Database Users

[ROOT]How to get root Moto G 2015 With Android Marshmallow 6.0 (worked in XT1541)

:fingers-crossed:How to get root Moto G 2015 With Stock Android Marshmallow 6.0 (XT1541)​
Hi guys. Now I have a Moto G 2015 XT1541 with previously unlocked bootloader (following Motorola Guide described here, be careful unlocking bootloader wipes everything!) with recently installed Europe Retail Stock ROM MM 6.0, but i was having some issues trying to install TWRP 3.0 and SuperSU 2.65....until now.
With latest SuperSU you will get bootloop, and probably you need to reinstall the stock rom completely.........but... ....This method works fine!
Try it yourself on XT1540, XT1542, XT1543, XT1544 and XT14548 variants
So, I have used TWRP twrp-osprey-2.8.7-r7.img for the recovery and Super SU Beta 2.62 (BETA-SuperSU-v2.62-3-20151211162651.zip) to get root on my device.
Get TWRP recovery and ROOT
Step 0: enter to developer options (tap 7 times the build number) and select Allowing USB debubbing and Allow OEM unlock options
Step 1: install TWRP 2.8.7-r7 entering to bootloader mode
Turn off the device, press power and volume down and wait for two seconds. device will show bootloader mode in black screen, connect it to the pc through usb cable
Step 2: Paste twrp2.8.7-r7.img file into folder \Android\sdk\platform-tools and rename it to recovery.img (this requires previously installed Android SDK Tools, but you can do the same with MinimalADB
open cmd in windows, navigate to the platform-tools folder location and write this line:
Code:
fastboot boot recovery.img
Wait until ok message appears in cmd
TWRP will appear, and press reboot System. Enter bootloader mode again and type in CMD the following:
Code:
fastboot flash recovery recovery.img
Wait until ok message appears in cmd. After that, press in bootloader mode the recovery option, you will enter to twrp and now new recovery becomes permanent, press Reboot system.
Step 3: copy BETA-SuperSU-v2.62-3-20151211162651.zip file into the device and after that, disconnect it from usb
Step 4: turn off the device, enter bootloader mode as stated in step 1, and select the recovery option with the volume up and down , press power button to enter to recovery and twrp will appear instead of original recovery.
Step 5: in twrp press install, select location of the Beta SuperSu File, select beta Super SU zip file and allow installation swipping to the right side and wait until it finish.
Step 5.1: after flash Super SU, wipe dalvik and cache through twrp, pressing the wipe dalvik/cache button located in left side.
Step 6: in twrp press button reboot now.
Wait a little while android rebuild the cache.
The device will enter to the home screen. check that super su app is installed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: if twrp offers to you install SuperSu dont let it. That causes a bug.
Step 7: Install Root checker and check if you are root.
Thats all folks!!
-------------------------------------------------------------------------------------------
Plus 1 - If something goes wrong you can reinstall Stock as described in this repair guides. Check here the firmware and here the reinstall instructions
Plus 2 - How to delete the Motorola annoying unlock bootloader message:
Step 0: connect the device to the pc, copy unlocked_logo.zip file into the device and after that, disconnect from usb
Step 1:
Turn off the device, press power and volume down and wait for two seconds. device will show bootloader mode in black screen
Step 2: In bootloader mode select with the volume up and down the recovery option, press power button to enter and twrp will appear
Step 3: in twrp press install, select location of the unlocked_logo.zip File, select that file and allow installation swipping to the right
Step 4: in twrp press reboot now. The device will boot without nagging window.

Excellent instructions. First time I saw detail to flash TWRP in a manner that does not revert back to stock recovery.
One recommendation, after the first boot to recovery, make a clean (pre-root, pre-cutom recovery) TWRP back up to your SD Card. If anything goes wrong, just flash this backup.

MrTooPhone said:
Excellent instructions. First time I saw detail to flash TWRP in a manner that does not revert back to stock recovery.
One recommendation, after the first boot to recovery, make a clean (pre-root, pre-cutom recovery) TWRP back up to your SD Card. If anything goes wrong, just flash this backup.
Click to expand...
Click to collapse
Thank you so much! you appreciate my work after several soft bricks and some bootloops something good result! :silly:

MrTooPhone said:
One recommendation, after the first boot to recovery, make a clean (pre-root, pre-cutom recovery) TWRP back up to your SD Card. If anything goes wrong, just flash this backup.
Click to expand...
Click to collapse
Man I wish read your advice last night before I used one of those automated programs to root (installed latest super su) and bootloop city. I figured I would make a backup right after rooting.
I recovered by installing a close to stock 5.11 rom with twrp but would like to get back to MM without starting from scratch.
Does anyone know of a Stock MM rom (not ASOP) that can be installed with twrp?

If you get that The phone is not allowed to unlocked The bootloader when i try, how can i unlocked it then
Skickat från min MotoG3 via Tapatalk

Hi can i use same method to root my moto g xt1550 6.0 2Gb version?
Pls reply.
And i there CWM recovery available instead of TWRP Recovery...
I like CWM.

moto g 3rd gen
did everything in tor says no such file or dorectory software status says modified does that have anything to do with it? I'm lost

Amirphp said:
Hi can i use same method to root my moto g xt1550 6.0 2Gb version?
Pls reply.
And i there CWM recovery available instead of TWRP Recovery...
I like CWM.
Click to expand...
Click to collapse
I have same question

Amirphp said:
Hi can i use same method to root my moto g xt1550 6.0 2Gb version?
Pls reply.
And i there CWM recovery available instead of TWRP Recovery...
I like CWM.
Click to expand...
Click to collapse
AniketDhoke said:
I have same question
Click to expand...
Click to collapse
yes you can use this method for xt1550
there is no CWM recovery for Osprey

how much time will it take to rebuild the cache..?? please tell me...after the process 40 mins has passed and still now my moto g3 has not turned on...it still on the boot screen .......

hkr008 said:
how much time will it take to rebuild the cache..?? please tell me...after the process 40 mins has passed and still now my moto g3 has not turned on...it still on the boot screen .......
Click to expand...
Click to collapse
I've had it do that on a new flash and I just held the power down until it shut off and when I turned it back on it boots normally.

Thanks, did not understand why the latest version not started, I see that you can not install a more current than version 2.65.
Enviado desde mi MotoG3 mediante Tapatalk

veloz46 said:
Thanks, did not understand why the latest version not started, I see that you can not install a more current than version 2.65.
Enviado desde mi MotoG3 mediante Tapatalk
Click to expand...
Click to collapse
Yes the tutorial is very clear versión 2.62-3 is the only one that works
Sent from my MotoG3 using Tapatalk

One tap root
Is any one tap root system available for moto g version 3 (2015) xt1550 running android 6.0 with build number mpi24.65-25 . need it desperately !

in STEP 2, if i use adb minimal i've not this folder \Android\sdk\platform-tools, where i put recovery.img? on minimal folder?
MrTooPhone said:
Excellent instructions. First time I saw detail to flash TWRP in a manner that does not revert back to stock recovery.
One recommendation, after the first boot to recovery, make a clean (pre-root, pre-cutom recovery) TWRP back up to your SD Card. If anything goes wrong, just flash this backup.
Click to expand...
Click to collapse
how i can do that?
thanks

sethgreen said:
" after the first boot to recovery, make a clean (pre-root, pre-cutom recovery)"
how i can do that?
Click to expand...
Click to collapse
Make sure you have a portable SD Card installed. Then simply boot TWRP, set back up location to SD Card, and make back up. If you never used TWRP, you may want to Google it and learn a little before your first attempt.

roouted my device, everything ok

Just to report, it worked on my XT1543 (dual sim, 1GB)
Enviado de meu MotoG3 usando Tapatalk

Couldn't get this to work on XT1541 with 24.44.1.osprey_reteu_reteu.en.EU reteu with the instructions mentioned in the first post.
I got things to work by using the latest SuperSU and forced it to install in system-less mode. This worked quite well.
1. First go to bootloader using power+volumedown or from PC:
Code:
adb reboot bootloader
2. Then boot TWRP (3.0.0-r2 in my case worked fine):
Code:
fastboot boot twrp-osprey-3.0.0-r2.img
3. Now copy SuperSU to the phone:
Code:
adb push BETA-SuperSU-v2.68-20160228150503.zip /sdcard/
4. Next make sure SuperSU will install in system-less mode:
Code:
adb shell
echo SYSTEMLESS=true > /data/.supersu
5. Install SuperSU by pressing "Install" in TWRP, select BETA-SuperSU-v2.68-20160228150503.zip and swipe. After installing you should see in the log that it used system-less mode. Now you can "Clear Cache/Dalvik" as well.
6. Now reboot. It should show the "Warning Bootloader Unlocked" screen once, then reboot, then show it again and this time it should continue booting into Android.

Hi guys, for me I had NO problem flashing "BETA-SuperSU-v2.62-3-20151211162651.zip" using "twrp-osprey-3.0.0-r2.img" on MPI24.65-33.1 Build number XT1541 (+ Allow OEM unlock options)

[Guide][X620/X626] How to Unlock Bootloader & Install TWRP & Root [MTK chipset]

[Guide][X620/X626] How to Unlock Bootloader & Install TWRP & Root [MTK chipset]
------------------------------------------------------------------------------------------------------
This Tutorial is for MTK chipset phones LeEco X620/X626
------------------------------------------------------------------------------------------------------
Prerequisites:
I) Battery charge 100%
II) You have installed windows 10 64-bit Operating System
III) Download and unzip to your PC: RECOVERY-TWRP_GS_BB72
PROCEDURE (Unlock Bootloader & Install TWRP):
1.) Go to Settings>About phone and hit the build number 7 times to unlock developer options menu.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Connect the smartphone to the PC via USB cable.
2.) Go to Settings>select Developer options>activate the three toggle Figure>
3.) Turn off the smartphone and enter into Fastboot mode by pressing simultaneously power button and volume less
4.) Click on adb_cmd.exe command contained in RECOVERY-TWRP_GS_BB72 folder and type fastboot oem unlock
5.) Click on flash_TWRP.bat command contained in RECOVERY-TWRP_GS_BB72 folder and Recovery will be flashed within a few seconds
7.) Disconnect the USB cable and pressing simultaneously power button and volume more to enter into TWRP recovery
(WARNING: a small written warning will alert us that the bootloader is unlocked, this type will appear from now on every time we will launch the TWRP)
Activate the toggle-Never show this screen During boot again and do the swipe from left to right to confirm the changes.
P.S.
Archive RECOVERY-TWRP_GS_BB72
contains new TWRP 3.0.2-0
Special thanks to: BB72
-----------------------------------------------------------------------------------------------
PROCEDURE (How to Root X620/X626):
I.) Download and copy in your phone
(SuperSU) Recovery Flashable.zip
II.) Turn off your phone.
III.) Pressing simultaneously power button and volume more enter into TWRP
IV.) Install (SuperSU) Recovery Flashable.zip without wipe.
V.) Reboot/System
----------------------------------------------------------------------------------------------
Translated and prepared by: laikexpert

[Guide][How to Full Wipe/Format] your phone [with TWRP Recovery]
https://forum.xda-developers.com/le-2/how-to/how-to-wipe-format-phone-t3546047
Translated and prepared by: laikexpert
-----------------------------------------------------------------
[Guide] How to solve notifications problem in EUI
https://forum.xda-developers.com/le-2/how-to/guide-how-to-solve-notifications-t3762705
Translated and prepared by: laikexpert

[X626] CUOCO92 [ROM 5.9.028S] Can be installed on [X620/X625] Multilingual
https://forum.xda-developers.com/le-2/development/x626-cuoco92-installed-multilingual-t3744201
LeEco X626
5.9.028S
-Multilingual ROM
-Comes with pre-installed Magisk
-No advertising and unnecessary chinese applications.
-GAPPS are built-in
------------------------------------------------------------------------------------
Based on Official Stock ROM 5.9.028S for MTK chipset phones LeEco
------------------------------------------------------------------------------------
OPTION:
------------------------------------------------
Install X626_CUOCO92_ROM
—---------------------------------------------—
on X620 / X625 phones
without any problems.
—---------------------------------------------—
Translated and prepared by: laikexpert

Is this one working on X625?

iamJASZ said:
Is this one working on X625?
Click to expand...
Click to collapse
Yes, normally.
My phone is X625

laikexpert said:
Yes, normally.
My phone is X625
Click to expand...
Click to collapse
Nice! Thanks.

This will format the internal storage right?

G4B33 said:
This will format the internal storage right?
Click to expand...
Click to collapse
This tutorial won't format the internal storage:
[ROM][X620/X626] How to Unlock Bootloader & Install TWRP [MTK chipset]

If you want to format internal storage
then use this tutorial:
[How to Full Wipe/Format] your phone [with TWRP Recovery]
https://forum.xda-developers.com/le-2/how-to/how-to-wipe-format-phone-t3546047

Questions About Installation
Thanks a lot for sharing this tool!
There are some concerns I want to figure out before I install that on mu daily phone. (by the way, it Le2 X620)
1. My current EUI ROM is version 5.9.028S, does the tool compatible with my phone ROM version?
2. Do I need to do any pre processing to my phone before I install it? Like root, clean...

There's latest stable TWRP 3.1.1 images on the 4pda forum .
Unfortunately you can't flash any custom EUI ROM on the X626 because you get the message:
"This ROM is only for X620 model"
Can someone post proper latest TWRP images for this phone?
As this one has a Grosso Shop labeling on it

TWRP 3.0.2-0
Use for the installation procedure!

TWRP 3.0.2-0
Use for the installation procedure!

adaa1262 said:
There's latest stable TWRP 3.1.1 images on the 4pda forum .
Unfortunately you can't flash any custom EUI ROM on the X626 because you get the message:
"This ROM is only for X620 model"
Can someone post proper latest TWRP images for this phone?
As this one has a Grosso Shop labeling on it
Click to expand...
Click to collapse
TWRP 3.0.2-0
Use for the installation procedure!

laikexpert said:
TWRP 3.0.2-0
Use for the installation procedure!
Click to expand...
Click to collapse
Yes I have TWRP 3.0.2-0 I've installed it from your post.
I was asking about TWRP v3.2 (the latest version)
If you're interested there's a TWRP v3.1 from some developers on 4pda but they'll won't work on Le S3 X626 as this message is displayed when installing a custom EUI ROM:
"This ROM is for X620 only please install the proper ROM for your device"

andycaco said:
Thanks a lot for sharing this tool!
There are some concerns I want to figure out before I install that on mu daily phone. (by the way, it Le2 X620)
1. My current EUI ROM is version 5.9.028S, does the tool compatible with my phone ROM version?
2. Do I need to do any pre processing to my phone before I install it? Like root, clean...
Click to expand...
Click to collapse
1.Yes
2.Check which recovery you have
-stock recovery
or
-TWRP recovery
already installed on your phone.

Hi! I have a x626 is not recognized in fastboot mode. I install TWRP with fastboot in various Le Max 2 and another x620 (in same computer). This phone don't enter into EUI or stock recovery but enter in fastboot mode. Writing the command FASTBOOT DEVICES the phone isn't listed. With FASTBOOT OEM UNLOCK or FASTBOOT FLASH RECOVERY xxxxxxx.IMG show the message: "waiting for device" and nothing more. Whats the matter?? Thank you very much!

El del 3.0 v6 said:
Hi! I have a x626 is not recognized in fastboot mode.!
Click to expand...
Click to collapse
Your possible problems:
-usb cable
-adb&fastboot drivers
-version of Windows
P.S.
I dont have any problems
with Win 10.
Everything is automatically recognized.

The ADB drivers are the same as Le Max 2, really? Im using the cable with other phones (2 differents). And SO is Windows 10 Pro x64, and works with Le Max 2 (3 phones)... Any idea? Thank you very much!

Works on Le 2 pro x625

EMUI 9.1.0.210 for DUK-L09C432 (dload firmware)

DUK-L09 9.1.0.210(C432E3R1P5T8)_Firmware_9.0.0_r3_EMUI9.1.0_05014KJB:
https://mega.nz/#!zxInmY6K!iez4Y2Kmg5smCndC8gMqZrjw42FXYVR6CDMM49HCcHQ
This is a dload firmware which works on every DUK-L09C432 with EMUI9.0.
Simply put the dload folder in the root of your microsd, power off the phone and boot it again with all 3 buttons (vol+/- and pwr) pressed for 5-8s.
Voila, it should start installing the new firmware.
Security patches are recent: 5. July 2019.

OldDroid said:
DUK-L09 9.1.0.210(C432E3R1P5T8)_Firmware_9.0.0_r3_EMUI9.1.0_05014KJB:
https://mega.nz/#!zxInmY6K!iez4Y2Kmg5smCndC8gMqZrjw42FXYVR6CDMM49HCcHQ
This is a dload firmware which works on every DUK-L09C432 with EMUI9.0.
Simply put the dload folder in the root of your microsd, power off the phone and boot it again with all 3 buttons (vol+/- and pwr) pressed for 5-8s.
Voila, it should start installing the new firmware.
Security patches are recent: 5. July 2019.
Click to expand...
Click to collapse
will it work on c675?
Sent from my 8 Pro using XDA Labs

OldDroid said:
DUK-L09 9.1.0.210(C432E3R1P5T8)_Firmware_9.0.0_r3_EMUI9.1.0_05014KJB:
https://mega.nz/#!zxInmY6K!iez4Y2Kmg5smCndC8gMqZrjw42FXYVR6CDMM49HCcHQ
This is a dload firmware which works on every DUK-L09C432 with EMUI9.0.
Simply put the dload folder in the root of your microsd, power off the phone and boot it again with all 3 buttons (vol+/- and pwr) pressed for 5-8s.
Voila, it should start installing the new firmware.
Security patches are recent: 5. July 2019.
Click to expand...
Click to collapse
quite strange.. since i'm on Android 9 i can't enter fastboot mode anymore!(smartphone is fully working.. rooted , unlocked )
i tried trough adb "adb reboot fastboot "
also by button sequence..
honor 8 pro just restart ...
anything i could do?
P.S. just tried... even recovery is not working!! so i can just use ADB commands but can't boot in recovery or fastboot

simika said:
quite strange.. since i'm on Android 9 i can't enter fastboot mode anymore!(smartphone is fully working.. rooted , unlocked )
i tried trough adb "adb reboot fastboot "
also by button sequence..
honor 8 pro just restart ...
anything i could do?
P.S. just tried... even recovery is not working!! so i can just use ADB commands but can't boot in recovery or fastboot
Click to expand...
Click to collapse
connect the phone to pc, keep vol- pressed directly after pressing restart on the phone, it should enter fastboot now.
"adb reboot recovery" should work though.
Regards

thank you, I'm gonna try tonight ...
I'm afraid that recovery somehow "disappeared" lol.. when I update from oreo to pie and I changed it to twrp to install magisk! anyway tonight I try, if I get in fast boot I can install recovery (this time pie stick recovery, so I can update to 9.1..cuase if I try "dload" now it just reboot..)
OldDroid said:
connect the phone to pc, keep vol- pressed directly after pressing restart on the phone, it should enter fastboot now.
"adb reboot recovery" should work though.
Regards
Click to expand...
Click to collapse
Sent from my DUK-L09 using Tapatalk

OldDroid said:
connect the phone to pc, keep vol- pressed directly after pressing restart on the phone, it should enter fastboot now.
"adb reboot recovery" should work though. (PLEASE READ AT BOTTOM.. " my solution " )
Regards
Click to expand...
Click to collapse
YES ! like that it worked !!! thank you
[EDIT]
so what i want to do is:
fastboot boot recovery.img BUT is not rebooting in recovery( and not loading it )
but it gives me this error: downloading "boot.img" so it's ignoring my command of booting with recovery.img
i've got stock recovery from UPDATE.app file of my actual rom ( 9.0.1.175 )
i didn't want to "install" the recovery cause i'm not sure it's the right file ... : (i've choosen recovery_ramdis.img)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
is that the right one? in that case i can just install it .. cvause at the moment i can't reboot in any recovery !
[EDIT SOLUTION]
so since anyone could have my doubts ... here it is my " solution !
at the end i did install stock recovery ( which was RECOVERY_RAMDIS.img got from update.app and extracted by huawei update extractor)
fastboot flash recovery_ramdisk recovery_ramdis.img
than i use
fastboot reboot
and since i had the installation package already in my smartphone it went directly into UPDATING status ( through emui update program )
took less than 5 minutes to update to this latest EMUI 9.1.0.210
and 2/ 3 minutes for honor 8 pro to reboot.. and i had to change my underwear LOL !
at the moment i've lost root ... but probably i can get it back in the same way as i did with previous PIE !

LAST UPDATE ( check my other thread ) .. i could install EMUI 9.1.0.210 and ROOT It !
all working thank you @OldDroid for earlier support and doubts cleaning lol !
whoever wants to root EMUI 9.1.0.210 i made a step to step in Emui 9 with Root Honor 8 pro ( tested by myself ...root 100% working ! ) July 2019 thread!

hey
i have a duk l09c432b183 on emui 5.1
does this firmware works for me and how ?

Please I need your answer cause I don't want to brick my phone
So can someone tell me how to e

TWRP for LENOVO Tab M10 FHD - TB-X606F?

Hello, Possessing two tablets of this brand, I was wondering if a custom recovery existed for this one, I can look everywhere on all the forums, Russian, English, etc ... But, I do not find.
If anyone can create one with this SOURCE CODE from the tablet that would be super nice.

I succeded to install twrp on my lenovo x606F.
1) extract recovery.img from a downloaded full firmware
2) download "Mediatek (MTK) Auto TWRP recovery porter by Team Hovatek" v. 1.6 and use it to create a twrp.img from your recovery
3) flash your twrp image by adb:
fastboot flash recovery twrp.img
4) then flash an empty vbmeta.img that you find on team hovatek site by this command (Method 3 - Flashing vbmeta https://forum.hovatek.com/thread-32719.html ):
fastboot --disable-verity flash vbmeta vbmeta.img
5) reboot in recovery. You will receive a message that your partition is encrypted. tap "cancel" and follow the steps indicated on this page (Method 3 - Patching fstab in /vendor partition using TWRP + Text editor https://forum.hovatek.com/thread-30160.html ). You have to backup on your microsd your two fstab.* files in /vendor/etc folder and then modify as indicated. Then, by twrp, overwite them on your original files.
6) reboot in android and flash your original recovery
7) reboot in your stock recovery and make a full data erase. YOU LOST ALL YOUR PERSONAL DATA.
8) reboot in android and reinstall twrp recovery
9) reboot in your full working twrp recovery and check if it is all ok.
When you boot in your twrp, your screen is black, so you have to push power button to light your screen. You can fix it
by checking all three option in magisk manager (keep encryption, keep verity and recovey mode) and reinstall magisk root.
I'm not responsable for any damage on your device. Sorry for my english

zeldoox said:
3) flash your twrp image by adb:
4) then flash an empty vbmeta.img
Click to expand...
Click to collapse
Are you sure? TWRP Recovery Porter says that vbmeta.img must be flashed BEFORE twrp image.

I made several attempts to install twrp. When I succeeded, I installed vbmeta.img after twrp. But, during my previous attempts, I had already installed vbmeta. So, it is possible that the right steps are to install it first.

So, did anyone else succeed with these steps?

Shijune said:
So, did anyone else succeed with these steps?
Click to expand...
Click to collapse
I haven't tried, I'm afraid a bricked my tablets

Shijune said:
So, did anyone else succeed with these steps?
Click to expand...
Click to collapse
Nope. I tried 3-4 times, no way. The only result is that my tab's clock becomes late 11k seconds after each reboot

Guys someone has a working twrp image for android 10?

maks44 said:
Nope. I tried 3-4 times, no way. The only result is that my tab's clock becomes late 11k seconds after each reboot
Click to expand...
Click to collapse
I just rooted Lenovo M8 FHD TB-8705F (Android 9) using the Hovatek Method 3 guide:
flashed empty vbmeta
flashed boot.img created by Magisk

I tried the steps above with the TB-X606F on Android 10 (I used the lenovo recovery tool to rescue os and ended up with android 10) and I am unable to get it working. If I flash the generated twrp image and the vbmeta one (doesn't matter which order) and reboot recovery I get a black screen and no amount of pushing the power button gets the screen to turn on. I have not tried the boot.img file generated by Magisk yet. Anyone have any thoughts on this?

dpn982 said:
I tried the steps above with the TB-X606F on Android 10 (I used the lenovo recovery tool to rescue os and ended up with android 10) and I am unable to get it working. If I flash the generated twrp image and the vbmeta one (doesn't matter which order) and reboot recovery I get a black screen and no amount of pushing the power button gets the screen to turn on. I have not tried the boot.img file generated by Magisk yet. Anyone have any thoughts on this?
Click to expand...
Click to collapse
Can you share the download link for Lenovo recovery tool? Thanks

MisterVik said:
Can you share the download link for Lenovo recovery tool? Thanks
Click to expand...
Click to collapse
https://download.lenovo.com/consumer/mobiles/rescue_and_smart_assistant_v5.3.0.21_signed_setup.exe

Hi all,
I got my TB-X606F today and I'm having a hard time getting fastboot to work. I installed the official MTK driver from google and in my device manager its visible as Android ADB Interface
on my tablet I see the fastboot mode in the lower left corner.
fastboot devices shows nothing on cmd.
Any ideas?
OS Windows 10

MOD EDIT: See here- https://forum.xda-developers.com/t/...sb-driver-installer-tool-for-windows.3999445/
Смотрите здесь-https://forum.xda-developers.com/t/tool-latest-adb-fastboot-and-usb-driver-installer-tool-for-windows.3999445/

acocalypso said:
Hi all,
I got my TB-X606F today and I'm having a hard time getting fastboot to work. I installed the official MTK driver from google and in my device manager its visible as Android ADB Interface
on my tablet I see the fastboot mode in the lower left corner.
fastboot devices shows nothing on cmd.
Any ideas?
OS Windows 10
Click to expand...
Click to collapse
I have the same problem and can't proceed rooting for this reason.
adb works fine. Device is shown, commands like reboot into fastboot mode works fine. But "fastboot devices" does not show an entry.
I've tried to (re-) install the drivers CDC, VCOM, ... several times. I'v tried the "Latest ADB Fastboot and USB Driver installer tool for Windows". Doesn't work.
In device manager, Android Bootloader Interface is shown with an error.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any ideas?

To fix this update your driver to Samsung's adb interfrance and it will work.

I got my TB-X606F rooted but struggle to install TWRP. I believe I'm on Android 10, the latest? I used [Hovatek] Mediatek Auto TWRP Recovery Porter V1.7a by Team Hovatek because I couldn't find version 1.6. I got the recovery.img directly from TB-X606F_S300007_200923_BMP.zip. I select Android 10 in the Android Version and output the TWRP recovery. Then I flashed and flashed the vbmeta (both the version from my zip file and the version from Hovatek. Then I flashed using multiple instructions. When I boot to recovery, it just gives the orange box screen then eventually fully boots to OS. Anything I'm forgetting?

I upgraded to Android 10. I installed again twrp by "Mediatek Auto TWRP Recovery Porter V1.7a". Android 10 version don't work well. "Pie Kernel 4.9.117" version works perfectly. The steps I follow are similar to my previous post. Insted of "forceencrypt" there is "forcefdeorfbe" in fstab.mt6765 file.

zeldoox said:
I upgraded to Android 10. I installed again twrp by "Mediatek Auto TWRP Recovery Porter V1.7a". Android 10 version don't work well. "Pie Kernel 4.9.117" version works perfectly. The steps I follow are similar to my previous post. Insted of "forceencrypt" there is "forcefdeorfbe" in fstab.mt6765 file.
Click to expand...
Click to collapse
How did you get twrp installed plz help

zeldoox said:
I upgraded to Android 10. I installed again twrp by "Mediatek Auto TWRP Recovery Porter V1.7a". Android 10 version don't work well. "Pie Kernel 4.9.117" version works perfectly. The steps I follow are similar to my previous post. Insted of "forceencrypt" there is "forcefdeorfbe" in fstab.mt6765 file.
Click to expand...
Click to collapse
Can you plz make a video of your steps?

Xz2p on gsi 11-12 android

Hello everyone! The camera works on courvus 12L. and cr droid 12L but the battery is big on it. on the courvus 12L the battery is normal.
install twrp and boot into the stock firmware and then boot into twrp again. install the firmware from under twrp as a system image.
enCorvus_vS1.0-Revolt-treble_arm64_ab_vndklite-Gapps-Alpha-0000.img.rar
drive.google.com
this collected all the necessary patches for magisk
patchi.rar
drive.google.com
after installing the firmware, you can flash this recovery.this is recovery-extract the folder from the archive and flash it via fastboot by clicking on the bat file-"1lineage 18.1 recowery.cmd"
lineage 18.1 recowery.rar
drive.google.com
and to run the firmware, be sure to flash it from under recovery
Permissiver_v5.zip
drive.google.com
Sony gallery,fotoredactor sony

Kasper666666 said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse

Hello kasper666666, that`s what I am looking for! It sounds like a fairy tail!
But.....
my knowledge about AOSP and Magisk is poor and even my trial to install magisk for my H8166 was not successfull.
I started from stock rom H8166_Customized DACHBLX_52.1.A.3.49-R6C and Magisk-v24.3 (or alternatively Magisk-v21.4).
Then I flashed system-squeak-arm64-ab-vndklite-gapps.img.
Error: "non supported Magisk-version"
Can you give any advice?
Thanks for your efforts!

I made a mistake. the camera works on firmware courvus 12 v 1.0.magisk does not work because you need to remove system / bin / phh su, and in build.prop in ro.build.fingerprint = you need to insert your own values, the camera also works on cr droid 12 but on it Big battery zhor with gapps.. https://sourceforge.net/projects/tipzbuilds/files/GSIs/CorvusROM/Alpha/20220315/ and be sure to flash it for the sensors to work https://drive.google.com/file/d/1-4cIIg8BNz1o1SlHEqamFKIprYcx9oOX/view?usp=drivesdk

der.lange said:
Can you give any advice?
Thanks for your efforts!
Click to expand...
Click to collapse
if you can’t do this, I will help you, only I will need your build.prop from vendor

Thank you for your quick response and offer!
My last trial was insatalling "magfisk-phh.apk"; but stuck with Sony-logo.

it was not necessary .... I have a ready-made file, now I will upload it to disk and send a link to the finished firmware
put the usual magisk 24.3. install twrp and boot into the stock firmware and then boot into twrp again. install the firmware from under twrp as a system image
then you can put recovery lineage and it will work
lineage-18.1-20220113-recovery-aurora.img
drive.google.com

put all the files in the topic header

sorry, but I can´t see any attachment....
bytheway: will your solution enable the use of the stock xperia camera? As far as I know Bionic does not allow the use of their cameradrivers for the further development.

all attachments open. camera tama 0.3.0 from denny trank works it is in patchi.rar

it´s a hard piece of work for me and an end not to be seen...
1. flash stock with newflasher: ok
2. flash magisk_patched boot.img: ok
3. install twrp
3.1 fastboot boot twrp-kang.img; adb push twrp-kang.img /; install recovery ramdisk; reboot into recovery (with decryption); reboot system doesn´t work, boots into recovery instead!! Flashing system-squeak.img immediately stops with error.
3.2 fastboot boot twrp-aurora.img; boots but no input possible, dead screen
So what I`m doing wrong? Is there another better twrp?

download the archive. extract the twrp-akari.img file, copy it to the memory card. you must have the official firmware, connect the phone to the computer in fastboot and in the folder that you downloaded, click first on 1vbmeta.cmd then on 2twrp.cmd and wait until the phone reboots into twrp. in twrp select advanced then install recowery ramdisk and select the file on the memory card twrp-akari.img and wait for the firmware to finish. then reboot into the system. you can go to twrp and flash the firmware from twrp in system image. flash recovery lineage 18 on fastboot...magisk flash from under recovery lineage 18
xz2p dual TWRP 3.4.0.rar
drive.google.com

sorry, where can I find vbmeta.cmd and twrp.cmd?

xz2p dual TWRP 3.4.0.rar
drive.google.com
sorry

still no end to be seen!
1. install stockrom (newflasher)
2. boot and install ramdisk recovery (twrp-akari.img)
3. flash system.img via recovery or fastboot flash system_a system.img
4. reboot system: SONY-Logo stuck
what´s wrong with me?

2. boot and install ramdisk recovery (twrp-akari.img)!system reboot required!!3. flash system.img via recovery!! no fastboot!!!!4.flash Permissiver_v5.zip..5.reboot system

That´s exactly what I have done. Permissive-zip: too large; aborted....
I think, there´s not enough room for both twrp and permissive in the ramdisk and I dont know howto increase size. If I change the sequence of the installation twrp-img is too large.
"new image larger than boot partition. Aborting"

did you flash it from twrp.? flash recovery lineage 18 and flash permissiver from it

"It′s been a hard day's night
And I′ve been working like a dog" (Beatles)
Finally successfull!
I highly appreciate your work! Thank You!!
My steps installing android 12
1. install stockrom H8166_Customized DACHBLX_52.1.A.3.49-R6C (newflasher)
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
2. boot and install ramdisk recovery (twrp-akari.img)
3. reboot recovery ; reboot system ; reboot recovery again
4. push system.img /sdcard and install
5. replace ramdisk recovery with lineage-18.1-20220113-recovery-aurora.img
6. flash Permissiver_v5.zip from it
7. flash Magisk-v24.3.zip
8. reboot system
9. install camera-0.3.0-tama.zip from patchi.rar via magisk
the original SONY Xperia camera is working!!