Sorry for a noob question. I haven't been here since my days with an S3.
I pick up an supposedly unlocked G950U on ebay a week or so ago. When I got it It had G950USQU3CRE9 from 6/18 firmware installed. I put in my Mint Mobile SIM and it worked and had no carrier bloatware, but would fail when doing a manual update. Strangely in settings the Service provider SW ver. section was absent. I downloaded at installed via Odin G950USQU5CRL2. Magically the Service provider SW ver is now in settings.
Trying a manual update it downloaded and installed G950USQU5CSA4. SWEET. But I'm confused why I recieved that update.
Under Service provider SW ver it now lists;
SAOMC_SM-950U_OYN_XAS_OO_0075
xxxxxxxxxxxxxxxxxxx
XAS/XAA/VZW
Who am I getting the update for? Sammobile doesn't list SA4 for CSC's XAS (unknown) or XAA (unlocked) but does for VZW
The Phone ID app lists my product code as SM-G950UZVAXAA
Am i getting the update for verizon but a XAA unbloated one? or what? I would think XAS would be my active CSC.
Confused .... My last time playing with phones CSC didn't exist and I can't figure it out.
Also, I would love to flash the G950U1 firmware but there isn't a version a current as SA4, even the pie betas, and concerned about a brick.
Any help in understanding would be GREATLY appreciated.
6shuter said:
Sorry for a noob question. I haven't been here since my days with an S3.
I pick up an supposedly unlocked G950U on ebay a week or so ago. When I got it It had G950USQU3CRE9 from 6/18 firmware installed. I put in my Mint Mobile SIM and it worked and had no carrier bloatware, but would fail when doing a manual update. Strangely in settings the Service provider SW ver. section was absent. I downloaded at installed via Odin G950USQU5CRL2. Magically the Service provider SW ver is now in settings.
Trying a manual update it downloaded and installed G950USQU5CSA4. SWEET. But I'm confused why I recieved that update.
Under Service provider SW ver it now lists;
SAOMC_SM-950U_OYN_XAS_OO_0075
xxxxxxxxxxxxxxxxxxx
XAS/XAA/VZW
Who am I getting the update for? Sammobile doesn't list SA4 for CSC's XAS (unknown) or XAA (unlocked) but does for VZW
The Phone ID app lists my product code as SM-G950UZVAXAA
Am i getting the update for verizon but a XAA unbloated one? or what? I would think XAS would be my active CSC.
Confused .... My last time playing with phones CSC didn't exist and I can't figure it out.
Also, I would love to flash the G950U1 firmware but there isn't a version a current as SA4, even the pie betas, and concerned about a brick.
Any help in understanding would be GREATLY appreciated.
Click to expand...
Click to collapse
Xaa is unlocked firmware. I think xas is sprint. But the third vzw means your sales code is verizon so you should be getting updates from them. You can use sammobile or updato get the latest and flash home csc with your sim in and it should go to your carrier. 5th digit from end is bootloader revision thats what you have to pay attn to. As long as you get revision 5 firmware ypur gold. We have locked bootloaders so you cant really brick with odin. You have to flash a rev 5 combination file then the u1 firmware which is the unlocked firms
So what i think is you got a sprint phone with unlocked firmware but with verizon as a sales code for end user if im not mistaken... If thats the case it is most def unlocked sim wise.
I have a couple of noob questions as well Since I'm new to CSC era...
Got s8 950U and was not able to update FW for several months now due to no functioning OTA and Odin failed as I lack the combination file knowledge. My phone appears to be for Hong Kong market with Snapdragon and I use it in Europe.
1) Is it possible to unlock OTA by switching CSC to local provider? Not sure if 950U is even supported in Europe CSCs? What if I pick XAA instead of local one?
2) Any idea how to update to Pie and unlock OTA/Samsung Pay/Secure folder etc.? What is the correct formula to understand which combination file to use before flashing latest Pie 950U1 XAA ROM G950U1UEU5DSC1?
Nobody able to help at least slightly?
i have the same problem with my s8 , thar has csc of hong kong tgy and won't me let download the last updates also i can't open samsung health secure folder s pay ect....any solution ??! ,, thanks in advance
I have the same issue. Phone name is SM-G950U but CSC is TGY (Hongkong). It can not be updated via OTA and I don't know what is its correct CSC.
Rooted Extreme Syndicate s8 g590U (update to BST CSC)
TheMadScientist said:
Xaa is unlocked firmware. I think xas is sprint. But the third vzw means your sales code is verizon so you should be getting updates from them. You can use sammobile or updato get the latest and flash home csc with your sim in and it should go to your carrier. 5th digit from end is bootloader revision thats what you have to pay attn to. As long as you get revision 5 firmware ypur gold. We have locked bootloaders so you cant really brick with odin. You have to flash a rev 5 combination file then the u1 firmware which is the unlocked firms
So what i think is you got a sprint phone with unlocked firmware but with verizon as a sales code for end user if im not mistaken... If thats the case it is most def unlocked sim wise.
Click to expand...
Click to collapse
Will this work for my Rooted Extreme Syndicate s8 g590U nougat? mine says BST/BST/VWZ. (not able to receive SMS texts) Possible to flash DTA6 home CSC without breaking root to update my carrier?
Related
So I got an ATT S8 the G950U version. I unlocked it via ATT with their unlock code.
since then using it on Indian carrier Airtel. I am not been able to get any software updates. Whenever I check for the updates it says its up to date. But its stuck at build number G950USQU1AQC9 and security patch of 1 march 2017.
How do I update this? Do I need to flash ATT software via ODIN? but I need to retain the unlocked status.
You wont get OTA unless you have an ATT sim in it i Think. Just flash G950U1 firmware which is the unlocked version sold by samsung.
I bought a sprint s8 and flashed G950U1 firmware and using on Airtel. Moreover you wont have any carrier bloatware.
It seems Smart Switch also updates when applying initialize. Not connecting your phone before starting up SS gives you the option to input model - and serial #.
And to my knowledge, once unlocked (free to use any SIM) stays unlocked.
suryakiran_r said:
You wont get OTA unless you have an ATT sim in it i Think. Just flash G950U1 firmware which is the unlocked version sold by samsung.
I bought a sprint s8 and flashed G950U1 firmware and using on Airtel. Moreover you wont have any carrier bloatware.
Click to expand...
Click to collapse
Did you flash it with Odin? AFAIK its the only way for snapdragon models. Been away from android tinkering for a long while. Can you point me to relevant threads?
P.S. Are you able to get OTA now?
I have a similar issue but in the UK. Can't see OTA updates and it says up to date in Smart Switch. Is flashing the stock firmware risky or break knox? What are my options?
Search Updato.com for the latest G950U1 firmware. (XAA version is the best region to use in your case). Use THIS version of Odin to flash: http://dl.psouza4.com/android/Odin3_v3.12_PrinceComsy.zip
You will not get updates normally if you don't. Your phone is trying to contact AT&T servers but you don't have their sim card so it's not going to let you download it.
joe3681 said:
Search Updato.com for the latest G950U1 firmware. (XAA version is the best region to use in your case). Use THIS version of Odin to flash: http://dl.psouza4.com/android/Odin3_v3.12_PrinceComsy.zip
You will not get updates normally if you don't. Your phone is trying to contact AT&T servers but you don't have their sim card so it's not going to let you download it.
Click to expand...
Click to collapse
Be careful, the latest u1 firmware is a rev2 bootloader. It will probably be rootable like the n8 one is but no one has confirmed yet. There are also no ready to flash rooted ROMs with it
Root is worthless anyway.
Hello, i am using ATT Galaxy S8 SM-G950U Unlocked Phone. When i am going to search any new update or firmware for my phone, i rarely find them even in sammobile I find most T mobile, verizon, sprint updates or firmware than ATT. So can i use other carrier rom for my device Or i have to stick with this ATT? Currently im using may 2018 firmware for my device. I searched a lot for newer firmware but couldnt get any. And can u tell me when the pie update will come for this device.
Also can i install pie beta on my phone? Bcoz its tells that it will work on snapdragon but doesnt tell att or t mobile or verizon...
ariyangd said:
Hello, i am using ATT Galaxy S8 SM-G950U Unlocked Phone. When i am going to search any new update or firmware for my phone, i rarely find them even in sammobile I find most T mobile, verizon, sprint updates or firmware than ATT. So can i use other carrier rom for my device Or i have to stick with this ATT? Currently im using may 2018 firmware for my device. I searched a lot for newer firmware but couldnt get any. And can u tell me when the pie update will come for this device.
Also can i install pie beta on my phone? Bcoz its tells that it will work on snapdragon but doesnt tell att or t mobile or verizon...
Click to expand...
Click to collapse
Al Us s8s are the same there are guids for carrier switching but all the recent formwares are on updato or sammobile. Should be able try try the pie beta. Im stuck on 7..0 since im rooted so no pie for I ???
TheMadScientist said:
Al Us s8s are the same there are guids for carrier switching but all the recent formwares are on updato or sammobile. Should be able try try the pie beta. Im stuck on 7..0 since im rooted so no pie for I ???
Click to expand...
Click to collapse
But in sam mobile and updato i find all carrier firmware except att. And thats worrying me much. I want to update but theres no att firmware. And if i use others firmware will i face any problem?
ariyangd said:
But in sam mobile and updato i find all carrier firmware except att. And thats worrying me much. I want to update but theres no att firmware. And if i use others firmware will i face any problem?
Click to expand...
Click to collapse
Other firmwares will work you might just be missing features like WiFi calling. I don't know the exact dialer code but they is a preconfig dialer code to select csc so once you got the latest you could try that. All the firnwares are identical for each us model you wont brick from flashing another carriers
So thats yes right? I can use other carrier rom without any problem?
please some one answer... my device is att s8 smg950u. so can i use smg950u1 firmware to flash 950u?
ariyangd said:
please some one answer... my device is att s8 smg950u. so can i use smg950u1 firmware to flash 950u?
Click to expand...
Click to collapse
As long as it's unlocked. A g950 u. U1 and w all can use any csc from carrier firmware. Pop your sim in and flash your carriers csc from firmware
My phone is G950U but it's made in China and works fine with Bulgarian SIM. I have no info about the original carrier. CSC code is TGY, can I flash G950U1 with CSC XAA (Unlocked)?
MrMef said:
My phone is G950U but it's made in China and works fine with Bulgarian SIM. I have no info about the original carrier. CSC code is TGY, can I flash G950U1 with CSC XAA (Unlocked)?
Click to expand...
Click to collapse
Did you read my previous post
TheMadScientist said:
Did you read my previous post
Click to expand...
Click to collapse
Yes, the thing is I don't have my carrier CSC available for download since I'm using it in Europe. Wondering if I need to revert flash how to source TGY (Hong Kong) factory rom? Seems all available for download are US-based CSCs only.
My main concern is OTA is currently failing completely, I am hoping to restore by moving away from the TGY code, does that need carrier switching process or just flash 950U1 on top including user data ?
MrMef said:
Yes, the thing is I don't have my carrier CSC available for download since I'm using it in Europe. Wondering if I need to revert flash how to source TGY (Hong Kong) factory rom? Seems all available for download are US-based CSCs only.
My main concern is OTA is currently failing completely, I am hoping to restore by moving away from the TGY code, does that need carrier switching process or just flash 950U1 on top including user data ?
Click to expand...
Click to collapse
Im pretty sure u1 model pretty much is csc-less i would try to flash the u1 firmware directly and flash the home csc in u1 firmware which should leave it open. BL" "AP" "CP" "CSC" is all you should flash. User data would add a carrier. If you dont it will leave it open.....
If updates are all your lookong for. Just use odin to manually update
TheMadScientist said:
Im pretty sure u1 model pretty much is csc-less i would try to flash the u1 firmware directly and flash the home csc in u1 firmware which should leave it open. BL" "AP" "CP" "CSC" is all you should flash. User data would add a carrier. If you dont it will leave it open.....
If updates are all your lookong for. Just use odin to manually update
Click to expand...
Click to collapse
I tried 950U XAS and 950U1 downloaded with SamFirm and all versions of Odin but all failed . Strange my S7 from Verizon is able to use OTA in Bulgaria but not this Hong Kong S8.
MrMef said:
I tried 950U XAS and 950U1 downloaded with SamFirm and all versions of Odin but all failed . Strange my S7 from Verizon is able to use OTA in Bulgaria but not this Hong Kong S8.
Click to expand...
Click to collapse
You are either using the wrong odin or a older firmware.
Or. To flash unlocked firmware you must first flash the combination file then unlocked firmware.
I have a Sprint Galaxy s8, but I am no longer on Sprint.
Is it possible for me to flash the unlocked ROM, effectively making it SM-G950U1?
My current build nnumber: R16NW.G950USQU5CSA4
I'm hoping when it's available I can flash to the Pie version of G950U1.
lioncat55 said:
I have a Sprint Galaxy s8, but I am no longer on Sprint.
Is it possible for me to flash the unlocked ROM, effectively making it SM-G950U1?
My current build nnumber: R16NW.G950USQU5CSA4
I'm hoping when it's available I can flash to the Pie version of G950U1.
Click to expand...
Click to collapse
Only if Sprint unlocked the device through uicc unlock. If you flash u1 on a locked it's still stuck to the original carrier. As for guides there are several guides in the general section for carrier switching
lioncat55 said:
I have a Sprint Galaxy s8, but I am no longer on Sprint.
Is it possible for me to flash the unlocked ROM, effectively making it SM-G950U1?
My current build nnumber: R16NW.G950USQU5CSA4
I'm hoping when it's available I can flash to the Pie version of G950U1.
Click to expand...
Click to collapse
Yes it is. I just did it yesterday. I was on G950USQS5CSB1 and didn't get wifi calling or VoLTE on Mint Mobile but after flashing G950U1 I now have them.
Since you say you are no longer on Sprint I assume you just want the unbranded G950U1 firmware.
Using samfirm on your computer putin G950U1 as phone and XAA as CSC and search. You should get G950U1UES5CSB2. It is the latest and has the same bootloader as you. Download it.
Download and use the 3B modded version of Odin.
Back up your phone as it will be wiped.
study here how to use Odin..... there are many guides
Use the CSC file not Home_CSC.
Have the sim of your current carrier in the phone when you flash.
6shuter said:
Yes it is. I just did it yesterday. I was on G950USQS5CSB1 and didn't get wifi calling or VoLTE on Mint Mobile but after flashing G950U1 I now have them.
Since you say you are no longer on Sprint I assume you just want the unbranded G950U1 firmware.
Using samfirm on your computer putin G950U1 as phone and XAA as CSC and search. You should get G950U1UES5CSB2. It is the latest and has the same bootloader as you. Download it.
Download and use the 3B modded version of Odin.
Back up your phone as it will be wiped.
study here how to use Odin..... there are many guides
Use the CSC file not Home_CSC.
Have the sim of your current carrier in the phone when you flash.
Click to expand...
Click to collapse
This is exactly what I'm doing. Switched to Mint, but don't heav Wifi or VoLTE. Glad to hear that G950U1 works with both those (was worried I would have to flash TMO to get it).
Thanks again!
Hey Everybody,
So I've come to realize that my unlocked US S10+ on AT&T didn't have VOLTE or Wifi calling as options in the communication/call settings menus. this is pretty disappointing as it seems that using the unlocked phone with Verizon you get these features, and they make a decent impact on my use of the phone.
My understanding is if I flash the ATT firmware to the phone I would get the functions, so being an amateur I followed some simple guides to SamFirm AND ODIN, and downloaded the ATT CSC firmware for my model number. However after going through the Odin process and resetting my phone it is still showing the same Software information as prior to my installation, and I do not have the features.
I saw a thread on the board stating that the ATT firmware isn't available yet, so I'm not sure if what I downloaded was actually any different than what is on my phone,and my phones "Service Provider Software Version" did already have ATT in the description, which is a bit confusing to me.
Am I correct in understanding the only way to get the features would be through a firmware flash? And would anyone know if I had flashed the right firmware, and what the original firmware CSC would be for my model if I needed to revert?
My information is:
Model Number:
SM-G975U1 (S10+ ceramic white 512GB - Unlocked US)
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
Firmware file obtained from SamFirm:
SM-G975U1_1_20190225093814_9wyh9qbuyg_fac
AP file name for reference:
AP_G975U1UEU1ASBA_CL15445662_QB22243196_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar
If it's anything like the S9 was, you can't just ODIN the firmware/CSC. You'll just get the bloat with none of the features you want.
Goronok said:
If it's anything like the S9 was, you can't just ODIN the firmware/CSC. You'll just get the bloat with none of the features you want.
Click to expand...
Click to collapse
I've heard this as well. If you want those features on a Samsung phone, it has to be at&t branded. I ordered an at&t phone from Samsung since I make good use of wifi calling. It works fine on my unlocked P3XL but no dice on the Samsungs.
I have the same phone and service and when I went to update my imei they told me it could not find the phone. So I was without lte/4g for a day until I gave them a imei to a s8 active. Now I have data at least
Darthshadow666 said:
Hey Everybody,
So I've come to realize that my unlocked US S10+ on AT&T didn't have VOLTE or Wifi calling as options in the communication/call settings menus. this is pretty disappointing as it seems that using the unlocked phone with Verizon you get these features, and they make a decent impact on my use of the phone.
My understanding is if I flash the ATT firmware to the phone I would get the functions, so being an amateur I followed some simple guides to SamFirm AND ODIN, and downloaded the ATT CSC firmware for my model number. However after going through the Odin process and resetting my phone it is still showing the same Software information as prior to my installation, and I do not have the features.
I saw a thread on the board stating that the ATT firmware isn't available yet, so I'm not sure if what I downloaded was actually any different than what is on my phone,and my phones "Service Provider Software Version" did already have ATT in the description, which is a bit confusing to me.
Am I correct in understanding the only way to get the features would be through a firmware flash? And would anyone know if I had flashed the right firmware, and what the original firmware CSC would be for my model if I needed to revert?
My information is:
Model Number:
SM-G975U1 (S10+ ceramic white 512GB - Unlocked US)
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
Firmware file obtained from SamFirm:
SM-G975U1_1_20190225093814_9wyh9qbuyg_fac
AP file name for reference:
AP_G975U1UEU1ASBA_CL15445662_QB22243196_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar
Click to expand...
Click to collapse
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
So I have the same service provider software, on my unlocked s10+, however when I went into an ATT store and looked at a branded S10+
I noticed the service provider software version to be : SOAMC_SM-G975U1_OYM_ATT_PP_0033( thirty three at end),
so anyway to update the service provider version? does that come from the SIM ??
I have an unlocked S10 plus and I flashed the AT&T Firmware. I now have VoLTE and WiFi calling unlocked on my phone using AT&T. You need to make sure you flash the U version of the firmware, not the U1 one. Unlocked S10 is using the U1 firmware already so flashing that one again changes nothing.
beethoven1854 said:
I have an unlocked S10 plus and I flashed the AT&T Firmware. I now have VoLTE and WiFi calling unlocked on my phone using AT&T. You need to make sure you flash the U version of the firmware, not the U1 one. Unlocked S10 is using the U1 firmware already so flashing that one again changes nothing.
Click to expand...
Click to collapse
Where did you get the att firmware?
Sent from my SM-G975U using Tapatalk
I kinda doubt it but did any of you with unlocked phones that flashed the AT&T firmware get any better service? I've been considering it to get VOLTE but just wondered
jamgam said:
I kinda doubt it but did any of you with unlocked phones that flashed the AT&T firmware get any better service? I've been considering it to get VOLTE but just wondered
Click to expand...
Click to collapse
I followed this thread https://forum.xda-developers.com/galaxy-s10/how-to/att-ota-ota-updates-t3909697
At first like you I downloaded the wrong version and nothing changed. I finally flashed G975USQU1ASBA and now have VOLTE/WIFI Calling and of course all of the bloat. But at least those two functions are working. Make sure that you complete a clean flash when I did a dirty flash I had problems sticking on the loading screen.
I believe you just need to call in ATT to take care those carrier specific features .
Which firmware can I flash with Odin to my S10+ Xfinity Mobile unlocked to get AT&T OTA updates? Currently have ASF7 flashed from the latest unknown firmware uploaded to Sammobile. I flashed w/o USERDATA. I just want to be able to get future OTA updates as I just switched my carrier from Metro by T-Mobile to AT&T. I was using U1 US unlocked firmwares on my Note9 & S10+ but want to use carrier perks now with AT&T.
What's with AT&T being the only ones to not release update files? You would think they all would be required to release them. More AT&T customers need kick up a fuss about it.
Hello, I have a Samsung S8 that I bought unlocked at Best Buy 2 years ago in USA. It was with android 7.0 at that time.
I can't receive updates automatically now because I flashed it with ODIN last year to get Android 8.0 before the carrier that I use was ready to offer it. So the updates won't be automatic anymore.
So my phone is an unlocked one and I tought that the model # was supposed to be SM-G950U1 when it's factory unlocked but mine is SM-G950U. How can that be possible? I looked at my phone specs and my CSC is still XAA so it's really unlocked. I want to install Andoid Pie manually and I don't know what firmware to use on SAMmobile to flash it to android P because none of the files for the SM-G950U is with CSC XAA. Only SM-G950U1 have XAA firmare available. I don't want to lock my phone to a particular carrier.
Another thing I tried to update my phone: I used a series of firmware updates available at firmware.science. The problem is that the last update I did was from G950USQU4CRE9 to G950USQU5CRG1. If I want to continue the chain of updates, the next available step is from G950USQU5CRG3 so I'm blocked because I'm at G950USQU5CRG1. What can I do to go further in my update process?
Ultimately I want to be able to automatically update my phone to android Pie.
Thanks!
Pocket_Frank said:
So my phone is an unlocked one and I tought that the model # was supposed to be SM-G950U1 when it's factory unlocked but mine is SM-G950U. How can that be possible? I looked at my phone specs and my CSC is still XAA so it's really unlocked. I want to install Andoid Pie manually and I don't know what firmware to use on SAMmobile to flash it to android P because none of the files for the SM-G950U is with CSC XAA. Only SM-G950U1 have XAA firmare available. I don't want to lock my phone to a particular carrier.
Thanks!
Click to expand...
Click to collapse
You can use SamFirm, SamMobile or Updato to download SM-G950U firmware G950USQU5DSC1. (Don't download G950USQS5CSB1 which is for Sprint or Verizon.) That firmware file includes all CSCs for US carriers and the one that gets used depends on the sales code in your phone, which is XAA in this case. Flash that firmware in Odin and you should be fine.
Oh, and I am 100% sure that the G950U firmware includes the XAA CSC... It's installed on my phone right now!
Hai Karate said:
You can use SamFirm, SamMobile or Updato to download SM-G950U firmware G950USQU5DSC1. (Don't download G950USQS5CSB1 which is for Sprint or Verizon.) That firmware file includes all CSCs for US carriers and the one that gets used depends on the sales code in your phone, which is XAA in this case. Flash that firmware in Odin and you should be fine.
Oh, and I am 100% sure that the G950U firmware includes the XAA CSC... It's installed on my phone right now!
Click to expand...
Click to collapse
Thanks for the quick answer!
I looked on updato and the link for the update doesn't work. On SAMmobile I see 7 different countries/carriers for the file G950USQU5DSC1 for the SM-G950U. Which one should I get? None of the is XAA.
Thanks!
Pocket_Frank said:
I looked on updato and the link for the update doesn't work. On SAMmobile I see 7 different countries/carriers for the file G950USQU5DSC1 for the SM-G950U. Which one should I get? None of the is XAA.
Click to expand...
Click to collapse
It shouldn't matter. Choose the T-Mobile one (TMB) and you should be fine.
Hai Karate said:
It shouldn't matter. Choose the T-Mobile one (TMB) and you should be fine.
Click to expand...
Click to collapse
Ok, I'll try that one. Thanks!
Hai Karate said:
It shouldn't matter. Choose the T-Mobile one (TMB) and you should be fine.
Click to expand...
Click to collapse
It worked perfectly. Thanks!
I am currently on G950U and CRE9 (same specs as you have) could you please help me to get on Android P on my phone well i am not from US. A step by step guide is appreciated because i am a noob in this matter. Waiting for the reply
AfraSyabAhMad said:
I am currently on G950U and CRE9 (same specs as you have) could you please help me to get on Android P on my phone well i am not from US. A step by step guide is appreciated because i am a noob in this matter. Waiting for the reply
Click to expand...
Click to collapse
Hello, all I did was to choose the right firmware on SAMmobile (https://www.sammobile.com/firmwares/galaxy-s8/SM-G950U/TMB/download/G950USQU5DSC1/264390/), download it and follow each step to update with ODIN like you can see by searching on Google "How to Install Samsung Galaxy S8/S8+ Android Pie (One UI) Update".
I'm not in US even if I bought my phone in the US and it works in Canada with any carrier with the firmware from T-mobile. That is all I can tell you about how to choose the right firmware.