Related
Hello,
I have a big problem. I don't know what to do.
I wanted to make a clean install of OxygenOS 4.5.8 and so i downloaded it, did it on SD card together with Magisk and no_verity_op5.zip (because i read that this decrypt the data).
So i cleand data and installed no_verity_op5.zip via TWRP, but when i wanted to reboot it takes way to long (i waited 30minutes but it stays on boot circle)
After that i booted into TWRP and decided to made a factory reset and to install OxygonOS 4.5.8 in a clean version. But it was not possible anymore!
When i want to install the .zip it says Patching system image unconditionally... and it loads. after the blue is full it says:
writing static_nvbk image...
patching firmware images...
script succeeded: result was [1.000000]
And when i want to boot into system it says no OS installed.
I tried also to flash this rom or even any other custom rom through ADB Sideload but it does not work. Same like above..
What can i do? I do not know what to do
I hope my phone is not bricked.
Thank you for any suggestion.
Go to oneplus 5 official download page, download stock recovery and latest stock firmware and follow instructions on the download page.... But first with TWRP take a backup of all your data because restoring stock firmware will ERASE everything... Don't panic it will works
First off, don't panic! you're not bricked as long as you can reach your bootloader and recovery.
This happened to me as well and luckily the fix is easy!
You probably tried to flash the OxygenOS build from the Oneplus downloads right?
Somehow these won't flash properly through TWRP and you must therefore also flash the Oxygen recovery image listed in the downloads.
Here are some steps that'll fix your problem.
1 - Backup all of your private data from internal storage because flashing OxygenOS will WIPE/ENCRYPT all data on your device.
2 - Go to the Oneplus download center and download both the latest OxygenOS and it's appropriate recovery:
http://downloads.oneplus.net/oneplus-5/oneplus_5_oxygenos_4.5.8
3 - Boot into your bootloader and flash the stock recovery you just downloaded. (fastboot flash recovery <recovery>.img)
4 - Boot into the Oxygen recovery and flash OxygenOS.
This should get you up and running again.
Once you get tired of OxygenOS simply reboot back into your bootloader and flash TWRP and any rom of your liking.
In the future if you want to flash OxygenOS from TWRP you have to grab a build from XDA I guess. I'm not entirely sure why flashing from within TWRP won't work with stock OOS but I believe it expects to be flashed from withing the stock recovery.
I'm pretty confident this will solve your problems.
Please backup your data first though, don't want anything to get messed up in there!
Good luck!
Ok thank you.
i will try it.
So you are right, i tried to install OxygenOS with TWRP.
So is it not possible to have official OxygenOS with TWRP, Magisk and Root?
So i cannot backup OxygenOS with TWRP?
manuelbvb said:
Ok thank you.
i will try it.
So you are right, i tried to install OxygenOS with TWRP.
So is it not possible to have official OxygenOS with TWRP, Magisk and Root?
So i cannot backup OxygenOS with TWRP?
Click to expand...
Click to collapse
It is possible to have both OxygenOS and TWRP for sure!
Only a clean flash from a non-encrypted state in TWRP seems to break stuff. You can use a modified OOS build from the forums.
TWRP can indeed backup your OOS install so that shouldn't be a problem.
The only exception seems to be flashing a clean install of OxygenOS (from Oneplus Download center) through TWRP.
Other than that everything works as expected.
Ok thank you.
So i will follow you instructions and i hope it will work.
And i think so.
And after it i will install TWRP again (because i need the backup tool), i will install magisk. will this work?
So i can use everything as in a custom rom, but cannot make a clean install? So official Oneplus OTA will work with TWRP or not?
Thank you soooo much!
Also, Magisk/root works just fine on OxygenOS.
Once you flashed OOS from the stock recovery and have everything set up simply boot into your bootloader and flash TWRP.
From there you flash Magisk and everything should be fine.
OTA's from Oneplus also install fine through TWRP as long as you go into Magisk and uninstall 'root' first. When OxygenOS tells you there's an update simply remove Magisk as I said above and it'll update fine.
Ok thank you!
It worked!!!!! I am very happy!
So i will now install TWRP, and then magisk (newest version).
I have a question, because the last time i installed magisk it did not fully work.
If i install it i have root or? But how can i get saftynet in magisk?
manuelbvb said:
Ok thank you!
It worked!!!!! I am very happy!
So i will now install TWRP, and then magisk (newest version).
I have a question, because the last time i installed magisk it did not fully work.
If i install it i have root or? But how can i get saftynet in magisk?
Click to expand...
Click to collapse
First off! YAY!! glad it worked out!
Be sure to use the TWRP build from the twrp.me website. The one listed on these forums are 'unofficial'. Not saying those are bad, but the official one has a pretty impressive track-record.
After flashing Magisk you are root-enabled so yeah, congrats you are now root! In order to pass safetynet you must enable 'magisk hide' in the magisk manager (the app that should now be installed on your phone).
If you do not have an app called 'magisk manager' then you can download this app from the magisk forums. It should however install itself while flashing the Magisk zip. So assuming you have it installed find the 'magisk hide' service and enable it.
From my experience you sometimes need to reboot in order for it to pass safetynet check.
Glad it all worked out for you!
Everything worked!
Now i have OxygenOS 4.5.8 (with OTAs in future), magisk + root + saftynet and i can install something throug TWRP and backup.
SO PERFEKT.
You are a hero
manuelbvb said:
Everything worked!
Now i have OxygenOS 4.5.8 (with OTAs in future), magisk + root + saftynet and i can install something throug TWRP and backup.
SO PERFEKT.
You are a hero
Click to expand...
Click to collapse
That's great to hear!
Enjoy and take care!
no os
sideloaded zip for rom in twrp, says successful but then no os installed and I can't find the zip anywhere in twrp. help :]
xda___ said:
sideloaded zip for rom in twrp, says successful but then no os installed and I can't find the zip anywhere in twrp. help :]
Click to expand...
Click to collapse
Can't you just connect your phone to your PC and use MTP for the file transfer? Make sure to have MTP disabled under TWRP-> Mount -> Enable MTP
Zocker1304 said:
Can't you just connect your phone to your PC and use MTP for the file transfer? Make sure to have MTP disabled under TWRP-> Mount -> Enable MTP
Click to expand...
Click to collapse
I tried, windows recognizes my phone, but when I try to transfer files it it says device is not available or has been disconnected (something like that...)
xda___ said:
I tried, windows recognizes my phone, but when I try to transfer files it it says device is not available or has been disconnected (something like that...)
Click to expand...
Click to collapse
Well just flash a different twrp via fastboot flash recovery *path to file*
hi ppl
it was rooted before. used twrp and some custom roms. but later it unrooted somehow.
I tried flashing super su, magisk and ioroot. supersu and magisk turn with an error msg
io root made it stuck on bootloader animation so I flashed a backup.
how to root it?
thx in advance
1) flash latest twrp http://www.gregtwallace.com/lgg2-projects/twrp/ - then reboot into twrp
2) made absolutely all wipes incl internal and data (delete all stuff) - then reboot into twrp
3) connect to usb - and simply copy rom, gapps, and root solution what you want to flash
latest stable magisk for twrp - https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
latest supersu for twrp - Recovery Flashable.zip http://www.supersu.com/download
3) flash the rom what you wanted and flash gapps
3) flash magisk or supersu
(if android 7.1.2 or higher of course - I recommend magisk, because of working nfc pay features, a lot of great systemless addons etc...)
if you prefer old lollipop rom (for example CloudyG2_3.3 ) - it supersu only.
This is the correct sequence - which will eliminate problems with the firmware. If you deleted and installed the root earlier (as you say)
I tried flashing super su, magisk and ioroot. supersu and magisk turn with an error msg
Click to expand...
Click to collapse
jeezes)) you already killed the rom.... and then restore the all this restores backup, this is a "dirty flash" with a bunch of "remnants". I recommend to do clean flash it in the specified sequence and everything will be ok.
You will spend a couple of 1-2 hours only on installing (and setting) completely all applications. It is not so difficult. But it will save you from a bunch of nonsense questions...
If you actually don't have TWRP recovery installed or old Kit kat Rom - this is absolutely another question and the instructions will not work for you. Also, Kit Kat and Lollipop based ROMs does not support Magisk - because of this error.
zemix said:
1) flash latest twrp http://www.gregtwallace.com/lgg2-projects/twrp/ - then reboot into twrp
2) made absolutely all wipes incl internal and data (delete all stuff) - then reboot into twrp
3) connect to usb - and simply copy rom, gapps, and root solution what you want to flash
latest stable magisk for twrp - https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
latest supersu for twrp - Recovery Flashable.zip http://www.supersu.com/download
3) flash the rom what you wanted and flash gapps
3) flash magisk or supersu
(if android 7.1.2 or higher of course - I recommend magisk, because of working nfc pay features, a lot of great systemless addons etc...)
if you prefer old lollipop rom (for example CloudyG2_3.3 ) - it supersu only.
This is the correct sequence - which will eliminate problems with the firmware. If you deleted and installed the root earlier (as you say)
jeezes)) you already killed the rom.... and then restore the all this restores backup, this is a "dirty flash" with a bunch of "remnants". I recommend to do clean flash it in the specified sequence and everything will be ok.
You will spend a couple of 1-2 hours only on installing (and setting) completely all applications. It is not so difficult. But it will save you from a bunch of nonsense questions...
If you actually don't have TWRP recovery installed or old Kit kat Rom - this is absolutely another question and the instructions will not work for you. Also, Kit Kat and Lollipop based ROMs does not support Magisk - because of this error.
Click to expand...
Click to collapse
thx bro. I did all the steps but it seems same problem going on. sure I want the latest of everything. better updated all. so, using the latest twrp, I wipe all data then format all data then again wipe everything
this aosp rom and gapps worked perfectly. then flashed teh magisk but again its unrooted.
it installs magisk perfectly but root checker says its not rooted. anyway thx for help
btw, aosp rom android 9 has a bluetooth bug. giving a bluetooth stopped message every 10 seconds.
so any advice anout that problem?
you must grant root permission when popup (magisk) appears.
its not automatically
popup similar as in supersu
root works excellent on d802 with Magisk
for example Es File Explorer or any Root Checker
---------- Post added at 17:12 ---------- Previous post was at 17:10 ----------
I use 7.1.2 android based AospExtended v 4.6
because latest pie rom has bugs and not stable
Screenshot https://i.imgur.com/6IcIvJx.jpg
slabongrade said:
thx bro. I did all the steps but it seems same problem going on. sure I want the latest of everything. better updated all. so, using the latest twrp, I wipe all data then format all data then again wipe everything
this aosp rom and gapps worked perfectly. then flashed teh magisk but again its unrooted.
it installs magisk perfectly but root checker says its not rooted. anyway thx for help
btw, aosp rom android 9 has a bluetooth bug. giving a bluetooth stopped message every 10 seconds.
Click to expand...
Click to collapse
flash magisk.zip and install magisk.apk to root android 9
zemix said:
you must grant root permission when popup (magisk) appears.
its not automatically
popup similar as in supersu
root works excellent on d802 with Magisk
for example Es File Explorer or any Root Checker
---------- Post added at 17:12 ---------- Previous post was at 17:10 ----------
I use 7.1.2 android based AospExtended v 4.6
because latest pie rom has bugs and not stable
Click to expand...
Click to collapse
zemix said:
Screenshot https://i.imgur.com/6IcIvJx.jpg
Click to expand...
Click to collapse
elffoh said:
flash magisk.zip and install magisk.apk to root android 9
Click to expand...
Click to collapse
zemix said:
you must grant root permission when popup (magisk) appears.
its not automatically
popup similar as in supersu
root works excellent on d802 with Magisk
for example Es File Explorer or any Root Checker
---------- Post added at 17:12 ---------- Previous post was at 17:10 ----------
I use 7.1.2 android based AospExtended v 4.6
because latest pie rom has bugs and not stable
Click to expand...
Click to collapse
zemix said:
Screenshot https://i.imgur.com/6IcIvJx.jpg
Click to expand...
Click to collapse
elffoh said:
flash magisk.zip and install magisk.apk to root android 9
Click to expand...
Click to collapse
I used supersu and it turned out to be "certification verify" problem. OS not running because of this problem but says rooted. so I can still reach twrp but it really become annoying. this is my old phone and will use as 2nd in my Thailand trip soon.
what to do now? can I use unrooted with a sim card? with no problem?
Please, don't use this nonsense "overquoting" when you answer to someone. Have some respect to the forum rules, and users.
if you want stable rom for LGG2-D802 flash
1) aosp extended based on 7.1.2 or 8.1 versions of Android.
2) flash gapps nano
3) flash magisk zip
4) after rom starts - do the first quick settings - then open Magisk (and if needed update the Magisk manager)
Do not flash both (supersu and magisk) risk to brick the phone.
"device not certified" messege will be always if you use Supersu. It's obviously. Using supersu you unable to use apps like Google pay or any banking apps, because of system root.
Magisk is systemless solution, that's why Google do not recognize Magisk's root. And Play Store on about screen always show "Your device is certified". Also you can Hide root from some apps using Hide option in Magisk manager (it's very useful for local banking apps).
I have a suspicion that you used an older version of Android KitKat (official). And now you try to flash a new Rom (above the Android 7.1.2+). You can't do this. Because you must have Lollipop bootloader. You must be an Android Lillipop first. And then (get Root, then TWRP). And after all that - you will be able to flash some of Rom we are talking about.
zemix said:
Please, don't use this nonsense "overquoting" when you answer to someone. Have some respect to the forum rules, and users.
if you want stable rom for LGG2-D802 flash
1) aosp extended based on 7.1.2 or 8.1 versions of Android.
2) flash gapps nano
3) flash magisk zip
4) after rom starts - do the first quick settings - then open Magisk (and if needed update the Magisk manager)
Do not flash both (supersu and magisk) risk to brick the phone.
"device not certified" messege will be always if you use Supersu. It's obviously. Using supersu you unable to use apps like Google pay or any banking apps, because of system root.
Magisk is systemless solution, that's why Google do not recognize Magisk's root. And Play Store on about screen always show "Your device is certified". Also you can Hide root from some apps using Hide option in Magisk manager (it's very useful for local banking apps).
I have a suspicion that you used an older version of Android KitKat (official). And now you try to flash a new Rom (above the Android 7.1.2+). You can't do this. Because you must have Lollipop bootloader. You must be an Android Lillipop first. And then (get Root, then TWRP). And after all that - you will be able to flash some of Rom we are talking about.
Click to expand...
Click to collapse
Oh Finally!
dowloaded aosp 8.1 and all done. I was trying to use android 9 to be updated. But, pie becoming to be a "creampie" to me so I listened your word. and did it
just opened recovery mode and deleted all the zips. and copied new ones and flashed in order
1) aosp extended 8.1
2) open gapps nano for 8
3) magisk beta (yes this time I tried beta ver and it worked!)
after settings etc. checked with root checker and it was ok. so magisk.apk is not necessary now
thx again bro
I have read many threads and lots of videos and cannot seem to get the Magisk installed.
I have flashed back to stock many times with (N900VVRUEOF1_N900VVZWEOF1_N900VVRUEOF1_HOME.tar.md5) in order to try multiple methods.
Rooted with Arabictoolapp - used rootchecker to verify/application also says true for root
followed: https://forum.xda-developers.com/ve...guide-ob6-of1-root-bootloader-unlock-t3439010
installed SU from playstore to unlock bootloader using the adp method - shows developer mode to verify - using eMMc to verify CID starts with 15
followed: https://forum.xda-developers.com/ve...l/official-note-3-verizon-bootloader-t3359370
installed twrp using official twrp app & also tried ODIN in another trial (picked verizon americas and got twrp-3.2.3-0-hlte.img.tar and twrp-3.2.3-0-hlte.img )
turned phone off and boot into recovery to verify; at this time i created a recovery
using MagiskManager i downloaded the zip (Magisk-v18.1.ip) and flashed using twrp - no errors but when i restart the phone it says Magisk not installed
next attempt was to extract the boot.img from the stock OF1 and then flash the Magisk - no errors but when i restarted the phone it says the same thing - Magisk not installed
another attempt was to patch the boot.img and got a patch_boot.img then using TWRP i flashed the patch_boot.img - restarted and magisk not installed
after further digging, i tried another method which was to unroot using SU, reboot, go into recovery to then install Magisk - magisk not installed
*note each attempt to install Magisk unrooted my phone
*was able to use Magisk-uninstaller-20190204.zip to uninstall Magisk manager from recovery - icon went away
anyways i am completely stuck now. any suggestions or comments on my approach?
jordanfan23 said:
installed SU from playstore to unlock bootloader using the adp method - shows developer mode to verify - using eMMc to verify CID starts with 15
followed:
Click to expand...
Click to collapse
Did you uninstall SU before trying to install magisk. The two together may cause conflict.
cssr said:
Did you uninstall SU before trying to install magisk. The two together may cause conflict.
Click to expand...
Click to collapse
Yes my last attempt i tried.
please help! there has got to be something i am doing wrong or missing. i can flash the uninstall zip and it does uninstall the magisk manager
@cssr any other input or suggestions?
jordanfan23 said:
@cssr any other input or suggestions?
Click to expand...
Click to collapse
Try twrp 2.8.7 hltevzw. You are using the stock ROM which is android 5. Twrp 3.1 and higher is for android 7 and up. I missed that the first time I read your post.
cssr said:
Try twrp 2.8.7 hltevzw. You are using the stock ROM which is android 5. Twrp 3.1 and higher is for android 7 and up. I missed that the first time I read your post.
Click to expand...
Click to collapse
no go =(
@cssr should i try another version of magisk?
jordanfan23 said:
@cssr should i try another version of magisk?
Click to expand...
Click to collapse
Yes. Are you installing Magisk .zip in twrp and installing Magisk Manager APK after normal reboot?
cssr said:
Yes. Are you installing Magisk .zip in twrp and installing Magisk Manager APK after normal reboot?
Click to expand...
Click to collapse
what do you mean after normal reboot? so flash magisk in twrp. reboot. reboot again then install magisk manager? do you know what version of magisk i should run and where i can find the dl link?
What he means is you install the Magisk ZIP via TWRP in Recovery mode, reboot the phone, then you install Magisk Manager via the APK.
Go to magiskmanager dot com website which has the ZIP installer plus the APK for the Manager.
I only just recently tried to tackle this challenge. I also installed 0F1 with Odin, then rooted with Arabic. I was messing with Pokemon go and it wasn't happy I was rooted. I downloaded magisk manager, installed it that way. At reboot, angry message from Verizon that I have custom software and phone won't boot. I assume this is because I didn't install custom recovery.
If you figure a way to get this done, I will be grateful. One thing I don't quite follow. Magisk is a root method...so should we really be rooting the phone prior? Seems redundant and going against the whole point of magisk. Right?
I wanted to play around with spoofing GPS with PGO which requires making a GPS spoofer a system app (need root for that). Is that still possible using magisk?
I'll post any updates I have as well.
Here is in details and with all files on one place how to root stock Android Pie for SM-G955F device.
Please if you don't know what are you doing, better avoid this straight forward process because I presume you already knows it.
Also...it will work on ALL Pie firmware versions.
Download on your SDcard all files attached here and...
Rooting process goes as follows.
1. Flash stock firmware G955FXXU4DSBA_G955FOXM4DSBA_DBT and wait for welcome screen on device and reboot in download mode again
2. Flash latest TWRP recovery
3. Enter in TWRP recovery and allow file modifications, then
3a. Format data from recovery...reboot recovery again and repeat procedure from above
4. Install from TWRP no-verity-opt-encrypt-samsung-1.0.zip from link below.
5. Reboot recovery
6. From recovery install Magisk-v18.1(18100).zip
7. Now restart and configure your device as you need.
8. Install latest Magisk app and open app, and within app, install all necessery files
9. Now you are rooted
Install Viper4android
To prepare before, please with Root explorer app rename file audio_effects.conf in audio_effects.conf.BAK, located in folder Vendor/etc
1. Install latest busybox
2. Install ViPER4Android_FX_v2505_A7.x_Nougat_IO_test_fix.apk from here
3. Reboot device and go into TWRP
3a. Install FUSION KERNEL from link below ( one of the fastest kernels I have ever seen)
4. Install Viper drivers as usuall
5. Reboot device
Viper4android is installed.
In Settings check in Sound and vibrations menu if Viper is your default sound module, if not, select it.
.
THANK YOU NOTE GOES TO ALL DEVELOPERS WHO BLESSED US WITH THEIR WORKS !
.
MAGISK
https://www.xda-developers.com/how-to-install-magisk/
FUSION KERNEL with permissive mode
https://www.leorom.cc/index.php/fusion.html?t=1553420049699
TWRP S8+
https://forum.xda-developers.com/galaxy-s8+/development/recovery-twrp-galaxy-s8-exynos-t3594756
VIPER4ANDROID
https://forum.xda-developers.com/showthread.php?t=2191223
I do not take any responsibility for possible errors or damaged devices caused by lack of someones knowledge.
.
Does anyone tryed it?
Will try tomorrow!
Thanks!
Just followed your steps and my phone is rooted now!
keunhuvac said:
Just followed your steps and my phone is rooted now!
Click to expand...
Click to collapse
Excellent !
Btw, i use viper module in magisk manager and it works fine!
keunhuvac said:
Btw, i use viper module in magisk manager and it works fine!
Click to expand...
Click to collapse
Same here, works fine with Magisk Module ?
keunhuvac said:
Btw, i use viper module in magisk manager and it works fine!
Click to expand...
Click to collapse
Thank you for that info. I didn't tryed module rather then install standalone app. Anyway, good to work on both ways.
tin2404 said:
Here is in details and with all files on one place how to root stock Android Pie for SM-G955F device.
Please if you don't know what are you doing, better avoid this straight forward process because I presume you already knows it.
Also...it will work on ALL Pie firmware versions.
Download on your SDcard all files attached here and...
Rooting process goes as follows.
1. Flash stock firmware G955FXXU4DSBA_G955FOXM4DSBA_DBT and wait for welcome screen on device and reboot in download mode again
2. Flash latest TWRP recovery
3. Enter in TWRP recovery and allow file modifications, then
3a. Format data from recovery...reboot recovery again and repeat procedure from above
4. Install from TWRP no-verity-opt-encrypt-samsung-1.0.zip from link below.
5. Reboot recovery
6. From recovery install Magisk-v18.1(18100).zip
7. Now restart and configure your device as you need.
8. Install latest Magisk app and open app, and within app, install all necessery files
9. Now you are rooted
Install Viper4android
To prepare before, please with Root explorer app rename file audio_effects.conf in audio_effects.conf.BAK, located in folder Vendor/etc
1. Install latest busybox
2. Install ViPER4Android_FX_v2505_A7.x_Nougat_IO_test_fix.apk from here
3. Reboot device and go into TWRP
3a. Install RZ KERNEL PIE from here
4. Install Viper drivers as usuall
5. Reboot device
Viper4android is installed.
In Settings check in Sound and vibrations menu if Viper is your default sound module, if not, select it.
.
THANK YOU NOTE GOES TO ALL DEVELOPERS WHO BLESSED US WITH THEIR WORKS !
.
MAGISK
https://www.xda-developers.com/how-to-install-magisk/
RZ KERNEL with permissive mode
https://forum.xda-developers.com/ga...t/kernel-rz-kernel-samsung-galaxy-s8-t3893139
TWRP S8+
https://forum.xda-developers.com/galaxy-s8+/development/recovery-twrp-galaxy-s8-exynos-t3594756
VIPER4ANDROID
https://forum.xda-developers.com/showthread.php?t=2191223
I do not take any responsibility for possible errors or damaged devices caused by lack of someones knowledge.
.
Click to expand...
Click to collapse
what about OEM unlock, I must turn on??
jackherer72 said:
what about OEM unlock, I must turn on??
Click to expand...
Click to collapse
https://forum.xda-developers.com/sitesearch.php?q=oem unlock
Hello, you have solution for root samsung s8 + g9550zhu4dSg2 ?
Hello everyone
How to install magisk on lineageos 18.1?
I've downloaded/installed magisk.apk from official github website, but I cannot find clear steps about how to root the device, any help? thanks!
the device is sm-g900f
Download the magisk .apk to your phone and install it. Rename .apk to .zip and reboot to your recovery by holding volume up and home while powering on.
If using TWRP
Tap Install
Tap Install Zip to toggle the button
Select the magisk .zip file and flash
Reboot
Boatshow said:
Download the magisk .apk to your phone and install it. Rename .apk to .zip and reboot to your recovery by holding volume up and home while powering on.
If using TWRP
Tap Install
Tap Install Zip to toggle the button
Select the magisk .zip file and flash
Reboot
Click to expand...
Click to collapse
Thank you very much!
Boatshow said:
Download the magisk .apk to your phone and install it. Rename .apk to .zip and reboot to your recovery by holding volume up and home while powering on.
If using TWRP
Tap Install
Tap Install Zip to toggle the button
Select the magisk .zip file and flash
Reboot
Click to expand...
Click to collapse
thanks ! my d852 is now rooted!
Boatshow said:
Download the magisk .apk to your phone and install it. Rename .apk to .zip and reboot to your recovery by holding volume up and home while powering on.
If using TWRP
Tap Install
Tap Install Zip to toggle the button
Select the magisk .zip file and flash
Reboot
Click to expand...
Click to collapse
Hi Boatshow,
great - worked for me with Magisk 23.0 perfectly - thank you so much!!! Installing first wasn't necessary so, I just downloaded to SD Card, renamed, installed with TWRP. Than I had to finish installing inside system, now all works well!
Hey guys!
New here and new to Android in general.
Instead of creating another thread and I will if its preferred, I wanted to ask how do I install Magisk without TWRP?
I'm on LineageOS 8.1 and my device is an OnePlus 8T.
The goal is to pass SafetyNet.
Fumetsu_Guritto said:
Hey guys!
New here and new to Android in general.
Instead of creating another thread and I will if its preferred, I wanted to ask how do I install Magisk without TWRP?
I'm on LineageOS 8.1 and my device is an OnePlus 8T.
The goal is to pass SafetyNet.
Click to expand...
Click to collapse
How to Install Magisk on your Android Phone
Magisk is a powerful tool that can help you customize some aspects of your phone or even grant you root access. Here's how you can install it!
www.xda-developers.com
jmh2002 said:
How to Install Magisk on your Android Phone
Magisk is a powerful tool that can help you customize some aspects of your phone or even grant you root access. Here's how you can install it!
www.xda-developers.com
Click to expand...
Click to collapse
edit: possible human error.
Editx2: How crucial is it that I use this command to copy the patched image vs just dragging and dropping my phone to the pc?
Copy the patched image to your PC with ADB:adb pull /sdcard/Download/magisk_patched_[random_strings].img
My OnePlus 8T doesn't have an SD Card and I couldn't find the directory to run the command. Instead I dragged and dropped / copied from phone to PC - then flashed the patched boot.img.
After reboot my phone is stuck in the bootloader for LineageOS
How to install Magisk using Lineage Recovery? I installed LineageOS and my TWRP is gone, I now have Lineage Recovery. LeTv S3 Pro (X720).
I try to install magisk (21.4 22 23) in z3 compact with lineageos 18 and twpr 3.1.1 but nothing result… only apk is ok. It is possible have some help? Thanks! I need to boost power led in torch and video, so i must flash a magisk module.
rgr1 said:
How to install Magisk using Lineage Recovery? I installed LineageOS and my TWRP is gone, I now have Lineage Recovery. LeTv S3 Pro (X720).
Click to expand...
Click to collapse
Hi there, I have the same exact question here!
There seems to be no easy way to install TWRP on Pixel 3 XL...even if I would like to, as it would make full system backups a piece of cake!
ogghi said:
Hi there, I have the same exact question here!
There seems to be no easy way to install TWRP on Pixel 3 XL...even if I would like to, as it would make full system backups a piece of cake!
Click to expand...
Click to collapse
You can install Magisk thru LineageOS Recovery Mode, just use adb sideload magisk.zip(rename magisk.apk into magisk.zip) after you've installed Magisk app on your phone.
snickky said:
You can install Magisk thru LineageOS Recovery Mode, just use adb sideload magisk.zip(rename magisk.apk into magisk.zip) after you've installed Magisk app on your phone.
Click to expand...
Click to collapse
hi ,
i tried this and got error :
E:footer is wrong
E:signature verification failed
error:21
can you help please?
thank you .
jlll69 said:
hi ,
i tried this and got error :
E:footer is wrong
E:signature verification failed
error:21
can you help please?
thank you .
Click to expand...
Click to collapse
It worked for me. I did enable usb debugging as root tho maybe that could be it. I got
E:signiture verification failed
aswell but I just selected yes and it worked on my pixel XL