Related
im buying the pro version today, and i want to know the compatibility of roms with this device. (diferent snapdragon cpu version)
did any1 try to flash the new device with the custom roms from the original development section?
I just wish to have miui on it
cnv17 said:
im buying the pro version today, and i want to know the compatibility of roms with this device. (diferent snapdragon cpu version)
did any1 try to flash the new device with the custom roms from the original development section?
I just wish to have miui on it
Click to expand...
Click to collapse
+1 here
u8800pro also have BCM4329 wifi solution instead of qualcomm libra one
I have one. I tryed to flash it with official rom and I bricked it. It was my fault. Now I can't recover it. Any suggestions? In every mode it vibrates and nothing happens. Purple screen doesn't work, recovery mode doesn't work, flashing mode doesn't work.
dexxxterito said:
Purple screen doesn't work.
Click to expand...
Click to collapse
without pink mode u f***ed up
dexxxterito said:
I have one. I tryed to flash it with official rom and I bricked it. It was my fault. Now I can't recover it. Any suggestions? In every mode it vibrates and nothing happens. Purple screen doesn't work, recovery mode doesn't work, flashing mode doesn't work.
Click to expand...
Click to collapse
i had bricked mine also. i live in russia but im not russian hardly i could find a tech service coz i cant speak russian. they are going to run jtag on my phone they were asking for rom or something like that. finally i have found a u8800 pro rom on xda. tomorrow i'll se what will happen. and i can share all my experince with it
edit: the guy who was going to run jtag on my phone in moscow now and he'll be back only on 11th of december.. unfortunatelly i'll wait or i'll try to contact with an official service center in other cities. the problem is i can not find any official service center even in other cities
I can access to the pink screen, but i don't have the image folder... can somebody help me?? i have a big problem if i cant fix it.. it reboots every 80 seconds with the unfinished root image file.. if someone can give me the original one for 2.3.5 pleeeeaaaseee send i to [email protected] i really need it, im having a hard time trying to fix it.. help..!
You need different ROMs compared to u8800, as some people discovered (rather painfully). So far, there are 4 ROM options. Stock ROM options include the stock 2.2, the stock 2.3 (no problems as with the 2.3 for the u8800), however they both suck performance wise.
Then there's a MIUI port which I couldn't even get to install on my device and finally comes cyanogenmod which is the best option so far and the one I'd recommend (you will see a tremendous difference in the performance of the UI).
In this Thread I will port the Iron Rom from the Tab S to our Note 2014
Thanks to Tkkg1994 for making the awsome Iron Rom and xluco for the Kernel
Just to be clear: I didn't developed the Iron Rom (http://forum.xda-developers.com/galaxy-tab-s/development/prerooted-stock-touchwiz-rom-t2973107) nor the xluco Kernel (http://forum.xda-developers.com/showthread.php?t=2725193. I just put them together.
Ok, first how you install the Iron Rom: Download the Iron Rom for the T800 and the xluco Kernel for SM-P600 first and put them on external SD Card. After that go into Recovery and wipe EVERYTHING exept external storage. Maby you can also wipe system only but i highly recommend yout to wipe everything. Install now the Iron Rom and DO NOT CHECK REBOOT AFTER THE IRON ROM INSTALLATION, when it has finished, install the xluco kernel. Than do a Reboot. for me, the Rom took some time to boot, and often did some random reboots. when you see the assistant, you have to be very fast, dont configure anything, as I already said before, it will very likely crash after some time.
So, now why I opned this Thread: I'm not a developer, so I cannot do this by myself. Hope I will get some help, I know everybody is waiting for a Lollipop Custom Rom
good point mate ... Maybe I'm going to give other CRs of that a Try ... have you tried that with other Custom ROMs like AOSP ones or others ?
Yes, I did. In the past I could get a KitKat Rom from our big brother P900 running on my device using the same method as I used here.
wulkanat said:
In this Thread I will port the Iron Rom from the Tab S to our Note 2014
Thanks to Tkkg1994 for making the awsome Iron Rom and xluco for the Kernel
Just to be clear: I didn't developed the Iron Rom (http://forum.xda-developers.com/galaxy-tab-s/development/prerooted-stock-touchwiz-rom-t2973107) nor the xluco Kernel (http://forum.xda-developers.com/showthread.php?t=2725193. I just put them together.
Ok, first how you install the Iron Rom: Download the Iron Rom for the T800 and the xluco Kernel for SM-P600 first and put them on external SD Card. After that go into Recovery and wipe EVERYTHING exept external storage. Maby you can also wipe system only but i highly recommend yout to wipe everything. Install now the Iron Rom and DO NOT CHECK REBOOT AFTER THE IRON ROM INSTALLATION, when it has finished, install the xluco kernel. Than do a Reboot. for me, the Rom took some time to boot, and often did some random reboots. when you see the assistant, you have to be very fast, dont configure anything, as I already said before, it will very likely crash after some time.
So, now why I opned this Thread: I'm not a developer, so I cannot do this by myself. Hope I will get some help, I know everybody is waiting for a Lollipop Custom Rom
Click to expand...
Click to collapse
@wulkanat @hitman1376 were either of you able to get this ROM running on your device? If so, which build did you use? I've tried at least a dozen different configurations via Aroma Installer on both the 2.4.5 and 2.5 builds, but the SystemUI crashes on me within seconds of booting up every time.
raneym305 said:
@wulkanat @hitman1376 were either of you able to get this ROM running on your device? If so, which build did you use? I've tried at least a dozen different configurations via Aroma Installer on both the 2.4.5 and 2.5 builds, but the SystemUI crashes on me within seconds of booting up every time.
Click to expand...
Click to collapse
To be honest , I didn't try it out ... but , as the devices have so many things in common , it wasn't so odd ... but , does it happen the same on the MM ROM ?
With Best Wishes
Hitman1376
hitman1376 said:
To be honest , I didn't try it out ... but , as the devices have so many things in common , it wasn't so odd ... but , does it happen the same on the MM ROM ?
With Best Wishes
Hitman1376
Click to expand...
Click to collapse
You would think so. A couple years ago, it seemed like most apps/features were interchangeable between the Note 2014, Note Pro, Tab Pro, and Tab S on Kitkat. I distinctly remember my go-to ROM was originally designed for the Note Pro.
As far as IronROM V3.0 (MM) goes, the Aroma installer detected my device right away and put the kibosh on that experiment... not that it would have worked anyway seeing as how we don't have a 6.0.1 kernel... I was just hoping to get enough of the ROM installed so I could use TWRP's file manage to extract the files I want while still in recovery.
Anyway, now that my Note7 will be stuck with a non-rootable, unsupported, firmware for eternity; I figured it'd be fun to grab my old SM-P600 and see what havoc I can wreak on it.
raneym305 said:
You would think so. A couple years ago, it seemed like most apps/features were interchangeable between the Note 2014, Note Pro, Tab Pro, and Tab S on Kitkat. I distinctly remember my go-to ROM was originally designed for the Note Pro.
As far as IronROM V3.0 (MM) goes, the Aroma installer detected my device right away and put the kibosh on that experiment... not that it would have worked anyway seeing as how we don't have a 6.0.1 kernel... I was just hoping to get enough of the ROM installed so I could use TWRP's file manage to extract the files I want while still in recovery.
Anyway, now that my Note7 will be stuck with a non-rootable, unsupported, firmware for eternity; I figured it'd be fun to grab my old SM-P600 and see what havoc I can wreak on it.
Click to expand...
Click to collapse
Well , if you just want to play around , you can try out the stock Lollipop with my Prime Kernel and get better Performance and Battery or even CM13 / CM14 ... about the aroma , you can disable the device verification ... also I guess you can force the TW MM boot with Lollipop Kernel like it boots CM13 and CM14 ( I don't mean booting without any problems and also don't forget T-805's MM Kernels !! ) the Biggest problem is that we don't have a MM Bootloader which is the biggest problem ... anyway , this device is still so powerful to play newest games and OSs ... It's not fair to abandon it :laugh: ... You know ? I had a very busy day and I have been awake since around 6 AM when I woke for salat till now which is 12:41 AM :crying: !! so , My brain doesn't have any more juice and I need to get some sleep ... I hope you like my kernel ( esp. In case you'd like to test it out :laugh: ) ... I Updated it just some minutes ago
With Best Wishes
Hitman1376
Hello Everyone
Since the G901F Model has only few Roms , thanks to @fawadshah33 we finally are able to port roms from Note 4 device ( 910F ) anyway i was trying to port this Rom : http://forum.xda-developers.com/note-4/snapdragon-dev/norma-n7-port-910g-f-t3458481 i replaced the boot.img with the stock MM of the G901F device , then flashed the rom and after used the MM auto-porter that @fawadshah33 provided and restarted the device
For a second i felt happy when i saw the boot animation then after like 5 seconds the animation stopped , the device vibrated then the screen become black and it was stuck there
I really need the help of expert devs to at least tell me this problem is from what exactly , usually if there is a problem the rom don't boot at all but this one boots for around 5 seconds then the screen turn to black and the device vibrate
i really appreciate your help guys and thank you in advance
Hedi.Karray said:
Hello Everyone
Since the G901F Model has only few Roms , thanks to @fawadshah33 we finally are able to port roms from Note 4 device ( 910F ) anyway i was trying to port this Rom : http://forum.xda-developers.com/note-4/snapdragon-dev/norma-n7-port-910g-f-t3458481 i replaced the boot.img with the stock MM of the G901F device , then flashed the rom and after used the MM auto-porter that @fawadshah33 provided and restarted the device
For a second i felt happy when i saw the boot animation then after like 5 seconds the animation stopped , the device vibrated then the screen become black and it was stuck there
I really need the help of expert devs to at least tell me this problem is from what exactly , usually if there is a problem the rom don't boot at all but this one boots for around 5 seconds then the screen turn to black and the device vibrate
i really appreciate your help guys and thank you in advance
Click to expand...
Click to collapse
So does your device still boot to download mode or odin mode?
Jaistah said:
So does your device still boot to download mode or odin mode?
Click to expand...
Click to collapse
YES the device boot normally to everything , Download Mode and even Recovery
you can't port "n7 for n4" rom for s5 using auto port, if you can then so many n7 port rom are available now, you just can auto port any "s7,n5 for n4" for s5 for now
tavatien86 said:
you can't port "n7 for n4" rom for s5 using auto port, if you can then so many n7 port rom are available now, you just can auto port any "s7,n5 for n4" for s5 for now
Click to expand...
Click to collapse
understood , so its impossible for now i should stop trying ?
and i can for sure port "s7,n5 for n4" for s5 ??
Hedi.Karray said:
understood , so its impossible for now i should stop trying ?
and i can for sure port "s7,n5 for n4" for s5 ??
Click to expand...
Click to collapse
not sure 100% for all but some rom like "dr.ketan", "noble", "s7e for n9100(china forum)" that you can using auto port now, those 3 rom i think would be the best port for now, other than that if you want note7 port rom you need a custom kernel to boot up
tavatien86 said:
not sure 100% for all but some rom like "dr.ketan", "noble", "s7e for n9100(china forum)" that you can using auto port now, those 3 rom i think would be the best port for now, other than that if you want note7 port rom you need a custom kernel to boot up
Click to expand...
Click to collapse
actually i'm now downloading the ''DR.Ketan'' rom hoping that porting will work , so thank you for confirming it , and i will look for that S7e one , and since you clearly knows a lot that i dont , can you try to explain briefly why we need another kernel for the Note 7 roms ?
Hedi.Karray said:
actually i'm now downloading the ''DR.Ketan'' rom hoping that porting will work , so thank you for confirming it , and i will look for that S7e one , and since you clearly knows a lot that i dont , can you try to explain briefly why we need another kernel for the Note 7 roms ?
Click to expand...
Click to collapse
i just like you i'm just a user not a developer so not sure about anything, since there are no developer for g901 and g906 now we can't kown exactly what wrong with port rom, i try 2 rom from 1 developer in china forum, he use 1 kernel(i see in image that is stock kernel) for both of them, the "s7e for n4" rom can auto port for our s5 but the n7 rom can't, so i'm not sure that about kernel, all i know that all the n7 rom port for "normal s5(g900)" using custom kernel
tavatien86 said:
i just like you i'm just a user not a developer so not sure about anything, since there are no developer for g901 and g906 now we can't kown exactly what wrong with port rom, i try 2 rom from 1 developer in china forum, he use 1 kernel(i see in image that is stock kernel) for both of them, the "s7e for n4" rom can auto port for our s5 but the n7 rom can't, so i'm not sure that about kernel, all i know that all the n7 rom port for "normal s5(g900)" using custom kernel
Click to expand...
Click to collapse
understood , so can you give me the links to those 2 roms that works on the G091F ? cuz i searched all the net looking for roms for that device but i didnt succeed
Hedi.Karray said:
understood , so can you give me the links to those 2 roms that works on the G091F ? cuz i searched all the net looking for roms for that device but i didnt succeed
Click to expand...
Click to collapse
i think that you should use dr.ketan for now because that rom fully english, the rom in china forum has some modify that you can't change it to english easy, but if you want to test then here you are, try some rom if you want and remember n7 port never work for now, other that aurora like v9 not work too, you can test some rom and post here what rom work so everybody can use
http://bbs.gfan.com/forum.php?mod=forumdisplay&fid=1545&page=1&filter=typeid&typeid=11661
you can try "s7e v2" by S5feng that rom can boot up, remember to using auto port too
oh and onething the developer make that auto port from the first 6.0 base so if you in higher base you need to use odin to get back the first 6.0 base of your divice
tavatien86 said:
i think that you should use dr.ketan for now because that rom fully english, the rom in china forum has some modify that you can't change it to english easy, but if you want to test then here you are, try some rom if you want and remember n7 port never work for now, other that aurora like v9 not work too, you can test some rom and post here what rom work so everybody can use
http://bbs.gfan.com/forum.php?mod=forumdisplay&fid=1545&page=1&filter=typeid&typeid=11661
you can try "s7e v2" by S5feng that rom can boot up, remember to using auto port too
oh and onething the developer make that auto port from the first 6.0 base so if you in higher base you need to use odin to get back the first 6.0 base of your divice
Click to expand...
Click to collapse
i didnt understand your last line , i'am now on Stock last rom realesed ''G901FXXU1CPF6_G901FPHN1CPF2_G901FXXU1CPH3_HOME.tar'' do i need to flash other modem and bootloader than that ?
Hedi.Karray said:
i didnt understand your last line , i'am now on Stock last rom realesed ''G901FXXU1CPF6_G901FPHN1CPF2_G901FXXU1CPH3_HOME.tar'' do i need to flash other modem and bootloader than that ?
Click to expand...
Click to collapse
it mean if you in higher base you can't use that auto port perfectly, if you read all 5 page of auto port thread you can see the guy make auto port for higher base rom said it may have some bug so if you want using auto port without any issue you need to get back the lowest 6.0 base
tavatien86 said:
it mean if you in higher base you can't use that auto port perfectly, if you read all 5 page of auto port thread you can see the guy make auto port for higher base rom said it may have some bug so if you want using auto port without any issue you need to get back the lowest 6.0 base
Click to expand...
Click to collapse
if iam on higher base the rom wont boot at all ? or it will boot with problems ?
Hedi.Karray said:
if iam on higher base the rom wont boot at all ? or it will boot with problems ?
Click to expand...
Click to collapse
i don't know, as he said the rom still can boot but he have issue with calling that he can't hear any voice, i never try in higher base before, and if you in higher base and still want to port you need to make a new auto port because the auto port in #1 using every file from lowest 6.0 base
tavatien86 said:
i don't know, as he said the rom still can boot but he have issue with calling that he can't hear any voice, i never try in higher base before, and if you in higher base and still want to port you need to make a new auto port because the auto port in #1 using every file from lowest 6.0 base
Click to expand...
Click to collapse
i just flashed DR.Ketan rom and after it flashed the MM-N4-AutoPorter-for-G906x_G901F.zip and rebooted but the device didnt want to boot , i start to see the boot animation then it restart .. so i flashed another file : Port_G901F_from_G906_K-L-S__FawadShah.zip , and with that file the device didnt reboot it continued booting to rom i waited around 10 minutes then the phone start to vibrate softly after every single 30 seconds
Conlusion : the rom didnt boot i dont know why
Hedi.Karray said:
i just flashed DR.Ketan rom and after it flashed the MM-N4-AutoPorter-for-G906x_G901F.zip and rebooted but the device didnt want to boot , i start to see the boot animation then it restart .. so i flashed another file : Port_G901F_from_G906_K-L-S__FawadShah.zip , and with that file the device didnt reboot it continued booting to rom i waited around 10 minutes then the phone start to vibrate softly after every single 30 seconds
Conlusion : the rom didnt boot i dont know why
Click to expand...
Click to collapse
well as i said if you on lastest base you must build 2 new patch if you want to port, if you use 2 patch in #1 you must on the lowest base 6.0, flash rom->port_901f...->auto porter, reboot recovery after every zip, that should work
hey ive been using the stock rom for almost 2 years .. recently im getting the ghost touch issues ,,, the phone keeps opening something while in my pocket and even wen im using it , random touches are registered .. so maybe flashing a custom rom shud fix it i guess ., any rom suggestions ? and many ppl here are running marshmallow on zenfone 2 , but i checked for updates and there are no updates available at all.. if so , can someone tell me how do i install that mm ota on my phone and which wud be better to flash ? the official mm ota or custom rom such as rrmix etc etc.. thanks guys ! i cant try and test every rom i like cos im on limited monthly data so hope u understand .. thanks ..
I have a redmi 2 prime, couple of weeks back i have installed a custom rom on my device and somehow made a mistake, Now when i wanted to go back to stock rom, my device is not installing stock rom on my device but i can install custom rom. I don't know what is problem and how to solve it. I think i have deleted my device bootloader And if it is really the problem of deleted bootloader then how to get it back to get stock rom back on my device. And if not then tell me a stable and good custom rom will try that rom out.
Please if anybody have a solution help me.....
Help needed badly
Are u getting any error like while flashing stock ROM.As per I know if bootloader got deleted/corrupted then u will not able to install stock rom as well as any custom ROM.But u can install custom ROM then nothing to worry.Just try different version of stock ROM with latest mi flash toll by proper guide or guide
skyrockr said:
I have a redmi 2 prime, couple of weeks back i have installed a custom rom on my device and somehow made a mistake, Now when i wanted to go back to stock rom, my device is not installing stock rom on my device but i can install custom rom. I don't know what is problem and how to solve it. I think i have deleted my device bootloader And if it is really the problem of deleted bootloader then how to get it back to get stock rom back on my device. And if not then tell me a stable and good custom rom will try that rom out.
Please if anybody have a solution help me.....
Help needed badly
Click to expand...
Click to collapse
1. Download xiaomi.EU rom (HM2WXCPRO)
2. Go to twrp
3. Wipe cache/dalvik , data (DO NOT WIPE SYSTEM)
4. Flash the xiaomi.EU ROM,if it shows error 7 try flashing again , and also don't flash gapps as they are included.
5.Reboot to system
It will take 10 mins to boot and flash the ROM if u know your mi account password else you will stuck in the setup
flash the fastboot rom via pc using Xiaomi flash tool
All your problems will be solved
thanks for replying.
Will try to do , hopefully from any method if I'm able to go back to stock rom. Thanks guys for replying. Appreciated. ????
skyrockr said:
Will try to do , hopefully from any method if I'm able to go back to stock rom. Thanks guys for replying. Appreciated.
Click to expand...
Click to collapse
Good Luck :good: