above, you need a custom kernel, not a stock.

hai, help me
step 2 ; find out the com port
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
rename to top or bottom

https://ibb. co/Vg34XTq

Hi man,step 2 on flash aboot bat is it rename on file or something else? Rename became what if my device is COM23
---------- Post added at 11:40 PM ---------- Previous post was at 11:16 PM ----------
lyoks said:
OEM Unlock Bootloader & Install TWRP for ZTE Blade A0622 voyage​
Important! Be sure to perform the first step, in order to avoid problems in the future.
Step 1 - Enable OEM unlock and USB debugging
Go to Settings > About phone.
Click 7 time on Build number.
Going to Advanced settings, tape on Developer options.
Enable OEM Unlocking and USB debugging.
Step 2 - Download files, reboot phone in EDL mode, flash aboot
Download rar archive https://tinyurl.com/y43wbvgo
Unpack archive in any folder
Press on [0] Reboot to EDL.bat , and we go to EDL (9008)
Now we need to find out the COM port, go My Computer -
properties - device manager - Ports (COM & LPT). Remember this number.
Click on [1] Flash Aboot.bat (Right button mouse) - Rename, and change COM port to your number.
After save text file and run him.
Turn on your smartphone, you can go to recovery (Vol.Up+Power).
Now can see chinese engineering menu, press on next file [2] OEM Unlock.bat . After completing the unlock process phone reboot and we need reboot again in recovery mode (Vol.Up+Power).
Now re-entered the Chinese engineering menu, use last bat file
[3] Final Flash.bat . Upon completion, we will see TWRP. After completing step 3, your phone is unlocked!
Step 3 TWRP
Swipe on bottom bar (Do not click on read only). Download chinese rom https://tinyurl.com/yygsrs7e , and intall him. Now you can get root, use magisk v16.0 or magisk v.16.7 (not higher). For the version above, you need a custom kernel, not a stock.
Click to expand...
Click to collapse
After click flash aboot
Why this happen?

MIUI Official V11.0.3.0 Global Download and Install (fastboot and update)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Method 1: Local Update
Note
You can upgrade your phone by Local Update method without unlocking your phone. The method suits for the situations listed below for sure:
Update to Global Stable ROM from Global Stable ROM, Update to Global Beta ROM from Global Beta ROM, Update to Global Beta ROM from Global Stable ROM and vice versa.
If you encounter the issue that the reboot page keep loading for a long time after flashing, you can choose to wipe all data via entering Recovery Mode.
You can turn off your device and then hold both Volume+ button and Power button at the same time to enter Recovery Mode.
STEP 1
Download the latest MIUI V11.0.3.0.PCAMIXM ROM file Click here to download
There is no need to do it again if you’ve already downloaded the latest ROM file.
STEP 2
Connect your device to the Windows PC/laptop via a micro USB cable, and copy the ROM file downloaded in Step 1 into the folder ‘downloaded_rom’ in the internal storage of your device.
STEP 3
Launch ‘Settings’ app on your device, select ‘About phone’, click ‘System update’, then press ‘three dots’ icon at the top-right corner, and select ‘choose update package’ to enter.
Choose the ROM file you’ve put in ‘downloaded_rom’ in Step 2.
STEP 4
After choosing the right ROM file, your device will begin upgrading.
Your device should automatically boot to the new version when the update is completed.
Method 2: Fastboot Update
This method requires the unlocked bootloader.
In mi6 there is no waiting time to unlock the boot(STEP 1), at least on my device.
Note
A Windows PC/laptop will be needed for the following steps. Make sure that your device is fully charged or has enough power for this process.
This guide will help you update your device to the latest MIUI ROM version.
All user data will be purged in this process. Please back up your data and think twice before proceeding.
STEP 1
Download MIUI ROM Flashing Tool (Size: 46 MB).
Devices marked with locked. If your device is locked, please click here to unlock it first.
If your device is unlocked, please just follow the following tutorial to complete the ROM flashing.
STEP 2
Select the right MIUI ROM version for your phone from the listed below, and download the corresponding package file.
Xiaomi Mi 6 Latest MIUI Official V11.0.3.0 Fastboot File Download
STEP 3
Turn off the device. Press the Volume– key and the Power button at the same time to enter Fastboot mode. Then connect the device to the Windows PC/laptop via a micro USB cable
STEP 4
Double click on the downloaded ROM file to decompress it.
Open the file folder for the decompressed ROM pack, and copy its path on the computer.
STEP 5
Decompress the MIUI ROM flashing tool downloaded in Step 1, and double click on it to install (if there is security warning, select 'Run').
After installation is completed, open MiFlash.exe and paste into the address bar the ROM file folder path copied in the last step.
Click on the first button (circled out in yellow) to Refresh, and MiFlash should automatically recognize the device.
Then click the second button (circled out in red) to flash the ROM file to the device.
STEP 6
Wait until the progress bar inside MiFlash turns fully green, which means the ROM has been successfully installed. Then your device should automatically boot to the new version.
If the flashing guide could not help you, please download Mi PC Suite here
(After Mi PC Suite is installed, make sure that your phone is in fastboot mode, connect your phone to a computer, and select the correct ROM file to flash)
Hope it helps the newbies, thanks.
Credits for Xiaomi Mi Community

This version works on redmi k20 mobile
This version works on redmi k20 mobile