Hi,
I have a problem with a Moto G4. I tried to root the device and think I f***** up a bit.
After successfully installing TWRP I tried to install SuperSu using adb sideload and afterwards the device wouldn't boot anymore. Only fastboot and the recovery are still working. If I try to boot the device it just turns off. A factory reset didn't help.
I tried installing a LineageOS but nothing changed. It still boots into fastboot.
Can anybody help?
squanch123 said:
Hi,
I have a problem with a Moto G4. I tried to root the device and think I f***** up a bit.
After successfully installing TWRP I tried to install SuperSu using adb sideload and afterwards the device wouldn't boot anymore. Only fastboot and the recovery are still working. If I try to boot the device it just turns off. A factory reset didn't help.
I tried installing a LineageOS but nothing changed. It still boots into fastboot.
Can anybody help?
Click to expand...
Click to collapse
I forgot to say that I at first didn't install supersu systemless.
After I noticed that the device wouldn't boot anymore I tried installing it again systemless.
squanch123 said:
I forgot to say that I at first didn't install supersu systemless.
After I noticed that the device wouldn't boot anymore I tried installing it again systemless.
Click to expand...
Click to collapse
Hmm, did you wipe your system and data in TWRP before flashing LineageOS? You do not require root to flash LineageOS, just an unlocked bootloader and a compatible TWRP recovery (taking care to note if you need the 32 bit or 64 bit TWRP recovery for the respective custom ROM).
Also, with rooting on our G4/Plus, if you are on stock Nougat, you must flash a custom kernel (e.g. ElementalX) before you root. You'll otherwise experience the boot failures you're experiencing. Thus, to root on stock Nougat, unlock bootloader, flash/boot TWRP, backup, then flash ElementalX, then flash SuperSU/magisk.
Without knowing the current state of your device, I would suggest re-flashing your device with the stock firmware. Can you remember what stock firmware you had on your device before rooting initially?
echo92 said:
Hmm, did you wipe your system and data in TWRP before flashing LineageOS? You do not require root to flash LineageOS, just an unlocked bootloader and a compatible TWRP recovery (taking care to note if you need the 32 bit or 64 bit TWRP recovery for the respective custom ROM).
Also, with rooting on our G4/Plus, if you are on stock Nougat, you must flash a custom kernel (e.g. ElementalX) before you root. You'll otherwise experience the boot failures you're experiencing. Thus, to root on stock Nougat, unlock bootloader, flash/boot TWRP, backup, then flash ElementalX, then flash SuperSU/magisk.
Without knowing the current state of your device, I would suggest re-flashing your device with the stock firmware. Can you remember what stock firmware you had on your device before rooting initially?
Click to expand...
Click to collapse
Hi, thanks for your reply
Yes, I wiped system data and cache before flashing lineage. I just tried it again and I am still stuck in fastboot.
Unfortunately I don't remember the stock firmware version. Should I just try to flush the custom kernel and supersu afterwards?
squanch123 said:
Hi, thanks for your reply
Yes, I wiped system data and cache before flashing lineage. I just tried it again and I am still stuck in fastboot.
Unfortunately I don't remember the stock firmware version. Should I just try to flush the custom kernel and supersu afterwards?
Click to expand...
Click to collapse
Hmm, did you know if the flash of LineageOS reported okay within TWRP? Just out of interest, which TWRP and which build of LineageOS are you flashing (e.g. are you using the 32 bit TWRP or 64 bit TWRP, and are you flashing the 32 or 64 bit Lineage OS)?
That's confusing that even pressing 'start' in fastboot reboots your device rather than booting, even with a custom ROM... What happens if you boot to TWRP and try to reboot via TWRP? Is there a system to boot to?
Without the stock system on your device, there's no point to re-flashing the custom kernel/SuperSU, since you should have LineageOS on your device. Do you have a TWRP backup you could restore before you tried to root? If not, then what's your device model number (and if you can remember it, what software channel you're on, e.g. retus, reteu etc). ?
echo92 said:
Hmm, did you know if the flash of LineageOS reported okay within TWRP? Just out of interest, which TWRP and which build of LineageOS are you flashing (e.g. are you using the 32 bit TWRP or 64 bit TWRP, and are you flashing the 32 or 64 bit Lineage OS)?
That's confusing that even pressing 'start' in fastboot reboots your device rather than booting, even with a custom ROM... What happens if you boot to TWRP and try to reboot via TWRP? Is there a system to boot to?
Without the stock system on your device, there's no point to re-flashing the custom kernel/SuperSU, since you should have LineageOS on your device. Do you have a TWRP backup you could restore before you tried to root? If not, then what's your device model number (and if you can remember it, what software channel you're on, e.g. retus, reteu etc). ?
Click to expand...
Click to collapse
Yes, everything was ok with the flash.
I am using lineage-14.1-20180516-nightly-athene-signed and twrp-3.2.1-0-athene. I didn't see any options to choose between 32 and 64 bit. (Download pages: https://download.lineageos.org/athene#!name https://eu.dl.twrp.me/athene/)
It doesn't matter how I try to boot (powerbutton, fastboot, recovery) I always directly end up in fastboot.
No I don't have a backup. When I got the device it was resetted so I saw no point in making one :/ It is an XT1622 and it should be reteu.
squanch123 said:
Yes, everything was ok with the flash.
I am using lineage-14.1-20180516-nightly-athene-signed and twrp-3.2.1-0-athene. I didn't see any options to choose between 32 and 64 bit. (Download pages: https://download.lineageos.org/athene#!name https://eu.dl.twrp.me/athene/)
It doesn't matter how I try to boot (powerbutton, fastboot, recovery) I always directly end up in fastboot.
No I don't have a backup. When I got the device it was resetted so I saw no point in making one :/ It is an XT1622 and it should be reteu.
Click to expand...
Click to collapse
Okay, so they should both be 32 bit, so no worries there. There do seem to be a few reports of boot issues on the more recent official LineageOS builds https://forum.xda-developers.com/moto-g4-plus/development/rom-cyanogenmod-14-1-t3522101/page280 but I don't know if they are still existing on the build you've flashed.
As it's likely your device has been reset when you flashed LineageOS (I don't know if there are still files on your internal storage, which you can view in TWRP, so back up if you do have files), you may wish to look into a stock firmware flash. Here's the April 2018 NPJS25.93-14-18 firmware, which appears to be the build released to EU devices: https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138 You do not have to re-lock your bootloader if you don't wish to - if you wish to leave your bootloader unlocked, then flash the stock firmware via fastboot with the following flashing commands:
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
Flashing these files via ADB should put a fresh copy of the latest firmware onto your device, which should then boot. If it does boot, then you can proceed with rooting (flash TWRP, then back up, then flash ElementalX or vegito, then flash SuperSU or magisk).
echo92 said:
Okay, so they should both be 32 bit, so no worries there. There do seem to be a few reports of boot issues on the more recent official LineageOS builds https://forum.xda-developers.com/moto-g4-plus/development/rom-cyanogenmod-14-1-t3522101/page280 but I don't know if they are still existing on the build you've flashed.
As it's likely your device has been reset when you flashed LineageOS (I don't know if there are still files on your internal storage, which you can view in TWRP, so back up if you do have files), you may wish to look into a stock firmware flash. Here's the April 2018 NPJS25.93-14-18 firmware, which appears to be the build released to EU devices: https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138 You do not have to re-lock your bootloader if you don't wish to - if you wish to leave your bootloader unlocked, then flash the stock firmware via fastboot with the following flashing commands:
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
Flashing these files via ADB should put a fresh copy of the latest firmware onto your device, which should then boot. If it does boot, then you can proceed with rooting (flash TWRP, then back up, then flash ElementalX or vegito, then flash SuperSU or magisk).
Click to expand...
Click to collapse
Thanks for the help!
I can boot the stock rom and I have root access. However if I start or shut down the device it goes to fastboot. From there I can boot or shut down the device and everything seems to work Do you know how I can boot directly without fastboot?
squanch123 said:
Thanks for the help!
I can boot the stock rom and I have root access. However if I start or shut down the device it goes to fastboot. From there I can boot or shut down the device and everything seems to work Do you know how I can boot directly without fastboot?
Click to expand...
Click to collapse
Hmm, try booting back to the bootloader, attach your device to your computer, then open ADB. In ADB, type 'fastboot oem fb_mode_clear' without the quotes. Press enter to submit, then reboot and see if your device boots to system rather than to fastboot.
This command should clear fastboot mode (though useful when flashing).
echo92 said:
Hmm, try booting back to the bootloader, attach your device to your computer, then open ADB. In ADB, type 'fastboot oem fb_mode_clear' without the quotes. Press enter to submit, then reboot and see if your device boots to system rather than to fastboot.
This command should clear fastboot mode (though useful when flashing).
Click to expand...
Click to collapse
Yes that worked
Thank you very much for your help :victory:
Got this working with Lineage ok but decided to go back to stock. I downloaded the stock recovery rom from NV and set everything up. Inside the recovery bundle is a bat file. Usually I would flash all files manually but this time I used the bat file. It manged the first 3 or 4 commands then came up with error. The box is now stuck in a boot loop and I am unable to access over adb.
Can anyone please suggest a way around this.
Thanks
Here is the bat file
fastboot flash staging blob
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash dtb mdarcy.dtb.img
fastboot flash vbmeta vbmeta.img
fastboot oem lock (optional step: required for certain functionality)
fastboot reboot
EDIT:
Eventually managed to flash lineage zip again. Used USB keyboard to access recovery
may i ask, what kind of keyboard did u use?
thanks in advance
Hi! My goal is to install twrp recovery on my Oneplus 6t but when i flash it with the command fastboot flash boot twrp.img it does just boot into fastboot mode and the OS is deleted. i can’t use the command fastboot flash recovery twrp.img because i believe i have an A/B Partitioned device because everytime i use this command it says soemthing like: can’t find recovery_a. I can‘t use the command fastboot boot twrp.img because everytime i use this command the phone is stuck on the fastboot splash screen. I need help!
You should flash a fastboot rom of your device to fix this problem
The command is fastboot boot twrp.img. You can only boot it not flash it from fastboot. Once In twrp you can make it permanent in the settings