Related
I'm still wary, but the following article mentions how the Edge's curved display should be able to withstand drops:
http://www.zdnet.com/galaxy-note-edge-curved-display-can-withstand-drops-samsung-7000033342/
My biggest concern is micro scratches. Dry screen protectors and tempered glass seem unlikely with this phone.
I hate cases so the prospect of going "naked" with the edge seems full of potential despair.
I sure hope so.
I want this phone very bad. I'm coming from a note 3 and see it a better upgrade to the edge then the note 4.
I also hope some screen protectors are released day one.
I also am concerned about minor scratches as well. What I'm hoping is that there will be a company that releases a glass screen protector for the Edge which I plan to get and then place it in a sturdy case such as Urban Armor Gear(fingers crossed that they release a case for this phablet as well).
Btw to be clear the internals may survive but the outer glass would not. I imagine screen replacement being very costly since you can't cheaply make substitute glass no ?
xManMythLegend said:
Btw to be clear the internals may survive but the outer glass would not. I imagine screen replacement being very costly since you can't cheaply make substitute glass no ?
Click to expand...
Click to collapse
I believe it would be the same as other phones.
I just replaced a s4 glass today. The guy got the glass from ebay for $5.
It's pretty much just glass . And the edge would just be curved.
I do hope there is some great bumper case made tho.
Sent from my SM-N900T using XDA Free mobile app
But aren't screen, touchpanel and protection glass one unit, glued together, not intended to get seperated or partly replaced?
Btw. I already saw several Note EDGE screen protector films out there. Like this one:
http://www.amazon.com/Skinomi®-TechSkin-Replacement-Definition-Anti-Bubble/dp/B00NAJ08YG
I don't think it needs rocket science to produce curved screen protectors for the Edge.
And btw: also a screen protector will likely not save the screen when e.g. dropping on a stone.
And the factory glass/protection is very scratch resistant.
My Galaxy S4 is blemished all around, but the screen still looks like brand new.
Wishmaster2 said:
But aren't screen, touchpanel and protection glass one unit, glued together, not intended to get seperated or partly replaced?
Btw. I already saw several Note EDGE screen protector films out there. Like this one:
http://www.amazon.com/Skinomi®-TechSkin-Replacement-Definition-Anti-Bubble/dp/B00NAJ08YG
I don't think it needs rocket science to produce curved screen protectors for the Edge.
And btw: also a screen protector will likely not save the screen when e.g. dropping on a stone.
And the factory glass/protection is very scratch resistant.
My Galaxy S4 is blemished all around, but the screen still looks like brand new.
Click to expand...
Click to collapse
Maha hahah.
This helps confirm the nov release of the note egde.
Why would they release a screen protector way before the phone is out.
But Yea the plastic protectors don't stop the screen from cracking they just stop straches.
I would thing that the edge would chip before it just broke. But there is no telling till it comes out and people do some drop testes.
I also hope there are some good cases to protect that edge
*edit
O Yea it's not hard to make curved protectors. My htc sensation had a drip in the middle so the protector had a curve in the middle. It's pretty easy to make just vaccum forming.
Sent from my SM-N900T using XDA Free mobile app
hi guys,
was wondering if anyone has found a good tempered glass to use with the s7 edge zerolemon case. all the one's i have tried keep peeling up once i place the phone back into the case. Please help if anyone has successfully been able to use tempered glass with this case. Thanks in anvance
twodollars2 said:
hi guys,
was wondering if anyone has found a good tempered glass to use with the s7 edge zerolemon case. all the one's i have tried keep peeling up once i place the phone back into the case. Please help if anyone has successfully been able to use tempered glass with this case. Thanks in anvance
Click to expand...
Click to collapse
As far as I'm aware, the consensus is that tempered glass protectors with the S7 Edge and the majority of cases simply don't work.
FYI, I've tried quite a few different protectors and cases here in the UK with next to no luck.
Just thought I'd inform you of my experience
So here's what I'm using.
https://www.amazon.com/gp/product/B01MZ02Y2I/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
It was easy to install and hardly noticeable.
The screen looses sensitivity and makes texting slightly difficult at times but still tolerable after you get used to it.
I also have an Otterbox Defender. I peeled the annoying screen protector off of that and installed this tempered glass protector then installed the case.
Flawless fit! Don't know anything about Zerolemon cases though.
Nevertheless, I'm very satisified with my tempered glass protector.
Also... perhaps your inquiry would have been better posted here: https://forum.xda-developers.com/s7-edge/accessories/curved-tempered-glass-screen-protector-t3320688
I used the original zagg glass and trimmed a bit off of the zerolemon case at the bottom chin.
It fits fine without modification with the new zagg glass.
I went to the extreme on this case because I been through more screen protectors than I should have. What I did was trim down the inner lip of the case that touches the screen. I used a slightly sharp exacto knife and slightly trimmed away all the hard edges surrounding the phone a little at a time. Doesn't take much trimming to get it to work. Mine looks not all that perfect but now my screen protector is good no problems
I'm on the same boat and unless there's a screen protector that only covers the screen and doesn't go up to the four corners, I don't think there are any screen protectors out there right now that won't get pushed in by a case.
How is it that no one has ever heard of GPEL tempered glass
(GEN 2) for the s7 edge. its amazing!!!
mine broke once & they even sent me a free replacement too!
grem323 said:
How is it that no one has ever heard of GPEL tempered glass
(GEN 2) for the s7 edge. its amazing!!!
Click to expand...
Click to collapse
Here's a review of the GPEL one. It's not a positive one.
"Review of the GPEL Tempered Glass Screen Protector for the Samsung Galaxy S7 Edge"
https://youtu.be/FZxTsYOQdak
i've had this tempered glass for about 2.5 months now. I use it with the samsung leather case & the ringke slim case.
as long as you dont use a case that extends/overlaps over the edges this works beautifully!!
i wouldnt mind buying this again! Highly recommended!
---------- Post added at 08:44 AM ---------- Previous post was at 08:42 AM ----------
the glass reviewed in the above video is gen 1 which i admit did have issues.
they had fixed most gripes with gen 2 since!
Zagg Invisible Shield glass curve for S7 Edge rocks!
mutiny said:
I'm on the same boat and unless there's a screen protector that only covers the screen and doesn't go up to the four corners, I don't think there are any screen protectors out there right now that won't get pushed in by a case.
Click to expand...
Click to collapse
I ran into the same thing, but I found the Zagg Invisible Shield glass curve for S7 Edge. It is expensive, but it is a bit smaller than the others so most cases don't affect it and work fine. I'm currently using it with the SUPCASE Unicorn Beetle Hybrid case.
So far this is the only curved glass screen protector that works with anything more than a minimal case.
Here's the link to the screen protector:
https://www.zagg.com/us/en_us/invis...xy-s7-edge/glass-curve-samsung-galaxy-s7-edge
and the case:
https://www.amazon.com/SUPCASE-Unic...s=Galaxy+S7+Edge+Case,+SUPCASE+Unicorn+Beetle
The stock screen protector is rubbing off so I replaced it with a new one.
https://www.amazon.com/gp/product/B01N3ZTMLG/ref=od_aui_detailpages00?ie=UTF8&psc=1
Unlike the stock one, this one is the hard glass. (the stock one is a film).
The problem with this screen protector is that it is a grease/finger print magnet. Ususally I can remove the grease/finger print from the screen by rubbing it on my shirt. With this one, it just moves the finger print grease around. No my shirt is not greasy because I tried it on another phone and it didn't smear the grease around. The only way to get a clean screen is if I use a micro fiber clothe with some water. Also I noticed that my screen is not as bright as before with the new screen protector, especially when using it outdoors.
I was thinking about remove the screen protector all together. Since our phone has Corning® Gorilla® Glass 3, it "should" be fine. But before I remove the new screen protector, just wondering if anyone is going bare on the screen and if they have any issues with scratched screen.
Thanks
I haven't had any screen protector on my phone since october. Screen is fine, although I haven't dropped my phone.
I have been using the same screen protector which i bought from aliexpress and i can feel the brightness problem but i am fine with it since this tmp glass removes entirely the ugly black borders from the phone.
I dont know if there is a good color tempered glass which does both.
Just removed the aftermarket screen protector today and going bare. So far it seems fine and resistant to scratches as well. It feels a lot better than the stock screen protector or the aftermarket one. It is a lot brighter and really smooth. Another thing that I noticed is that it is a lot more sensitive to the touch.
Never used any sort of screen protector on my phones. Never a single scratch.
As long as you do not put any other items in a pocket with a phone, it should be fine.
I have tried 3-4 different screen protectors and none of them seem to stick properly. They never want to stick on either (or both) the left and right sides of the screen. idk what the issue is but I've never had that problem on other phones
I'm too afraid to not use any screen protector. The camera lens scratches so easily that I don't trust the glass at all.
Sent from my LEX727 using Tapatalk
The stock screen protector is rubbing off so I replaced it with a new one.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Unlike the stock one, this one is the hard glass. (the stock one is a film).
The problem with this screen protector is that it is a grease/finger print magnet. Ususally I can remove the grease/finger print from the screen by rubbing it on my shirt. With this one, it just moves the finger print grease around. No my shirt is not greasy because I tried it on another phone and it didn't smear the grease around. The only way to get a clean screen is if I use a micro fiber clothe with some water. Also I noticed that my screen is not as bright as before with the new screen protector, especially when using it outdoors.
I was thinking about remove the screen protector all together. Since our phone has Corning® Gorilla® Glass 3, it "should" be fine. But before I remove the new screen protector, just wondering if anyone is going bare on the screen and if they have any issues with scratched screen.
Click to expand...
Click to collapse
I Have the same problem. While the screen protector is ok and protects the phone, it catches fingerprints and the most anoying thing, outside it reflects everything and I can't see very well. I didn't find any matte or anti-glare tempered glass screen for le pro 3. Only iphone and something else. If anyone finds something good post a link please.
motanel_pufos said:
I Have the same problem. While the screen protector is ok and protects the phone, it catches fingerprints and the most anoying thing, outside it reflects everything and I can't see very well. I didn't find any matte or anti-glare tempered glass screen for le pro 3. Only iphone and something else. If anyone finds something good post a link please.
Click to expand...
Click to collapse
It has been a week now since I removed all screen protector and I am happy that I did it. It feels so much better and I can say that the gorilla glass on this is legit. I work in a warehouse and I have my keys and a box cutter in my pockets. I try to keep them away from my phone but when you are moving fast, sometimes the box cutter ends up in the same packet as my phone. So far still no scratch on the screen.
I'm still keeping mine, even if reflects everything because on my old phone covered with full cover, front and back, dropped on a corner of the screen, the screen protector took the fall and broke instead of the actual screen. So better to be cautios.
Mine came with a screen protector (X727), but I ripped it off very quickly. I haven't broken a single smartphone yet.
No screen protector since day one. No case either. Dropped it few times and cosmetic glass around camera cracked. Front screen is pristine, which is surprising since I am not careful with it.
Sent from my LEX727 using Tapatalk
Found these cases on Amazon that provide screen protection. I have used similar cases on other devices and have had good luck in preserving the screen without the use of a screen protector:
kw mobile canvas case
kw mobile cover shell case
Never used any screen protector on my smartphones, since my first Sony Ericson P800 years before the first iPhone were released...
Never broke the screen, had a few small scratches on some of them (not all though), and I usually keep my devices for 3 to 4 years. My previous phone was a Samsung Note 2, the screen is still perfect.
I will not put any screen protector on my Le Pro 3 either...
I was using the stock screen protector which was preinstalled until today. Sand scratched it so I removed it.
Sent from my LEX727 using Tapatalk
Is anyone having issues with corners of your tempered glass protectors not adhering properly? I'm getting white ghosting all around the protector. Replacement ones had the same effect...
RussianBear said:
Is anyone having issues with corners of your tempered glass protectors not adhering properly? I'm getting white ghosting all around the protector. Replacement ones had the same effect...
Click to expand...
Click to collapse
Same problem for me.I think its because of the curve of the screen
I got the full coverage one from aliex, no problems with adhesion, but it's an awfull magnet for smudges and fingerprints, and dulls the colors of the screen, gonna run it a few days just for kicks, but I'll remove it for sure.
And oh, havent had a screen protector, not since day one, and no problems, not a scratch on my phone (I do take care of my gadgets though)
Valinos said:
Same problem for me.I think its because of the curve of the screen
Click to expand...
Click to collapse
mine doesn't even cover the screen fully...baffled by this, honestly.
I removed screen protector today. Got sick of dust and other sht all around due to corners of glass not adhering properly. The phone looks much better, so far so good.
Just in case try to avoid keeping it with keys etc. Also check this .
I have purchased an S8+ recently and ordered some cheap cases and screen protectors off ebay. The problem is that they pick up fingerprints and look weird around edges where the adhesive is. Can anyone recommend and good screen protectors that can be bought in the UK? I'd prefer them to be case friendly as well. Thanks.
I use these with my Spigen thin case.
They have wings so tuck under the case stopping edge lift.
Samsung Galaxy S8 Screen Protector, Invisible Defender [Full Coverage][2-Pack] Edge to Edge Curved Side Coverage Guaranteed [Case Compatible] Super Th https://www.amazon.co.uk/dp/B071CDJBJ1/ref=cm_sw_r_cp_apap_Jd44jGqXHOFUC
Not perfect, but best I have tried yet.
mgbosshogg said:
I use these with my Spigen thin case.
They have wings so tuck under the case stopping edge lift.
Samsung Galaxy S8 Screen Protector, Invisible Defender [Full Coverage][2-Pack] Edge to Edge Curved Side Coverage Guaranteed [Case Compatible] Super Th https://www.amazon.co.uk/dp/B071CDJBJ1/ref=cm_sw_r_cp_apap_Jd44jGqXHOFUC
Not perfect, but best I have tried yet.
Click to expand...
Click to collapse
Yes, I've read about these but forgot about them! Thanks for this, will definitely get them.
The tech 21 screen protectors are really really nice. I have 1 on my S8 and it's fantastic even with fingerprints. It's very case friendly I have yet to have any issues with it yet.
I use Samsungs OEM screen protector.
I bought mine in Switzerland. It is a "Panzerglass" one. The phone already fell hard on the ground and the screen protector didn't even scratched, it also doesn't catch fingerprints easily.
I've tried quite a bit of screen protectors, invisible defender, white stone, spigen etc and I ended up returning them all. It's going to be trial and error for you; it's highly subjective and what you will like compared to others.
There is an XDA forum dedicated to the S8+ (rather than the S8), and there's an Accessories sub-forum within it where there are a number of threads dealing with screen protectors for the S8+
https://forum.xda-developers.com/galaxy-s8+/accessories
Just bought a galaxy s8, was having some problems with it, so verizon sent me a free glass tempered screen protector I just got it in the mail. I have a cheaper plastic one on it now. But I read the reviews that the verizon glass protector isn't really that good. What's your guys opinion? I got it free so value for the money isn't an issue, I just want to make sure it's gonna stay on and not have to put my finger though the screen to get it to work. Thanks guys.
Brandonjr36 said:
Just bought a galaxy s8, was having some problems with it, so verizon sent me a free glass tempered screen protector I just got it in the mail. I have a cheaper plastic one on it now. But I read the reviews that the verizon glass protector isn't really that good. What's your guys opinion? I got it free so value for the money isn't an issue, I just want to make sure it's gonna stay on and not have to put my finger though the screen to get it to work. Thanks guys.
Click to expand...
Click to collapse
I personally don't like glass screen protectors, but there are many people that do. The reason that I don't is that on screens that are curved, a lot of times the edges start to peel and you see a bubble, which isn't good. Manufactures have tried to make the screen protector a little smaller/narrower, so it stops when the edge starts to curve, but then again, it doesn't look good and I could feel the edge of the glass protector when swiping from the edge and it is annoying (IMO). If I buy a screen protector, I usually get something like Armorsuit military grade screen protector that you apply by spraying a solution and installing it. Gives you room to move the protector around until you find a perfect fit and then squeeze the water out. I don't drop my phones, so never had to test it, but I do see that this screen protector is much better and thicker than a regular thin plastic one.