http://en.miui.com/download-360.html#582
Yes it does. I bought a Chinese version, waited for 15 days to unlock bootloader, then installed EU rom. You can choose to install official global but EU Global is an slightly improved version of the Global. Either one works fine.
I had no problem flashing the ROM. Just make sure you follow all the steps as explained.
tdot.loco said:
Yes it does. I bought a Chinese version, waited for 15 days to unlock bootloader, then installed EU rom. You can choose to install official global but EU Global is an slightly improved version of the Global. Either one works fine.
I had no problem flashing the ROM. Just make sure you follow all the steps as explained.
Click to expand...
Click to collapse
Xiaomi EU is based in MIUI chinese version and comes with ARB disabled. It's not recommended to flash a global ROM in the chinese version because it could brick the device.
Related
Hello.
Hope you can help because I'm kinda confused atm
My device is redmi note 7 lavender, came stock with EEA (european global) rom.
I recently unlocked the bootloader, installed twrp, tried a few roms (xiaomi.eu, crdroid, phh-treble gsi, etc). Currently using crdroid without issues.
Previous to all this I was using stock EEA 10.3.2.0 firmware and then sideloaded ota for 10.3.3.0.
According to this post this phone has ARB
What I'm wondering is if I were to go back to stock firmware, would I brick my device? Because the only available fastboot version for EEA is 10.3.2.0 which is older I guess, but I'm not sure exactly how ARB works and it that would trigger it.
Thanks in advance
I recommend that you do not return to the previous version, sometimes the ota bring changes in the bootloader, and you can leave it hardbrick as it happened with several Motorola, even with devices that have a Qualcom processor. Expect that someone else has done it or that the software is released to an equal version.
start to investigate the changes that were added
I leave this link you fence to interest move from the EEA to the global version
https://forum.xda-developers.com/redmi-note-7/how-to/stable-rom-eea-to-global-stable-t3937896
ianxblog said:
Hello.
Hope you can help because I'm kinda confused atm
My device is redmi note 7 lavender, came stock with EEA (european global) rom.
I recently unlocked the bootloader, installed twrp, tried a few roms (xiaomi.eu, crdroid, phh-treble gsi, etc). Currently using crdroid without issues.
Previous to all this I was using stock EEA 10.3.2.0 firmware and then sideloaded ota for 10.3.3.0.
According to this post this phone has ARB
What I'm wondering is if I were to go back to stock firmware, would I brick my device? Because the only available fastboot version for EEA is 10.3.2.0 which is older I guess, but I'm not sure exactly how ARB works and it that would trigger it.
Thanks in advance
Click to expand...
Click to collapse
If you're asking specifically about turning back from 10.3.3 to 10.3.2, then there is no problem (I went from 10.3.3 to 10.3.2 to 10.3.3 again and everything is ok).
thunderteaser said:
If you're asking specifically about turning back from 10.3.3 to 10.3.2, then there is no problem (I went from 10.3.3 to 10.3.2 to 10.3.3 again and everything is ok).
Click to expand...
Click to collapse
My RN7 is global, came with 10.2.3.0 as stock, I updated via OTA to 10.3.5.0, and I was wondering if I try rolling back to 10.2.7.0 (As I didn't find any rom of 10.2.3.0 for global PFGMIXM) it will trigger the ARB? thanks in advance (both have lvl 4 in adb query)
Don't. Just bricked my phone.
fox_xda2 said:
Don't. Just bricked my phone.
Click to expand...
Click to collapse
Sorry to bother but, did you bricked going from which-to-rom, using TWRP or the mi-flashtool?
BlackGarnett said:
Sorry to bother but, did you bricked going from which-to-rom, using TWRP or the mi-flashtool?
Click to expand...
Click to collapse
Rolling back firmware only through twrp, trying to get previous drivers for international version which bug less on proximity sensor.
As the phone is unlocked I might have found a way to restore from brick without physically opening the phone. Will keep you updated.
Edit/Update: yipeee!!
Need to completely flash the phone based on the procedure detailed here. And reflash whatever custom ROM afterwards as you get back to stock.
Just rolled back from Global 10.3.5.0 to 10.2.7.0 with MI Flash Tool (fastboot rom type). 0 problems, seems you can rollback from your MIUI 10 ROMS of the same version(EEA with EEA, Global with Global, etc, and of course that these roms have same ARB 4), at least worked for me, posting this future records.
Actually firmware tool (as opposed to twrp) is the way I reset ARB.
Hello,
I just got a Redmi Note 7 Chinese variant but I live in India and the Chinese MIUI isn't that great. I want to change it to the global ROM. I have the fastboot ROM downloaded and even the recovery ROM. I'm hoping that someone has already addressed the issue but I'm posting this because I'm not able to find any. My phone is currently running MIUI China 10.2.13 and it has received the 10.3.4 update. I haven't updated it since it might increment the arb index. Can anyone give me a confirmed, safe and working method to change my software from China to Global? I understand the risks of bootloader unlocking and all.
I'm planning on buying Oneplus 8 Pro from China, then convert it into Global Rom. Does anyone know if flashing global rom will allow the device to receieve auto updates on the OS? Also will I be able to relock the bootloader after flashing the global rom?
Has anyone tried this? Thank you!
Yes you will receive updates. I've got the Chinese version and the seller flashed with official global rom.
J V A said:
I'm planning on buying Oneplus 8 Pro from China, then convert it into Global Rom. Does anyone know if flashing global rom will allow the device to receieve auto updates on the OS? Also will I be able to relock the bootloader after flashing the global rom?
Has anyone tried this? Thank you!
Click to expand...
Click to collapse
Yes you will I have EU version flashed with global rom, you can also use oxygen updater (from play store) to usually get updates early
Hi. As title says could someone share this tool for the CN HydrogenOS OP8P? No results show up online. There's a similar thread for the Oneplus 7T Pro Mclaren Edition.
Just in case, for safekeeping.
Thanks!
Bump.. does anyone know if the tool for H2OS exists?
just used it on my in2020 fine
don't think it matters just pick international and done
nvm different OS version
TheUndertaker21 said:
just used it on my in2020 fine
don't think it matters just pick international and done
nvm different OS version
Click to expand...
Click to collapse
Could you elaborate a bit:
What OOS did you have on your device prior to using international MSM?
Was it EU OOS, US OOS? They are actually the same software wise i think but it's not the same region.
Does your fingerprint still work after using the tool?
android2819 said:
Could you elaborate a bit:
What OOS did you have on your device prior to using international MSM?
Was it EU OOS, US OOS? They are actually the same software wise i think but it's not the same region.
Does your fingerprint still work after using the tool?
Click to expand...
Click to collapse
i had the latest version of OOS Installed and yeah it did and now im on DP4
TheUndertaker21 said:
i had the latest version of OOS Installed and yeah it did and now im on DP4
Click to expand...
Click to collapse
Ok so basically:
1.You bought your phone from China, it's the IN2020 chinese OP8P.
2.When you received it, you already had OOS on it, the seller made sure to flash it before shipping.
3. Can you tell me what was the latest OOS version you had prior to switching to DP4?
International/North American OOS is 10.5.13.IN11AA
European OOS is 10.5.12.IN11BA
I live in EU and once my device arrives i wanna make sure if the seller put EU OOS on it, in the case i brick the phone i can safely use the MSM tool which is tied to my OOS region.
Basically my confusion is: do i have to use the MSM tool of the device region or the MSM tool of the software region? That's it.
From what i understand, you had International / NA OOS on a Chinese phone and used international MSM and all works fine. Which means it's based on software region and not the device itself.
Thanks a bunch
Any Developer Have OnePlus 8 Pro CN IN2020 MSM Unbrick Tool For HydrogenOS Give Us For More Use
Please let's do get linkdownload
is that true statement?
after converting global rom to any other region we can relock bootloader?
it is only not allowed to install a different region MIUI ROM on China devices, global devices do not have this limitation.
yesterday I installed the European version on my citrus that had the Global ROM. I didn't get to re-lock bootloader, but everything worked perfectly
usmangulzar020 said:
is that true statement?
after converting global rom to any other region we can relock bootloader?
it is only not allowed to install a different region MIUI ROM on China devices, global devices do not have this limitation.
Click to expand...
Click to collapse
Source from other forum (website) : China default firmware to other region or any global rom can't be re-lock and vice versa. But as long as not china rom, you can re-lock as you like. I tried with my EU rom by default and unlocked the boatloader then to Indonesia rom and re-lock it, done and worry no more.
Eam31961 said:
Source from other forum (website) : China default firmware to other region or any global rom can't be re-lock and vice versa. But as long as not china rom, you can re-lock as you like. I tried with my EU rom by default and unlocked the boatloader then to Indonesia rom and re-lock it, done and worry no more.
Click to expand...
Click to collapse
You mean EU or xiaomi.eu ROM ?
If I understood well, CN version phones can't relock into any other region MIUI stock rom nor xiaomi.eu (even if it's CN-based).
But most OEM allow relocking into different firmware region(e.g. OnePlus allows changing EU, GLO & IN versions and relocking afterwards).
Lineage-fan said:
You mean EU or xiaomi.eu ROM ?
If I understood well, CN version phones can't relock into any other region MIUI stock rom nor xiaomi.eu (even if it's CN-based).
But most OEM allow relocking into different firmware region(e.g. OnePlus allows changing EU, GLO & IN versions and relocking afterwards).
Click to expand...
Click to collapse
Yes, the original firmware and not the mode one.