Recoery bootloop - Samsung Galaxy S8 Questions and Answers

Hi guys,
My phone bootloops on recovery (see pic)
I can't get out it.
Sometimes it boots and get stuck on galaxy s8+ logo
When I force it on download mode, it does not manage to flash partitions with odin
long time on inializing and eventually fails to flash.
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
When I try to unplug and plug the device, windows states it's not recognized (while it was on com3 2 mins ago)
Could you help?

Related

[Q] Recovery flashing error

<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What can i do?
change to philz or twrp or chenglu...
rayman95 said:
change to philz or twrp or chenglu...
Click to expand...
Click to collapse
What is "chenglu"???
xSplashx said:
What is "chenglu"???
Click to expand...
Click to collapse
CWM....
From the beginning it was not installed any recovery, but I found the solution:
You need to be switched on and must be turned off the "reactivation lock".

marshmallow to stock (5.0), odin errors

Hi,
I have a n900w8 with some marshmallow rom (and some kernel I don't remember since I've already wiped all). I've downloaded a original stock rom from sammobile. Unfortunately, the latest version is a lollipop one, not a marshmallow one.
I've read that the bootloader cannot be downgraded after the 5.x. I think I have 5.x or higher bootloader. Are there any chance to install the custom rom? like this one(http://www.sammobile.com/firmwares/download/67302/N900UBUEBOK1_N900UUBEBOK1_UPO)
Kies3 says mi phone is not compatible with it, and kies "standard" doesn't recognise any device.
Odin gives me this error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I've read that editing the TAR file and remove some files (like the boot.img, cache.img, hidden.img. etc). I've tried removing several of them with same (or similar) results.
If I remove the boot.bin, I get this:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> cache.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
If I remove cache.img, I get:
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> hidden.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
If I remove hidden.bin:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
If I remove modem.bin:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> param.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I've restored a 4.4.4 backup with twrp before doing all that
I'm running out of ideas.
Thank you very much!
leitor79 said:
Hi,
I have a n900w8 with some marshmallow rom (and some kernel I don't remember since I've already wiped all). I've downloaded a original stock rom from sammobile. Unfortunately, the latest version is a lollipop one, not a marshmallow one.
I've read that the bootloader cannot be downgraded after the 5.x. I think I have 5.x or higher bootloader. Are there any chance to install the custom rom? like this one(http://www.sammobile.com/firmwares/download/67302/N900UBUEBOK1_N900UUBEBOK1_UPO)
Kies3 says mi phone is not compatible with it, and kies "standard" doesn't recognise any device.
Odin gives me this error:
I've read that editing the TAR file and remove some files (like the boot.img, cache.img, hidden.img. etc). I've tried removing several of them with same (or similar) results.
If I remove the boot.bin, I get this:
If I remove cache.img, I get:
If I remove hidden.bin:
If I remove modem.bin:
I've restored a 4.4.4 backup with twrp before doing all that
I'm running out of ideas.
Thank you very much!
Click to expand...
Click to collapse
frist of all do a full wipe (cache,dalvik,system,data)
secend flash last modem and bootloader 5.0 i think its PB1
third flash a stock rom
its must working
because i did it
Download the stock ROM for the sm-n900w8 from sammobile.com and flash it in Odin: http://www.sammobile.com/firmwares/database/SM-N900W8/
Flashing in Odin will wipe everything and you should do a factory wipe using stock recovery before booting the newly-flashed stock ROM for the first time.
Odin failed the first time because the ROM you tried to flash has a bootloader that is either not meant for your phone or the bootloader in the ROM is older than the bootloader in the phone. Look like you are flashing the n900 stock ROM, not the n900w8 ROM. You have a Canadian note 3? You can confirm the model # by booting into download mode.
Do nothing it's gonna flash it because I have incurred same problems while flashing from lollipop to kitkat but then I just slept at night and the next morning tried with another USB cable and it worked fine .
It's nothing to do with bootloader because every stock Rom contains bootloader and it will flash it anyhow.
Sent from my SM-N900 using Tapatalk

Odin fails when i try to revert to stock rom. S7 EDGE ATT(SM-G935A)

So basicly I rooted my phone like 3 days ago so yesterday since it was going slow and all. I was trying to revert from rooted 6.0.1 to stock 6.0.1 but I have literaly tried so much stock roms for att on the internet and it failed from model dismatch. But then I found one that matched and odin passed till it failed at system.img.ext4. Here is the log:
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And there is an error on the phone:
SW REV CHECK FAIL : [system]Fused 3 > Binary 1
Please help me I just got this one from insurance and if my dad finds out I broke it. I'm going to be toast!!!!
TheAndroidGuy101 said:
So basicly I rooted my phone like 3 days ago so yesterday since it was going slow and all. I was trying to revert from rooted 6.0.1 to stock 6.0.1 but I have literaly tried so much stock roms for att on the internet and it failed from model dismatch. But then I found one that matched and odin passed till it failed at system.img.ext4. Here is the log:
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And there is an error on the phone:
SW REV CHECK FAIL : [system]Fused 3 > Binary 1
Please help me I just got this one from insurance and if my dad finds out I broke it. I'm going to be toast!!!!
Click to expand...
Click to collapse
Same issue here, I think you need to find a more recent version of the file - which I can't find at the moment
did you not make a back up before rooting your phone , either on your phone or smart switch so that you can revert to stock rom if needed.
all threads advise backing before flashing in case some thing like this happens.
theandroidguy101 said:
so basicly i rooted my phone like 3 days ago so yesterday since it was going slow and all. I was trying to revert from rooted 6.0.1 to stock 6.0.1 but i have literaly tried so much stock roms for att on the internet and it failed from model dismatch. But then i found one that matched and odin passed till it failed at system.img.ext4. Here is the log:
<id:0/003> odin engine v(id:3.1203)..
<id:0/003> file analysis..
<id:0/003> setupconnection..
<id:0/003> initialzation..
<id:0/003> set pit file..
<id:0/003> do not turn off target!!
<id:0/003> get pit for mapping..
<id:0/003> firmware update start..
<id:0/003> singledownload.
<id:0/003> boot.img
<id:0/003> recovery.img
<id:0/003> system.img.ext4
<id:0/003> fail! (auth)
<id:0/003>
<id:0/003> complete(write) operation failed.
<osm> all threads completed. (succeed 0 / failed 1)
and there is an error on the phone:
Sw rev check fail : [system]fused 3 > binary 1
please help me i just got this one from insurance and if my dad finds out i broke it. I'm going to be toast!!!!
Click to expand...
Click to collapse
pm me! I just flashed my s7 at&t. I can send you the files

Help with unrooting s7edge G935P

So I wanted to root my phone tonight and thought I was doing everything right, well my phone rebooted and wouldn't connect to my carrier or anything and was checking device status the entire time..
So I decided to reboot and now I am just even more confused.. my phone at the current state is relooping into the recover reboot stage.. so I can't put the phone in USB debugging or anything like some post suggest..
I can get it to download mode but every time I try odin it fails and fails.. I have tried everything to my ability to get this phone to reboot on stock and I just cant seem to figure it out..
I am not to knowledgeable about ROM's and rooting and such and I learned my lesson.
When on the download screen is says at the bottom in red text " SW REV CHECK FAIL : [aboot] Fused 4 > Binary 2
This is the error code I get from Odin when trying to flash back to oem android on my S7 EDGE
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> lksecapp.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am more then open to any suggestions I just want my phone back lol

Failing to flash stock on ODIN

Hey there,
my galaxy s8 went into a bootloop after rooting with TWRP.
Currently on Android 8.0 and the cpu is Exynos.
After using Odin to reflash to stock android it failed numerous times.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5869 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Using Odin v3.13.1
marky2458 said:
Hey there,
my galaxy s8 went into a bootloop after rooting with TWRP.
Currently on Android 8.0 and the cpu is Exynos.
After using Odin to reflash to stock android it failed numerous times.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5869 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Using Odin v3.13.1
Click to expand...
Click to collapse
Are you using correct firmware for your phone and region or maybe trying to use older version of firmware than what's on your phone.

Categories

Resources