Related
Hello im working with a developer to make an app, and this is her response. I am hoping someone can chime in and give me some guidance i can pass along, where she might look in order to solve our task of auto-answering
we used to evoke 'Action Answer' modules but this feature has been revoked by the Android community as the community states it as a breach of privacy.
Click to expand...
Click to collapse
So what info can i give her, to guide in creating the auto-answer?
Thank you
Can anyone confirm if its still possible to have an app auto-answer an incoming call?
Thank you all, in a bind sorry for the bump
rsarno said:
Can anyone confirm if its still possible to have an app auto-answer an incoming call?
Thank you all, in a bind sorry for the bump
Click to expand...
Click to collapse
I do not have any info, only another question - If you do move forward, it would also help me in my quest: Using the 'Volume Up' key to answer the phone call ( thread here: http://forum.xda-developers.com/showthread.php?t=909172 )
I assume they would need similar answering capabilities ....
i dont see why its a breach of privacy, when the owner of the phone is the one who installs the app. If someone were to install the app on a phone they dont own it would be pretty obvious to the owner something is wrong.
But why not install the app with auto answer turned off as a default, forcing the user to turn it on manually and even stating to them a privacy statement explaing the operation and asking are you sure you wanna do this, maybe even adding a sercurity code for approval.
FreeTheWorld said:
i dont see why its a breach of privacy, when the owner of the phone is the one who installs the app. If someone were to install the app on a phone they dont own it would be pretty obvious to the owner something is wrong.
But why not install the app with auto answer turned off as a default, forcing the user to turn it on manually and even stating to them a privacy statement explaing the operation and asking are you sure you wanna do this, maybe even adding a sercurity code for approval.
Click to expand...
Click to collapse
Our challenge is finding the way to actually do it, to have the phone auto answer. At this point the client is not concerned with privacy, for reasons you listed.
One positive is that i see there is an app called AutoAnswer which (based on reviews) was functional as of 10 days ago. If they can do it, we can do it.
Its just my developer is challenged by what methods to use, or whatever, to invoke the "Answer" action
You can try the following code, but I didn't test it myself (and you need ITelephony.aidl from Android sources)
Code:
TelephonyManager tm =
(TelephonyManager)context.getSystemService(Context.TELEPHONY_SERVICE);
Class clazz = Class.forName(tm.getClass().getName());
Method m = clazz.getDeclaredMethod("getITelephony");
m.setAccessible(true);
ITelephony it = (ITelephony) m.invoke(tm);
it.answerRingingCall();
thanks, i will try!
vvv.androlib.com/android.application.pl-apps4android-nacm-zmipE.aspx where vvv is instead www
"Not Another Call Manager" NACM
tested before 10 Minutes on G1 with Biffmod 2.2
you can find it on the Market
xektop said:
vvv.androlib.com/android.application.pl-apps4android-nacm-zmipE.aspx where vvv is instead www
"Not Another Call Manager" NACM
tested before 10 Minutes on G1 with Biffmod 2.2
you can find it on the Market
Click to expand...
Click to collapse
He was looking for API, not for ready app. Or you propose to decompile this app and look at the code?
rwxer said:
He was looking for API, not for ready app. Or you propose to decompile this app and look at the code?
Click to expand...
Click to collapse
An API or a method of doing it via code.
Client is about to walk, because we cannot find a solution.
Need to answer the call automatically based on conditions. Not using Bluetooth, just as if you hit the "Accept" button on the handset, and it connects the call
Still not able to find a solution. Any ideas?
So answerRingingCall() method is not working?
Hi,
I'm having issue his morning for making a phone call. When I'm trying to dial a contact number it goes directly to call ended. Anyone have an idea? Thanks
Sent from my SM-G900W8 using Tapatalk
Found the issue, I was messing with the option 2263. Put it back to default.
Topic can be closed.
xaznxplaya said:
Found the issue, I was messing with the option 2263. Put it back to default.
Topic can be closed.
Click to expand...
Click to collapse
I have same problem, can you explain this "Option 2263" please?
Thank you.
Hi everyone,
I've got an ATT I337 running the awesome Hyperdrive ROM version 17.1. Several of us --but clearly not all of us!-- over in that thread have noticed a problem with incoming calls. I think there's a setting somewhere that can fix it, so I'm opening it to a wider audience by posting it here, in hopes someone from this group will know what to tweak.
Here's the specific problem.
If my cell phone receives a call from a known contact "Bob" and Bob's contact info (being a U.S. phone number) is 317-555-1212, so far the phone seems to recognize the call as coming from Bob. However, it reports it as coming from +317-555-1212. When I go into the call log and try to return the call, it dials +317-555-1212, and the extra + causes the system to interpret it as an international call attempt, and the call fails. Cannot be completed as dialed, the message says. If it's an non-contact number, the + is still added. IT's not JUST for contacts.
Let's say Bob leaves a message. The voicemail indicator shows and it says offers to dial *86, the correct access code for voice mail for ATT as I understand it. However, tapping that actually dialed +11 then my ten digit phone number. Call fails.
At the dialpad, pressing and holding 1 to invoke voicemail has the same problem.
In Contacts, contacts are NOT listed with +s, and clicking the call button for them makes them dial OK without a + being prepended.
So, this looks like some international feature is being enabled that I'm not sure how to turn off. Does anyone have any idea how to turn this off? Sorta puts a crimp in the basic phone functionality. Seriously, who actually calls anyone these days? But it would be good to fix.
Please, if anyone has an idea of what might be at the root of this, I would appreciate your help!
Marc
I am confused. Does this only happen on the Hyper rom or all roms for you.
Not sure how anyone else does their contacts. But, I always enter numbers as 1-555-555-5555 even if local.
My voicemail number is set as +15555555555
I never had issues--
I remember some talk of that on Hyper awhile back. But, never paid attention--
Only happens on Hyperdrive. Or at least, I can say I never saw it on stock. Hyper is the only ROM I've actually gotten so far as to run while SIM card is inserted. :good:
My contacts are almost all US based and are just ten digits, no leading 1. I did try editing the contact to my work cell phone by adding a 1 to it, and calling my S4 phone. It still was registered as +317-555-1212 format and return call didn't work.
So, it's not really about the way the contacts are stored, more about how the phone interprets incoming calls.
Try the 1+ and see what happens. Just do a few of your most used numbers to start--
Can you put a different dialer on phone and see
rugmankc said:
Try the 1+ and see what happens. Just do a few of your most used numbers to start--
Can you put a different dialer on phone and see
Click to expand...
Click to collapse
Just edited above, adding 1 to the way contacts are stored doesn't change the behavior. I can certainly try a different dialer and see what happens, but it seems to be based on how incoming calls are interpreted. I'm guessing there's a build.prop item or somesuch that needs a-tweaking.
Marc
so you changed the contact number to 1-555-555-5555 with hyphens
i ran hyper for quite a bit awhile back never any issues. of course could be something new--
i am not thinking rom or a lot more would have issue--
I did some tests.
On the phone in question, I edited the google contact for a test phone number. I then called the phone from that tested phone number.
It didn't matter whether the contact was saved in the formats:
317-555-1212
1-317-555-1212
+1-317-555-1212
+317-555-1212
In all cases, the incoming call was recognized as +317-555-1212, which isn't a valid call-back number, and return calls failed. Since this only happened when I put a custom ROM on, I'm sure it's something buried inside the ROM. However, I'm at a loss as to where to check various settings.
Gotta be something deep in there...
If all else fails you can Odin back to stock, reformat your internal card and reroot.
Under Phone Settings/Additional Settings/My Phone Number--is it in format 15555555555
Also, and I don't know where to check, your country code may not be set. I don't know if we even have that setting anymore or would it be in Build Prop.
Probably under ro.something
rugmankc said:
If all else fails you can Odin back to stock, reformat your internal card and reroot.
Under Phone Settings/Additional Settings/My Phone Number--is it in format 15555555555
Also, and I don't know where to check, your country code may not be set. I don't know if we even have that setting anymore or would it be in Build Prop.
Probably under ro.something
Click to expand...
Click to collapse
Interesting thought. I had gone into the dialer settings, and checked the Current Country... it listed United States of America. Then I stopped. But looking further it turns out that in the Assisted Dialing settings just below that, there might be stuff that matters. Currently my assisted dialing is OFF. The settings inside are:
Country code: 1
IDD prefix: 011
NDD prefix 1
City/area code: 131
National number length: 11
The area code probably doesn't matter, but I'm interested in the national number length. Ours tend to be 10. Could you please see what your settings are in there, and let me know if anything is different?
I can always backup (ug, safestrap backup), return to stock, poke around, re-root/restore. But if you could take a quick peek I'd be grateful.
Thank you!
Marc
I tried an alternative dialer... it acted just like the stock with the + thing.
I am on a rom that doesn't have those settings--sorry
Thanks anyway! I experimented changing the last setting to 10, and enabling assisted dialing, and it didn't change anything. Sigh.
Ok, you can still go back to stock with Odin. Or, try one of iB's roms they are very good too, I use them almost exclusively now--
Good Luck--:good:
Yeah. I've been back to stock a couple times with Odin. I've got the process down pat! I prefer the hyperdrive rom if I can work through the few small warts. It's just such an elegantly crafted piece of work. Worth the effort, if I eventually sort out the call issue. Appreciate your help.
Sent from my SCH-I337 using Tapatalk
Frankenscript said:
Yeah. I've been back to stock a couple times with Odin. I've got the process down pat! I prefer the hyperdrive rom if I can work through the few small warts. It's just such an elegantly crafted piece of work. Worth the effort, if I eventually sort out the call issue. Appreciate your help.
Sent from my SCH-I337 using Tapatalk
Click to expand...
Click to collapse
i got the same problem too. We'll get it figured out!
Damani311 said:
i got the same problem too. We'll get it figured out!
Click to expand...
Click to collapse
I figured out the clock on status bar thing. Like someone else said it was under the alignment options ... hidden by default. One by one warts going away.
Sent from my SCH-I337 using Tapatalk
Have the same issue here ..can't dial vm..on hyper
Sent from my SCH-I545 using XDA Premium 4 mobile app
jshua said:
Have the same issue here ..can't dial vm..on hyper
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If you haven't done so yet i suggest noting the issue in the hyper thread ... either the Verizon or att one depending on your phone. Seems to be a bunch of us... more folks report it the common thread will emerge.
Sent from my SCH-I337 using Tapatalk
Same issue here i can not dial voicemail and can not call a number back without typing the number in manually. Deal breaker for me hope it gets fixed soon so i can go back to Hyperdrive. Or somebody comes up with some sort of fix.
Download Prefixer and remove the + for outgoing call
BBG037 said:
Download Prefixer and remove the + for outgoing call
Click to expand...
Click to collapse
When I get back from vacation I will have to try this. Thanks!
Hi. This is first time I see on Android, why these button missing?
You can see issue on picture.
https://db.tt/DZFk4TfG
I think this is a feature/change of lollipop, I'm sure I read it somewhere, although I can't find it..
I don't think so, I was using S6 without edge, running on lollipop 5.1.1 and that buttons always appears.
troxter said:
I don't think so, I was using S6 without edge, running on lollipop 5.1.1 and that buttons always appears.
Click to expand...
Click to collapse
I'm using edge plus since 31.08.15, never seen that option, neither on mm. I love that feature btw, would be nice if possible.
I noticed this same thing on my S7 and found a suggestion here for an app called "Better Open With". It gives you the option to use it as default, then gives you app options. Also has a countdown and pause built in. Great little app to fix something they should have just left alone.
Missing "just once" option for picking apps
I'm getting the same problem. Some videos on my device work better with a specific app, other videos with another app, so I like to be able to choose between two apps for opening a file. My Galaxy S7 with Android Marshmallow has removed that option, and it's extremely irritating, not to mention time consuming, to have to go in a manually clear the default app. Maybe Google should include a function where if you long-press on a file, one of your selections will be "Open with ..." like on Windows.
troxter said:
Hi. This is first time I see on Android, why these button missing?
You can see issue on picture.
https://db.tt/DZFk4TfG
Click to expand...
Click to collapse
hi
could you help me?
is dual sim edge + supports two sim regarding CALL receiving? I mean, while I speak on SIM1, can I receive CALL WAITING(forwarding?) within that call duration?
at least a BEEP or someting, that SIM2 is just about to receive a call, WHAT I can answare, by HOLDING the calling on SIM1?
thanx
tiborprogmed said:
hi
could you help me?
is dual sim edge + supports two sim regarding CALL receiving? I mean, while I speak on SIM1, can I receive CALL WAITING(forwarding?) within that call duration?
at least a BEEP or someting, that SIM2 is just about to receive a call, WHAT I can answare, by HOLDING the calling on SIM1?
thanx
Click to expand...
Click to collapse
If Your network provider on both SIMs, support call forwarding, it will work without any problems. May cost You a bit.
Quick Note before you start this - If you are on stable one UI 3.x / Android 11 or greater, see the bottom of the post to see the workaround. Thanks to @knuschit
Introduction - If you have ever bought a device that comes locked with the carrier you will see there are some carrier baked features missing in unlocked devices. While putting in your sim will change CSC of your device you might still not get all the features. So far i fail to understand why would device makers and Carriers make it so difficult for users. I have scourged through so many forums and found info like these where a t-mobile rep responds saying there is no way those features can be added to non carrier branded device ( Either a blatant lie or the reps are ill informed or both).
My Device - Unlocked SM-N986U1 with tmobile sim - CSC - TMB/TMB/XAA
Problem Statement- I want Video calling over LTE and RCS features.
Solution - Follow the steps carefully and also see the attached screenshots -
There are other ways of doing this by creating shortcut to ims service settings but i am posting something that most users can easily do.
Quick Pre-Check - Before starting if you have been using RCS on Google Messages you might want to de-register. Follow the process here: https://messages.google.com/disable-chat.
You can always activate it in case you want to go back to RCS on google messages.
This will only work if you are on Android 10, or the Beta version of Android 11. Samsung has blocked this on Stable Android 11.
STEPS1. Download and install Phone app (By google)
2. Open the phone App that you just downloaded and make it your default Phone app.
3. Dial *#*#467#*#*
4. You will see the settings as in my Screenshot 1
5. Tap on IMS Service Switch (The first Option)
In case you cant see the screenshot - Just tap on the first option IMS service Switch, Then make sure MMTEL Switch and RCS Switch is toggled on.
If you see below RCS Switch there is a section titled MMTEL
Sub-options of MMTEL are
VoLTE
VoLTE-Video
VoLTE-Call-Composer
SMS over IP
Supplementary Services
Called Dial Third Party Number
JUST TURN ALL THESE TOGGLES ON
Click to expand...
Click to collapse
6. See the Screenshot 2 and move all the switches to ON.
7. Go back to main page and then go to RCS Configuration settings and make sure they are selected to be always on as in Screenshot 3.
8. I changed back to default phone app after this.
9. And done you should have the video calling over LTE to fellow T-Mobile users activated now.
I have already made a few calls and tested it and can confirm that this works. This might work for Sprint too.
NOTE THAT - Default video call on contacts is still duo. you have to make a regular voice call to a contact first then you will see the native video call icon.
These settings wont stick after OS/Firmware update via Odin, OTA or Sideload and steps would need to be repeated.
Edit Update -You can See all three screenshots together here.
Let us know how it goes here and if you explored any more settings and i will update this post with due credit.
WORKAROUND: SINCE THE ABOVE METHOD IS NOT WORKING ON ONE UI 3.X / Android 11The conventional method doesnt work on Android 11 so use the method below:
1. Install Alliance Shield X >> Create account and Give necessary permissions
2. Open Alliance Shield X settings and toggle New App Manager Layout On
3. Look at this post and follow
4. See the Screenshot 2 and move all the switches to ON.
5. Go back to main page and then go to RCS Configuration settings and make sure they are selected to be always on as in Screenshot 3.
I can confirm this works.
ADDITIONAL CONFIRMED INFO FROM USERS / TROUBLESHOOTING
Try the following step in case you had RCS activated on Google Messages and doing the above steps does not get you RCS in the Native SMS App. Thanks @Compusmurf
Compusmurf said:
Also, might add. IF you were previously using Google messages, then you do this, you probably will have to UNREGISTER from Google Messages for Samsung Messages to pick up RCS.....
https://messages.google.com/disable-chat
Click to expand...
Click to collapse
Confirmed to be working for ATT
clownin72 said:
I have U1 on ATT prepaid so I don't have advanced messaging features, tried this method and now I do. Thanks
Sent from my SM-N986U1 using Tapatalk
Click to expand...
Click to collapse
It works for other phones too
dominicmcintire said:
I just followed these steps this morning on an unlocked Samsung A51 and it has worked great!
Click to expand...
Click to collapse
Hi, there is no screenshots attached.
Phariex said:
Hi, there is no screenshots attached.
Click to expand...
Click to collapse
Sorry was having a lot of trouble posting screenshots check now i have linked those now.
The screenshot size is really small and I can't read the text on them. Can you upload those with high quality? or bigger size? Thanks!
Phariex said:
The screenshot size is really small and I can't read the text on them. Can you upload those with high quality? or bigger size? Thanks!
Click to expand...
Click to collapse
You dont really need to see the screenshot its just to give you an idea but i tried changing the ones with bigger fonts hope its readable now.
What specifically has to be on to get native video calling? Got RCS using this method from another post, but video calling still uses duo.
Cindysmith0994 said:
What specifically has to be on to get native video calling? Got RCS using this method from another post, but video calling still uses duo.
Click to expand...
Click to collapse
If you see below RCS there is a section titled MMTEL
MMTEL - Suboptions of MMTEL are
VoLTE
VoLTE-Video
VoLTE-Call-Composer
SMS over IP
Supplementary Services
Called Dial Third Party Number
I have swited on all the options but for Video you mainly need VoLTE, VoLTE-Video and VoLTE-Call-Composer to be toggled on.
Also this site is further compressing the pictures hence you guys cant see. when i get time i will upload to some pic sharing site.
I have an unlocked phone from EE in UK and this doesn't work for me
warriorvibhu said:
If you see below RCS there is a section titled MMTEL
MMTEL - Suboptions of MMTEL are
VoLTE
VoLTE-Video
VoLTE-Call-Composer
SMS over IP
Supplementary Services
Called Dial Third Party Number
I have swited on all the options but for Video you mainly need VoLTE, VoLTE-Video and VoLTE-Call-Composer to be toggled on.
Also this site is further compressing the pictures hence you guys cant see. when i get time i will upload to some pic sharing site.
Click to expand...
Click to collapse
Thanks, all were all toggled on already. Still uses duo. Guess I can live with it.
Cindysmith0994 said:
Thanks, all were all toggled on already. Still uses duo. Guess I can live with it.
Click to expand...
Click to collapse
The default on contacts will still show duo. Make a regular voice call and then you will see the native video call icon wait i will show you as you can SEE HERE
As soon as the person answers the option to toggle to video is activated in the first row center icon. Let me know if that is the same for you and works.
It used to be a call hold icon earlier before we toggled the IMS settings.
warriorvibhu said:
The default on contacts will still show duo. Make a regular voice call and then you will see the native video call icon wait i will show you as you can SEE HERE
As soon as the person answers the option to toggle to video is activated in the first row center icon. Let me know if that is the same for you and works.
It used to be a call hold icon earlier before we toggled the IMS settings.
Click to expand...
Click to collapse
I don't have the option to make a regular video call. After I place a voice call, the native video call button appears on the dialer screen with the active call, but it's greyed out.
Cindysmith0994 said:
I don't have the option to make a regular video call. After I place a voice call, the native video call button appears on the dialer screen with the active call, but it's greyed out.
Click to expand...
Click to collapse
The other person needs to have that option too (Why not just call me), JK sorry dont know how to help you here. if you know someone who got S8, S9, S10, S20, Note 8, 9, 10 or 20 phones directly from TMobile call them and since they would already have it yours wont be grayed out anymore.
warriorvibhu said:
Introduction - If you have ever bought a device that comes locked with the carrier you will see there are some carrier baked features missing in unlocked devices. While putting in your sim will change CSC of your device you might still not get all the features. So far i fail to understand why would device makers and Carriers make it so difficult for users. I have scourged through so many forums and found info like these where a t-mobile rep responds saying there is no way those features can be added to non carrier branded device ( Either a blatant lie or the reps are ill informed or both).
My Device - Unlocked SM-N986U1 with tmobile sim - CSC - TMB/TMB/XAA
Problem Statement- I want Video calling over LTE and RCS features.
Solution - Follow the steps carefully and also see the attached screenshots -
There are other ways of doing this by creating shortcut to ims service settings but i am posting something that most users can easily do.
1. Download and install Phone app (By google)
2. Open the phone App that you just downloaded and make it your default Phone app.
2. Dial *#*#467#*#*
3. You will see the settings as in my Screenshot 1
4. Tap on IMS Service Switch (The first Option)
5. See the screenshot 2 and move all the switches to ON - My video share was on, it turned off while taking screenshot so make it on too.
6. Go back to main page and then go to RCS Configuration settings and make sure they are selected to be always on as in Screenshot 3.
7. I changed back to default phone app after this.
8. And done you should have the video calling over LTE to fellow T-Mobile users activated now.
I have already made a few calls and tested it and can confirm that this works. This might work for Sprint too.
Let us know how it goes here and if you explored any more settings and i will update this post with due credit.
NOTE THAT - Default video call on contacts is still duo. you have to make a regular voice call to a contact first then you will see the native video call icon.
Screenshot 1
ScreenShot 2
ScreenShot 3
Click to expand...
Click to collapse
Dial *#*#467*#*#
USSD code running
Unable to process the request
Please tell me why.
Sent from my SM-N986U1 using Tapatalk
eric6268 said:
Dial *#*#467*#*#
USSD code running
Unable to process the request
Please tell me why.
Sent from my SM-N986U1 using Tapatalk
Click to expand...
Click to collapse
Because You dialed wrong code you dialed *#*#467*#*# please check what i asked to dial.
I have a U.S t-mobile branded phone (AT15 ; Sep security patch)and use the Samsung stock messaging app. I have been hoping for RCS to be enabled but that hasn't happened yet. I know google messaging has this feature but I prefer to stick with my current stock samsung messaging app. Will following your method help me in activating RCS? Thanks!
dj24 said:
I have a U.S t-mobile branded phone (AT15 ; Sep security patch)and use the Samsung stock messaging app. I have been hoping for RCS to be enabled but that hasn't happened yet. I know google messaging has this feature but I prefer to stick with my current stock samsung messaging app. Will following your method help me in activating RCS? Thanks!
Click to expand...
Click to collapse
Yes it will and i can confirm i checked and it is working. I see when my friend with RCS activated is typing. So typing indicators are working a big sign that RCS is working.
To verify before you do any of the above steps open your default Samsung SMS app and go to settings by clicking on 3 dots on top right, do you see an option called 'Chat Settings' if not, once you have gone through the suggested steps above you will see chat settings activated meaning RCS working.
Also, might add. IF you were previously using Google messages, then you do this, you probably will have to UNREGISTER from Google Messages for Samsung Messages to pick up RCS.....
https://messages.google.com/disable-chat
Compusmurf said:
Also, might add. IF you were previously using Google messages, then you do this, you probably will have to UNREGISTER from Google Messages for Samsung Messages to pick up RCS.....
https://messages.google.com/disable-chat
Click to expand...
Click to collapse
Thank you, this was the part I was missing.
Compusmurf said:
Also, might add. IF you were previously using Google messages, then you do this, you probably will have to UNREGISTER from Google Messages for Samsung Messages to pick up RCS.....
https://messages.google.com/disable-chat
Click to expand...
Click to collapse
Thank you for this information i will add it to 1st Post
knuschit said:
Thank you, this was the part I was missing.
Click to expand...
Click to collapse
Thanks for confirming.
I did all this a week or 2 back to mine and my granddaughters phones.
I didn't do any kind of writeup because this info has been out there in the wild, just not overly shared because there are other options in that menu that can wreck your phone experience.
Glad someone did.
(Note to folks, don't go randomly changing things here if you don't know what they are and haven't been validated by others)
Since you did so good here, you should write a document for folks how to "update" using FRIJA and ODIN for folks with U1 devices. Maybe that'll cut down on the folks that complain that they can't get Month X security update because Carrier Y is slow.
I know how, but writing a document step by step isn't the same and I'm very bad at documentation.