I recently activated my SM-N910A on my new T-Mobile account. The phone was out of contract, so I asked AT&T to unlock it, and they did. The phone is working properly with my T-Mobile SIM card, albeit on the AT&T firmware.
Is it possible to replace the AT&T firmware with a stock Samsung Firmware, or, at the very least, with the T-Mobile branded firmware (for SM-N910T)? I understand that the bootloader is locked on these AT&T devices. Is it possible to unlock the bootloader and load a different firmware onto the device?
AT&T firmware has SO much bloatware, and I've not had any luck finding a way to root the phone on this firmware, so I'm stuck with all that bloat. What are my options here? Thanks!
EDIT: The phone was updated OTA to Marshmallow (6.0.1) when it was on the AT&T network. Build number is MMB29M.N910AUCS2EPH7
I am unsure whether I need to change my firmware or not. I have the galaxy s8 at&t carrier unlocked variant. about 3 months ago I flashed the unlocked firmware on the phone so I could get updates. I'm using Walmart family mobile which is (MVNO) of Tmobile. I want to continue getting updates without bricking my phone. What should I do?
https://www.xda-developers.com/samsung-galaxy-s8-note8-bootloader-odin/
update to CRB1 from https://samsung.firmware.science/
My baseband version is G950U1UES2AQL1
My model number is SM-G950U1
I don't see either as an option on the link. any help?
Sorry for a noob question. I haven't been here since my days with an S3.
I pick up an supposedly unlocked G950U on ebay a week or so ago. When I got it It had G950USQU3CRE9 from 6/18 firmware installed. I put in my Mint Mobile SIM and it worked and had no carrier bloatware, but would fail when doing a manual update. Strangely in settings the Service provider SW ver. section was absent. I downloaded at installed via Odin G950USQU5CRL2. Magically the Service provider SW ver is now in settings.
Trying a manual update it downloaded and installed G950USQU5CSA4. SWEET. But I'm confused why I recieved that update.
Under Service provider SW ver it now lists;
SAOMC_SM-950U_OYN_XAS_OO_0075
xxxxxxxxxxxxxxxxxxx
XAS/XAA/VZW
Who am I getting the update for? Sammobile doesn't list SA4 for CSC's XAS (unknown) or XAA (unlocked) but does for VZW
The Phone ID app lists my product code as SM-G950UZVAXAA
Am i getting the update for verizon but a XAA unbloated one? or what? I would think XAS would be my active CSC.
Confused .... My last time playing with phones CSC didn't exist and I can't figure it out.
Also, I would love to flash the G950U1 firmware but there isn't a version a current as SA4, even the pie betas, and concerned about a brick.
Any help in understanding would be GREATLY appreciated.
6shuter said:
Sorry for a noob question. I haven't been here since my days with an S3.
I pick up an supposedly unlocked G950U on ebay a week or so ago. When I got it It had G950USQU3CRE9 from 6/18 firmware installed. I put in my Mint Mobile SIM and it worked and had no carrier bloatware, but would fail when doing a manual update. Strangely in settings the Service provider SW ver. section was absent. I downloaded at installed via Odin G950USQU5CRL2. Magically the Service provider SW ver is now in settings.
Trying a manual update it downloaded and installed G950USQU5CSA4. SWEET. But I'm confused why I recieved that update.
Under Service provider SW ver it now lists;
SAOMC_SM-950U_OYN_XAS_OO_0075
xxxxxxxxxxxxxxxxxxx
XAS/XAA/VZW
Who am I getting the update for? Sammobile doesn't list SA4 for CSC's XAS (unknown) or XAA (unlocked) but does for VZW
The Phone ID app lists my product code as SM-G950UZVAXAA
Am i getting the update for verizon but a XAA unbloated one? or what? I would think XAS would be my active CSC.
Confused .... My last time playing with phones CSC didn't exist and I can't figure it out.
Also, I would love to flash the G950U1 firmware but there isn't a version a current as SA4, even the pie betas, and concerned about a brick.
Any help in understanding would be GREATLY appreciated.
Click to expand...
Click to collapse
Xaa is unlocked firmware. I think xas is sprint. But the third vzw means your sales code is verizon so you should be getting updates from them. You can use sammobile or updato get the latest and flash home csc with your sim in and it should go to your carrier. 5th digit from end is bootloader revision thats what you have to pay attn to. As long as you get revision 5 firmware ypur gold. We have locked bootloaders so you cant really brick with odin. You have to flash a rev 5 combination file then the u1 firmware which is the unlocked firms
So what i think is you got a sprint phone with unlocked firmware but with verizon as a sales code for end user if im not mistaken... If thats the case it is most def unlocked sim wise.
I have a couple of noob questions as well Since I'm new to CSC era...
Got s8 950U and was not able to update FW for several months now due to no functioning OTA and Odin failed as I lack the combination file knowledge. My phone appears to be for Hong Kong market with Snapdragon and I use it in Europe.
1) Is it possible to unlock OTA by switching CSC to local provider? Not sure if 950U is even supported in Europe CSCs? What if I pick XAA instead of local one?
2) Any idea how to update to Pie and unlock OTA/Samsung Pay/Secure folder etc.? What is the correct formula to understand which combination file to use before flashing latest Pie 950U1 XAA ROM G950U1UEU5DSC1?
Nobody able to help at least slightly?
i have the same problem with my s8 , thar has csc of hong kong tgy and won't me let download the last updates also i can't open samsung health secure folder s pay ect....any solution ??! ,, thanks in advance
I have the same issue. Phone name is SM-G950U but CSC is TGY (Hongkong). It can not be updated via OTA and I don't know what is its correct CSC.
Rooted Extreme Syndicate s8 g590U (update to BST CSC)
TheMadScientist said:
Xaa is unlocked firmware. I think xas is sprint. But the third vzw means your sales code is verizon so you should be getting updates from them. You can use sammobile or updato get the latest and flash home csc with your sim in and it should go to your carrier. 5th digit from end is bootloader revision thats what you have to pay attn to. As long as you get revision 5 firmware ypur gold. We have locked bootloaders so you cant really brick with odin. You have to flash a rev 5 combination file then the u1 firmware which is the unlocked firms
So what i think is you got a sprint phone with unlocked firmware but with verizon as a sales code for end user if im not mistaken... If thats the case it is most def unlocked sim wise.
Click to expand...
Click to collapse
Will this work for my Rooted Extreme Syndicate s8 g590U nougat? mine says BST/BST/VWZ. (not able to receive SMS texts) Possible to flash DTA6 home CSC without breaking root to update my carrier?
Hey Everybody,
So I've come to realize that my unlocked US S10+ on AT&T didn't have VOLTE or Wifi calling as options in the communication/call settings menus. this is pretty disappointing as it seems that using the unlocked phone with Verizon you get these features, and they make a decent impact on my use of the phone.
My understanding is if I flash the ATT firmware to the phone I would get the functions, so being an amateur I followed some simple guides to SamFirm AND ODIN, and downloaded the ATT CSC firmware for my model number. However after going through the Odin process and resetting my phone it is still showing the same Software information as prior to my installation, and I do not have the features.
I saw a thread on the board stating that the ATT firmware isn't available yet, so I'm not sure if what I downloaded was actually any different than what is on my phone,and my phones "Service Provider Software Version" did already have ATT in the description, which is a bit confusing to me.
Am I correct in understanding the only way to get the features would be through a firmware flash? And would anyone know if I had flashed the right firmware, and what the original firmware CSC would be for my model if I needed to revert?
My information is:
Model Number:
SM-G975U1 (S10+ ceramic white 512GB - Unlocked US)
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
Firmware file obtained from SamFirm:
SM-G975U1_1_20190225093814_9wyh9qbuyg_fac
AP file name for reference:
AP_G975U1UEU1ASBA_CL15445662_QB22243196_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar
If it's anything like the S9 was, you can't just ODIN the firmware/CSC. You'll just get the bloat with none of the features you want.
Goronok said:
If it's anything like the S9 was, you can't just ODIN the firmware/CSC. You'll just get the bloat with none of the features you want.
Click to expand...
Click to collapse
I've heard this as well. If you want those features on a Samsung phone, it has to be at&t branded. I ordered an at&t phone from Samsung since I make good use of wifi calling. It works fine on my unlocked P3XL but no dice on the Samsungs.
I have the same phone and service and when I went to update my imei they told me it could not find the phone. So I was without lte/4g for a day until I gave them a imei to a s8 active. Now I have data at least
Darthshadow666 said:
Hey Everybody,
So I've come to realize that my unlocked US S10+ on AT&T didn't have VOLTE or Wifi calling as options in the communication/call settings menus. this is pretty disappointing as it seems that using the unlocked phone with Verizon you get these features, and they make a decent impact on my use of the phone.
My understanding is if I flash the ATT firmware to the phone I would get the functions, so being an amateur I followed some simple guides to SamFirm AND ODIN, and downloaded the ATT CSC firmware for my model number. However after going through the Odin process and resetting my phone it is still showing the same Software information as prior to my installation, and I do not have the features.
I saw a thread on the board stating that the ATT firmware isn't available yet, so I'm not sure if what I downloaded was actually any different than what is on my phone,and my phones "Service Provider Software Version" did already have ATT in the description, which is a bit confusing to me.
Am I correct in understanding the only way to get the features would be through a firmware flash? And would anyone know if I had flashed the right firmware, and what the original firmware CSC would be for my model if I needed to revert?
My information is:
Model Number:
SM-G975U1 (S10+ ceramic white 512GB - Unlocked US)
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
Firmware file obtained from SamFirm:
SM-G975U1_1_20190225093814_9wyh9qbuyg_fac
AP file name for reference:
AP_G975U1UEU1ASBA_CL15445662_QB22243196_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar
Click to expand...
Click to collapse
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
So I have the same service provider software, on my unlocked s10+, however when I went into an ATT store and looked at a branded S10+
I noticed the service provider software version to be : SOAMC_SM-G975U1_OYM_ATT_PP_0033( thirty three at end),
so anyway to update the service provider version? does that come from the SIM ??
I have an unlocked S10 plus and I flashed the AT&T Firmware. I now have VoLTE and WiFi calling unlocked on my phone using AT&T. You need to make sure you flash the U version of the firmware, not the U1 one. Unlocked S10 is using the U1 firmware already so flashing that one again changes nothing.
beethoven1854 said:
I have an unlocked S10 plus and I flashed the AT&T Firmware. I now have VoLTE and WiFi calling unlocked on my phone using AT&T. You need to make sure you flash the U version of the firmware, not the U1 one. Unlocked S10 is using the U1 firmware already so flashing that one again changes nothing.
Click to expand...
Click to collapse
Where did you get the att firmware?
Sent from my SM-G975U using Tapatalk
I kinda doubt it but did any of you with unlocked phones that flashed the AT&T firmware get any better service? I've been considering it to get VOLTE but just wondered
jamgam said:
I kinda doubt it but did any of you with unlocked phones that flashed the AT&T firmware get any better service? I've been considering it to get VOLTE but just wondered
Click to expand...
Click to collapse
I followed this thread https://forum.xda-developers.com/galaxy-s10/how-to/att-ota-ota-updates-t3909697
At first like you I downloaded the wrong version and nothing changed. I finally flashed G975USQU1ASBA and now have VOLTE/WIFI Calling and of course all of the bloat. But at least those two functions are working. Make sure that you complete a clean flash when I did a dirty flash I had problems sticking on the loading screen.
I believe you just need to call in ATT to take care those carrier specific features .
Which firmware can I flash with Odin to my S10+ Xfinity Mobile unlocked to get AT&T OTA updates? Currently have ASF7 flashed from the latest unknown firmware uploaded to Sammobile. I flashed w/o USERDATA. I just want to be able to get future OTA updates as I just switched my carrier from Metro by T-Mobile to AT&T. I was using U1 US unlocked firmwares on my Note9 & S10+ but want to use carrier perks now with AT&T.
What's with AT&T being the only ones to not release update files? You would think they all would be required to release them. More AT&T customers need kick up a fuss about it.
Hello all,
Newbie here.
I have a galaxy 8+ that I got a few years ago that had US Cellular.
I flashed it to an unlocked bloatfree U1 firmware.
I've been using MVNOs all that time, but now I have ATT service (they have great deals in the US right now) and I want to use att with all the bloat (wifi calling, hd voice, etc).
I'm on G955U1 and need to find stock ATT SM-G955U firmware that will support bootloader 7 (baseband is G955U1UES7DTC1).
Tried Sammobile but it appears as if the firmware they have is for Android 7 supporting bootloader 1.
Not quite sure how to use updato. From what I can see, there are no bootloader 7 firmware packages and the one att package is U1.
Any help will be much appreciated.
Thanks
Wondering if it would be make sense flash to US Cellular using the sammoble firmware.
Problem is it doesn't get me to ATT.